/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <sal/config.h>
#include <sal/log.hxx>
#include <cassert>
#include <dlged.hxx>
#include <dlgeddef.hxx>
#include <dlgedlist.hxx>
#include <dlgedobj.hxx>
#include <dlgedpage.hxx>
#include <dlgedview.hxx>
#include <localizationmgr.hxx>
#include <strings.hxx>
#include <com/sun/star/beans/NamedValue.hpp>
#include <com/sun/star/form/binding/XBindableValue.hpp>
#include <com/sun/star/form/binding/XValueBinding.hpp>
#include <com/sun/star/form/binding/XListEntrySink.hpp>
#include <com/sun/star/awt/XUnoControlContainer.hpp>
#include <com/sun/star/awt/XVclContainerPeer.hpp>
#include <com/sun/star/container/XContainer.hpp>
#include <com/sun/star/lang/XServiceInfo.hpp>
#include <com/sun/star/lang/WrappedTargetRuntimeException.hpp>
#include <com/sun/star/script/XScriptEventsSupplier.hpp>
#include <com/sun/star/table/CellAddress.hpp>
#include <cppuhelper/exc_hlp.hxx>
#include <o3tl/functional.hxx>
#include <unotools/sharedunocomponent.hxx>
#include <vcl/svapp.hxx>
namespace basctl
{
using namespace ::com::sun::star;
using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::beans;
using namespace ::com::sun::star::container;
using namespace ::com::sun::star::script;
DlgEditor& DlgEdObj::GetDialogEditor ()
{
if (DlgEdForm* pFormThis = dynamic_cast<DlgEdForm*>(this))
return pFormThis->GetDlgEditor();
else
return pDlgEdForm->GetDlgEditor();
}
DlgEdObj::DlgEdObj(SdrModel& rSdrModel)
: SdrUnoObj(rSdrModel, OUString())
,bIsListening(false)
,pDlgEdForm( nullptr )
{
}
DlgEdObj::DlgEdObj(
SdrModel& rSdrModel,
const OUString& rModelName,
const css::uno::Reference< css::lang::XMultiServiceFactory >& rxSFac)
: SdrUnoObj(rSdrModel, rModelName, rxSFac)
,bIsListening(false)
,pDlgEdForm( nullptr )
{
}
DlgEdObj::~DlgEdObj()
{
if ( isListening() )
EndListening(true);
}
namespace
{
/* returns the DlgEdForm which the given DlgEdObj belongs to
(which might in fact be the object itself)
Failure to obtain the form will be reported with an assertion in the non-product
version.
*/
bool lcl_getDlgEdForm( DlgEdObj* _pObject, DlgEdForm*& _out_pDlgEdForm )
{
_out_pDlgEdForm = dynamic_cast< DlgEdForm* >( _pObject );
if ( !_out_pDlgEdForm )
_out_pDlgEdForm = _pObject->GetDlgEdForm();
DBG_ASSERT( _out_pDlgEdForm, "lcl_getDlgEdForm: no form!" );
return ( _out_pDlgEdForm != nullptr );
}
}
uno::Reference< awt::XControl > DlgEdObj::GetControl() const
{
uno::Reference< awt::XControl > xControl;
if (DlgEdForm const* pForm = GetDlgEdForm())
{
DlgEditor const& rEditor = pForm->GetDlgEditor();
xControl = GetUnoControl(rEditor.GetView(), rEditor.GetWindow());
}
return xControl;
}
bool DlgEdObj::TransformSdrToControlCoordinates(
sal_Int32 nXIn, sal_Int32 nYIn, sal_Int32 nWidthIn, sal_Int32 nHeightIn,
sal_Int32& nXOut, sal_Int32& nYOut, sal_Int32& nWidthOut, sal_Int32& nHeightOut )
{
// input position and size
Size aPos( nXIn, nYIn );
Size aSize( nWidthIn, nHeightIn );
// form position
DlgEdForm* pForm = nullptr;
if ( !lcl_getDlgEdForm( this, pForm ) )
return false;
tools::Rectangle aFormRect = pForm->GetSnapRect();
Size aFormPos( aFormRect.Left(), aFormRect.Top() );
// convert 100th_mm to pixel
OutputDevice* pDevice = Application::GetDefaultDevice();
DBG_ASSERT( pDevice, "DlgEdObj::TransformSdrToControlCoordinates: missing default device!" );
if ( !pDevice )
return false;
aPos = pDevice->LogicToPixel( aPos, MapMode( MapUnit::Map100thMM ) );
aSize = pDevice->LogicToPixel( aSize, MapMode( MapUnit::Map100thMM ) );
aFormPos = pDevice->LogicToPixel( aFormPos, MapMode( MapUnit::Map100thMM ) );
// subtract form position
aPos.AdjustWidth( -(aFormPos.Width()) );
aPos.AdjustHeight( -(aFormPos.Height()) );
// take window borders into account
Reference< beans::XPropertySet > xPSetForm( pForm->GetUnoControlModel(), UNO_QUERY );
DBG_ASSERT( xPSetForm.is(), "DlgEdObj::TransformFormToSdrCoordinates: no form property set!" );
if ( !xPSetForm.is() )
return false;
bool bDecoration = true;
xPSetForm->getPropertyValue( DLGED_PROP_DECORATION ) >>= bDecoration;
if( bDecoration )
{
awt::DeviceInfo aDeviceInfo = pForm->getDeviceInfo();
aPos.AdjustWidth( -(aDeviceInfo.LeftInset) );
aPos.AdjustHeight( -(aDeviceInfo.TopInset) );
}
// convert pixel to logic units
aPos = pDevice->PixelToLogic(aPos, MapMode(MapUnit::MapAppFont));
aSize = pDevice->PixelToLogic(aSize, MapMode(MapUnit::MapAppFont));
// set out parameters
nXOut = aPos.Width();
nYOut = aPos.Height();
nWidthOut = aSize.Width();
nHeightOut = aSize.Height();
return true;
}
bool DlgEdObj::TransformSdrToFormCoordinates(
sal_Int32 nXIn, sal_Int32 nYIn, sal_Int32 nWidthIn, sal_Int32 nHeightIn,
sal_Int32& nXOut, sal_Int32& nYOut, sal_Int32& nWidthOut, sal_Int32& nHeightOut )
{
// input position and size
Size aPos( nXIn, nYIn );
Size aSize( nWidthIn, nHeightIn );
// convert 100th_mm to pixel
OutputDevice* pDevice = Application::GetDefaultDevice();
DBG_ASSERT( pDevice, "DlgEdObj::TransformSdrToFormCoordinates: missing default device!" );
if ( !pDevice )
return false;
aPos = pDevice->LogicToPixel( aPos, MapMode( MapUnit::Map100thMM ) );
aSize = pDevice->LogicToPixel( aSize, MapMode( MapUnit::Map100thMM ) );
// take window borders into account
DlgEdForm* pForm = nullptr;
if ( !lcl_getDlgEdForm( this, pForm ) )
return false;
// take window borders into account
Reference< beans::XPropertySet > xPSetForm( pForm->GetUnoControlModel(), UNO_QUERY );
DBG_ASSERT( xPSetForm.is(), "DlgEdObj::TransformFormToSdrCoordinates: no form property set!" );
if ( !xPSetForm.is() )
return false;
bool bDecoration = true;
xPSetForm->getPropertyValue( DLGED_PROP_DECORATION ) >>= bDecoration;
if( bDecoration )
{
awt::DeviceInfo aDeviceInfo = pForm->getDeviceInfo();
aSize.AdjustWidth( -(aDeviceInfo.LeftInset + aDeviceInfo.RightInset) );
aSize.AdjustHeight( -(aDeviceInfo.TopInset + aDeviceInfo.BottomInset) );
}
// convert pixel to logic units
aPos = pDevice->PixelToLogic(aPos, MapMode(MapUnit::MapAppFont));
aSize = pDevice->PixelToLogic(aSize, MapMode(MapUnit::MapAppFont));
