/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <TextObjectBar.hxx>
#include <svx/svxids.hrc>
#include <editeng/editview.hxx>
#include <editeng/editeng.hxx>
#include <editeng/unolingu.hxx>
#include <editeng/outliner.hxx>
#include <editeng/ulspitem.hxx>
#include <editeng/lspcitem.hxx>
#include <editeng/adjustitem.hxx>
#include <vcl/vclenum.hxx>
#include <sfx2/app.hxx>
#include <svl/whiter.hxx>
#include <svl/itempool.hxx>
#include <svl/style.hxx>
#include <sfx2/tplpitem.hxx>
#include <sfx2/request.hxx>
#include <sfx2/viewfrm.hxx>
#include <sfx2/dispatch.hxx>
#include <editeng/escapementitem.hxx>
#include <editeng/wghtitem.hxx>
#include <editeng/postitem.hxx>
#include <editeng/udlnitem.hxx>
#include <editeng/crossedoutitem.hxx>
#include <editeng/contouritem.hxx>
#include <editeng/shdditem.hxx>
#include <svx/xtable.hxx>
#include <svx/svdobj.hxx>
#include <editeng/outlobj.hxx>
#include <editeng/flstitem.hxx>
#include <svl/intitem.hxx>
#include <editeng/scripttypeitem.hxx>
#include <svx/svdoutl.hxx>
#include <editeng/writingmodeitem.hxx>
#include <editeng/frmdiritem.hxx>
#include <svl/itemiter.hxx>
#include <editeng/cmapitem.hxx>
#include <app.hrc>
#include <strings.hrc>
#include <sdresid.hxx>
#include <prlayout.hxx>
#include <ViewShell.hxx>
#include <drawview.hxx>
#include <drawdoc.hxx>
#include <sdpage.hxx>
#include <stlpool.hxx>
#include <stlsheet.hxx>
#include <OutlineView.hxx>
#include <Window.hxx>
#include <futempl.hxx>
#include <DrawDocShell.hxx>
#include <Outliner.hxx>
#include <futext.hxx>
#include <memory>
namespace sd {
/**
* Process SfxRequests
*/
void TextObjectBar::Execute( SfxRequest &rReq )
{
const SfxItemSet* pArgs = rReq.GetArgs();
const SfxPoolItem* pPoolItem = nullptr;
sal_uInt16 nSlot = rReq.GetSlot();
OutlinerView* pOLV = mpView->GetTextEditOutlinerView();
std::unique_ptr<OutlineViewModelChangeGuard, o3tl::default_delete<OutlineViewModelChangeGuard>> aGuard;
if( dynamic_cast< const OutlineView *>( mpView ) != nullptr)
{
pOLV = static_cast<OutlineView*>(mpView)
->GetViewByWindow(mpViewShell->GetActiveWindow());
aGuard.reset( new OutlineViewModelChangeGuard( static_cast<OutlineView&>(*mpView) ) );
}
switch (nSlot)
{
case SID_STYLE_APPLY:
{
if( pArgs )
{
SdDrawDocument& rDoc = mpView->GetDoc();
assert(mpViewShell->GetViewShell());
rtl::Reference<FuPoor> xFunc( FuTemplate::Create( mpViewShell, static_cast< ::sd::Window*>( mpViewShell->GetViewShell()->GetWindow()), mpView, &rDoc, rReq ) );
if(xFunc.is())
{
xFunc->Activate();
xFunc->Deactivate();
if( rReq.GetSlot() == SID_STYLE_APPLY )
{
