/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <svl/zforlist.hxx>
#include <dlg_ObjectProperties.hxx>
#include "TabPageIds.h"
#include <strings.hrc>
#include "tp_AxisLabel.hxx"
#include "tp_DataLabel.hxx"
#include "tp_LegendPosition.hxx"
#include "tp_PointGeometry.hxx"
#include "tp_Scale.hxx"
#include "tp_AxisPositions.hxx"
#include "tp_ErrorBars.hxx"
#include "tp_Trendline.hxx"
#include "tp_SeriesToAxis.hxx"
#include "tp_TitleRotation.hxx"
#include "tp_PolarOptions.hxx"
#include <ResId.hxx>
#include <ViewElementListProvider.hxx>
#include <ChartModelHelper.hxx>
#include <ChartTypeHelper.hxx>
#include <ObjectNameProvider.hxx>
#include <DiagramHelper.hxx>
#include <NumberFormatterWrapper.hxx>
#include <AxisIndexDefines.hxx>
#include <AxisHelper.hxx>
#include <ExplicitCategoriesProvider.hxx>
#include <ChartModel.hxx>
#include <CommonConverters.hxx>
#include <RegressionCalculationHelper.hxx>
#include <com/sun/star/chart2/AxisType.hpp>
#include <com/sun/star/chart2/XAxis.hpp>
#include <com/sun/star/chart2/XChartType.hpp>
#include <com/sun/star/chart2/XDataSeries.hpp>
#include <svl/intitem.hxx>
#include <svl/languageoptions.hxx>
#include <svx/svxids.hrc>
#include <svx/drawitem.hxx>
#include <svx/ofaitem.hxx>
#include <svx/svxgrahicitem.hxx>
#include <svx/dialogs.hrc>
#include <editeng/flstitem.hxx>
#include <svx/tabline.hxx>
#include <svx/flagsdef.hxx>
#include <svx/numinf.hxx>
#include <svl/cjkoptions.hxx>
#include <tools/diagnose_ex.h>
namespace chart
{
using namespace ::com::sun::star;
using namespace ::com::sun::star::chart2;
using ::com::sun::star::uno::Reference;
using ::com::sun::star::uno::Sequence;
using ::com::sun::star::uno::Exception;
using ::com::sun::star::beans::XPropertySet;
ObjectPropertiesDialogParameter::ObjectPropertiesDialogParameter( const OUString& rObjectCID )
: m_aObjectCID( rObjectCID )
, m_eObjectType( ObjectIdentifier::getObjectType( m_aObjectCID ) )
, m_bAffectsMultipleObjects(false)
, m_aLocalizedName()
, m_bHasGeometryProperties(false)
, m_bHasStatisticProperties(false)
, m_bProvidesSecondaryYAxis(false)
, m_bProvidesOverlapAndGapWidth(false)
, m_bProvidesBarConnectors(false)
, m_bHasAreaProperties(false)
, m_bHasSymbolProperties(false)
, m_bHasNumberProperties(false)
, m_bProvidesStartingAngle(false)
, m_bProvidesMissingValueTreatments(false)
, m_bHasScaleProperties(false)
, m_bCanAxisLabelsBeStaggered(false)
, m_bSupportingAxisPositioning(false)
, m_bShowAxisOrigin(false)
, m_bIsCrossingAxisIsCategoryAxis(false)
, m_aCategories()
, m_bComplexCategoriesAxis( false )
, m_nNbPoints( 0 )
{
OUString aParticleID = ObjectIdentifier::getParticleID( m_aObjectCID );
m_bAffectsMultipleObjects = (aParticleID == "ALLELEMENTS");