// set out parameters
nXOut = aPos.Width();
nYOut = aPos.Height();
nWidthOut = aSize.Width();
nHeightOut = aSize.Height();
return true;
}
bool DlgEdObj::TransformControlToSdrCoordinates(
sal_Int32 nXIn, sal_Int32 nYIn, sal_Int32 nWidthIn, sal_Int32 nHeightIn,
sal_Int32& nXOut, sal_Int32& nYOut, sal_Int32& nWidthOut, sal_Int32& nHeightOut )
{
// input position and size
Size aPos( nXIn, nYIn );
Size aSize( nWidthIn, nHeightIn );
// form position
DlgEdForm* pForm = nullptr;
if ( !lcl_getDlgEdForm( this, pForm ) )
return false;
Reference< beans::XPropertySet > xPSetForm( pForm->GetUnoControlModel(), UNO_QUERY );
DBG_ASSERT( xPSetForm.is(), "DlgEdObj::TransformControlToSdrCoordinates: no form property set!" );
if ( !xPSetForm.is() )
return false;
sal_Int32 nFormX = 0, nFormY = 0, nFormWidth, nFormHeight;
xPSetForm->getPropertyValue( DLGED_PROP_POSITIONX ) >>= nFormX;
xPSetForm->getPropertyValue( DLGED_PROP_POSITIONY ) >>= nFormY;
xPSetForm->getPropertyValue( DLGED_PROP_WIDTH ) >>= nFormWidth;
xPSetForm->getPropertyValue( DLGED_PROP_HEIGHT ) >>= nFormHeight;
Size aFormPos( nFormX, nFormY );
// convert logic units to pixel
OutputDevice* pDevice = Application::GetDefaultDevice();
DBG_ASSERT( pDevice, "DlgEdObj::TransformControlToSdrCoordinates: missing default device!" );
if ( !pDevice )
return false;
aPos = pDevice->LogicToPixel(aPos, MapMode(MapUnit::MapAppFont));
aSize = pDevice->LogicToPixel(aSize, MapMode(MapUnit::MapAppFont));
aFormPos = pDevice->LogicToPixel(aFormPos, MapMode(MapUnit::MapAppFont));
// add form position
aPos.AdjustWidth(aFormPos.Width() );
aPos.AdjustHeight(aFormPos.Height() );
// take window borders into account
bool bDecoration = true;
xPSetForm->getPropertyValue( DLGED_PROP_DECORATION ) >>= bDecoration;
if( bDecoration )
{
awt::DeviceInfo aDeviceInfo = pForm->getDeviceInfo();
aPos.AdjustWidth(aDeviceInfo.LeftInset );
aPos.AdjustHeight(aDeviceInfo.TopInset );
}
// convert pixel to 100th_mm
aPos = pDevice->PixelToLogic( aPos, MapMode( MapUnit::Map100thMM ) );
aSize = pDevice->PixelToLogic( aSize, MapMode( MapUnit::Map100thMM ) );
// set out parameters
nXOut = aPos.Width();
nYOut = aPos.Height();
nWidthOut = aSize.Width();
nHeightOut = aSize.Height();
return true;
}
bool DlgEdObj::TransformFormToSdrCoordinates(
sal_Int32 nXIn, sal_Int32 nYIn, sal_Int32 nWidthIn, sal_Int32 nHeightIn,
sal_Int32& nXOut, sal_Int32& nYOut, sal_Int32& nWidthOut, sal_Int32& nHeightOut )
{
// input position and size
Size aPos( nXIn, nYIn );
Size aSize( nWidthIn, nHeightIn );
// convert logic units to pixel
OutputDevice* pDevice = Application::GetDefaultDevice();
DBG_ASSERT( pDevice, "DlgEdObj::TransformFormToSdrCoordinates: missing default device!" );
if ( !pDevice )
return false;
// take window borders into account
DlgEdForm* pForm = nullptr;
if ( !lcl_getDlgEdForm( this, pForm ) )
return false;
aPos = pDevice->LogicToPixel(aPos, MapMode(MapUnit::MapAppFont));
aSize = pDevice->LogicToPixel(aSize, MapMode(MapUnit::MapAppFont));
// take window borders into account
Reference< beans::XPropertySet > xPSetForm( pForm->GetUnoControlModel(), UNO_QUERY );
DBG_ASSERT( xPSetForm.is(), "DlgEdObj::TransformFormToSdrCoordinates: no form property set!" );
if ( !xPSetForm.is() )
return false;
bool bDecoration = true;
xPSetForm->getPropertyValue( DLGED_PROP_DECORATION ) >>= bDecoration;
if( bDecoration )
{
awt::DeviceInfo aDeviceInfo = pForm->getDeviceInfo();
aSize.AdjustWidth(aDeviceInfo.LeftInset + aDeviceInfo.RightInset );
aSize.AdjustHeight(aDeviceInfo.TopInset + aDeviceInfo.BottomInset );
}
// convert pixel to 100th_mm
aPos = pDevice->PixelToLogic( aPos, MapMode( MapUnit::Map100thMM ) );
aSize = pDevice->PixelToLogic( aSize, MapMode( MapUnit::Map100thMM ) );
// set out parameters
nXOut = aPos.Width();
nYOut = aPos.Height();
nWidthOut = aSize.Width();
nHeightOut = aSize.Height();
return true;
}
void DlgEdObj::SetRectFromProps()
{
// get control position and size from properties
Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), UNO_QUERY );
if ( xPSet.is() )
{
sal_Int32 nXIn = 0, nYIn = 0, nWidthIn = 0, nHeightIn = 0;
xPSet->getPropertyValue( DLGED_PROP_POSITIONX ) >>= nXIn;
xPSet->getPropertyValue( DLGED_PROP_POSITIONY ) >>= nYIn;
xPSet->getPropertyValue( DLGED_PROP_WIDTH ) >>= nWidthIn;
xPSet->getPropertyValue( DLGED_PROP_HEIGHT ) >>= nHeightIn;
// transform coordinates
sal_Int32 nXOut, nYOut, nWidthOut, nHeightOut;
if ( TransformControlToSdrCoordinates( nXIn, nYIn, nWidthIn, nHeightIn, nXOut, nYOut, nWidthOut, nHeightOut ) )
{
// set rectangle position and size
Point aPoint( nXOut, nYOut );
Size aSize( nWidthOut, nHeightOut );
SetSnapRect( tools::Rectangle( aPoint, aSize ) );
}
}
}
void DlgEdObj::SetPropsFromRect()
{
// get control position and size from rectangle
tools::Rectangle aRect_ = GetSnapRect();
sal_Int32 nXIn = aRect_.Left();
sal_Int32 nYIn = aRect_.Top();
sal_Int32 nWidthIn = aRect_.GetWidth();
sal_Int32 nHeightIn = aRect_.GetHeight();
// transform coordinates
sal_Int32 nXOut, nYOut, nWidthOut, nHeightOut;
if ( TransformSdrToControlCoordinates( nXIn, nYIn, nWidthIn, nHeightIn, nXOut, nYOut, nWidthOut, nHeightOut ) )
{
// set properties
Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), UNO_QUERY );
if ( xPSet.is() )
{
xPSet->setPropertyValue( DLGED_PROP_POSITIONX, Any(nXOut) );
xPSet->setPropertyValue( DLGED_PROP_POSITIONY, Any(nYOut) );
xPSet->setPropertyValue( DLGED_PROP_WIDTH, Any(nWidthOut) );
xPSet->setPropertyValue( DLGED_PROP_HEIGHT, Any(nHeightOut) );
}
}
}
void DlgEdObj::PositionAndSizeChange( const beans::PropertyChangeEvent& evt )
{
DBG_ASSERT( pDlgEdForm, "DlgEdObj::PositionAndSizeChange: no form!" );
DlgEdPage& rPage = pDlgEdForm->GetDlgEditor().GetPage();
{
Size aPageSize = rPage.GetSize();
sal_Int32 nPageWidthIn = aPageSize.Width();
sal_Int32 nPageHeightIn = aPageSize.Height();
sal_Int32 nPageX, nPageY, nPageWidth, nPageHeight;
if ( TransformSdrToControlCoordinates( 0/*nPageXIn*/, 0/*nPageYIn*/, nPageWidthIn, nPageHeightIn, nPageX, nPageY, nPageWidth, nPageHeight ) )
