/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */
 
#include <com/sun/star/table/CellAddress.hpp>
#include <com/sun/star/table/CellRangeAddress.hpp>
#include <cppuhelper/supportsservice.hxx>
 
#include <svl/itemprop.hxx>
#include <vcl/svapp.hxx>
 
#include <docsh.hxx>
#include <unonames.hxx>
#include <miscuno.hxx>
#include <convuno.hxx>
#include <addruno.hxx>
 
using namespace com::sun::star;
 
ScAddressConversionObj::ScAddressConversionObj(ScDocShell* pDocSh, bool _bIsRange) :
    pDocShell( pDocSh ),
    nRefSheet( 0 ),
    bIsRange( _bIsRange )
{
    pDocShell->GetDocument().AddUnoObject(*this);
}
 
ScAddressConversionObj::~ScAddressConversionObj()
{
    SolarMutexGuard g;
 
    if (pDocShell)
        pDocShell->GetDocument().RemoveUnoObject(*this);
}
 
void ScAddressConversionObj::Notify( SfxBroadcaster&, const SfxHint& rHint )
{
    if ( rHint.GetId() == SfxHintId::Dying )
    {
        pDocShell = nullptr;       // invalid
    }
}
 
bool ScAddressConversionObj::ParseUIString( const OUString& rUIString, ::formula::FormulaGrammar::AddressConvention eConv )
{
    if (!pDocShell)
        return false;
 
    ScDocument& rDoc = pDocShell->GetDocument();
    bool bSuccess = false;
    if ( bIsRange )
    {
        ScRefFlags nResult = aRange.ParseAny( rUIString, &rDoc, eConv );
        if ( nResult & ScRefFlags::VALID )
        {
            if ( ( nResult & ScRefFlags::TAB_3D ) == ScRefFlags::ZERO )
                aRange.aStart.SetTab( static_cast<SCTAB>(nRefSheet) );
            if ( ( nResult & ScRefFlags::TAB2_3D ) == ScRefFlags::ZERO )
                aRange.aEnd.SetTab( aRange.aStart.Tab() );
            // different sheets are not supported in CellRangeAddress
            if ( aRange.aStart.Tab() == aRange.aEnd.Tab() )
                bSuccess = true;
        }
    }
    else
    {
        ScRefFlags nResult = aRange.aStart.Parse( rUIString, &rDoc, eConv );
        if ( nResult & ScRefFlags::VALID )
        {
            if ( ( nResult & ScRefFlags::TAB_3D ) == ScRefFlags::ZERO )
                aRange.aStart.SetTab( static_cast<SCTAB>(nRefSheet) );
            bSuccess = true;
        }
    }
    return bSuccess;
}
 
// XPropertySet
 
uno::Reference<beans::XPropertySetInfo> SAL_CALL ScAddressConversionObj::getPropertySetInfo()
{
    SolarMutexGuard aGuard;
 
    if ( bIsRange )
    {
        static const SfxItemPropertyMapEntry aPropertyMap[] =
        {
            { OUString(SC_UNONAME_ADDRESS),  0,  cppu::UnoType<table::CellRangeAddress>::get(), 0, 0 },
            { OUString(SC_UNONAME_PERSREPR), 0,  cppu::UnoType<OUString>::get(),    0, 0 },
            { OUString(SC_UNONAME_XLA1REPR), 0,  cppu::UnoType<OUString>::get(),    0, 0 },
            { OUString(SC_UNONAME_REFSHEET), 0,  cppu::UnoType<sal_Int32>::get(),        0, 0 },
            { OUString(SC_UNONAME_UIREPR),   0,  cppu::UnoType<OUString>::get(),    0, 0 },
            { OUString(SC_UNONAME_XLA1REPR), 0,  cppu::UnoType<OUString>::get(),    0, 0 },
            { OUString(), 0, css::uno::Type(), 0, 0 }
        };
        static uno::Reference<beans::XPropertySetInfo> aRef(new SfxItemPropertySetInfo( aPropertyMap ));
        return aRef;
    }
    else
    {
        static const SfxItemPropertyMapEntry aPropertyMap[] =
        {
            { OUString(SC_UNONAME_ADDRESS),  0,  cppu::UnoType<table::CellAddress>::get(), 0, 0 },
            { OUString(SC_UNONAME_PERSREPR), 0,  cppu::UnoType<OUString>::get(),    0, 0 },
            { OUString(SC_UNONAME_XLA1REPR), 0,  cppu::UnoType<OUString>::get(),    0, 0 },
            { OUString(SC_UNONAME_REFSHEET), 0,  cppu::UnoType<sal_Int32>::get(),        0, 0 },
            { OUString(SC_UNONAME_UIREPR),   0,  cppu::UnoType<OUString>::get(),    0, 0 },
            { OUString(SC_UNONAME_XLA1REPR), 0,  cppu::UnoType<OUString>::get(),    0, 0 },
            { OUString(), 0, css::uno::Type(), 0, 0 }
        };
        static uno::Reference<beans::XPropertySetInfo> aRef(new SfxItemPropertySetInfo( aPropertyMap ));
        return aRef;
    }
}
 
void SAL_CALL ScAddressConversionObj::setPropertyValue( const OUString& aPropertyName, const uno::Any& aValue )
{
    if ( !pDocShell )
        throw uno::RuntimeException();
 