}
ObjectPropertiesDialogParameter::~ObjectPropertiesDialogParameter()
{
}
void ObjectPropertiesDialogParameter::init( const uno::Reference< frame::XModel >& xChartModel )
{
m_xChartDocument.set( xChartModel, uno::UNO_QUERY );
uno::Reference< XDiagram > xDiagram( ChartModelHelper::findDiagram( xChartModel ) );
uno::Reference< XDataSeries > xSeries = ObjectIdentifier::getDataSeriesForCID( m_aObjectCID, xChartModel );
uno::Reference< XChartType > xChartType = ChartModelHelper::getChartTypeOfSeries( xChartModel, xSeries );
sal_Int32 nDimensionCount = DiagramHelper::getDimension( xDiagram );
bool bHasSeriesProperties = (m_eObjectType==OBJECTTYPE_DATA_SERIES);
bool bHasDataPointproperties = (m_eObjectType==OBJECTTYPE_DATA_POINT);
if( bHasSeriesProperties || bHasDataPointproperties )
{
m_bHasGeometryProperties = ChartTypeHelper::isSupportingGeometryProperties( xChartType, nDimensionCount );
m_bHasAreaProperties = ChartTypeHelper::isSupportingAreaProperties( xChartType, nDimensionCount );
m_bHasSymbolProperties = ChartTypeHelper::isSupportingSymbolProperties( xChartType, nDimensionCount );
if( bHasSeriesProperties )
{
m_bHasStatisticProperties = ChartTypeHelper::isSupportingStatisticProperties( xChartType, nDimensionCount );
m_bProvidesSecondaryYAxis = ChartTypeHelper::isSupportingSecondaryAxis( xChartType, nDimensionCount );
m_bProvidesOverlapAndGapWidth = ChartTypeHelper::isSupportingOverlapAndGapWidthProperties( xChartType, nDimensionCount );
m_bProvidesBarConnectors = ChartTypeHelper::isSupportingBarConnectors( xChartType, nDimensionCount );
m_bProvidesStartingAngle = ChartTypeHelper::isSupportingStartingAngle( xChartType );
m_bProvidesMissingValueTreatments = ChartTypeHelper::getSupportedMissingValueTreatments( xChartType )
.getLength();
}
}
if( m_eObjectType == OBJECTTYPE_DATA_ERRORS_X ||
m_eObjectType == OBJECTTYPE_DATA_ERRORS_Y ||
m_eObjectType == OBJECTTYPE_DATA_ERRORS_Z)
m_bHasStatisticProperties = true;
if( m_eObjectType == OBJECTTYPE_AXIS )
{
//show scale properties only for a single axis not for multiselection
m_bHasScaleProperties = !m_bAffectsMultipleObjects;
if( m_bHasScaleProperties )
{
uno::Reference< XAxis > xAxis( ObjectIdentifier::getAxisForCID( m_aObjectCID, xChartModel ) );
if( xAxis.is() )
{
//no scale page for series axis
ScaleData aData( xAxis->getScaleData() );
if( aData.AxisType == chart2::AxisType::SERIES )
m_bHasScaleProperties = false;
if( aData.AxisType != chart2::AxisType::SERIES )
m_bHasNumberProperties = true;
sal_Int32 nCooSysIndex=0;
sal_Int32 nDimensionIndex=0;
sal_Int32 nAxisIndex=0;
if( AxisHelper::getIndicesForAxis( xAxis, xDiagram, nCooSysIndex, nDimensionIndex, nAxisIndex ) )
{