{
Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), UNO_QUERY );
if ( xPSet.is() )
{
sal_Int32 nX = 0, nY = 0, nWidth = 0, nHeight = 0;
xPSet->getPropertyValue( DLGED_PROP_POSITIONX ) >>= nX;
xPSet->getPropertyValue( DLGED_PROP_POSITIONY ) >>= nY;
xPSet->getPropertyValue( DLGED_PROP_WIDTH ) >>= nWidth;
xPSet->getPropertyValue( DLGED_PROP_HEIGHT ) >>= nHeight;
sal_Int32 nValue = 0;
evt.NewValue >>= nValue;
sal_Int32 nNewValue = nValue;
if ( evt.PropertyName == DLGED_PROP_POSITIONX )
{
if ( nNewValue + nWidth > nPageX + nPageWidth )
nNewValue = nPageX + nPageWidth - nWidth;
if ( nNewValue < nPageX )
nNewValue = nPageX;
}
else if ( evt.PropertyName == DLGED_PROP_POSITIONY )
{
if ( nNewValue + nHeight > nPageY + nPageHeight )
nNewValue = nPageY + nPageHeight - nHeight;
if ( nNewValue < nPageY )
nNewValue = nPageY;
}
else if ( evt.PropertyName == DLGED_PROP_WIDTH )
{
if ( nX + nNewValue > nPageX + nPageWidth )
nNewValue = nPageX + nPageWidth - nX;
if ( nNewValue < 1 )
nNewValue = 1;
}
else if ( evt.PropertyName == DLGED_PROP_HEIGHT )
{
if ( nY + nNewValue > nPageY + nPageHeight )
nNewValue = nPageY + nPageHeight - nY;
if ( nNewValue < 1 )
nNewValue = 1;
}
if ( nNewValue != nValue )
{
EndListening( false );
xPSet->setPropertyValue( evt.PropertyName, Any(nNewValue) );
StartListening();
}
}
}
}
SetRectFromProps();
}
void DlgEdObj::NameChange( const css::beans::PropertyChangeEvent& evt )
{
// get old name
OUString aOldName;
evt.OldValue >>= aOldName;
// get new name
OUString aNewName;
evt.NewValue >>= aNewName;
if ( aNewName != aOldName )
{
Reference< container::XNameAccess > xNameAcc((GetDlgEdForm()->GetUnoControlModel()), UNO_QUERY);
if ( xNameAcc.is() && xNameAcc->hasByName(aOldName) )
{
if (!xNameAcc->hasByName(aNewName) && !aNewName.isEmpty())
{
// remove the control by the old name and insert the control by the new name in the container
Reference< container::XNameContainer > xCont(xNameAcc, UNO_QUERY );
if ( xCont.is() )
{
Reference< awt::XControlModel > xCtrl(GetUnoControlModel(), UNO_QUERY);
Any aAny;
aAny <<= xCtrl;
xCont->removeByName( aOldName );
xCont->insertByName( aNewName , aAny );
LocalizationMgr::renameControlResourceIDsForEditorObject(
&GetDialogEditor(), aAny, aNewName
);
}
}
else
{
// set old name property
EndListening(false);
Reference< beans::XPropertySet > xPSet(GetUnoControlModel(), UNO_QUERY);
xPSet->setPropertyValue( DLGED_PROP_NAME, Any(aOldName) );
StartListening();
}
}
}
}
sal_Int32 DlgEdObj::GetStep() const
{
// get step property
sal_Int32 nStep = 0;
uno::Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), uno::UNO_QUERY );
if (xPSet.is())
{
xPSet->getPropertyValue( DLGED_PROP_STEP ) >>= nStep;
}
return nStep;
}
void DlgEdObj::UpdateStep()
{
sal_Int32 nCurStep = GetDlgEdForm()->GetStep();
sal_Int32 nStep = GetStep();
SdrLayerAdmin& rLayerAdmin(getSdrModelFromSdrObject().GetLayerAdmin());
SdrLayerID nHiddenLayerId = rLayerAdmin.GetLayerID( "HiddenLayer" );
SdrLayerID nControlLayerId = rLayerAdmin.GetLayerID( rLayerAdmin.GetControlLayerName() );
if( nCurStep )
{
if ( nStep && (nStep != nCurStep) )
{
SetLayer( nHiddenLayerId );
}
else
{
SetLayer( nControlLayerId );
}
}
else
{
SetLayer( nControlLayerId );
}
}
void DlgEdObj::TabIndexChange( const beans::PropertyChangeEvent& evt )
{
DlgEdForm* pForm = GetDlgEdForm();
if ( pForm )
{
// stop listening with all children
std::vector<DlgEdObj*> aChildList = pForm->GetChildren();
for (auto const& child : aChildList)
{
child->EndListening( false );
}
Reference< container::XNameAccess > xNameAcc( pForm->GetUnoControlModel() , UNO_QUERY );
if ( xNameAcc.is() )
{
// get sequence of control names
Sequence< OUString > aNames = xNameAcc->getElementNames();
const OUString* pNames = aNames.getConstArray();
sal_Int32 nCtrls = aNames.getLength();
// create a map of tab indices and control names, sorted by tab index
IndexToNameMap aIndexToNameMap;
for ( sal_Int32 i = 0; i < nCtrls; ++i )
{
// get control name
OUString aName( pNames[i] );
// get tab index
sal_Int16 nTabIndex = -1;
Any aCtrl = xNameAcc->getByName( aName );
Reference< beans::XPropertySet > xPSet;
aCtrl >>= xPSet;
if ( xPSet.is() && xPSet == Reference< beans::XPropertySet >( evt.Source, UNO_QUERY ) )
evt.OldValue >>= nTabIndex;
else if ( xPSet.is() )
xPSet->getPropertyValue( DLGED_PROP_TABINDEX ) >>= nTabIndex;
// insert into map
aIndexToNameMap.emplace( nTabIndex, aName );
}
// create a helper list of control names, sorted by tab index
std::vector< OUString > aNameList( aIndexToNameMap.size() );
std::transform(
aIndexToNameMap.begin(), aIndexToNameMap.end(),
aNameList.begin(),
::o3tl::select2nd< IndexToNameMap::value_type >( )
);
// check tab index
sal_Int16 nOldTabIndex = 0;
evt.OldValue >>= nOldTabIndex;
sal_Int16 nNewTabIndex = 0;
evt.NewValue >>= nNewTabIndex;
if ( nNewTabIndex < 0 )
nNewTabIndex = 0;
else if ( nNewTabIndex > nCtrls - 1 )
nNewTabIndex = sal::static_int_cast<sal_Int16>( nCtrls - 1 );
// reorder helper list
OUString aCtrlName = aNameList[nOldTabIndex];
aNameList.erase( aNameList.begin() + nOldTabIndex );
aNameList.insert( aNameList.begin() + nNewTabIndex , aCtrlName );
// set new tab indices
for ( sal_Int32 i = 0; i < nCtrls; ++i )
{
Any aCtrl = xNameAcc->getByName( aNameList[i] );
Reference< beans::XPropertySet > xPSet;
aCtrl >>= xPSet;
if ( xPSet.is() )
{
assert(i >= SAL_MIN_INT16);
if (i > SAL_MAX_INT16)
{
SAL_WARN("basctl", "tab " << i << " > SAL_MAX_INT16");
continue;
}
xPSet->setPropertyValue( DLGED_PROP_TABINDEX, Any(static_cast<sal_Int16>(i)) );
}
}
// reorder objects in drawing page
getSdrModelFromSdrObject().GetPage(0)->SetObjectOrdNum( nOldTabIndex + 1, nNewTabIndex + 1 );
pForm->UpdateTabOrderAndGroups();
}
// start listening with all children
for (auto const& child : aChildList)
{
child->StartListening();
}
}
}
bool DlgEdObj::supportsService( OUString const & serviceName ) const
{
bool bSupports = false;
Reference< lang::XServiceInfo > xServiceInfo( GetUnoControlModel() , UNO_QUERY );
// TODO: cache xServiceInfo as member?