if (mpViewShell->GetViewFrame())
mpViewShell->GetViewFrame()->GetBindings().Invalidate( SID_STYLE_APPLY );
}
}
}
else
{
if( mpViewShell && mpViewShell->GetViewFrame() )
mpViewShell->GetViewFrame()->GetDispatcher()->Execute( SID_STYLE_DESIGNER, SfxCallMode::ASYNCHRON );
}
rReq.Done();
}
break;
case SID_PARASPACE_INCREASE:
case SID_PARASPACE_DECREASE:
{
if( pOLV )
{
ESelection aSel = pOLV->GetSelection();
aSel.Adjust();
sal_Int32 nStartPara = aSel.nStartPara;
sal_Int32 nEndPara = aSel.nEndPara;
if( !aSel.HasRange() )
{
nStartPara = 0;
nEndPara = pOLV->GetOutliner()->GetParagraphCount() - 1;
}
for( sal_Int32 nPara = nStartPara; nPara <= nEndPara; nPara++ )
{
SfxStyleSheet* pStyleSheet = nullptr;
if (pOLV->GetOutliner() != nullptr)
pStyleSheet = pOLV->GetOutliner()->GetStyleSheet(nPara);
if (pStyleSheet != nullptr)
{
SfxItemSet aAttr( pStyleSheet->GetItemSet() );
SfxItemSet aTmpSet( pOLV->GetOutliner()->GetParaAttribs( nPara ) );
aAttr.Put( aTmpSet, false ); // sal_False= InvalidItems is not default, handle it as "holes"
const SvxULSpaceItem& rItem = aAttr.Get( EE_PARA_ULSPACE );
std::unique_ptr<SvxULSpaceItem> pNewItem(static_cast<SvxULSpaceItem*>(rItem.Clone()));
long nUpper = pNewItem->GetUpper();
if( nSlot == SID_PARASPACE_INCREASE )
nUpper += 100;
else
{
nUpper -= 100;
nUpper = std::max<long>( nUpper, 0 );
}
pNewItem->SetUpper( static_cast<sal_uInt16>(nUpper) );
long nLower = pNewItem->GetLower();
if( nSlot == SID_PARASPACE_INCREASE )
nLower += 100;
else
{
nLower -= 100;
nLower = std::max<long>( nLower, 0 );
}
pNewItem->SetLower( static_cast<sal_uInt16>(nLower) );
SfxItemSet aNewAttrs( aAttr );
aNewAttrs.Put( *pNewItem );
pNewItem.reset();
pOLV->GetOutliner()->SetParaAttribs( nPara, aNewAttrs );
}
}
}
else
{
// the following code could be enabled, if I get a correct
// DontCare status from JOE.
// gets enabled, through it doesn't really work (see above)
SfxItemSet aEditAttr( mpView->GetDoc().GetPool() );
mpView->GetAttributes( aEditAttr );
if( aEditAttr.GetItemState( EE_PARA_ULSPACE ) >= SfxItemState::DEFAULT )
{
SfxItemSet aNewAttrs(*(aEditAttr.GetPool()), aEditAttr.GetRanges());
const SvxULSpaceItem& rItem = aEditAttr.Get( EE_PARA_ULSPACE );
std::unique_ptr<SvxULSpaceItem> pNewItem(static_cast<SvxULSpaceItem*>( rItem.Clone() ));
long nUpper = pNewItem->GetUpper();
if( nSlot == SID_PARASPACE_INCREASE )
nUpper += 100;
else
{
nUpper -= 100;
nUpper = std::max<long>( nUpper, 0 );
}
pNewItem->SetUpper( static_cast<sal_uInt16>(nUpper) );
long nLower = pNewItem->GetLower();
if( nSlot == SID_PARASPACE_INCREASE )