xChartType = AxisHelper::getFirstChartTypeWithSeriesAttachedToAxisIndex( xDiagram, nAxisIndex );
//show positioning controls only if they make sense
m_bSupportingAxisPositioning = ChartTypeHelper::isSupportingAxisPositioning( xChartType, nDimensionCount, nDimensionIndex );
//show axis origin only for secondary y axis
if( nDimensionIndex==1 && nAxisIndex==1 && ChartTypeHelper::isSupportingBaseValue( xChartType ) )
m_bShowAxisOrigin = true;
}
//is the crossing main axis a category axes?:
uno::Reference< XCoordinateSystem > xCooSys( AxisHelper::getCoordinateSystemOfAxis( xAxis, xDiagram ) );
uno::Reference< XAxis > xCrossingMainAxis( AxisHelper::getCrossingMainAxis( xAxis, xCooSys ) );
if( xCrossingMainAxis.is() )
{
ScaleData aScale( xCrossingMainAxis->getScaleData() );
m_bIsCrossingAxisIsCategoryAxis = ( aScale.AxisType == chart2::AxisType::CATEGORY );
if( m_bIsCrossingAxisIsCategoryAxis )
{
ChartModel* pModel = dynamic_cast<ChartModel*>(xChartModel.get());
if (pModel)
m_aCategories = DiagramHelper::getExplicitSimpleCategories( *pModel );
}
}
m_bComplexCategoriesAxis = false;
if ( nDimensionIndex == 0 && aData.AxisType == chart2::AxisType::CATEGORY )
{
ChartModel* pModel = dynamic_cast<ChartModel*>(xChartModel.get());
if (pModel)
{
ExplicitCategoriesProvider aExplicitCategoriesProvider( xCooSys, *pModel );
m_bComplexCategoriesAxis = aExplicitCategoriesProvider.hasComplexCategories();
}
}
}
}
//no staggering of labels for 3D axis
m_bCanAxisLabelsBeStaggered = nDimensionCount==2;
}
if( m_eObjectType == OBJECTTYPE_DATA_CURVE )
{
uno::Reference< data::XDataSource > xSource( xSeries, uno::UNO_QUERY );
Sequence< Reference< data::XLabeledDataSequence > > aDataSeqs( xSource->getDataSequences());
Sequence< double > aXValues, aYValues;
bool bXValuesFound = false, bYValuesFound = false;
m_nNbPoints = 0;
sal_Int32 i = 0;
for( i=0;
! (bXValuesFound && bYValuesFound) && i<aDataSeqs.getLength();
++i )
{
try
{
Reference< data::XDataSequence > xSeq( aDataSeqs[i]->getValues());
Reference< XPropertySet > xProp( xSeq, uno::UNO_QUERY_THROW );
OUString aRole;
if( xProp->getPropertyValue( "Role" ) >>= aRole )
{
if( !bXValuesFound && aRole == "values-x" )
{
aXValues = DataSequenceToDoubleSequence( xSeq );
bXValuesFound = true;
}
else if( !bYValuesFound && aRole == "values-y" )
{
aYValues = DataSequenceToDoubleSequence( xSeq );
bYValuesFound = true;
}
}
}
catch( const Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
}
if( !bXValuesFound && bYValuesFound )
{
// initialize with 1, 2, ...
//first category (index 0) matches with real number 1.0
aXValues.realloc( aYValues.getLength() );
for( i=0; i<aXValues.getLength(); ++i )
aXValues[i] = i+1;
bXValuesFound = true;
}
if( bXValuesFound && bYValuesFound &&