if ( xServiceInfo.is() )
bSupports = xServiceInfo->supportsService( serviceName );
return bSupports;
}
OUString DlgEdObj::GetDefaultName() const
{
OUString sResId;
OUString aDefaultName;
if ( supportsService( "com.sun.star.awt.UnoControlDialogModel" ) )
{
sResId = RID_STR_CLASS_DIALOG;
}
else if ( supportsService( "com.sun.star.awt.UnoControlButtonModel" ) )
{
sResId = RID_STR_CLASS_BUTTON;
}
else if ( supportsService( "com.sun.star.awt.UnoControlRadioButtonModel" ) )
{
sResId = RID_STR_CLASS_RADIOBUTTON;
}
else if ( supportsService( "com.sun.star.awt.UnoControlCheckBoxModel" ) )
{
sResId = RID_STR_CLASS_CHECKBOX;
}
else if ( supportsService( "com.sun.star.awt.UnoControlListBoxModel" ) )
{
sResId = RID_STR_CLASS_LISTBOX;
}
else if ( supportsService( "com.sun.star.awt.UnoControlComboBoxModel" ) )
{
sResId = RID_STR_CLASS_COMBOBOX;
}
else if ( supportsService( "com.sun.star.awt.UnoControlGroupBoxModel" ) )
{
sResId = RID_STR_CLASS_GROUPBOX;
}
else if ( supportsService( "com.sun.star.awt.UnoControlEditModel" ) )
{
sResId = RID_STR_CLASS_EDIT;
}
else if ( supportsService( "com.sun.star.awt.UnoControlFixedTextModel" ) )
{
sResId = RID_STR_CLASS_FIXEDTEXT;
}
else if ( supportsService( "com.sun.star.awt.UnoControlImageControlModel" ) )
{
sResId = RID_STR_CLASS_IMAGECONTROL;
}
else if ( supportsService( "com.sun.star.awt.UnoControlProgressBarModel" ) )
{
sResId = RID_STR_CLASS_PROGRESSBAR;
}
else if ( supportsService( "com.sun.star.awt.UnoControlScrollBarModel" ) )
{
sResId = RID_STR_CLASS_SCROLLBAR;
}
else if ( supportsService( "com.sun.star.awt.UnoControlFixedLineModel" ) )
{
sResId = RID_STR_CLASS_FIXEDLINE;
}
else if ( supportsService( "com.sun.star.awt.UnoControlDateFieldModel" ) )
{
sResId = RID_STR_CLASS_DATEFIELD;
}
else if ( supportsService( "com.sun.star.awt.UnoControlTimeFieldModel" ) )
{
sResId = RID_STR_CLASS_TIMEFIELD;
}
else if ( supportsService( "com.sun.star.awt.UnoControlNumericFieldModel" ) )
{
sResId = RID_STR_CLASS_NUMERICFIELD;
}
else if ( supportsService( "com.sun.star.awt.UnoControlCurrencyFieldModel" ) )
{
sResId = RID_STR_CLASS_CURRENCYFIELD;
}
else if ( supportsService( "com.sun.star.awt.UnoControlFormattedFieldModel" ) )
{
sResId = RID_STR_CLASS_FORMATTEDFIELD;
}
else if ( supportsService( "com.sun.star.awt.UnoControlPatternFieldModel" ) )
{
sResId = RID_STR_CLASS_PATTERNFIELD;
}
else if ( supportsService( "com.sun.star.awt.UnoControlFileControlModel" ) )
{
sResId = RID_STR_CLASS_FILECONTROL;
}
else if ( supportsService( "com.sun.star.awt.tree.TreeControlModel" ) )
{
sResId = RID_STR_CLASS_TREECONTROL;
}
else if ( supportsService( "com.sun.star.awt.UnoControlSpinButtonModel" ) )
{
sResId = RID_STR_CLASS_SPINCONTROL;
}
else
{
sResId = RID_STR_CLASS_CONTROL;
}
if (!sResId.isEmpty())
aDefaultName = sResId;
return aDefaultName;
}
OUString DlgEdObj::GetUniqueName() const
{
OUString aUniqueName;
uno::Reference< container::XNameAccess > xNameAcc((GetDlgEdForm()->GetUnoControlModel()), uno::UNO_QUERY);
if ( xNameAcc.is() )
{
sal_Int32 n = 0;
OUString aDefaultName = GetDefaultName();
do
{
aUniqueName = aDefaultName + OUString::number(++n);
} while (xNameAcc->hasByName(aUniqueName));
}
return aUniqueName;
}
SdrInventor DlgEdObj::GetObjInventor() const
{
return SdrInventor::BasicDialog;
}
sal_uInt16 DlgEdObj::GetObjIdentifier() const
{
if ( supportsService( "com.sun.star.awt.UnoControlDialogModel" ))
{
return OBJ_DLG_DIALOG;
}
else if ( supportsService( "com.sun.star.awt.UnoControlButtonModel" ))
{
return OBJ_DLG_PUSHBUTTON;
}
else if ( supportsService( "com.sun.star.awt.UnoControlRadioButtonModel" ))
{
return OBJ_DLG_RADIOBUTTON;
}
else if ( supportsService( "com.sun.star.awt.UnoControlCheckBoxModel" ))
{
return OBJ_DLG_CHECKBOX;
}
else if ( supportsService( "com.sun.star.awt.UnoControlListBoxModel" ))
{
return OBJ_DLG_LISTBOX;
}
else if ( supportsService( "com.sun.star.awt.UnoControlComboBoxModel" ))
{
return OBJ_DLG_COMBOBOX;
}
else if ( supportsService( "com.sun.star.awt.UnoControlGroupBoxModel" ))
{
return OBJ_DLG_GROUPBOX;
}
else if ( supportsService( "com.sun.star.awt.UnoControlEditModel" ))
{
return OBJ_DLG_EDIT;
}
else if ( supportsService( "com.sun.star.awt.UnoControlFixedTextModel" ))
{
return OBJ_DLG_FIXEDTEXT;
}
else if ( supportsService( "com.sun.star.awt.UnoControlImageControlModel" ))
{
return OBJ_DLG_IMAGECONTROL;
}
else if ( supportsService( "com.sun.star.awt.UnoControlProgressBarModel" ))
{
return OBJ_DLG_PROGRESSBAR;
}
else if ( supportsService( "com.sun.star.awt.UnoControlScrollBarModel" ))
{
return OBJ_DLG_HSCROLLBAR;
}
else if ( supportsService( "com.sun.star.awt.UnoControlFixedLineModel" ))
{
return OBJ_DLG_HFIXEDLINE;
}
else if ( supportsService( "com.sun.star.awt.UnoControlDateFieldModel" ))
{
return OBJ_DLG_DATEFIELD;
}
else if ( supportsService( "com.sun.star.awt.UnoControlTimeFieldModel" ))
{
return OBJ_DLG_TIMEFIELD;
}
else if ( supportsService( "com.sun.star.awt.UnoControlNumericFieldModel" ))
{
return OBJ_DLG_NUMERICFIELD;
}
else if ( supportsService( "com.sun.star.awt.UnoControlCurrencyFieldModel" ))
{
return OBJ_DLG_CURRENCYFIELD;
}
else if ( supportsService( "com.sun.star.awt.UnoControlFormattedFieldModel" ))
{
return OBJ_DLG_FORMATTEDFIELD;
}
else if ( supportsService( "com.sun.star.awt.UnoControlPatternFieldModel" ))
{
return OBJ_DLG_PATTERNFIELD;
}
else if ( supportsService( "com.sun.star.awt.UnoControlFileControlModel" ))
{
return OBJ_DLG_FILECONTROL;
}
