/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <ChartController.hxx>
#include <PositionAndSizeHelper.hxx>
#include <ObjectIdentifier.hxx>
#include <ChartWindow.hxx>
#include <ResId.hxx>
#include <CommonConverters.hxx>
#include <ChartModel.hxx>
#include <ChartModelHelper.hxx>
#include <DiagramHelper.hxx>
#include <TitleHelper.hxx>
#include "UndoGuard.hxx"
#include <ControllerLockGuard.hxx>
#include <ObjectNameProvider.hxx>
#include <strings.hrc>
#include "DragMethod_PieSegment.hxx"
#include "DragMethod_RotateDiagram.hxx"
#include <ObjectHierarchy.hxx>
#include <chartview/ExplicitValueProvider.hxx>
#include <RelativePositionHelper.hxx>
#include <chartview/DrawModelWrapper.hxx>
#include <RegressionCurveHelper.hxx>
#include <StatisticsHelper.hxx>
#include <DataSeriesHelper.hxx>
#include <ContainerHelper.hxx>
#include <AxisHelper.hxx>
#include <LegendHelper.hxx>
#include <servicenames_charttypes.hxx>
#include "DrawCommandDispatch.hxx"
#include <PopupRequest.hxx>
#include <com/sun/star/chart2/RelativePosition.hpp>
#include <com/sun/star/chart2/RelativeSize.hpp>
#include <com/sun/star/chart2/XRegressionCurveContainer.hpp>
#include <com/sun/star/chart2/data/XPivotTableDataProvider.hpp>
#include <com/sun/star/chart2/XChartDocument.hpp>
#include <com/sun/star/awt/PopupMenuDirection.hpp>
#include <com/sun/star/frame/DispatchHelper.hpp>
#include <com/sun/star/frame/FrameSearchFlag.hpp>
#include <com/sun/star/frame/XPopupMenuController.hpp>
#include <com/sun/star/util/XUpdatable.hpp>
#include <com/sun/star/awt/Rectangle.hpp>
#include <com/sun/star/qa/XDumper.hpp>
#include <comphelper/lok.hxx>
#include <comphelper/propertysequence.hxx>
#include <comphelper/propertyvalue.hxx>
#include <toolkit/awt/vclxmenu.hxx>
#include <sfx2/viewsh.hxx>
#include <sfx2/ipclient.hxx>
#include <svx/svxids.hrc>
#include <svx/ActionDescriptionProvider.hxx>
#include <svx/obj3d.hxx>
#include <svx/scene3d.hxx>
#include <svx/svddrgmt.hxx>
#include <vcl/svapp.hxx>
#include <vcl/settings.hxx>
#include <vcl/weld.hxx>
#include <rtl/math.hxx>
#include <svtools/acceleratorexecute.hxx>
#include <tools/diagnose_ex.h>
#include <sal/log.hxx>
#define DRGPIX 2 // Drag MinMove in Pixel
using namespace ::com::sun::star;
using namespace ::com::sun::star::chart2;
using ::com::sun::star::uno::Reference;
namespace chart
{
namespace
{
bool lcl_GrowAndShiftLogic(
RelativePosition & rInOutRelPos,
RelativeSize & rInOutRelSize,
const awt::Size & rRefSize,
double fGrowLogicX,
double fGrowLogicY )
{
if( rRefSize.Width == 0 ||
rRefSize.Height == 0 )
return false;
double fRelativeGrowX = fGrowLogicX / rRefSize.Width;
double fRelativeGrowY = fGrowLogicY / rRefSize.Height;
return ::chart::RelativePositionHelper::centerGrow(
rInOutRelPos, rInOutRelSize,
fRelativeGrowX, fRelativeGrowY );
}
bool lcl_MoveObjectLogic(
RelativePosition & rInOutRelPos,
RelativeSize const & rObjectSize,
const awt::Size & rRefSize,
double fShiftLogicX,
double fShiftLogicY )
{
if( rRefSize.Width == 0 ||
rRefSize.Height == 0 )
return false;
double fRelativeShiftX = fShiftLogicX / rRefSize.Width;
double fRelativeShiftY = fShiftLogicY / rRefSize.Height;
return ::chart::RelativePositionHelper::moveObject(
rInOutRelPos, rObjectSize,
fRelativeShiftX, fRelativeShiftY );
}
void lcl_insertMenuCommand(
const uno::Reference< awt::XPopupMenu > & xMenu,
sal_Int16 nId, const OUString & rCommand )
{
xMenu->insertItem( nId, "", 0, -1 );
xMenu->setCommand( nId, rCommand );
}
OUString lcl_getFormatCommandForObjectCID( const OUString& rCID )
{
OUString aDispatchCommand( ".uno:FormatSelection" );
ObjectType eObjectType = ObjectIdentifier::getObjectType( rCID );
switch(eObjectType)
{
case OBJECTTYPE_DIAGRAM:
case OBJECTTYPE_DIAGRAM_WALL:
aDispatchCommand = ".uno:FormatWall";
break;
case OBJECTTYPE_DIAGRAM_FLOOR:
aDispatchCommand = ".uno:FormatFloor";
break;
case OBJECTTYPE_PAGE:
aDispatchCommand = ".uno:FormatChartArea";
break;
case OBJECTTYPE_LEGEND:
aDispatchCommand = ".uno:FormatLegend";
break;
case OBJECTTYPE_TITLE:
aDispatchCommand = ".uno:FormatTitle";
break;
case OBJECTTYPE_LEGEND_ENTRY:
aDispatchCommand = ".uno:FormatDataSeries";
break;
case OBJECTTYPE_AXIS:
case OBJECTTYPE_AXIS_UNITLABEL:
aDispatchCommand = ".uno:FormatAxis";
break;
case OBJECTTYPE_GRID:
aDispatchCommand = ".uno:FormatMajorGrid";
break;
case OBJECTTYPE_SUBGRID:
aDispatchCommand = ".uno:FormatMinorGrid";
break;
case OBJECTTYPE_DATA_LABELS:
aDispatchCommand = ".uno:FormatDataLabels";
break;
case OBJECTTYPE_DATA_SERIES:
aDispatchCommand = ".uno:FormatDataSeries";
break;
case OBJECTTYPE_DATA_LABEL:
aDispatchCommand = ".uno:FormatDataLabel";
break;
case OBJECTTYPE_DATA_POINT:
aDispatchCommand = ".uno:FormatDataPoint";
break;
case OBJECTTYPE_DATA_AVERAGE_LINE:
aDispatchCommand = ".uno:FormatMeanValue";
break;
case OBJECTTYPE_DATA_ERRORS_X:
aDispatchCommand = ".uno:FormatXErrorBars";
break;
case OBJECTTYPE_DATA_ERRORS_Y:
aDispatchCommand = ".uno:FormatYErrorBars";
break;
case OBJECTTYPE_DATA_ERRORS_Z:
aDispatchCommand = ".uno:FormatZErrorBars";
break;
case OBJECTTYPE_DATA_CURVE:
aDispatchCommand = ".uno:FormatTrendline";
break;
case OBJECTTYPE_DATA_CURVE_EQUATION:
aDispatchCommand = ".uno:FormatTrendlineEquation";
break;
case OBJECTTYPE_DATA_STOCK_RANGE:
aDispatchCommand = ".uno:FormatSelection";
break;
case OBJECTTYPE_DATA_STOCK_LOSS:
aDispatchCommand = ".uno:FormatStockLoss";
break;
case OBJECTTYPE_DATA_STOCK_GAIN:
aDispatchCommand = ".uno:FormatStockGain";
break;
default: //OBJECTTYPE_UNKNOWN
break;
}
return aDispatchCommand;
}
} // anonymous namespace
// awt::XWindow
void SAL_CALL ChartController::setPosSize(
sal_Int32 X,
sal_Int32 Y,
sal_Int32 Width,
sal_Int32 Height,
sal_Int16 Flags )
{
SolarMutexGuard aGuard;
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
auto pChartWindow(GetChartWindow());
if(xWindow.is() && pChartWindow)
{
Size aLogicSize = pChartWindow->PixelToLogic( Size( Width, Height ), MapMode( MapUnit::Map100thMM ) );
//todo: for standalone chart: detect whether we are standalone
//change map mode to fit new size
awt::Size aModelPageSize = ChartModelHelper::getPageSize( getModel() );
sal_Int32 nScaleXNumerator = aLogicSize.Width();
sal_Int32 nScaleXDenominator = aModelPageSize.Width;
sal_Int32 nScaleYNumerator = aLogicSize.Height();
sal_Int32 nScaleYDenominator = aModelPageSize.Height;
MapMode aNewMapMode(
MapUnit::Map100thMM,
Point(0,0),
Fraction(nScaleXNumerator, nScaleXDenominator),
Fraction(nScaleYNumerator, nScaleYDenominator) );
pChartWindow->SetMapMode(aNewMapMode);
pChartWindow->setPosSizePixel( X, Y, Width, Height, static_cast<PosSizeFlags>(Flags) );
//#i75867# poor quality of ole's alternative view with 3D scenes and zoomfactors besides 100%
uno::Reference< beans::XPropertySet > xProp( m_xChartView, uno::UNO_QUERY );