nLower += 100;
else
{
nLower -= 100;
nLower = std::max<long>( nLower, 0 );
}
pNewItem->SetLower( static_cast<sal_uInt16>(nLower) );
aNewAttrs.Put( *pNewItem );
pNewItem.reset();
mpView->SetAttributes( aNewAttrs );
}
}
rReq.Done();
Invalidate();
// to refresh preview (in outline mode), slot has to be invalidated:
mpViewShell->GetViewFrame()->GetBindings().Invalidate( SID_PREVIEW_STATE, true );
}
break;
case SID_OUTLINE_LEFT:
{
if (pOLV)
{
pOLV->AdjustDepth( -1 );
// Ensure bold/italic etc. icon state updates
Invalidate();
// trigger preview refresh
mpViewShell->GetViewFrame()->GetBindings().Invalidate( SID_PREVIEW_STATE, true );
}
rReq.Done();
}
break;
case SID_OUTLINE_RIGHT:
{
if (pOLV)
{
pOLV->AdjustDepth( 1 );
// Ensure bold/italic etc. icon state updates
Invalidate();
// trigger preview refresh
mpViewShell->GetViewFrame()->GetBindings().Invalidate( SID_PREVIEW_STATE, true );
}
rReq.Done();
}
break;
case SID_ATTR_PARA_LRSPACE:
{
SvxLRSpaceItem aLRSpace = static_cast<const SvxLRSpaceItem&>(pArgs->Get(
GetPool().GetWhich(SID_ATTR_PARA_LRSPACE)));
SfxItemSet aEditAttr( GetPool(), svl::Items<EE_PARA_LRSPACE, EE_PARA_LRSPACE>{} );
aLRSpace.SetWhich( EE_PARA_LRSPACE );
aEditAttr.Put( aLRSpace );
mpView->SetAttributes( aEditAttr );
Invalidate(SID_ATTR_PARA_LRSPACE);
}
break;
case SID_HANGING_INDENT:
{
SfxItemSet aLRSpaceSet( GetPool(), svl::Items<EE_PARA_LRSPACE, EE_PARA_LRSPACE>{} );
mpView->GetAttributes( aLRSpaceSet );
SvxLRSpaceItem aParaMargin( aLRSpaceSet.Get( EE_PARA_LRSPACE ) );
SvxLRSpaceItem aNewMargin( EE_PARA_LRSPACE );
aNewMargin.SetTextLeft( aParaMargin.GetTextLeft() + aParaMargin.GetTextFirstLineOfst() );
aNewMargin.SetRight( aParaMargin.GetRight() );
aNewMargin.SetTextFirstLineOfst( ( aParaMargin.GetTextFirstLineOfst() ) * -1 );
aLRSpaceSet.Put( aNewMargin );
mpView->SetAttributes( aLRSpaceSet );
Invalidate(SID_ATTR_PARA_LRSPACE);
}
break;
case SID_OUTLINE_UP:
{
if (pOLV)
{
pOLV->AdjustHeight( -1 );
// trigger preview refresh
mpViewShell->GetViewFrame()->GetBindings().Invalidate( SID_PREVIEW_STATE, true );
}
rReq.Done();
}
break;
case SID_OUTLINE_DOWN:
{
if (pOLV)
{
pOLV->AdjustHeight( 1 );
// trigger preview refresh
mpViewShell->GetViewFrame()->GetBindings().Invalidate( SID_PREVIEW_STATE, true );
}
rReq.Done();
}
break;
case SID_TEXTDIRECTION_LEFT_TO_RIGHT:
case SID_TEXTDIRECTION_TOP_TO_BOTTOM:
{
mpView->SdrEndTextEdit();
SfxItemSet aAttr( mpView->GetDoc().GetPool(), svl::Items<SDRATTR_TEXTDIRECTION, SDRATTR_TEXTDIRECTION>{} );
aAttr.Put( SvxWritingModeItem(
nSlot == SID_TEXTDIRECTION_LEFT_TO_RIGHT ?