else if ( supportsService( "com.sun.star.awt.tree.TreeControlModel" ))
{
return OBJ_DLG_TREECONTROL;
}
else
{
return OBJ_DLG_CONTROL;
}
}
void DlgEdObj::clonedFrom(const DlgEdObj* _pSource)
{
// set parent form
pDlgEdForm = _pSource->pDlgEdForm;
// add child to parent form
pDlgEdForm->AddChild( this );
Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), UNO_QUERY );
if ( xPSet.is() )
{
// set new name
OUString aOUniqueName( GetUniqueName() );
Any aUniqueName;
aUniqueName <<= aOUniqueName;
xPSet->setPropertyValue( DLGED_PROP_NAME, aUniqueName );
Reference< container::XNameContainer > xCont( GetDlgEdForm()->GetUnoControlModel() , UNO_QUERY );
if ( xCont.is() )
{
// set tabindex
Sequence< OUString > aNames = xCont->getElementNames();
xPSet->setPropertyValue( DLGED_PROP_TABINDEX, Any(static_cast<sal_Int16>(aNames.getLength())) );
// insert control model in dialog model
Reference< awt::XControlModel > xCtrl( xPSet , UNO_QUERY );
xCont->insertByName( aOUniqueName, Any(xCtrl) );
pDlgEdForm->UpdateTabOrderAndGroups();
}
}
// start listening
StartListening();
}
DlgEdObj* DlgEdObj::CloneSdrObject(SdrModel& rTargetModel) const
{
DlgEdObj* pDlgEdObj = CloneHelper< DlgEdObj >(rTargetModel);
DBG_ASSERT( pDlgEdObj != nullptr, "DlgEdObj::Clone: invalid clone!" );
if ( pDlgEdObj )
pDlgEdObj->clonedFrom( this );
return pDlgEdObj;
}
SdrObject* DlgEdObj::getFullDragClone() const
{
// no need to really add the clone for dragging, it's a temporary
// object
SdrObject* pObj = new SdrUnoObj(
getSdrModelFromSdrObject(),
OUString());
*pObj = *static_cast<const SdrUnoObj*>(this);
return pObj;
}
void DlgEdObj::NbcMove( const Size& rSize )
{
SdrUnoObj::NbcMove( rSize );
// stop listening
EndListening(false);
// set geometry properties
SetPropsFromRect();
// start listening
StartListening();
// dialog model changed
GetDlgEdForm()->GetDlgEditor().SetDialogModelChanged();
}
void DlgEdObj::NbcResize(const Point& rRef, const Fraction& xFract, const Fraction& yFract)
{
SdrUnoObj::NbcResize( rRef, xFract, yFract );
// stop listening
EndListening(false);
// set geometry properties
SetPropsFromRect();
// start listening
StartListening();
// dialog model changed
GetDlgEdForm()->GetDlgEditor().SetDialogModelChanged();
}
bool DlgEdObj::EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd)
{
bool bResult = SdrUnoObj::EndCreate(rStat, eCmd);
SetDefaults();
StartListening();
return bResult;
}
void DlgEdObj::SetDefaults()
{
// set parent form
pDlgEdForm = static_cast<DlgEdPage*>(getSdrPageFromSdrObject())->GetDlgEdForm();
if ( pDlgEdForm )
{
// add child to parent form
pDlgEdForm->AddChild( this );
Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), UNO_QUERY );
if ( xPSet.is() )
{
// get unique name
OUString aOUniqueName( GetUniqueName() );
// set name property
xPSet->setPropertyValue( DLGED_PROP_NAME, Any(aOUniqueName) );
// set labels
if ( supportsService( "com.sun.star.awt.UnoControlButtonModel" ) ||
supportsService( "com.sun.star.awt.UnoControlRadioButtonModel" ) ||
supportsService( "com.sun.star.awt.UnoControlCheckBoxModel" ) ||
supportsService( "com.sun.star.awt.UnoControlGroupBoxModel" ) ||
supportsService( "com.sun.star.awt.UnoControlFixedTextModel" ) )
{
xPSet->setPropertyValue( DLGED_PROP_LABEL, Any(aOUniqueName) );
}
// set number formats supplier for formatted field
if ( supportsService( "com.sun.star.awt.UnoControlFormattedFieldModel" ) )
{
Reference< util::XNumberFormatsSupplier > xSupplier = GetDlgEdForm()->GetDlgEditor().GetNumberFormatsSupplier();
if ( xSupplier.is() )
{
xPSet->setPropertyValue( DLGED_PROP_FORMATSSUPPLIER, Any(xSupplier) );
}
}
// set geometry properties
SetPropsFromRect();
Reference< container::XNameContainer > xCont( GetDlgEdForm()->GetUnoControlModel() , UNO_QUERY );
if ( xCont.is() )
{
// set tabindex
Sequence< OUString > aNames = xCont->getElementNames();
uno::Any aTabIndex;
aTabIndex <<= static_cast<sal_Int16>(aNames.getLength());
xPSet->setPropertyValue( DLGED_PROP_TABINDEX, aTabIndex );
// set step
Reference< beans::XPropertySet > xPSetForm( xCont, UNO_QUERY );
if ( xPSetForm.is() )
{
Any aStep = xPSetForm->getPropertyValue( DLGED_PROP_STEP );
xPSet->setPropertyValue( DLGED_PROP_STEP, aStep );
}
// insert control model in dialog model
Reference< awt::XControlModel > xCtrl( xPSet , UNO_QUERY );
Any aAny;
aAny <<= xCtrl;
xCont->insertByName( aOUniqueName , aAny );
LocalizationMgr::setControlResourceIDsForNewEditorObject(
&GetDialogEditor(), aAny, aOUniqueName
);
pDlgEdForm->UpdateTabOrderAndGroups();
}
}
// dialog model changed
pDlgEdForm->GetDlgEditor().SetDialogModelChanged();
}
}
void DlgEdObj::StartListening()
{
DBG_ASSERT(!isListening(), "DlgEdObj::StartListening: already listening!");
if (!isListening())
{
bIsListening = true;
// XPropertyChangeListener
Reference< XPropertySet > xControlModel( GetUnoControlModel() , UNO_QUERY );
if (!m_xPropertyChangeListener.is() && xControlModel.is())
{
// create listener
m_xPropertyChangeListener = new DlgEdPropListenerImpl(*this);
// register listener to properties
xControlModel->addPropertyChangeListener( OUString() , m_xPropertyChangeListener );
}
// XContainerListener
Reference< XScriptEventsSupplier > xEventsSupplier( GetUnoControlModel() , UNO_QUERY );
if( !m_xContainerListener.is() && xEventsSupplier.is() )
{
// create listener
m_xContainerListener = new DlgEdEvtContListenerImpl(*this);
// register listener to script event container