if( xProp.is() )
{
auto aZoomFactors(::comphelper::InitPropertySequence({
{ "ScaleXNumerator", uno::Any( nScaleXNumerator ) },
{ "ScaleXDenominator", uno::Any( nScaleXDenominator ) },
{ "ScaleYNumerator", uno::Any( nScaleYNumerator ) },
{ "ScaleYDenominator", uno::Any( nScaleYDenominator ) }
}));
xProp->setPropertyValue( "ZoomFactors", uno::Any( aZoomFactors ));
}
//a correct work area is at least necessary for correct values in the position and size dialog and for dragging area
if(m_pDrawViewWrapper)
{
tools::Rectangle aRect(Point(0,0), pChartWindow->GetOutputSize());
m_pDrawViewWrapper->SetWorkArea( aRect );
}
pChartWindow->Invalidate();
}
}
awt::Rectangle SAL_CALL ChartController::getPosSize()
{
//@todo
awt::Rectangle aRet(0, 0, 0, 0);
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
aRet = xWindow->getPosSize();
return aRet;
}
void SAL_CALL ChartController::setVisible( sal_Bool Visible )
{
//@todo
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
xWindow->setVisible( Visible );
}
void SAL_CALL ChartController::setEnable( sal_Bool Enable )
{
//@todo
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
xWindow->setEnable( Enable );
}
void SAL_CALL ChartController::setFocus()
{
//@todo
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
xWindow->setFocus();
}
void SAL_CALL ChartController::addWindowListener(
const uno::Reference< awt::XWindowListener >& xListener )
{
//@todo
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
xWindow->addWindowListener( xListener );
}
void SAL_CALL ChartController::removeWindowListener(
const uno::Reference< awt::XWindowListener >& xListener )
{
//@todo
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
xWindow->removeWindowListener( xListener );
}
void SAL_CALL ChartController::addFocusListener(
const uno::Reference< awt::XFocusListener >& xListener )
{
//@todo
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
xWindow->addFocusListener( xListener );
}
void SAL_CALL ChartController::removeFocusListener(
const uno::Reference< awt::XFocusListener >& xListener )
{
//@todo
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
xWindow->removeFocusListener( xListener );
}
void SAL_CALL ChartController::addKeyListener(
const uno::Reference< awt::XKeyListener >& xListener )
{
//@todo
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
xWindow->addKeyListener( xListener );
}
void SAL_CALL ChartController::removeKeyListener(
const uno::Reference< awt::XKeyListener >& xListener )
{
//@todo
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
xWindow->removeKeyListener( xListener );
}
void SAL_CALL ChartController::addMouseListener(
const uno::Reference< awt::XMouseListener >& xListener )
{
//@todo
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
xWindow->addMouseListener( xListener );
}
void SAL_CALL ChartController::removeMouseListener(
const uno::Reference< awt::XMouseListener >& xListener )
{
//@todo
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
xWindow->removeMouseListener( xListener );
}
void SAL_CALL ChartController::addMouseMotionListener(
const uno::Reference< awt::XMouseMotionListener >& xListener )
{
//@todo
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
xWindow->addMouseMotionListener( xListener );
}
void SAL_CALL ChartController::removeMouseMotionListener(
const uno::Reference< awt::XMouseMotionListener >& xListener )
{
//@todo
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
xWindow->removeMouseMotionListener( xListener );
}
void SAL_CALL ChartController::addPaintListener(
const uno::Reference< awt::XPaintListener >& xListener )
{
//@todo
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
xWindow->addPaintListener( xListener );
}
void SAL_CALL ChartController::removePaintListener(
const uno::Reference< awt::XPaintListener >& xListener )
{
//@todo
uno::Reference<awt::XWindow> xWindow = m_xViewWindow;
if(xWindow.is())
xWindow->removePaintListener( xListener );
}
// impl vcl window controller methods
void ChartController::PrePaint()
{
// forward VCLs PrePaint window event to DrawingLayer
DrawViewWrapper* pDrawViewWrapper = m_pDrawViewWrapper.get();
if (pDrawViewWrapper)
{
pDrawViewWrapper->PrePaint();
}
}
void ChartController::execute_Paint(vcl::RenderContext& rRenderContext, const tools::Rectangle& rRect)
{
try
{
uno::Reference<frame::XModel> xModel(getModel());
//OSL_ENSURE( xModel.is(), "ChartController::execute_Paint: have no model to paint");
if (!xModel.is())
return;
//better performance for big data
uno::Reference<beans::XPropertySet> xProp(m_xChartView, uno::UNO_QUERY);
if (xProp.is())
{
awt::Size aResolution(1000, 1000);
{
SolarMutexGuard aGuard;
auto pChartWindow(GetChartWindow());
if (pChartWindow)
{
aResolution.Width = pChartWindow->GetSizePixel().Width();
aResolution.Height = pChartWindow->GetSizePixel().Height();
}
}
xProp->setPropertyValue( "Resolution", uno::Any( aResolution ));
}
uno::Reference< util::XUpdatable > xUpdatable( m_xChartView, uno::UNO_QUERY );
if (xUpdatable.is())
xUpdatable->update();
{
SolarMutexGuard aGuard;
DrawViewWrapper* pDrawViewWrapper = m_pDrawViewWrapper.get();
if (pDrawViewWrapper)
pDrawViewWrapper->CompleteRedraw(&rRenderContext, vcl::Region(rRect));
}
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
catch( ... )
{
}
}
bool isDoubleClick( const MouseEvent& rMEvt )
{
return rMEvt.GetClicks() == 2 && rMEvt.IsLeft() &&
!rMEvt.IsMod1() && !rMEvt.IsMod2() && !rMEvt.IsShift();
}
void ChartController::startDoubleClickWaiting()
{
SolarMutexGuard aGuard;
m_bWaitingForDoubleClick = true;
sal_uInt64 nDblClkTime = 500;
auto pChartWindow(GetChartWindow());
if( pChartWindow )
{
const MouseSettings& rMSettings = pChartWindow->GetSettings().GetMouseSettings();
nDblClkTime = rMSettings.GetDoubleClickTime();
}
m_aDoubleClickTimer.SetTimeout( nDblClkTime );
m_aDoubleClickTimer.Start();
}
void ChartController::stopDoubleClickWaiting()
{
m_aDoubleClickTimer.Stop();
m_bWaitingForDoubleClick = false;
}
IMPL_LINK_NOARG(ChartController, DoubleClickWaitingHdl, Timer *, void)
{
m_bWaitingForDoubleClick = false;
if( !m_bWaitingForMouseUp && m_aSelection.maybeSwitchSelectionAfterSingleClickWasEnsured() )
{
impl_selectObjectAndNotiy();
SolarMutexGuard aGuard;
auto pChartWindow(GetChartWindow());
if( pChartWindow )
{
vcl::Window::PointerState aPointerState( pChartWindow->GetPointerState() );
MouseEvent aMouseEvent(
aPointerState.maPos,
1/*nClicks*/,
MouseEventModifiers::NONE,
static_cast< sal_uInt16 >( aPointerState.mnState )/*nButtons*/,
0/*nModifier*/ );
impl_SetMousePointer( aMouseEvent );
}
}
}
void ChartController::execute_MouseButtonDown( const MouseEvent& rMEvt )
{
SolarMutexGuard aGuard;
m_bWaitingForMouseUp = true;
m_bFieldButtonDown = false;
if( isDoubleClick(rMEvt) )
stopDoubleClickWaiting();