    bool bSuccess = false;
    if ( aPropertyName == SC_UNONAME_ADDRESS )
    {
        //  read the cell/range address from API struct
        if ( bIsRange )
        {
            table::CellRangeAddress aRangeAddress;
            if ( aValue >>= aRangeAddress )
            {
                ScUnoConversion::FillScRange( aRange, aRangeAddress );
                bSuccess = true;
            }
        }
        else
        {
            table::CellAddress aCellAddress;
            if ( aValue >>= aCellAddress )
            {
                ScUnoConversion::FillScAddress( aRange.aStart, aCellAddress );
                bSuccess = true;
            }
        }
    }
    else if ( aPropertyName == SC_UNONAME_REFSHEET )
    {
        //  set the reference sheet
        sal_Int32 nIntVal = 0;
        if ( aValue >>= nIntVal )
        {
            nRefSheet = nIntVal;
            bSuccess = true;
        }
    }
    else if ( aPropertyName == SC_UNONAME_UIREPR )
    {
        //  parse the UI representation string
        OUString sRepresentation;
        if (aValue >>= sRepresentation)
        {
            bSuccess = ParseUIString( sRepresentation );
        }
    }
    else if ( aPropertyName == SC_UNONAME_PERSREPR || aPropertyName == SC_UNONAME_XLA1REPR )
    {
        ::formula::FormulaGrammar::AddressConvention eConv = aPropertyName == SC_UNONAME_XLA1REPR ?
            ::formula::FormulaGrammar::CONV_XL_A1 : ::formula::FormulaGrammar::CONV_OOO;
 
        //  parse the file format string
        OUString sRepresentation;
        if (aValue >>= sRepresentation)
        {
            OUString aUIString(sRepresentation);
 
            //  cell or range: strip a single "." at the start
            if ( aUIString[0]== '.' )
                aUIString = aUIString.copy( 1 );
 
            if ( bIsRange )
            {
                //  range: also strip a "." after the last colon
                sal_Int32 nColon = aUIString.lastIndexOf( ':' );
                if ( nColon >= 0 && nColon < aUIString.getLength() - 1 &&
                     aUIString[nColon+1] == '.' )
                    aUIString = aUIString.replaceAt( nColon+1, 1, "" );
            }
 
            //  parse the rest like a UI string
            bSuccess = ParseUIString( aUIString, eConv );
        }
    }
    else
        throw beans::UnknownPropertyException();
 
    if ( !bSuccess )
        throw lang::IllegalArgumentException();
}
 
uno::Any SAL_CALL ScAddressConversionObj::getPropertyValue( const OUString& aPropertyName )
{
    if ( !pDocShell )
        throw uno::RuntimeException();
 
    ScDocument& rDoc = pDocShell->GetDocument();
    uno::Any aRet;
 
    if ( aPropertyName == SC_UNONAME_ADDRESS )
    {
        if ( bIsRange )
        {
            table::CellRangeAddress aRangeAddress;
            ScUnoConversion::FillApiRange( aRangeAddress, aRange );
            aRet <<= aRangeAddress;
        }
        else
        {
            table::CellAddress aCellAddress;
            ScUnoConversion::FillApiAddress( aCellAddress, aRange.aStart );
            aRet <<= aCellAddress;
        }
    }
    else if ( aPropertyName == SC_UNONAME_REFSHEET )
    {
        aRet <<= nRefSheet;
    }
    else if ( aPropertyName == SC_UNONAME_UIREPR )
    {
        //  generate UI representation string - include sheet only if different from ref sheet
        OUString aFormatStr;
        ScRefFlags nFlags = ScRefFlags::VALID;
        if ( aRange.aStart.Tab() != nRefSheet )
            nFlags |= ScRefFlags::TAB_3D;
        if ( bIsRange )
            aFormatStr = aRange.Format(nFlags, &rDoc);
        else
            aFormatStr = aRange.aStart.Format(nFlags, &rDoc);
        aRet <<= aFormatStr;
    }
    else if ( aPropertyName == SC_UNONAME_PERSREPR || aPropertyName == SC_UNONAME_XLA1REPR )
    {
        ::formula::FormulaGrammar::AddressConvention eConv = aPropertyName == SC_UNONAME_XLA1REPR ?
            ::formula::FormulaGrammar::CONV_XL_A1 : ::formula::FormulaGrammar::CONV_OOO;
 
        //  generate file format string - always include sheet
        OUString aFormatStr(aRange.aStart.Format(ScRefFlags::VALID | ScRefFlags::TAB_3D, &rDoc, eConv));
        if ( bIsRange )
        {
            //  manually concatenate range so both parts always have the sheet name
            aFormatStr += ":";
            ScRefFlags nFlags = ScRefFlags::VALID;
            if( eConv != ::formula::FormulaGrammar::CONV_XL_A1 )
                nFlags |= ScRefFlags::TAB_3D;
            OUString aSecond(aRange.aEnd.Format(nFlags, &rDoc, eConv));
            aFormatStr += aSecond ;
        }
        aRet <<= aFormatStr;
    }
    else
        throw beans::UnknownPropertyException();
 
    return aRet;
}
 
SC_IMPL_DUMMY_PROPERTY_LISTENER( ScAddressConversionObj )
 
// lang::XServiceInfo
 
OUString SAL_CALL ScAddressConversionObj::getImplementationName()
{
    return OUString("ScAddressConversionObj" );
}
 
sal_Bool SAL_CALL ScAddressConversionObj::supportsService( const OUString& rServiceName )
{
    return cppu::supportsService(this, rServiceName);
}
 
uno::Sequence<OUString> SAL_CALL ScAddressConversionObj::getSupportedServiceNames()
{
    if (bIsRange)
        return {SC_SERVICENAME_RANGEADDRESS};
    else
        return {SC_SERVICENAME_CELLADDRESS};
}
 
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */

V524 It is odd that the body of 'removePropertyChangeListener' function is fully equivalent to the body of 'addPropertyChangeListener' function.

V524 It is odd that the body of 'removeVetoableChangeListener' function is fully equivalent to the body of 'addVetoableChangeListener' function.