Reference< XNameContainer > xEventCont = xEventsSupplier->getEvents();
DBG_ASSERT(xEventCont.is(), "DlgEdObj::StartListening: control model has no script event container!");
Reference< XContainer > xCont( xEventCont , UNO_QUERY );
if (xCont.is())
xCont->addContainerListener( m_xContainerListener );
}
}
}
void DlgEdObj::EndListening(bool bRemoveListener)
{
DBG_ASSERT(isListening(), "DlgEdObj::EndListening: not listening currently!");
if (isListening())
{
bIsListening = false;
if (bRemoveListener)
{
// XPropertyChangeListener
Reference< XPropertySet > xControlModel(GetUnoControlModel(), UNO_QUERY);
if ( m_xPropertyChangeListener.is() && xControlModel.is() )
{
// remove listener
xControlModel->removePropertyChangeListener( OUString() , m_xPropertyChangeListener );
}
m_xPropertyChangeListener.clear();
// XContainerListener
Reference< XScriptEventsSupplier > xEventsSupplier( GetUnoControlModel() , UNO_QUERY );
if( m_xContainerListener.is() && xEventsSupplier.is() )
{
// remove listener
Reference< XNameContainer > xEventCont = xEventsSupplier->getEvents();
DBG_ASSERT(xEventCont.is(), "DlgEdObj::EndListening: control model has no script event container!");
Reference< XContainer > xCont( xEventCont , UNO_QUERY );
if (xCont.is())
xCont->removeContainerListener( m_xContainerListener );
}
m_xContainerListener.clear();
}
}
}
void DlgEdObj::_propertyChange( const css::beans::PropertyChangeEvent& evt )
{
if (isListening())
{
DlgEdForm* pRealDlgEdForm = dynamic_cast<DlgEdForm*>(this);
if (!pRealDlgEdForm)
pRealDlgEdForm = GetDlgEdForm();
if (!pRealDlgEdForm)
return;
DlgEditor& rDlgEditor = pRealDlgEdForm->GetDlgEditor();
if (rDlgEditor.isInPaint())
return;
// dialog model changed
rDlgEditor.SetDialogModelChanged();
// update position and size
if ( evt.PropertyName == DLGED_PROP_POSITIONX || evt.PropertyName == DLGED_PROP_POSITIONY ||
evt.PropertyName == DLGED_PROP_WIDTH || evt.PropertyName == DLGED_PROP_HEIGHT ||
evt.PropertyName == DLGED_PROP_DECORATION )
{
PositionAndSizeChange( evt );
if ( evt.PropertyName == DLGED_PROP_DECORATION )
GetDialogEditor().ResetDialog();
}
// change name of control in dialog model
else if ( evt.PropertyName == DLGED_PROP_NAME )
{
if (!dynamic_cast<DlgEdForm*>(this))
{
try
{
NameChange(evt);
}
catch (container::NoSuchElementException const&)
{
css::uno::Any anyEx = cppu::getCaughtException();
throw lang::WrappedTargetRuntimeException("", nullptr,
anyEx);
}
}
}
// update step
else if ( evt.PropertyName == DLGED_PROP_STEP )
{
UpdateStep();
}
// change tabindex
else if ( evt.PropertyName == DLGED_PROP_TABINDEX )
{
if (!dynamic_cast<DlgEdForm*>(this))
TabIndexChange(evt);
}
}
}
void DlgEdObj::_elementInserted()
{
if (isListening())
{
// dialog model changed
GetDialogEditor().SetDialogModelChanged();
}
}
void DlgEdObj::_elementReplaced()
{
if (isListening())
{
// dialog model changed
GetDialogEditor().SetDialogModelChanged();
}
}
void DlgEdObj::_elementRemoved()
{
if (isListening())
{
// dialog model changed
GetDialogEditor().SetDialogModelChanged();
}
}
void DlgEdObj::SetLayer(SdrLayerID nLayer)
{
SdrLayerID nOldLayer = GetLayer();
if ( nLayer != nOldLayer )
{
SdrUnoObj::SetLayer( nLayer );
DlgEdHint aHint( DlgEdHint::LAYERCHANGED, this );
GetDlgEdForm()->GetDlgEditor().Broadcast( aHint );
}
}
DlgEdForm::DlgEdForm(
SdrModel& rSdrModel,
DlgEditor& rDlgEditor_)
: DlgEdObj(rSdrModel),
rDlgEditor(rDlgEditor_)
{
}
DlgEdForm::~DlgEdForm()
{
}
void DlgEdForm::SetRectFromProps()
{
// get form position and size from properties
Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), UNO_QUERY );
if ( xPSet.is() )
{
sal_Int32 nXIn = 0, nYIn = 0, nWidthIn = 0, nHeightIn = 0;
xPSet->getPropertyValue( DLGED_PROP_POSITIONX ) >>= nXIn;
xPSet->getPropertyValue( DLGED_PROP_POSITIONY ) >>= nYIn;
xPSet->getPropertyValue( DLGED_PROP_WIDTH ) >>= nWidthIn;
xPSet->getPropertyValue( DLGED_PROP_HEIGHT ) >>= nHeightIn;
// transform coordinates
sal_Int32 nXOut, nYOut, nWidthOut, nHeightOut;
if ( TransformFormToSdrCoordinates( nXIn, nYIn, nWidthIn, nHeightIn, nXOut, nYOut, nWidthOut, nHeightOut ) )
{
// set rectangle position and size
Point aPoint( nXOut, nYOut );
Size aSize( nWidthOut, nHeightOut );
SetSnapRect( tools::Rectangle( aPoint, aSize ) );
}
}
}
void DlgEdForm::SetPropsFromRect()
{
// get form position and size from rectangle
tools::Rectangle aRect_ = GetSnapRect();
sal_Int32 nXIn = aRect_.Left();
sal_Int32 nYIn = aRect_.Top();
sal_Int32 nWidthIn = aRect_.GetWidth();
sal_Int32 nHeightIn = aRect_.GetHeight();
// transform coordinates
sal_Int32 nXOut, nYOut, nWidthOut, nHeightOut;
if ( TransformSdrToFormCoordinates( nXIn, nYIn, nWidthIn, nHeightIn, nXOut, nYOut, nWidthOut, nHeightOut ) )
{
// set properties
Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), UNO_QUERY );
if ( xPSet.is() )
{
xPSet->setPropertyValue( DLGED_PROP_POSITIONX, Any(nXOut) );
xPSet->setPropertyValue( DLGED_PROP_POSITIONY, Any(nYOut) );
xPSet->setPropertyValue( DLGED_PROP_WIDTH, Any(nWidthOut) );
xPSet->setPropertyValue( DLGED_PROP_HEIGHT, Any(nHeightOut) );
}
}
}
void DlgEdForm::AddChild( DlgEdObj* pDlgEdObj )
{
pChildren.push_back( pDlgEdObj );
}
void DlgEdForm::RemoveChild( DlgEdObj* pDlgEdObj )
{
pChildren.erase( std::remove( pChildren.begin() , pChildren.end() , pDlgEdObj ) );
}
void DlgEdForm::PositionAndSizeChange( const beans::PropertyChangeEvent& evt )
{
DlgEditor& rEditor = GetDlgEditor();
DlgEdPage& rPage = rEditor.GetPage();
sal_Int32 nPageXIn = 0;