else
startDoubleClickWaiting();
m_aSelection.remindSelectionBeforeMouseDown();
DrawViewWrapper* pDrawViewWrapper = m_pDrawViewWrapper.get();
auto pChartWindow(GetChartWindow());
if(!pChartWindow || !pDrawViewWrapper )
return;
Point aMPos = pChartWindow->PixelToLogic(rMEvt.GetPosPixel());
// Check if button was clicked
SdrObject* pObject = pDrawViewWrapper->getHitObject(aMPos);
if (pObject)
{
OUString aCID = pObject->GetName();
if (aCID.startsWith("FieldButton"))
{
m_bFieldButtonDown = true;
return; // Don't take any action if button was clicked
}
}
if ( rMEvt.GetButtons() == MOUSE_LEFT )
{
pChartWindow->GrabFocus();
pChartWindow->CaptureMouse();
}
if( pDrawViewWrapper->IsTextEdit() )
{
SdrViewEvent aVEvt;
if ( pDrawViewWrapper->IsTextEditHit( aMPos ) ||
// #i12587# support for shapes in chart
( rMEvt.IsRight() && pDrawViewWrapper->PickAnything( rMEvt, SdrMouseEventKind::BUTTONDOWN, aVEvt ) == SdrHitKind::MarkedObject ) )
{
pDrawViewWrapper->MouseButtonDown(rMEvt, pChartWindow);
return;
}
else
{
EndTextEdit();
}
}
//abort running action
if( pDrawViewWrapper->IsAction() )
{
if( rMEvt.IsRight() )
pDrawViewWrapper->BckAction();
return;
}
if( isDoubleClick(rMEvt) ) //do not change selection if double click
return;//double click is handled further in mousebutton up
SdrHdl* pHitSelectionHdl = nullptr;
//switch from move to resize if handle is hit on a resizable object
if( m_aSelection.isResizeableObjectSelected() )
pHitSelectionHdl = pDrawViewWrapper->PickHandle( aMPos );
//only change selection if no selection handles are hit
if( !pHitSelectionHdl )
{
// #i12587# support for shapes in chart
if ( m_eDrawMode == CHARTDRAW_INSERT &&
( !pDrawViewWrapper->IsMarkedHit( aMPos ) || !m_aSelection.isDragableObjectSelected() ) )
{
if ( m_aSelection.hasSelection() )
{
m_aSelection.clearSelection();
}
if ( !pDrawViewWrapper->IsAction() )
{
if ( pDrawViewWrapper->GetCurrentObjIdentifier() == OBJ_CAPTION )
{
Size aCaptionSize( 2268, 1134 );
pDrawViewWrapper->BegCreateCaptionObj( aMPos, aCaptionSize );
}
else
{
pDrawViewWrapper->BegCreateObj( aMPos);
}
SdrObject* pObj = pDrawViewWrapper->GetCreateObj();
DrawCommandDispatch* pDrawCommandDispatch = m_aDispatchContainer.getDrawCommandDispatch();
if ( pObj && m_pDrawModelWrapper && pDrawCommandDispatch )
{
SfxItemSet aSet( m_pDrawModelWrapper->GetItemPool() );
pDrawCommandDispatch->setAttributes( pObj );
pDrawCommandDispatch->setLineEnds( aSet );
pObj->SetMergedItemSet( aSet );
}
}
impl_SetMousePointer( rMEvt );
return;
}
m_aSelection.adaptSelectionToNewPos(
aMPos,
pDrawViewWrapper,
rMEvt.IsRight(),
m_bWaitingForDoubleClick );
if( !m_aSelection.isRotateableObjectSelected( getModel() ) )
{
m_eDragMode = SdrDragMode::Move;
pDrawViewWrapper->SetDragMode(m_eDragMode);
}
m_aSelection.applySelection(pDrawViewWrapper);
}
if( m_aSelection.isDragableObjectSelected()
&& !rMEvt.IsRight() )
{
//start drag
sal_uInt16 nDrgLog = static_cast<sal_uInt16>(pChartWindow->PixelToLogic(Size(DRGPIX,0)).Width());
SdrDragMethod* pDragMethod = nullptr;
//change selection to 3D scene if rotate mode
SdrDragMode eDragMode = pDrawViewWrapper->GetDragMode();
if( eDragMode==SdrDragMode::Rotate )
{
E3dScene* pScene = SelectionHelper::getSceneToRotate( pDrawViewWrapper->getNamedSdrObject( m_aSelection.getSelectedCID() ) );
if( pScene )
{
DragMethod_RotateDiagram::RotationDirection eRotationDirection(DragMethod_RotateDiagram::ROTATIONDIRECTION_FREE);
if(pHitSelectionHdl)
{
SdrHdlKind eKind = pHitSelectionHdl->GetKind();
if( eKind==SdrHdlKind::Upper || eKind==SdrHdlKind::Lower )
eRotationDirection = DragMethod_RotateDiagram::ROTATIONDIRECTION_X;
else if( eKind==SdrHdlKind::Left || eKind==SdrHdlKind::Right )
eRotationDirection = DragMethod_RotateDiagram::ROTATIONDIRECTION_Y;
else if( eKind==SdrHdlKind::UpperLeft || eKind==SdrHdlKind::UpperRight || eKind==SdrHdlKind::LowerLeft || eKind==SdrHdlKind::LowerRight )
eRotationDirection = DragMethod_RotateDiagram::ROTATIONDIRECTION_Z;
}
pDragMethod = new DragMethod_RotateDiagram( *pDrawViewWrapper, m_aSelection.getSelectedCID(), getModel(), eRotationDirection );
}
}
else
{
OUString aDragMethodServiceName( ObjectIdentifier::getDragMethodServiceName( m_aSelection.getSelectedCID() ) );
if( aDragMethodServiceName == ObjectIdentifier::getPieSegmentDragMethodServiceName() )
pDragMethod = new DragMethod_PieSegment( *pDrawViewWrapper, m_aSelection.getSelectedCID(), getModel() );
}
pDrawViewWrapper->SdrView::BegDragObj(aMPos, nullptr, pHitSelectionHdl, nDrgLog, pDragMethod);
}
impl_SetMousePointer( rMEvt );
}
void ChartController::execute_MouseMove( const MouseEvent& rMEvt )
{
SolarMutexGuard aGuard;
DrawViewWrapper* pDrawViewWrapper = m_pDrawViewWrapper.get();
auto pChartWindow(GetChartWindow());
if(!pChartWindow || !pDrawViewWrapper)
return;
if( m_pDrawViewWrapper->IsTextEdit() )
{
if( m_pDrawViewWrapper->MouseMove(rMEvt,pChartWindow) )
return;
}
if(pDrawViewWrapper->IsAction())
{
pDrawViewWrapper->MovAction( pChartWindow->PixelToLogic( rMEvt.GetPosPixel() ) );
}
impl_SetMousePointer( rMEvt );
}
void ChartController::execute_MouseButtonUp( const MouseEvent& rMEvt )
{
ControllerLockGuardUNO aCLGuard( getModel() );
bool bMouseUpWithoutMouseDown = !m_bWaitingForMouseUp;
m_bWaitingForMouseUp = false;
bool bNotifySelectionChange = false;
{
SolarMutexGuard aGuard;
DrawViewWrapper* pDrawViewWrapper = m_pDrawViewWrapper.get();
auto pChartWindow(GetChartWindow());
if(!pChartWindow || !pDrawViewWrapper)
return;
Point aMPos = pChartWindow->PixelToLogic(rMEvt.GetPosPixel());
// Check if button was clicked
if (m_bFieldButtonDown)
{
m_bFieldButtonDown = false;
SdrObject* pObject = pDrawViewWrapper->getHitObject(aMPos);
if (pObject)
{
OUString aCID = pObject->GetName();
if (aCID.startsWith("FieldButton"))
{
sendPopupRequest(aCID, pObject->GetCurrentBoundRect());
return;
}
}
}
if(pDrawViewWrapper->IsTextEdit())
{
if( pDrawViewWrapper->MouseButtonUp(rMEvt,pChartWindow) )
return;
}
// #i12587# support for shapes in chart
if ( m_eDrawMode == CHARTDRAW_INSERT && pDrawViewWrapper->IsCreateObj() )
{
pDrawViewWrapper->EndCreateObj( SdrCreateCmd::ForceEnd );
{
HiddenUndoContext aUndoContext( m_xUndoManager );
// don't want the positioning Undo action to appear in the UI
impl_switchDiagramPositioningToExcludingPositioning();
}
if ( pDrawViewWrapper->AreObjectsMarked() )
{
if ( pDrawViewWrapper->GetCurrentObjIdentifier() == OBJ_TEXT )
{
executeDispatch_EditText();
}
else
{
SdrObject* pObj = pDrawViewWrapper->getSelectedObject();
if ( pObj )
{
uno::Reference< drawing::XShape > xShape( pObj->getUnoShape(), uno::UNO_QUERY );
if ( xShape.is() )
{
m_aSelection.setSelection( xShape );
m_aSelection.applySelection( pDrawViewWrapper );
}
}
}
}
else
{
m_aSelection.adaptSelectionToNewPos( aMPos, pDrawViewWrapper, rMEvt.IsRight(), m_bWaitingForDoubleClick );