aXValues.getLength() > 0 &&
aYValues.getLength() > 0 )
{
RegressionCalculationHelper::tDoubleVectorPair aValues(
RegressionCalculationHelper::cleanup( aXValues, aYValues, RegressionCalculationHelper::isValid()));
m_nNbPoints = aValues.second.size();
}
}
//create gui name for this object
{
if( !m_bAffectsMultipleObjects && m_eObjectType == OBJECTTYPE_AXIS )
{
m_aLocalizedName = ObjectNameProvider::getAxisName( m_aObjectCID, xChartModel );
}
else if( !m_bAffectsMultipleObjects && ( m_eObjectType == OBJECTTYPE_GRID || m_eObjectType == OBJECTTYPE_SUBGRID ) )
{
m_aLocalizedName = ObjectNameProvider::getGridName( m_aObjectCID, xChartModel );
}
else if( !m_bAffectsMultipleObjects && m_eObjectType == OBJECTTYPE_TITLE )
{
m_aLocalizedName = ObjectNameProvider::getTitleName( m_aObjectCID, xChartModel );
}
else
{
switch( m_eObjectType )
{
case OBJECTTYPE_DATA_POINT:
case OBJECTTYPE_DATA_LABEL:
case OBJECTTYPE_DATA_LABELS:
case OBJECTTYPE_DATA_ERRORS_X:
case OBJECTTYPE_DATA_ERRORS_Y:
case OBJECTTYPE_DATA_ERRORS_Z:
case OBJECTTYPE_DATA_AVERAGE_LINE:
case OBJECTTYPE_DATA_CURVE:
case OBJECTTYPE_DATA_CURVE_EQUATION:
if( m_bAffectsMultipleObjects )
m_aLocalizedName = ObjectNameProvider::getName_ObjectForAllSeries( m_eObjectType );
else
m_aLocalizedName = ObjectNameProvider::getName_ObjectForSeries( m_eObjectType, m_aObjectCID, m_xChartDocument );
break;
default:
m_aLocalizedName = ObjectNameProvider::getName(m_eObjectType,m_bAffectsMultipleObjects);
break;
}
}
}
}
const sal_uInt16 nNoArrowNoShadowDlg = 1101;
void SchAttribTabDlg::setSymbolInformation( std::unique_ptr<SfxItemSet> pSymbolShapeProperties,
std::unique_ptr<Graphic> pAutoSymbolGraphic )
{
m_pSymbolShapeProperties = std::move(pSymbolShapeProperties);
m_pAutoSymbolGraphic = std::move(pAutoSymbolGraphic);
}
void SchAttribTabDlg::SetAxisMinorStepWidthForErrorBarDecimals( double fMinorStepWidth )
{
m_fAxisMinorStepWidthForErrorBarDecimals = fMinorStepWidth;
}
SchAttribTabDlg::SchAttribTabDlg(vcl::Window* pParent,
const SfxItemSet* pAttr,
const ObjectPropertiesDialogParameter* pDialogParameter,
const ViewElementListProvider* pViewElementListProvider,
const uno::Reference< util::XNumberFormatsSupplier >& xNumberFormatsSupplier
)
: SfxTabDialog(pParent, "AttributeDialog", "modules/schart/ui/attributedialog.ui", pAttr)
, nDlgType(nNoArrowNoShadowDlg)
, m_pParameter( pDialogParameter )
, m_pViewElementListProvider( pViewElementListProvider )
, m_pNumberFormatter(nullptr)
, m_fAxisMinorStepWidthForErrorBarDecimals(0.1)
, m_bOKPressed(false)
{
NumberFormatterWrapper aNumberFormatterWrapper( xNumberFormatsSupplier );
m_pNumberFormatter = aNumberFormatterWrapper.getSvNumberFormatter();
SetText( pDialogParameter->getLocalizedName() );