sal_Int32 nPageYIn = 0;
Size aPageSize = rPage.GetSize();
sal_Int32 nPageWidthIn = aPageSize.Width();
sal_Int32 nPageHeightIn = aPageSize.Height();
sal_Int32 nPageX, nPageY, nPageWidth, nPageHeight;
if ( TransformSdrToFormCoordinates( nPageXIn, nPageYIn, nPageWidthIn, nPageHeightIn, nPageX, nPageY, nPageWidth, nPageHeight ) )
{
Reference< beans::XPropertySet > xPSetForm( GetUnoControlModel(), UNO_QUERY );
if ( xPSetForm.is() )
{
sal_Int32 nValue = 0;
evt.NewValue >>= nValue;
sal_Int32 nNewValue = nValue;
if ( evt.PropertyName == DLGED_PROP_POSITIONX )
{
if ( nNewValue < nPageX )
nNewValue = nPageX;
}
else if ( evt.PropertyName == DLGED_PROP_POSITIONY )
{
if ( nNewValue < nPageY )
nNewValue = nPageY;
}
else if ( evt.PropertyName == DLGED_PROP_WIDTH )
{
if ( nNewValue < 1 )
nNewValue = 1;
}
else if ( evt.PropertyName == DLGED_PROP_HEIGHT )
{
if ( nNewValue < 1 )
nNewValue = 1;
}
if ( nNewValue != nValue )
{
EndListening( false );
xPSetForm->setPropertyValue( evt.PropertyName, Any(nNewValue) );
StartListening();
}
}
}
bool bAdjustedPageSize = rEditor.AdjustPageSize();
SetRectFromProps();
std::vector<DlgEdObj*> const& aChildList = GetChildren();
if ( bAdjustedPageSize )
{
rEditor.InitScrollBars();
aPageSize = rPage.GetSize();
nPageWidthIn = aPageSize.Width();
nPageHeightIn = aPageSize.Height();
if ( TransformSdrToControlCoordinates( nPageXIn, nPageYIn, nPageWidthIn, nPageHeightIn, nPageX, nPageY, nPageWidth, nPageHeight ) )
{
for (auto const& child : aChildList)
{
Reference< beans::XPropertySet > xPSet( child->GetUnoControlModel(), UNO_QUERY );
if ( xPSet.is() )
{
sal_Int32 nX = 0, nY = 0, nWidth = 0, nHeight = 0;
xPSet->getPropertyValue( DLGED_PROP_POSITIONX ) >>= nX;
xPSet->getPropertyValue( DLGED_PROP_POSITIONY ) >>= nY;
xPSet->getPropertyValue( DLGED_PROP_WIDTH ) >>= nWidth;
xPSet->getPropertyValue( DLGED_PROP_HEIGHT ) >>= nHeight;
sal_Int32 nNewX = nX;
if ( nX + nWidth > nPageX + nPageWidth )
{
nNewX = nPageX + nPageWidth - nWidth;
if ( nNewX < nPageX )
nNewX = nPageX;
}
if ( nNewX != nX )
{
EndListening( false );
xPSet->setPropertyValue( DLGED_PROP_POSITIONX, Any(nNewX) );
StartListening();
}
sal_Int32 nNewY = nY;
if ( nY + nHeight > nPageY + nPageHeight )
{
nNewY = nPageY + nPageHeight - nHeight;
if ( nNewY < nPageY )
nNewY = nPageY;
}
if ( nNewY != nY )
{
EndListening( false );
xPSet->setPropertyValue( DLGED_PROP_POSITIONY, Any(nNewY) );
StartListening();
}
}
}
}
}
for (auto const& child : aChildList)
child->SetRectFromProps();
}
void DlgEdForm::UpdateStep()
{
SdrPage* pSdrPage = getSdrPageFromSdrObject();
if ( pSdrPage )
{
const size_t nObjCount = pSdrPage->GetObjCount();
for ( size_t i = 0 ; i < nObjCount ; i++ )
{
DlgEdObj* pDlgEdObj = dynamic_cast<DlgEdObj*>(pSdrPage->GetObj(i));
if (pDlgEdObj && !dynamic_cast<DlgEdForm*>(pDlgEdObj))
pDlgEdObj->UpdateStep();
}
}
}
void DlgEdForm::UpdateTabIndices()
{
// stop listening with all children
for (auto const& child : pChildren)
{
child->EndListening( false );
}
Reference< css::container::XNameAccess > xNameAcc( GetUnoControlModel() , UNO_QUERY );
if ( xNameAcc.is() )
{
// get sequence of control names
Sequence< OUString > aNames = xNameAcc->getElementNames();
const OUString* pNames = aNames.getConstArray();
sal_Int32 nCtrls = aNames.getLength();
// create a map of tab indices and control names, sorted by tab index
IndexToNameMap aIndexToNameMap;
for ( sal_Int32 i = 0; i < nCtrls; ++i )
{
// get name
OUString aName( pNames[i] );
// get tab index
sal_Int16 nTabIndex = -1;
Any aCtrl = xNameAcc->getByName( aName );
Reference< css::beans::XPropertySet > xPSet;
aCtrl >>= xPSet;
if ( xPSet.is() )
xPSet->getPropertyValue( DLGED_PROP_TABINDEX ) >>= nTabIndex;
// insert into map
aIndexToNameMap.emplace( nTabIndex, aName );
}
// set new tab indices
sal_Int16 nNewTabIndex = 0;
for (auto const& indexToName : aIndexToNameMap)
{
Any aCtrl = xNameAcc->getByName( indexToName.second );
Reference< beans::XPropertySet > xPSet;
aCtrl >>= xPSet;
if ( xPSet.is() )
{
xPSet->setPropertyValue( DLGED_PROP_TABINDEX, Any(nNewTabIndex) );
nNewTabIndex++;
}
}
UpdateTabOrderAndGroups();
}
// start listening with all children
for (auto const& child : pChildren)
{
child->StartListening();
}
}
void DlgEdForm::UpdateTabOrder()
{
// When the tabindex of a control model changes, the dialog control is
// notified about those changes. Due to #109067# (bad performance of
// dialog editor) the dialog control doesn't activate the tab order
// in design mode. When the dialog editor has reordered all
// tabindices, this method allows to activate the taborder afterwards.
Reference< awt::XUnoControlContainer > xCont( GetControl(), UNO_QUERY );
if ( xCont.is() )
{
Sequence< Reference< awt::XTabController > > aSeqTabCtrls = xCont->getTabControllers();
const Reference< awt::XTabController >* pTabCtrls = aSeqTabCtrls.getConstArray();
sal_Int32 nCount = aSeqTabCtrls.getLength();
for ( sal_Int32 i = 0; i < nCount; ++i )
pTabCtrls[i]->activateTabOrder();
}
}
void DlgEdForm::UpdateGroups()
{
// The grouping of radio buttons in a dialog is done by vcl.
// In the dialog editor we have two views (=controls) for one
// radio button model. One control is owned by the dialog control,
// but not visible in design mode. The other control is owned by
// the drawing layer object. Whereas the grouping of the first
// control is done by vcl, the grouping of the control in the
// drawing layer has to be done here.