css::text::WritingMode_LR_TB : css::text::WritingMode_TB_RL,
SDRATTR_TEXTDIRECTION ) );
rReq.Done( aAttr );
mpView->SetAttributes( aAttr );
Invalidate();
mpViewShell->GetViewFrame()->GetBindings().Invalidate( SID_PREVIEW_STATE, true );
}
break;
case FN_NUM_BULLET_ON:
{
if (pOLV)
{
bool bMasterPage = false;
SdrPageView* pPageView = mpView->GetSdrPageView();
if (pPageView)
{
SdPage* pPage = static_cast<SdPage*>(pPageView->GetPage());
bMasterPage = pPage && (pPage->GetPageKind() == PageKind::Standard) && pPage->IsMasterPage();
}
if (!bMasterPage)
pOLV->ToggleBullets();
else
{
//Resolves: fdo#78151 in master pages if we toggle bullets on
//and off then just disable/enable the bulleting, but do not
//change the *level* of the paragraph, because the paragraph is
//effectively a preview of the equivalent style level, and
//changing the level disconnects it from the style
::Outliner* pOL = pOLV->GetOutliner();
if (pOL)
{
const SvxNumBulletItem *pItem = nullptr;
SfxStyleSheetBasePool* pSSPool = mpView->GetDocSh()->GetStyleSheetPool();
OUString sStyleName(SdResId(STR_PSEUDOSHEET_OUTLINE) + " 1");
SfxStyleSheetBase* pFirstStyleSheet = pSSPool->Find(sStyleName, SfxStyleFamily::Pseudo);
if( pFirstStyleSheet )
pFirstStyleSheet->GetItemSet().GetItemState(EE_PARA_NUMBULLET, false, reinterpret_cast<const SfxPoolItem**>(&pItem));
if (pItem )
{
SvxNumRule aNewRule(*pItem->GetNumRule());
ESelection aSel = pOLV->GetSelection();
aSel.Adjust();
sal_Int32 nStartPara = aSel.nStartPara;
sal_Int32 nEndPara = aSel.nEndPara;
for (sal_Int32 nPara = nStartPara; nPara <= nEndPara; ++nPara)
{
sal_uInt16 nLevel = pOL->GetDepth(nPara);
SvxNumberFormat aFmt(aNewRule.GetLevel(nLevel));
if (aFmt.GetNumberingType() == SVX_NUM_NUMBER_NONE)
{
aFmt.SetNumberingType(SVX_NUM_CHAR_SPECIAL);
SdStyleSheetPool::setDefaultOutlineNumberFormatBulletAndIndent(nLevel, aFmt);
}
else
{
aFmt.SetNumberingType(SVX_NUM_NUMBER_NONE);
aFmt.SetAbsLSpace(0);
aFmt.SetFirstLineOffset(0);
}
aNewRule.SetLevel(nLevel, aFmt);
}
pFirstStyleSheet->GetItemSet().Put(SvxNumBulletItem(aNewRule, EE_PARA_NUMBULLET));
SdStyleSheet::BroadcastSdStyleSheetChange(pFirstStyleSheet, PO_OUTLINE_1, pSSPool);
}
}
}
}
break;
}
case SID_GROW_FONT_SIZE:
case SID_SHRINK_FONT_SIZE:
{
const SvxFontListItem* pFonts = static_cast<const SvxFontListItem*>(mpViewShell->GetDocSh()->GetItem( SID_ATTR_CHAR_FONTLIST ));
const FontList* pFontList = pFonts ? pFonts->GetFontList(): nullptr;
if( pFontList )
{
FuText::ChangeFontSize( nSlot == SID_GROW_FONT_SIZE, pOLV, pFontList, mpView );
if( pOLV )
pOLV->SetAttribs( pOLV->GetEditView().GetEmptyItemSet() );
mpViewShell->GetViewFrame()->GetBindings().Invalidate( SID_ATTR_CHAR_FONTHEIGHT );
}
rReq.Done();
}
break;
case SID_THES:
{
OUString aReplaceText;
const SfxStringItem* pItem2 = rReq.GetArg<SfxStringItem>(SID_THES);
if (pItem2)
aReplaceText = pItem2->GetValue();
if (!aReplaceText.isEmpty())
ReplaceTextWithSynonym( pOLV->GetEditView(), aReplaceText );
}
break;
default:
{
SfxItemSet aEditAttr( mpView->GetDoc().GetPool() );
mpView->GetAttributes( aEditAttr );
SfxItemSet aNewAttr(*(aEditAttr.GetPool()), aEditAttr.GetRanges());
if( !pArgs )
{
//aNewAttr.InvalidateAllItems(); <- produces problems (#35465#)
switch ( nSlot )
{
case SID_ATTR_CHAR_WEIGHT:
{
FontWeight eFW = aEditAttr.Get( EE_CHAR_WEIGHT ).GetWeight();
aNewAttr.Put( SvxWeightItem( eFW == WEIGHT_NORMAL ?