m_aSelection.applySelection( pDrawViewWrapper );
setDrawMode( CHARTDRAW_SELECT );
}
}
else if ( pDrawViewWrapper->IsDragObj() )
{
bool bDraggingDone = false;
SdrDragMethod* pDragMethod = pDrawViewWrapper->SdrView::GetDragMethod();
bool bIsMoveOnly = pDragMethod && pDragMethod->getMoveOnly();
DragMethod_Base* pChartDragMethod = dynamic_cast< DragMethod_Base* >(pDragMethod);
if( pChartDragMethod )
{
UndoGuard aUndoGuard( pChartDragMethod->getUndoDescription(),
m_xUndoManager );
if( pDrawViewWrapper->EndDragObj() )
{
bDraggingDone = true;
aUndoGuard.commit();
}
}
if( !bDraggingDone && pDrawViewWrapper->EndDragObj() )
{
try
{
//end move or size
SdrObject* pObj = pDrawViewWrapper->getSelectedObject();
if( pObj )
{
tools::Rectangle aObjectRect = pObj->GetSnapRect();
awt::Size aPageSize( ChartModelHelper::getPageSize( getModel() ) );
tools::Rectangle aPageRect( 0,0,aPageSize.Width,aPageSize.Height );
const E3dObject* pE3dObject(dynamic_cast< const E3dObject*>(pObj));
if(nullptr != pE3dObject)
{
E3dScene* pScene(pE3dObject->getRootE3dSceneFromE3dObject());
if(nullptr != pScene)
{
aObjectRect = pScene->GetSnapRect();
}
}
ActionDescriptionProvider::ActionType eActionType(ActionDescriptionProvider::ActionType::Move);
if( !bIsMoveOnly && m_aSelection.isResizeableObjectSelected() )
eActionType = ActionDescriptionProvider::ActionType::Resize;
ObjectType eObjectType = ObjectIdentifier::getObjectType( m_aSelection.getSelectedCID() );
UndoGuard aUndoGuard(
ActionDescriptionProvider::createDescription( eActionType, ObjectNameProvider::getName( eObjectType)),
m_xUndoManager );
bool bChanged = false;
ChartModel* pModel = dynamic_cast<ChartModel*>(getModel().get());
if ( eObjectType == OBJECTTYPE_LEGEND )
bChanged = DiagramHelper::switchDiagramPositioningToExcludingPositioning( *pModel, false , true );
bool bMoved = PositionAndSizeHelper::moveObject( m_aSelection.getSelectedCID()
, getModel()
, awt::Rectangle(aObjectRect.getX(),aObjectRect.getY(),aObjectRect.getWidth(),aObjectRect.getHeight())
, awt::Rectangle(aPageRect.getX(),aPageRect.getY(),aPageRect.getWidth(),aPageRect.getHeight()) );
if( bMoved || bChanged )
{
bDraggingDone = true;
aUndoGuard.commit();
}
}
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
//all wanted model changes will take effect
//and all unwanted view modifications are cleaned
}
if( !bDraggingDone ) //mouse wasn't moved while dragging
{
bool bClickedTwiceOnDragableObject = SelectionHelper::isDragableObjectHitTwice( aMPos, m_aSelection.getSelectedCID(), *pDrawViewWrapper );
bool bIsRotateable = m_aSelection.isRotateableObjectSelected( getModel() );
//toggle between move and rotate
if( bIsRotateable && bClickedTwiceOnDragableObject && m_eDragMode==SdrDragMode::Move )
m_eDragMode=SdrDragMode::Rotate;
else
m_eDragMode=SdrDragMode::Move;
pDrawViewWrapper->SetDragMode(m_eDragMode);
if( !m_bWaitingForDoubleClick && m_aSelection.maybeSwitchSelectionAfterSingleClickWasEnsured() )
{
impl_selectObjectAndNotiy();
}
}
else
m_aSelection.resetPossibleSelectionAfterSingleClickWasEnsured();
}
// In tiled rendering drag mode could be not yet over on the call
// that should handle the double-click, so better to perform this check
// always.
if( isDoubleClick(rMEvt) && !bMouseUpWithoutMouseDown /*#i106966#*/ )
{
Point aMousePixel = rMEvt.GetPosPixel();
execute_DoubleClick( &aMousePixel );
}
//@todo ForcePointer(&rMEvt);
pChartWindow->ReleaseMouse();
if( m_aSelection.isSelectionDifferentFromBeforeMouseDown() )
bNotifySelectionChange = true;
}
impl_SetMousePointer( rMEvt );
if(bNotifySelectionChange)
impl_notifySelectionChangeListeners();
}
void ChartController::execute_DoubleClick( const Point* pMousePixel )
{
bool bEditText = false;
if ( m_aSelection.hasSelection() )
{
OUString aCID( m_aSelection.getSelectedCID() );
if ( !aCID.isEmpty() )
{
ObjectType eObjectType = ObjectIdentifier::getObjectType( aCID );
if ( eObjectType == OBJECTTYPE_TITLE )
{
bEditText = true;
}
}
else
{
// #i12587# support for shapes in chart
SdrObject* pObj = DrawViewWrapper::getSdrObject( m_aSelection.getSelectedAdditionalShape() );
if ( dynamic_cast< const SdrTextObj* >(pObj) != nullptr )
{
bEditText = true;
}
}
}
if ( bEditText )
{
executeDispatch_EditText( pMousePixel );
}
else
{
executeDispatch_ObjectProperties();
}
}
void ChartController::execute_Resize()
{
SolarMutexGuard aGuard;
auto pChartWindow(GetChartWindow());
if(pChartWindow)
pChartWindow->Invalidate();
}
void ChartController::execute_Command( const CommandEvent& rCEvt )
{
SolarMutexGuard aGuard;
auto pChartWindow(GetChartWindow());
bool bIsAction = false;
{
DrawViewWrapper* pDrawViewWrapper = m_pDrawViewWrapper.get();
if(!pChartWindow || !pDrawViewWrapper)
return;
bIsAction = m_pDrawViewWrapper->IsAction();
}
// pop-up menu
if(rCEvt.GetCommand() == CommandEventId::ContextMenu && !bIsAction)
{
{
if(pChartWindow)
pChartWindow->ReleaseMouse();
}
if( m_aSelection.isSelectionDifferentFromBeforeMouseDown() )
impl_notifySelectionChangeListeners();
css::uno::Reference< css::awt::XPopupMenu > xPopupMenu( m_xCC->getServiceManager()->createInstanceWithContext(
"com.sun.star.awt.PopupMenu", m_xCC ), css::uno::UNO_QUERY );
Point aPos( rCEvt.GetMousePosPixel() );
if( !rCEvt.IsMouseEvent() )
{
if(pChartWindow)
aPos = pChartWindow->GetPointerState().maPos;
}
OUString aMenuName;
if ( isShapeContext() )
// #i12587# support for shapes in chart
aMenuName = m_pDrawViewWrapper->IsTextEdit() ? OUString( "drawtext" ) : OUString( "draw" );
else
{
// todo: the context menu should be specified by an xml file in uiconfig
if( xPopupMenu.is())
{
sal_Int16 nUniqueId = 1;
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:Cut" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:Copy" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:Paste" );
xPopupMenu->insertSeparator( -1 );
ObjectType eObjectType = ObjectIdentifier::getObjectType( m_aSelection.getSelectedCID() );
Reference< XDiagram > xDiagram = ChartModelHelper::findDiagram( getModel() );
OUString aFormatCommand( lcl_getFormatCommandForObjectCID( m_aSelection.getSelectedCID() ) );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, aFormatCommand );
//some commands for dataseries and points:
if( eObjectType == OBJECTTYPE_DATA_SERIES || eObjectType == OBJECTTYPE_DATA_POINT )
{
bool bIsPoint = ( eObjectType == OBJECTTYPE_DATA_POINT );
uno::Reference< XDataSeries > xSeries = ObjectIdentifier::getDataSeriesForCID( m_aSelection.getSelectedCID(), getModel() );
uno::Reference< chart2::XRegressionCurveContainer > xCurveCnt( xSeries, uno::UNO_QUERY );
Reference< chart2::XRegressionCurve > xTrendline( RegressionCurveHelper::getFirstCurveNotMeanValueLine( xCurveCnt ) );
bool bHasEquation = RegressionCurveHelper::hasEquation( xTrendline );