Reference< awt::XTabControllerModel > xTabModel( GetUnoControlModel() , UNO_QUERY );
if ( xTabModel.is() )
{
// create a global list of controls that belong to the dialog
std::vector<DlgEdObj*> aChildList = GetChildren();
sal_uInt32 nSize = aChildList.size();
Sequence< Reference< awt::XControl > > aSeqControls( nSize );
for ( sal_uInt32 i = 0; i < nSize; ++i )
aSeqControls.getArray()[i].set( aChildList[i]->GetControl(), UNO_QUERY );
sal_Int32 nGroupCount = xTabModel->getGroupCount();
for ( sal_Int32 nGroup = 0; nGroup < nGroupCount; ++nGroup )
{
// get a list of control models that belong to this group
OUString aName;
Sequence< Reference< awt::XControlModel > > aSeqModels;
xTabModel->getGroup( nGroup, aSeqModels, aName );
const Reference< awt::XControlModel >* pModels = aSeqModels.getConstArray();
sal_Int32 nModelCount = aSeqModels.getLength();
// create a list of peers that belong to this group
Sequence< Reference< awt::XWindow > > aSeqPeers( nModelCount );
for ( sal_Int32 nModel = 0; nModel < nModelCount; ++nModel )
{
// for each control model find the corresponding control in the global list
const Reference< awt::XControl >* pControls = aSeqControls.getConstArray();
sal_Int32 nControlCount = aSeqControls.getLength();
for ( sal_Int32 nControl = 0; nControl < nControlCount; ++nControl )
{
const Reference< awt::XControl > xCtrl( pControls[nControl] );
if ( xCtrl.is() )
{
Reference< awt::XControlModel > xCtrlModel( xCtrl->getModel() );
if ( xCtrlModel.get() == pModels[nModel].get() )
{
// get the control peer and insert into the list of peers
aSeqPeers.getArray()[ nModel ].set( xCtrl->getPeer(), UNO_QUERY );
break;
}
}
}
}
// set the group at the dialog peer
Reference< awt::XControl > xDlg( GetControl(), UNO_QUERY );
if ( xDlg.is() )
{
Reference< awt::XVclContainerPeer > xDlgPeer( xDlg->getPeer(), UNO_QUERY );
if ( xDlgPeer.is() )
xDlgPeer->setGroup( aSeqPeers );
}
}
}
}
void DlgEdForm::UpdateTabOrderAndGroups()
{
UpdateTabOrder();
UpdateGroups();
}
void DlgEdForm::NbcMove( const Size& rSize )
{
SdrUnoObj::NbcMove( rSize );
// set geometry properties of form
EndListening(false);
SetPropsFromRect();
StartListening();
// set geometry properties of all children
for (auto const& child : pChildren)
{
child->EndListening(false);
child->SetPropsFromRect();
child->StartListening();
}
// dialog model changed
GetDlgEditor().SetDialogModelChanged();
}
void DlgEdForm::NbcResize(const Point& rRef, const Fraction& xFract, const Fraction& yFract)
{
SdrUnoObj::NbcResize( rRef, xFract, yFract );
// set geometry properties of form
EndListening(false);
SetPropsFromRect();
StartListening();
// set geometry properties of all children
for (auto const& child : pChildren)
{
child->EndListening(false);
child->SetPropsFromRect();
child->StartListening();
}
// dialog model changed
GetDlgEditor().SetDialogModelChanged();
}
bool DlgEdForm::EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd)
{
bool bResult = SdrUnoObj::EndCreate(rStat, eCmd);
// stop listening
EndListening(false);
// set geometry properties
SetPropsFromRect();
// dialog model changed
GetDlgEditor().SetDialogModelChanged();
// start listening
StartListening();
return bResult;
}
awt::DeviceInfo DlgEdForm::getDeviceInfo() const
{
awt::DeviceInfo aDeviceInfo;
DlgEditor& rEditor = GetDlgEditor();
vcl::Window& rWindow = rEditor.GetWindow();
// obtain an XControl
::utl::SharedUNOComponent< awt::XControl > xDialogControl; // ensures auto-disposal, if needed
xDialogControl.reset( GetControl(), ::utl::SharedUNOComponent< awt::XControl >::NoTakeOwnership );
if ( !xDialogControl.is() )
{
// don't create a temporary control all the time, this method here is called
// way too often. Instead, use a cached DeviceInfo.
// #i74065#
if ( !!mpDeviceInfo )
return *mpDeviceInfo;
Reference< awt::XControlContainer > xEditorControlContainer( rEditor.GetWindowControlContainer() );
xDialogControl.reset(
GetTemporaryControlForWindow(rWindow, xEditorControlContainer),
utl::SharedUNOComponent< awt::XControl >::TakeOwnership
);
}
Reference< awt::XDevice > xDialogDevice;
if ( xDialogControl.is() )
xDialogDevice.set( xDialogControl->getPeer(), UNO_QUERY );
DBG_ASSERT( xDialogDevice.is(), "DlgEdForm::getDeviceInfo: no device!" );
if ( xDialogDevice.is() )
aDeviceInfo = xDialogDevice->getInfo();
mpDeviceInfo.reset( aDeviceInfo );
return aDeviceInfo;
}
void DlgEdObj::MakeDataAware( const Reference< frame::XModel >& xModel )
{
// Need to flesh this out, currently we will only support data-aware controls for calc
// and only handle a subset of functionality e.g. linked-cell and cell range data source. Of course later
// we need to disambiguate for writer ( and others ? ) and also support the generic form (db) bindings
// we need some more work in xmlscript to be able to handle that
Reference< lang::XMultiServiceFactory > xFac( xModel, UNO_QUERY );
Reference< form::binding::XBindableValue > xBindable( GetUnoControlModel(), UNO_QUERY );
Reference< form::binding::XListEntrySink > xListEntrySink( GetUnoControlModel(), UNO_QUERY );
if ( xFac.is() )
{
css::table::CellAddress aApiAddress;
//tdf#90361 CellValueBinding and CellRangeListSource are unusable
//without being initialized, so use createInstanceWithArguments with a
//dummy BoundCell instead of createInstance. This at least results in
//the dialog editor not falling.
css::beans::NamedValue aValue;
aValue.Name = "BoundCell";
aValue.Value <<= aApiAddress;
Sequence< Any > aArgs( 1 );
aArgs[ 0 ] <<= aValue;
if ( xBindable.is() )
{
Reference< form::binding::XValueBinding > xBinding( xFac->createInstanceWithArguments( "com.sun.star.table.CellValueBinding", aArgs ), UNO_QUERY );
xBindable->setValueBinding( xBinding );
}
if ( xListEntrySink.is() )
{
Reference< form::binding::XListEntrySource > xSource( xFac->createInstanceWithArguments( "com.sun.star.table.CellRangeListSource", aArgs ), UNO_QUERY );
xListEntrySink->setListEntrySource( xSource );
}
}
}
} // namespace basctl
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V547 Expression 'nNewValue < 1' is always true.
↑ V547 Expression 'nNewTabIndex < 0' is always false.
↑ V547 Expression 'nNewValue < 1' is always true.
↑ V547 Expression 'bDecoration' is always true.
↑ V547 Expression 'bDecoration' is always true.
↑ V547 Expression 'bDecoration' is always true.
↑ V547 Expression 'bDecoration' is always true.
↑ V547 Expression 'nNewValue < 1' is always true.
↑ V547 Expression 'nNewValue < 1' is always true.