WEIGHT_BOLD : WEIGHT_NORMAL,
EE_CHAR_WEIGHT ) );
}
break;
case SID_ATTR_CHAR_POSTURE:
{
FontItalic eFI = aEditAttr.Get( EE_CHAR_ITALIC ).GetPosture();
aNewAttr.Put( SvxPostureItem( eFI == ITALIC_NORMAL ?
ITALIC_NONE : ITALIC_NORMAL,
EE_CHAR_ITALIC ) );
}
break;
case SID_ATTR_CHAR_UNDERLINE:
{
FontLineStyle eFU = aEditAttr.Get( EE_CHAR_UNDERLINE ).GetLineStyle();
aNewAttr.Put( SvxUnderlineItem( eFU == LINESTYLE_SINGLE ?
LINESTYLE_NONE : LINESTYLE_SINGLE,
EE_CHAR_UNDERLINE ) );
}
break;
case SID_ATTR_CHAR_OVERLINE:
{
FontLineStyle eFO = aEditAttr.Get( EE_CHAR_OVERLINE ).GetLineStyle();
aNewAttr.Put( SvxOverlineItem( eFO == LINESTYLE_SINGLE ?
LINESTYLE_NONE : LINESTYLE_SINGLE,
EE_CHAR_OVERLINE ) );
}
break;
case SID_ATTR_CHAR_CONTOUR:
{
aNewAttr.Put( SvxContourItem( !aEditAttr.Get( EE_CHAR_OUTLINE ).GetValue(), EE_CHAR_OUTLINE ) );
}
break;
case SID_ATTR_CHAR_SHADOWED:
{
aNewAttr.Put( SvxShadowedItem( !aEditAttr.Get( EE_CHAR_SHADOW ).GetValue(), EE_CHAR_SHADOW ) );
}
break;
case SID_ATTR_CHAR_CASEMAP:
{
aNewAttr.Put( SvxCaseMapItem( aEditAttr.Get( EE_CHAR_CASEMAP ) ) );
}
break;
case SID_ATTR_CHAR_STRIKEOUT:
{
FontStrikeout eFSO = aEditAttr.Get( EE_CHAR_STRIKEOUT ).GetStrikeout();
aNewAttr.Put( SvxCrossedOutItem( eFSO == STRIKEOUT_SINGLE ?
STRIKEOUT_NONE : STRIKEOUT_SINGLE, EE_CHAR_STRIKEOUT ) );
}
break;
case SID_ATTR_PARA_ADJUST_LEFT:
{
aNewAttr.Put( SvxAdjustItem( SvxAdjust::Left, EE_PARA_JUST ) );
}
break;
case SID_ATTR_PARA_ADJUST_CENTER:
{
aNewAttr.Put( SvxAdjustItem( SvxAdjust::Center, EE_PARA_JUST ) );
}
break;
case SID_ATTR_PARA_ADJUST_RIGHT:
{
aNewAttr.Put( SvxAdjustItem( SvxAdjust::Right, EE_PARA_JUST ) );
}
break;
case SID_ATTR_PARA_ADJUST_BLOCK:
{
aNewAttr.Put( SvxAdjustItem( SvxAdjust::Block, EE_PARA_JUST ) );
}
break;
case SID_ATTR_PARA_LINESPACE_10:
{
SvxLineSpacingItem aItem( LINE_SPACE_DEFAULT_HEIGHT, EE_PARA_SBL );
aItem.SetPropLineSpace( 100 );
aNewAttr.Put( aItem );
}
break;
case SID_ATTR_PARA_LINESPACE_15:
{
SvxLineSpacingItem aItem( LINE_SPACE_DEFAULT_HEIGHT, EE_PARA_SBL );
aItem.SetPropLineSpace( 150 );
aNewAttr.Put( aItem );
}
break;
case SID_ATTR_PARA_LINESPACE_20:
{
SvxLineSpacingItem aItem( LINE_SPACE_DEFAULT_HEIGHT, EE_PARA_SBL );
aItem.SetPropLineSpace( 200 );
aNewAttr.Put( aItem );
}
break;
case SID_SET_SUPER_SCRIPT:
{
SvxEscapementItem aItem( EE_CHAR_ESCAPEMENT );