Reference< chart2::XRegressionCurve > xMeanValue( RegressionCurveHelper::getMeanValueLine( xCurveCnt ) );
bool bHasYErrorBars = StatisticsHelper::hasErrorBars( xSeries );
bool bHasXErrorBars = StatisticsHelper::hasErrorBars( xSeries, false );
bool bHasDataLabelsAtSeries = DataSeriesHelper::hasDataLabelsAtSeries( xSeries );
bool bHasDataLabelsAtPoints = DataSeriesHelper::hasDataLabelsAtPoints( xSeries );
bool bHasDataLabelAtPoint = false;
sal_Int32 nPointIndex = -1;
if( bIsPoint )
{
nPointIndex = ObjectIdentifier::getIndexFromParticleOrCID( m_aSelection.getSelectedCID() );
bHasDataLabelAtPoint = DataSeriesHelper::hasDataLabelAtPoint( xSeries, nPointIndex );
}
bool bSelectedPointIsFormatted = false;
bool bHasFormattedDataPointsOtherThanSelected = false;
Reference< beans::XPropertySet > xSeriesProperties( xSeries, uno::UNO_QUERY );
if( xSeriesProperties.is() )
{
uno::Sequence< sal_Int32 > aAttributedDataPointIndexList;
if( xSeriesProperties->getPropertyValue( "AttributedDataPoints" ) >>= aAttributedDataPointIndexList )
{
if( aAttributedDataPointIndexList.hasElements() )
{
if( bIsPoint )
{
std::vector< sal_Int32 > aIndices( ContainerHelper::SequenceToVector( aAttributedDataPointIndexList ) );
std::vector< sal_Int32 >::iterator aIt = std::find( aIndices.begin(), aIndices.end(), nPointIndex );
if( aIt != aIndices.end())
bSelectedPointIsFormatted = true;
else
bHasFormattedDataPointsOtherThanSelected = true;
}
else
bHasFormattedDataPointsOtherThanSelected = true;
}
}
}
if( bIsPoint )
{
if( bHasDataLabelAtPoint )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:FormatDataLabel" );
if( !bHasDataLabelAtPoint )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertDataLabel" );
else
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DeleteDataLabel" );
if( bSelectedPointIsFormatted )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:ResetDataPoint" );
xPopupMenu->insertSeparator( -1 );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:FormatDataSeries" );
}
Reference< chart2::XChartType > xChartType( DiagramHelper::getChartTypeOfSeries( xDiagram, xSeries ) );
if( xChartType->getChartType() == CHART2_SERVICE_NAME_CHARTTYPE_CANDLESTICK )
{
try
{
Reference< beans::XPropertySet > xChartTypeProp( xChartType, uno::UNO_QUERY );
if( xChartTypeProp.is() )
{
bool bJapaneseStyle = false;
xChartTypeProp->getPropertyValue( "Japanese" ) >>= bJapaneseStyle;
if( bJapaneseStyle )
{
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:FormatStockLoss" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:FormatStockGain" );
}
}
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
}
if( bHasDataLabelsAtSeries )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:FormatDataLabels" );
if( bHasEquation )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:FormatTrendlineEquation" );
if( xMeanValue.is() )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:FormatMeanValue" );
if( bHasXErrorBars )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:FormatXErrorBars" );
if( bHasYErrorBars )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:FormatYErrorBars" );
xPopupMenu->insertSeparator( -1 );
if( !bHasDataLabelsAtSeries )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertDataLabels" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertTrendline" );
if( !xMeanValue.is() )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertMeanValue" );
if( !bHasXErrorBars )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertXErrorBars" );
if( !bHasYErrorBars )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertYErrorBars" );
if( bHasDataLabelsAtSeries || ( bHasDataLabelsAtPoints && bHasFormattedDataPointsOtherThanSelected ) )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DeleteDataLabels" );
if( bHasEquation )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DeleteTrendlineEquation" );
if( xMeanValue.is() )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DeleteMeanValue" );
if( bHasXErrorBars )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DeleteXErrorBars" );
if( bHasYErrorBars )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DeleteYErrorBars" );
if( bHasFormattedDataPointsOtherThanSelected )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:ResetAllDataPoints" );
xPopupMenu->insertSeparator( -1 );
lcl_insertMenuCommand( xPopupMenu, nUniqueId, ".uno:ArrangeRow" );
uno::Reference< awt::XPopupMenu > xArrangePopupMenu(
m_xCC->getServiceManager()->createInstanceWithContext(
"com.sun.star.awt.PopupMenu", m_xCC ), uno::UNO_QUERY );
if( xArrangePopupMenu.is() )
{
sal_Int16 nSubId = nUniqueId + 1;
lcl_insertMenuCommand( xArrangePopupMenu, nSubId++, ".uno:Forward" );
lcl_insertMenuCommand( xArrangePopupMenu, nSubId, ".uno:Backward" );
xPopupMenu->setPopupMenu( nUniqueId, xArrangePopupMenu );
nUniqueId = nSubId;
}
++nUniqueId;
}
else if( eObjectType == OBJECTTYPE_DATA_CURVE )
{
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DeleteTrendline" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:FormatTrendlineEquation" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertTrendlineEquation" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertTrendlineEquationAndR2" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertR2Value" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DeleteTrendlineEquation" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DeleteR2Value" );
}
else if( eObjectType == OBJECTTYPE_DATA_CURVE_EQUATION )
{
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertR2Value" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DeleteR2Value" );
}
//some commands for axes: and grids
else if( eObjectType == OBJECTTYPE_AXIS || eObjectType == OBJECTTYPE_GRID || eObjectType == OBJECTTYPE_SUBGRID )
{
Reference< XAxis > xAxis = ObjectIdentifier::getAxisForCID( m_aSelection.getSelectedCID(), getModel() );
if( xAxis.is() && xDiagram.is() )
{
sal_Int32 nDimensionIndex = -1;
sal_Int32 nCooSysIndex = -1;
sal_Int32 nAxisIndex = -1;
AxisHelper::getIndicesForAxis( xAxis, xDiagram, nCooSysIndex, nDimensionIndex, nAxisIndex );
bool bIsSecondaryAxis = nAxisIndex!=0;
bool bIsAxisVisible = AxisHelper::isAxisVisible( xAxis );
bool bIsMajorGridVisible = AxisHelper::isGridShown( nDimensionIndex, nCooSysIndex, true /*bMainGrid*/, xDiagram );
bool bIsMinorGridVisible = AxisHelper::isGridShown( nDimensionIndex, nCooSysIndex, false /*bMainGrid*/, xDiagram );
bool bHasTitle = false;
uno::Reference< XTitled > xTitled( xAxis, uno::UNO_QUERY );
if( xTitled.is())
bHasTitle = !TitleHelper::getCompleteString( xTitled->getTitleObject() ).isEmpty();
if( eObjectType != OBJECTTYPE_AXIS && bIsAxisVisible )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:FormatAxis" );