SvtCJKOptions aCJKOptions;
switch (pDialogParameter->getObjectType())
{
case OBJECTTYPE_TITLE:
AddTabPage(RID_SVXPAGE_LINE, SchResId(STR_PAGE_BORDER));
AddTabPage(RID_SVXPAGE_AREA, SchResId(STR_PAGE_AREA));
AddTabPage(RID_SVXPAGE_TRANSPARENCE, SchResId(STR_PAGE_TRANSPARENCY));
AddTabPage(RID_SVXPAGE_CHAR_NAME, SchResId(STR_PAGE_FONT));
AddTabPage(RID_SVXPAGE_CHAR_EFFECTS, SchResId(STR_PAGE_FONT_EFFECTS));
AddTabPage(TP_ALIGNMENT, SchResId(STR_PAGE_ALIGNMENT), SchAlignmentTabPage::Create);
if( aCJKOptions.IsAsianTypographyEnabled() )
AddTabPage(RID_SVXPAGE_PARA_ASIAN, SchResId(STR_PAGE_ASIAN));
break;
case OBJECTTYPE_LEGEND:
AddTabPage(RID_SVXPAGE_LINE, SchResId(STR_PAGE_BORDER));
AddTabPage(RID_SVXPAGE_AREA, SchResId(STR_PAGE_AREA));
AddTabPage(RID_SVXPAGE_TRANSPARENCE, SchResId(STR_PAGE_TRANSPARENCY));
AddTabPage(RID_SVXPAGE_CHAR_NAME, SchResId(STR_PAGE_FONT));
AddTabPage(RID_SVXPAGE_CHAR_EFFECTS, SchResId(STR_PAGE_FONT_EFFECTS));
AddTabPage(TP_LEGEND_POS, SchResId(STR_PAGE_POSITION), SchLegendPosTabPage::Create);
if( aCJKOptions.IsAsianTypographyEnabled() )
AddTabPage(RID_SVXPAGE_PARA_ASIAN, SchResId(STR_PAGE_ASIAN));
break;
case OBJECTTYPE_DATA_SERIES:
case OBJECTTYPE_DATA_POINT:
if( m_pParameter->ProvidesSecondaryYAxis() || m_pParameter->ProvidesOverlapAndGapWidth() || m_pParameter->ProvidesMissingValueTreatments() )
AddTabPage(TP_OPTIONS, SchResId(STR_PAGE_OPTIONS),SchOptionTabPage::Create);
if( m_pParameter->ProvidesStartingAngle())
AddTabPage(TP_POLAROPTIONS, SchResId(STR_PAGE_OPTIONS),PolarOptionsTabPage::Create);
if( m_pParameter->HasGeometryProperties() )
AddTabPage(TP_LAYOUT, SchResId(STR_PAGE_LAYOUT),SchLayoutTabPage::Create);
if(m_pParameter->HasAreaProperties())
{
AddTabPage(RID_SVXPAGE_AREA, SchResId(STR_PAGE_AREA));
AddTabPage(RID_SVXPAGE_TRANSPARENCE, SchResId(STR_PAGE_TRANSPARENCY));
}
AddTabPage(RID_SVXPAGE_LINE, SchResId( m_pParameter->HasAreaProperties() ? STR_PAGE_BORDER : STR_PAGE_LINE ));
break;
case OBJECTTYPE_DATA_LABEL:
case OBJECTTYPE_DATA_LABELS:
AddTabPage(RID_SVXPAGE_LINE, SchResId(STR_PAGE_BORDER));
AddTabPage(TP_DATA_DESCR, SchResId(STR_OBJECT_DATALABELS), DataLabelsTabPage::Create);
AddTabPage(RID_SVXPAGE_CHAR_NAME, SchResId(STR_PAGE_FONT));
AddTabPage(RID_SVXPAGE_CHAR_EFFECTS, SchResId(STR_PAGE_FONT_EFFECTS));
if( aCJKOptions.IsAsianTypographyEnabled() )
AddTabPage(RID_SVXPAGE_PARA_ASIAN, SchResId(STR_PAGE_ASIAN));
break;
case OBJECTTYPE_AXIS:
{
if( m_pParameter->HasScaleProperties() )
AddTabPage(TP_SCALE, SchResId(STR_PAGE_SCALE), ScaleTabPage::Create);
if( m_pParameter->HasScaleProperties() )//no positioning page for z axes so far as the tickmarks are not shown so far