SvxEscapement eEsc = static_cast<SvxEscapement>(aEditAttr.Get( EE_CHAR_ESCAPEMENT ).GetEnumValue());
if( eEsc == SvxEscapement::Superscript )
aItem.SetEscapement( SvxEscapement::Off );
else
aItem.SetEscapement( SvxEscapement::Superscript );
aNewAttr.Put( aItem );
}
break;
case SID_SET_SUB_SCRIPT:
{
SvxEscapementItem aItem( EE_CHAR_ESCAPEMENT );
SvxEscapement eEsc = static_cast<SvxEscapement>(aEditAttr.Get( EE_CHAR_ESCAPEMENT ).GetEnumValue());
if( eEsc == SvxEscapement::Subscript )
aItem.SetEscapement( SvxEscapement::Off );
else
aItem.SetEscapement( SvxEscapement::Subscript );
aNewAttr.Put( aItem );
}
break;
// attributes for TextObjectBar
case SID_ATTR_CHAR_FONT:
mpViewShell->GetViewFrame()->GetDispatcher()->
Execute( SID_CHAR_DLG, SfxCallMode::ASYNCHRON );
break;
case SID_ATTR_CHAR_FONTHEIGHT:
mpViewShell->GetViewFrame()->GetDispatcher()->
Execute( SID_CHAR_DLG, SfxCallMode::ASYNCHRON );
break;
case SID_ATTR_CHAR_COLOR:
break;
// #i35937# removed need for FN_NUM_BULLET_ON handling
}
rReq.Done( aNewAttr );
pArgs = rReq.GetArgs();
}
else if ( nSlot == SID_ATTR_PARA_LEFT_TO_RIGHT ||
nSlot == SID_ATTR_PARA_RIGHT_TO_LEFT )
{
bool bLeftToRight = nSlot == SID_ATTR_PARA_LEFT_TO_RIGHT;
SvxAdjust nAdjust = SvxAdjust::Left;
if( SfxItemState::SET == aEditAttr.GetItemState(EE_PARA_JUST, true, &pPoolItem ) )
nAdjust = static_cast<const SvxAdjustItem*>(pPoolItem)->GetAdjust();
if( bLeftToRight )
{
aNewAttr.Put( SvxFrameDirectionItem( SvxFrameDirection::Horizontal_LR_TB, EE_PARA_WRITINGDIR ) );
if( nAdjust == SvxAdjust::Right )
aNewAttr.Put( SvxAdjustItem( SvxAdjust::Left, EE_PARA_JUST ) );
}
else
{
aNewAttr.Put( SvxFrameDirectionItem( SvxFrameDirection::Horizontal_RL_TB, EE_PARA_WRITINGDIR ) );
if( nAdjust == SvxAdjust::Left )
aNewAttr.Put( SvxAdjustItem( SvxAdjust::Right, EE_PARA_JUST ) );
}
rReq.Done( aNewAttr );
pArgs = rReq.GetArgs();
Invalidate( SID_RULER_TEXT_RIGHT_TO_LEFT );
}
else if ( nSlot == SID_ATTR_CHAR_FONT ||
nSlot == SID_ATTR_CHAR_FONTHEIGHT ||
nSlot == SID_ATTR_CHAR_POSTURE ||
nSlot == SID_ATTR_CHAR_WEIGHT )
{
// #i78017 establish the same behaviour as in Writer
SvtScriptType nScriptType = SvtScriptType::LATIN | SvtScriptType::ASIAN | SvtScriptType::COMPLEX;
if (nSlot == SID_ATTR_CHAR_FONT)
nScriptType = mpView->GetScriptType();
SfxItemPool& rPool = mpView->GetDoc().GetPool();
SvxScriptSetItem aSvxScriptSetItem( nSlot, rPool );