if( eObjectType != OBJECTTYPE_GRID && bIsMajorGridVisible && !bIsSecondaryAxis )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:FormatMajorGrid" );
if( eObjectType != OBJECTTYPE_SUBGRID && bIsMinorGridVisible && !bIsSecondaryAxis )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:FormatMinorGrid" );
xPopupMenu->insertSeparator( -1 );
if( eObjectType != OBJECTTYPE_AXIS && !bIsAxisVisible )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertAxis" );
if( eObjectType != OBJECTTYPE_GRID && !bIsMajorGridVisible && !bIsSecondaryAxis )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertMajorGrid" );
if( eObjectType != OBJECTTYPE_SUBGRID && !bIsMinorGridVisible && !bIsSecondaryAxis )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertMinorGrid" );
if( !bHasTitle )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertAxisTitle" );
if( bIsAxisVisible )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DeleteAxis" );
if( bIsMajorGridVisible && !bIsSecondaryAxis )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DeleteMajorGrid" );
if( bIsMinorGridVisible && !bIsSecondaryAxis )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DeleteMinorGrid" );
}
}
if( eObjectType == OBJECTTYPE_DATA_STOCK_LOSS )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:FormatStockGain" );
else if( eObjectType == OBJECTTYPE_DATA_STOCK_GAIN )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:FormatStockLoss" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:TransformDialog" );
if( eObjectType == OBJECTTYPE_PAGE || eObjectType == OBJECTTYPE_DIAGRAM
|| eObjectType == OBJECTTYPE_DIAGRAM_WALL
|| eObjectType == OBJECTTYPE_DIAGRAM_FLOOR
|| eObjectType == OBJECTTYPE_UNKNOWN )
{
if( eObjectType != OBJECTTYPE_UNKNOWN )
xPopupMenu->insertSeparator( -1 );
bool bHasLegend = LegendHelper::hasLegend( xDiagram );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertTitles" );
if( !bHasLegend )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertLegend" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:InsertRemoveAxes" );
if( bHasLegend )
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DeleteLegend" );
}
xPopupMenu->insertSeparator( -1 );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DiagramType" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DataRanges" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:DiagramData" );
lcl_insertMenuCommand( xPopupMenu, nUniqueId++, ".uno:View3D" );
}
}
css::uno::Sequence< css::uno::Any > aArgs( 3 );
aArgs[0] <<= comphelper::makePropertyValue( "IsContextMenu", true );
aArgs[1] <<= comphelper::makePropertyValue( "Frame", m_xFrame );
aArgs[2] <<= comphelper::makePropertyValue( "Value", aMenuName );
css::uno::Reference< css::frame::XPopupMenuController > xPopupController(
m_xCC->getServiceManager()->createInstanceWithArgumentsAndContext(
"com.sun.star.comp.framework.ResourceMenuController", aArgs, m_xCC ), css::uno::UNO_QUERY );
if ( !xPopupController.is() || !xPopupMenu.is() )
return;
if (comphelper::LibreOfficeKit::isActive())
{
PopupMenu* pPopupMenu = static_cast<PopupMenu*>(VCLXMenu::GetImplementation(xPopupMenu)->GetMenu());
pPopupMenu->SetLOKNotifier(SfxViewShell::Current());
// the context menu expects a position related to the document window,
// not to the chart window
SfxInPlaceClient* pIPClient = SfxViewShell::Current()->GetIPClient();
if (pIPClient)
{
vcl::Window* pRootWin = pIPClient->GetEditWin();
if (pRootWin)
{
Point aOffset = pChartWindow->GetOffsetPixelFrom(*pRootWin);
aPos += aOffset;
}
}
}
xPopupController->setPopupMenu( xPopupMenu );
xPopupMenu->execute( css::uno::Reference< css::awt::XWindowPeer >( m_xFrame->getContainerWindow(), css::uno::UNO_QUERY ),
css::awt::Rectangle( aPos.X(), aPos.Y(), 0, 0 ),
css::awt::PopupMenuDirection::EXECUTE_DEFAULT );
css::uno::Reference< css::lang::XComponent > xComponent( xPopupController, css::uno::UNO_QUERY );
if ( xComponent.is() )
xComponent->dispose();
}
else if( ( rCEvt.GetCommand() == CommandEventId::StartExtTextInput ) ||
( rCEvt.GetCommand() == CommandEventId::ExtTextInput ) ||
( rCEvt.GetCommand() == CommandEventId::EndExtTextInput ) ||
( rCEvt.GetCommand() == CommandEventId::InputContextChange ) )
{
//#i84417# enable editing with IME
if( m_pDrawViewWrapper )
m_pDrawViewWrapper->Command( rCEvt, pChartWindow );
}
}
bool ChartController::execute_KeyInput( const KeyEvent& rKEvt )
{
SolarMutexGuard aGuard;
bool bReturn=false;
DrawViewWrapper* pDrawViewWrapper = m_pDrawViewWrapper.get();
auto pChartWindow(GetChartWindow());
if(!pChartWindow || !pDrawViewWrapper)
return bReturn;
// handle accelerators
if( ! m_apAccelExecute.get() && m_xFrame.is() && m_xCC.is() )
{
m_apAccelExecute = ::svt::AcceleratorExecute::createAcceleratorHelper();
OSL_ASSERT( m_apAccelExecute.get());
if( m_apAccelExecute.get() )
m_apAccelExecute->init( m_xCC, m_xFrame );
}
vcl::KeyCode aKeyCode( rKEvt.GetKeyCode());
sal_uInt16 nCode = aKeyCode.GetCode();
bool bAlternate = aKeyCode.IsMod2();
bool bCtrl = aKeyCode.IsMod1();
if( m_apAccelExecute.get() )
bReturn = m_apAccelExecute->execute( aKeyCode );
if( bReturn )
return bReturn;
{
if( pDrawViewWrapper->IsTextEdit() )
{
if( pDrawViewWrapper->KeyInput(rKEvt, pChartWindow) )
{
bReturn = true;
if( nCode == KEY_ESCAPE )
{
EndTextEdit();
}
}
}
}
// keyboard accessibility
ObjectType eObjectType = ObjectIdentifier::getObjectType( m_aSelection.getSelectedCID() );
if( ! bReturn )
{
// Navigation (Tab/F3/Home/End)
uno::Reference< XChartDocument > xChartDoc( getModel(), uno::UNO_QUERY );
ObjectKeyNavigation aObjNav( m_aSelection.getSelectedOID(), xChartDoc, ExplicitValueProvider::getExplicitValueProvider( m_xChartView ));
awt::KeyEvent aKeyEvent( ::svt::AcceleratorExecute::st_VCLKey2AWTKey( aKeyCode ));
bReturn = aObjNav.handleKeyEvent( aKeyEvent );
if( bReturn )
{
ObjectIdentifier aNewOID = aObjNav.getCurrentSelection();
uno::Any aNewSelection;
if ( aNewOID.isValid() && !ObjectHierarchy::isRootNode( aNewOID ) )
{
aNewSelection = aNewOID.getAny();
}
if ( m_eDragMode == SdrDragMode::Rotate && !SelectionHelper::isRotateableObject( aNewOID.getObjectCID(), getModel() ) )
{
m_eDragMode = SdrDragMode::Move;
}
bReturn = select( aNewSelection );
}
}
// Position and Size (+/-/arrow-keys) or pie segment dragging
if( ! bReturn )
{
// pie segment dragging
// note: could also be done for data series
if( eObjectType == OBJECTTYPE_DATA_POINT &&
ObjectIdentifier::getDragMethodServiceName( m_aSelection.getSelectedCID() ) ==
ObjectIdentifier::getPieSegmentDragMethodServiceName())
{
bool bDrag = false;
bool bDragInside = false;
if( nCode == KEY_ADD ||
nCode == KEY_SUBTRACT )
{
bDrag = true;
bDragInside = ( nCode == KEY_SUBTRACT );
}
else if(
nCode == KEY_LEFT ||
nCode == KEY_RIGHT ||
nCode == KEY_UP ||
nCode == KEY_DOWN )