AddTabPage(TP_AXIS_POSITIONS, SchResId(STR_PAGE_POSITIONING), AxisPositionsTabPage::Create);
AddTabPage(RID_SVXPAGE_LINE, SchResId(STR_PAGE_LINE));
AddTabPage(TP_AXIS_LABEL, SchResId(STR_OBJECT_LABEL), SchAxisLabelTabPage::Create);
if( m_pParameter->HasNumberProperties() )
AddTabPage(RID_SVXPAGE_NUMBERFORMAT, SchResId(STR_PAGE_NUMBERS));
AddTabPage(RID_SVXPAGE_CHAR_NAME, SchResId(STR_PAGE_FONT));
AddTabPage(RID_SVXPAGE_CHAR_EFFECTS, SchResId(STR_PAGE_FONT_EFFECTS));
if( aCJKOptions.IsAsianTypographyEnabled() )
AddTabPage(RID_SVXPAGE_PARA_ASIAN, SchResId(STR_PAGE_ASIAN));
break;
}
case OBJECTTYPE_DATA_ERRORS_X:
AddTabPage(TP_XERRORBAR, SchResId(STR_PAGE_XERROR_BARS), ErrorBarsTabPage::Create);
AddTabPage(RID_SVXPAGE_LINE, SchResId(STR_PAGE_LINE));
break;
case OBJECTTYPE_DATA_ERRORS_Y:
AddTabPage(TP_YERRORBAR, SchResId(STR_PAGE_YERROR_BARS), ErrorBarsTabPage::Create);
AddTabPage(RID_SVXPAGE_LINE, SchResId(STR_PAGE_LINE));
break;
case OBJECTTYPE_DATA_ERRORS_Z:
break;
case OBJECTTYPE_GRID:
case OBJECTTYPE_SUBGRID:
case OBJECTTYPE_DATA_AVERAGE_LINE:
case OBJECTTYPE_DATA_STOCK_RANGE:
AddTabPage(RID_SVXPAGE_LINE, SchResId(STR_PAGE_LINE));
break;
case OBJECTTYPE_DATA_CURVE:
AddTabPage(TP_TRENDLINE, SchResId(STR_PAGE_TRENDLINE_TYPE), TrendlineTabPage::Create);
AddTabPage(RID_SVXPAGE_LINE, SchResId(STR_PAGE_LINE));
break;
case OBJECTTYPE_DATA_STOCK_LOSS:
case OBJECTTYPE_DATA_STOCK_GAIN:
case OBJECTTYPE_PAGE:
case OBJECTTYPE_DIAGRAM_FLOOR:
case OBJECTTYPE_DIAGRAM_WALL:
case OBJECTTYPE_DIAGRAM:
AddTabPage(RID_SVXPAGE_LINE, SchResId(STR_PAGE_BORDER));
AddTabPage(RID_SVXPAGE_AREA, SchResId(STR_PAGE_AREA));
AddTabPage(RID_SVXPAGE_TRANSPARENCE, SchResId(STR_PAGE_TRANSPARENCY));
break;
case OBJECTTYPE_LEGEND_ENTRY:
case OBJECTTYPE_AXIS_UNITLABEL:
case OBJECTTYPE_UNKNOWN:
// nothing
break;
case OBJECTTYPE_DATA_CURVE_EQUATION:
AddTabPage(RID_SVXPAGE_LINE, SchResId(STR_PAGE_BORDER));
AddTabPage(RID_SVXPAGE_AREA, SchResId(STR_PAGE_AREA));
AddTabPage(RID_SVXPAGE_TRANSPARENCE, SchResId(STR_PAGE_TRANSPARENCY));
AddTabPage(RID_SVXPAGE_CHAR_NAME, SchResId(STR_PAGE_FONT));
AddTabPage(RID_SVXPAGE_CHAR_EFFECTS, SchResId(STR_PAGE_FONT_EFFECTS));
AddTabPage(RID_SVXPAGE_NUMBERFORMAT, SchResId(STR_PAGE_NUMBERS));
if( SvtLanguageOptions().IsCTLFontEnabled() )
/* When rotation is supported for equation text boxes, use
SchAlignmentTabPage::Create here. The special
SchAlignmentTabPage::CreateWithoutRotation can be deleted. */
AddTabPage(TP_ALIGNMENT, SchResId(STR_PAGE_ALIGNMENT), SchAlignmentTabPage::CreateWithoutRotation);
break;
default:
break;
}
// used to find out if user left the dialog with OK. When OK is pressed but
// no changes were done, Cancel is returned by the SfxTabDialog. See method
// DialogWasClosedWithOK.