aSvxScriptSetItem.PutItemForScriptType( nScriptType, pArgs->Get( rPool.GetWhich( nSlot ) ) );
aNewAttr.Put( aSvxScriptSetItem.GetItemSet() );
rReq.Done( aNewAttr );
pArgs = rReq.GetArgs();
}
else if (nSlot == SID_ATTR_PARA_ADJUST_LEFT ||
nSlot == SID_ATTR_PARA_ADJUST_CENTER ||
nSlot == SID_ATTR_PARA_ADJUST_RIGHT ||
nSlot == SID_ATTR_PARA_ADJUST_BLOCK)
{
switch( nSlot )
{
case SID_ATTR_PARA_ADJUST_LEFT:
{
aNewAttr.Put( SvxAdjustItem( SvxAdjust::Left, EE_PARA_JUST ) );
}
break;
case SID_ATTR_PARA_ADJUST_CENTER:
{
aNewAttr.Put( SvxAdjustItem( SvxAdjust::Center, EE_PARA_JUST ) );
}
break;
case SID_ATTR_PARA_ADJUST_RIGHT:
{
aNewAttr.Put( SvxAdjustItem( SvxAdjust::Right, EE_PARA_JUST ) );
}
break;
case SID_ATTR_PARA_ADJUST_BLOCK:
{
aNewAttr.Put( SvxAdjustItem( SvxAdjust::Block, EE_PARA_JUST ) );
}
break;
}
rReq.Done( aNewAttr );
pArgs = rReq.GetArgs();
}
else if(nSlot == SID_ATTR_CHAR_KERNING)
{
aNewAttr.Put(pArgs->Get(pArgs->GetPool()->GetWhich(nSlot)));
rReq.Done( aNewAttr );
pArgs = rReq.GetArgs();
}
else if(nSlot == SID_SET_SUPER_SCRIPT )
{
SvxEscapementItem aItem(EE_CHAR_ESCAPEMENT);
SvxEscapement eEsc = static_cast<SvxEscapement>(aEditAttr.Get( EE_CHAR_ESCAPEMENT ).GetEnumValue());
if( eEsc == SvxEscapement::Superscript )
aItem.SetEscapement( SvxEscapement::Off );
else
aItem.SetEscapement( SvxEscapement::Superscript );
aNewAttr.Put( aItem );
rReq.Done( aNewAttr );
pArgs = rReq.GetArgs();
}
else if( nSlot == SID_SET_SUB_SCRIPT )
{
SvxEscapementItem aItem(EE_CHAR_ESCAPEMENT);
SvxEscapement eEsc = static_cast<SvxEscapement>(aEditAttr.Get( EE_CHAR_ESCAPEMENT ).GetEnumValue());
if( eEsc == SvxEscapement::Subscript )
aItem.SetEscapement( SvxEscapement::Off );
else
aItem.SetEscapement( SvxEscapement::Subscript );
aNewAttr.Put( aItem );
rReq.Done( aNewAttr );
pArgs = rReq.GetArgs();
}
mpView->SetAttributes(*pArgs);
// invalidate entire shell because of performance and
// extension reasons
Invalidate();
// to refresh preview (in outline mode), slot has to be invalidated:
mpViewShell->GetViewFrame()->GetBindings().Invalidate( SID_PREVIEW_STATE, true );
}
break;
}
Invalidate( SID_OUTLINE_LEFT );
Invalidate( SID_OUTLINE_RIGHT );
Invalidate( SID_OUTLINE_UP );
Invalidate( SID_OUTLINE_DOWN );
}
} // end of namespace sd
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V595 The 'mpViewShell' pointer was utilized before it was verified against nullptr. Check lines: 96, 125.