{
bDrag = true;
OUString aParameter( ObjectIdentifier::getDragParameterString( m_aSelection.getSelectedCID() ));
sal_Int32 nOffsetPercentDummy( 0 );
awt::Point aMinimumPosition( 0, 0 );
awt::Point aMaximumPosition( 0, 0 );
ObjectIdentifier::parsePieSegmentDragParameterString(
aParameter, nOffsetPercentDummy, aMinimumPosition, aMaximumPosition );
aMaximumPosition.Y -= aMinimumPosition.Y;
aMaximumPosition.X -= aMinimumPosition.X;
bDragInside =
(nCode == KEY_RIGHT && (aMaximumPosition.X < 0)) ||
(nCode == KEY_LEFT && (aMaximumPosition.X > 0)) ||
(nCode == KEY_DOWN && (aMaximumPosition.Y < 0)) ||
(nCode == KEY_UP && (aMaximumPosition.Y > 0));
}
if( bDrag )
{
double fAmount = bAlternate ? 0.01 : 0.05;
if( bDragInside )
fAmount *= -1.0;
bReturn = impl_DragDataPoint( m_aSelection.getSelectedCID(), fAmount );
}
}
else
{
// size
if( nCode == KEY_ADD ||
nCode == KEY_SUBTRACT )
{
if( eObjectType == OBJECTTYPE_DIAGRAM )
{
// default 1 mm in each direction
double fGrowAmountX = 200.0;
double fGrowAmountY = 200.0;
if( bAlternate && pChartWindow )
{
// together with Alt-key: 1 px in each direction
if( pChartWindow )
{
Size aPixelSize = pChartWindow->PixelToLogic( Size( 2, 2 ));
fGrowAmountX = static_cast< double >( aPixelSize.Width());
fGrowAmountY = static_cast< double >( aPixelSize.Height());
}
}
if( nCode == KEY_SUBTRACT )
{
fGrowAmountX = -fGrowAmountX;
fGrowAmountY = -fGrowAmountY;
}
bReturn = impl_moveOrResizeObject(
m_aSelection.getSelectedCID(), CENTERED_RESIZE_OBJECT, fGrowAmountX, fGrowAmountY );
}
}
// position
else if( nCode == KEY_LEFT ||
nCode == KEY_RIGHT ||
nCode == KEY_UP ||
nCode == KEY_DOWN )
{
if( m_aSelection.isDragableObjectSelected() )
{
// default 1 mm
double fShiftAmountX = 100.0;
double fShiftAmountY = 100.0;
if( bAlternate && pChartWindow )
{
// together with Alt-key: 1 px
if(pChartWindow)
{
Size aPixelSize = pChartWindow->PixelToLogic( Size( 1, 1 ));
fShiftAmountX = static_cast< double >( aPixelSize.Width());
fShiftAmountY = static_cast< double >( aPixelSize.Height());
}
}
switch( nCode )
{
case KEY_LEFT:
fShiftAmountX = -fShiftAmountX;
fShiftAmountY = 0.0;
break;
case KEY_RIGHT:
fShiftAmountY = 0.0;
break;
case KEY_UP:
fShiftAmountX = 0.0;
fShiftAmountY = -fShiftAmountY;
break;
case KEY_DOWN:
fShiftAmountX = 0.0;
break;
}
if( !m_aSelection.getSelectedCID().isEmpty() )
{
//move chart objects
bReturn = impl_moveOrResizeObject(
m_aSelection.getSelectedCID(), MOVE_OBJECT, fShiftAmountX, fShiftAmountY );
}
else
{
//move additional shapes
uno::Reference< drawing::XShape > xShape( m_aSelection.getSelectedAdditionalShape() );
if( xShape.is() )
{
awt::Point aPos( xShape->getPosition() );
awt::Size aSize( xShape->getSize() );
awt::Size aPageSize( ChartModelHelper::getPageSize( getModel() ) );
aPos.X = static_cast< long >( static_cast< double >( aPos.X ) + fShiftAmountX );
aPos.Y = static_cast< long >( static_cast< double >( aPos.Y ) + fShiftAmountY );
if( aPos.X + aSize.Width > aPageSize.Width )
aPos.X = aPageSize.Width - aSize.Width;
if( aPos.X < 0 )
aPos.X = 0;
if( aPos.Y + aSize.Height > aPageSize.Height )
aPos.Y = aPageSize.Height - aSize.Height;
if( aPos.Y < 0 )
aPos.Y = 0;
xShape->setPosition( aPos );
}
}
}
}
}
}
// dumping the shape
if( !bReturn && bCtrl && nCode == KEY_F12)
{
uno::Reference< qa::XDumper > xChartModel( getModel(), uno::UNO_QUERY );
if(xChartModel.is())
{
OUString aDump = xChartModel->dump();
SAL_WARN("chart2", aDump);
}
}
// text edit
if( ! bReturn &&
nCode == KEY_F2 )
{
if( eObjectType == OBJECTTYPE_TITLE )
{
executeDispatch_EditText();
bReturn = true;
}
}
// deactivate inplace mode (this code should be unnecessary, but
// unfortunately is not)
if( ! bReturn &&
nCode == KEY_ESCAPE )
{
uno::Reference< frame::XDispatchHelper > xDispatchHelper( frame::DispatchHelper::create(m_xCC) );
uno::Sequence< beans::PropertyValue > aArgs;
xDispatchHelper->executeDispatch(
uno::Reference< frame::XDispatchProvider >( m_xFrame, uno::UNO_QUERY ),
".uno:TerminateInplaceActivation",
"_parent",
frame::FrameSearchFlag::PARENT,
aArgs );
bReturn = true;
}
if( ! bReturn &&
(nCode == KEY_DELETE || nCode == KEY_BACKSPACE ))
{
bReturn = executeDispatch_Delete();
if( ! bReturn )
{
std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(pChartWindow ? pChartWindow->GetFrameWeld() : nullptr,
VclMessageType::Info, VclButtonsType::Ok,
SchResId(STR_ACTION_NOTPOSSIBLE)));
xInfoBox->run();
}
}
return bReturn;
}
bool ChartController::requestQuickHelp(
::Point aAtLogicPosition,
bool bIsBalloonHelp,
OUString & rOutQuickHelpText,
awt::Rectangle & rOutEqualRect )
{
uno::Reference< frame::XModel > xChartModel;
if( m_aModel.is())
xChartModel.set( getModel() );
if( !xChartModel.is())
return false;
// help text
OUString aCID;
if( m_pDrawViewWrapper )
{
aCID = SelectionHelper::getHitObjectCID(
aAtLogicPosition, *m_pDrawViewWrapper );
}
bool bResult( !aCID.isEmpty());
if( bResult )
{
// get help text
rOutQuickHelpText = ObjectNameProvider::getHelpText( aCID, xChartModel, bIsBalloonHelp /* bVerbose */ );
// set rectangle
ExplicitValueProvider * pValueProvider(
ExplicitValueProvider::getExplicitValueProvider( m_xChartView ));
if( pValueProvider )
rOutEqualRect = pValueProvider->getRectangleOfObject( aCID, true );
}
return bResult;
}
// XSelectionSupplier (optional interface)
sal_Bool SAL_CALL ChartController::select( const uno::Any& rSelection )
{
bool bSuccess = false;
if ( rSelection.hasValue() )
{
const uno::Type& rType = rSelection.getValueType();
if ( rType == cppu::UnoType< OUString >::get() )
{
OUString aNewCID;
if ( ( rSelection >>= aNewCID ) && m_aSelection.setSelection( aNewCID ) )
{
bSuccess = true;
}
}
else if ( rType == cppu::UnoType<drawing::XShape>::get() )
{
uno::Reference< drawing::XShape > xShape;
if ( ( rSelection >>= xShape ) && m_aSelection.setSelection( xShape ) )
{
bSuccess = true;
}
}
}
else
{
if ( m_aSelection.hasSelection() )
{
m_aSelection.clearSelection();
bSuccess = true;
}
}
if ( bSuccess )
{
SolarMutexGuard aGuard;
if ( m_pDrawViewWrapper && m_pDrawViewWrapper->IsTextEdit() )
{
EndTextEdit();
}
impl_selectObjectAndNotiy();
auto pChartWindow(GetChartWindow());
if ( pChartWindow )
{
pChartWindow->Invalidate();
}
return true;
}
return false;
}
uno::Any SAL_CALL ChartController::getSelection()
{
uno::Any aReturn;
if ( m_aSelection.hasSelection() )
{
OUString aCID( m_aSelection.getSelectedCID() );
if ( !aCID.isEmpty() )
{
aReturn <<= aCID;
}
else
{
// #i12587# support for shapes in chart
aReturn <<= m_aSelection.getSelectedAdditionalShape();
}
}
return aReturn;
}
void SAL_CALL ChartController::addSelectionChangeListener( const uno::Reference<view::XSelectionChangeListener> & xListener )
{
SolarMutexGuard aGuard;
if( impl_isDisposedOrSuspended() )//@todo? allow adding of listeners in suspend mode?