m_aOriginalOKClickHdl = GetOKButton().GetClickHdl();
GetOKButton().SetClickHdl( LINK( this, SchAttribTabDlg, OKPressed ));
}
SchAttribTabDlg::~SchAttribTabDlg()
{
disposeOnce();
}
void SchAttribTabDlg::dispose()
{
m_pSymbolShapeProperties.reset();
m_pAutoSymbolGraphic.reset();
SfxTabDialog::dispose();
}
void SchAttribTabDlg::PageCreated(sal_uInt16 nId, SfxTabPage &rPage)
{
SfxAllItemSet aSet(*(GetInputSetImpl()->GetPool()));
switch (nId)
{
case TP_LAYOUT:
break;
case RID_SVXPAGE_LINE:
aSet.Put (SvxColorListItem(m_pViewElementListProvider->GetColorTable(),SID_COLOR_TABLE));
aSet.Put (SvxDashListItem(m_pViewElementListProvider->GetDashList(),SID_DASH_LIST));
aSet.Put (SvxLineEndListItem(m_pViewElementListProvider->GetLineEndList(),SID_LINEEND_LIST));
aSet.Put (SfxUInt16Item(SID_PAGE_TYPE,0));
aSet.Put (SfxUInt16Item(SID_DLG_TYPE,nDlgType));
if( m_pParameter->HasSymbolProperties() )
{
aSet.Put(OfaPtrItem(SID_OBJECT_LIST,m_pViewElementListProvider->GetSymbolList()));
if( m_pSymbolShapeProperties )
aSet.Put(SfxTabDialogItem(SID_ATTR_SET,*m_pSymbolShapeProperties));
if( m_pAutoSymbolGraphic )
aSet.Put(SvxGraphicItem(*m_pAutoSymbolGraphic));
}
rPage.PageCreated(aSet);
break;
case RID_SVXPAGE_AREA:
aSet.Put(SvxColorListItem(m_pViewElementListProvider->GetColorTable(),SID_COLOR_TABLE));
aSet.Put(SvxGradientListItem(m_pViewElementListProvider->GetGradientList(),SID_GRADIENT_LIST));
aSet.Put(SvxHatchListItem(m_pViewElementListProvider->GetHatchList(),SID_HATCH_LIST));
aSet.Put(SvxBitmapListItem(m_pViewElementListProvider->GetBitmapList(),SID_BITMAP_LIST));
aSet.Put(SvxPatternListItem(m_pViewElementListProvider->GetPatternList(),SID_PATTERN_LIST));
aSet.Put(SfxUInt16Item(SID_PAGE_TYPE,0));
aSet.Put(SfxUInt16Item(SID_DLG_TYPE,nDlgType));
rPage.PageCreated(aSet);
break;
case RID_SVXPAGE_TRANSPARENCE:
aSet.Put (SfxUInt16Item(SID_PAGE_TYPE,0));
aSet.Put (SfxUInt16Item(SID_DLG_TYPE,nDlgType));
rPage.PageCreated(aSet);
break;
case RID_SVXPAGE_CHAR_NAME:
aSet.Put (SvxFontListItem(m_pViewElementListProvider->getFontList(), SID_ATTR_CHAR_FONTLIST));
rPage.PageCreated(aSet);
break;
case RID_SVXPAGE_CHAR_EFFECTS:
aSet.Put (SfxUInt16Item(SID_DISABLE_CTL,DISABLE_CASEMAP));
rPage.PageCreated(aSet);
break;
case TP_AXIS_LABEL:
{
bool bShowStaggeringControls = m_pParameter->CanAxisLabelsBeStaggered();
static_cast<SchAxisLabelTabPage&>(rPage).ShowStaggeringControls( bShowStaggeringControls );
dynamic_cast< SchAxisLabelTabPage& >( rPage ).SetComplexCategories( m_pParameter->IsComplexCategoriesAxis() );
break;
}
case TP_ALIGNMENT:
break;
case TP_AXIS_POSITIONS:
{
AxisPositionsTabPage* pPage = dynamic_cast< AxisPositionsTabPage* >( &rPage );
if(pPage)
{
pPage->SetNumFormatter( m_pNumberFormatter );
if( m_pParameter->IsCrossingAxisIsCategoryAxis() )
{
pPage->SetCrossingAxisIsCategoryAxis( m_pParameter->IsCrossingAxisIsCategoryAxis() );
pPage->SetCategories( m_pParameter->GetCategories() );
}
pPage->SupportAxisPositioning( m_pParameter->IsSupportingAxisPositioning() );
}
}
break;
case TP_SCALE:
{
ScaleTabPage* pScaleTabPage = dynamic_cast< ScaleTabPage* >( &rPage );
if(pScaleTabPage)
{
pScaleTabPage->SetNumFormatter( m_pNumberFormatter );
pScaleTabPage->ShowAxisOrigin( m_pParameter->ShowAxisOrigin() );
}
}
break;
case TP_DATA_DESCR:
{
DataLabelsTabPage* pLabelPage = dynamic_cast< DataLabelsTabPage* >( &rPage );
if( pLabelPage )
pLabelPage->SetNumberFormatter( m_pNumberFormatter );
}
break;
case RID_SVXPAGE_NUMBERFORMAT:
aSet.Put (SvxNumberInfoItem( m_pNumberFormatter, static_cast<sal_uInt16>(SID_ATTR_NUMBERFORMAT_INFO)));
rPage.PageCreated(aSet);
break;
case TP_XERRORBAR:
{
ErrorBarsTabPage * pTabPage = dynamic_cast< ErrorBarsTabPage * >( &rPage );
OSL_ASSERT( pTabPage );
if( pTabPage )
{
pTabPage->SetAxisMinorStepWidthForErrorBarDecimals( m_fAxisMinorStepWidthForErrorBarDecimals );
pTabPage->SetErrorBarType( ErrorBarResources::ERROR_BAR_X );
pTabPage->SetChartDocumentForRangeChoosing( m_pParameter->getDocument());
}
break;
}
case TP_YERRORBAR:
{
ErrorBarsTabPage * pTabPage = dynamic_cast< ErrorBarsTabPage * >( &rPage );
OSL_ASSERT( pTabPage );
if( pTabPage )
{
pTabPage->SetAxisMinorStepWidthForErrorBarDecimals( m_fAxisMinorStepWidthForErrorBarDecimals );
pTabPage->SetErrorBarType( ErrorBarResources::ERROR_BAR_Y );
pTabPage->SetChartDocumentForRangeChoosing( m_pParameter->getDocument());
}
break;
}
case TP_OPTIONS:
{
SchOptionTabPage* pTabPage = dynamic_cast< SchOptionTabPage* >( &rPage );
if( pTabPage && m_pParameter )
pTabPage->Init( m_pParameter->ProvidesSecondaryYAxis(), m_pParameter->ProvidesOverlapAndGapWidth(),
m_pParameter->ProvidesBarConnectors() );
break;
}
case TP_TRENDLINE:
{
TrendlineTabPage* pTrendlineTabPage = dynamic_cast< TrendlineTabPage* >( &rPage );
if(pTrendlineTabPage)
{
pTrendlineTabPage->SetNumFormatter( m_pNumberFormatter );
pTrendlineTabPage->SetNbPoints( m_pParameter->getNbPoints() );
}
break;
}
}
}
IMPL_LINK(SchAttribTabDlg, OKPressed, Button*, pButton, void)
{
m_bOKPressed = true;
m_aOriginalOKClickHdl.Call( pButton );
}
} //namespace chart
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V581 The conditional expressions of the 'if' statements situated alongside each other are identical. Check lines: 397, 400.