return; //behave passive if already disposed or suspended
//--add listener
m_aLifeTimeManager.m_aListenerContainer.addInterface( cppu::UnoType<view::XSelectionChangeListener>::get(), xListener );
}
void SAL_CALL ChartController::removeSelectionChangeListener( const uno::Reference<view::XSelectionChangeListener> & xListener )
{
SolarMutexGuard aGuard;
if( impl_isDisposedOrSuspended() ) //@todo? allow removing of listeners in suspend mode?
return; //behave passive if already disposed or suspended
//--remove listener
m_aLifeTimeManager.m_aListenerContainer.removeInterface( cppu::UnoType<view::XSelectionChangeListener>::get(), xListener );
}
void ChartController::impl_notifySelectionChangeListeners()
{
::cppu::OInterfaceContainerHelper* pIC = m_aLifeTimeManager.m_aListenerContainer
.getContainer( cppu::UnoType<view::XSelectionChangeListener>::get() );
if( pIC )
{
uno::Reference< view::XSelectionSupplier > xSelectionSupplier(this);
lang::EventObject aEvent( xSelectionSupplier );
::cppu::OInterfaceIteratorHelper aIt( *pIC );
while( aIt.hasMoreElements() )
{
uno::Reference< view::XSelectionChangeListener > xListener( aIt.next(), uno::UNO_QUERY );
if( xListener.is() )
xListener->selectionChanged( aEvent );
}
}
}
void ChartController::impl_selectObjectAndNotiy()
{
{
SolarMutexGuard aGuard;
DrawViewWrapper* pDrawViewWrapper = m_pDrawViewWrapper.get();
if( pDrawViewWrapper )
{
pDrawViewWrapper->SetDragMode( m_eDragMode );
m_aSelection.applySelection( m_pDrawViewWrapper.get() );
}
}
impl_notifySelectionChangeListeners();
}
bool ChartController::impl_moveOrResizeObject(
const OUString & rCID,
eMoveOrResizeType eType,
double fAmountLogicX,
double fAmountLogicY )
{
bool bResult = false;
bool bNeedResize = ( eType == CENTERED_RESIZE_OBJECT );
uno::Reference< frame::XModel > xChartModel( getModel() );
uno::Reference< beans::XPropertySet > xObjProp(
ObjectIdentifier::getObjectPropertySet( rCID, xChartModel ));
if( xObjProp.is())
{
awt::Size aRefSize = ChartModelHelper::getPageSize( xChartModel );
chart2::RelativePosition aRelPos;
chart2::RelativeSize aRelSize;
bool bDeterminePos = !(xObjProp->getPropertyValue( "RelativePosition") >>= aRelPos);
bool bDetermineSize = !bNeedResize || !(xObjProp->getPropertyValue( "RelativeSize") >>= aRelSize);
if( ( bDeterminePos || bDetermineSize ) &&
( aRefSize.Width > 0 && aRefSize.Height > 0 ) )
{
ExplicitValueProvider * pValueProvider(
ExplicitValueProvider::getExplicitValueProvider( m_xChartView ));
if( pValueProvider )
{
awt::Rectangle aRect( pValueProvider->getRectangleOfObject( rCID ));
double fWidth = static_cast< double >( aRefSize.Width );
double fHeight = static_cast< double >( aRefSize.Height );
if( bDetermineSize )
{
aRelSize.Primary = static_cast< double >( aRect.Width ) / fWidth;
aRelSize.Secondary = static_cast< double >( aRect.Height ) / fHeight;
}
if( bDeterminePos )
{
if( bNeedResize && aRelSize.Primary > 0.0 && aRelSize.Secondary > 0.0 )
{
aRelPos.Primary = (static_cast< double >( aRect.X ) / fWidth) +
(aRelSize.Primary / 2.0);
aRelPos.Secondary = (static_cast< double >( aRect.Y ) / fHeight) +
(aRelSize.Secondary / 2.0);
aRelPos.Anchor = drawing::Alignment_CENTER;
}
else
{
aRelPos.Primary = static_cast< double >( aRect.X ) / fWidth;
aRelPos.Secondary = static_cast< double >( aRect.Y ) / fHeight;
aRelPos.Anchor = drawing::Alignment_TOP_LEFT;
}
}
}
}
if( eType == CENTERED_RESIZE_OBJECT )
bResult = lcl_GrowAndShiftLogic( aRelPos, aRelSize, aRefSize, fAmountLogicX, fAmountLogicY );
else if( eType == MOVE_OBJECT )
bResult = lcl_MoveObjectLogic( aRelPos, aRelSize, aRefSize, fAmountLogicX, fAmountLogicY );
if( bResult )
{
ActionDescriptionProvider::ActionType eActionType(ActionDescriptionProvider::ActionType::Move);
if( bNeedResize )
eActionType = ActionDescriptionProvider::ActionType::Resize;
ObjectType eObjectType = ObjectIdentifier::getObjectType( rCID );
UndoGuard aUndoGuard( ActionDescriptionProvider::createDescription(
eActionType, ObjectNameProvider::getName( eObjectType )), m_xUndoManager );
{
ControllerLockGuardUNO aCLGuard( xChartModel );
xObjProp->setPropertyValue( "RelativePosition", uno::Any( aRelPos ));
if( bNeedResize || (eObjectType == OBJECTTYPE_DIAGRAM) )//Also set an explicit size at the diagram when an explicit position is set
xObjProp->setPropertyValue( "RelativeSize", uno::Any( aRelSize ));
}
aUndoGuard.commit();
}
}
return bResult;
}
bool ChartController::impl_DragDataPoint( const OUString & rCID, double fAdditionalOffset )
{
bool bResult = false;
if( fAdditionalOffset < -1.0 || fAdditionalOffset > 1.0 || fAdditionalOffset == 0.0 )
return bResult;
sal_Int32 nDataPointIndex = ObjectIdentifier::getIndexFromParticleOrCID( rCID );
uno::Reference< chart2::XDataSeries > xSeries(
ObjectIdentifier::getDataSeriesForCID( rCID, getModel() ));
if( xSeries.is())
{
try
{
uno::Reference< beans::XPropertySet > xPointProp( xSeries->getDataPointByIndex( nDataPointIndex ));
double fOffset = 0.0;
if( xPointProp.is() &&
(xPointProp->getPropertyValue( "Offset" ) >>= fOffset ) &&
(( fAdditionalOffset > 0.0 && fOffset < 1.0 ) || (fOffset > 0.0)) )
{
fOffset += fAdditionalOffset;
if( fOffset > 1.0 )
fOffset = 1.0;
else if( fOffset < 0.0 )
fOffset = 0.0;
xPointProp->setPropertyValue( "Offset", uno::Any( fOffset ));
bResult = true;
}
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
}
return bResult;
}
void ChartController::impl_SetMousePointer( const MouseEvent & rEvent )
{
SolarMutexGuard aGuard;
auto pChartWindow(GetChartWindow());
if (!m_pDrawViewWrapper || !pChartWindow)
return;
Point aMousePos( pChartWindow->PixelToLogic( rEvent.GetPosPixel()));
sal_uInt16 nModifier = rEvent.GetModifier();
bool bLeftDown = rEvent.IsLeft();
// Check if object is for field button and set the normal arrow pointer in this case
SdrObject* pObject = m_pDrawViewWrapper->getHitObject(aMousePos);
if (pObject && pObject->GetName().startsWith("FieldButton"))
{
pChartWindow->SetPointer(Pointer(PointerStyle::Arrow));
return;
}
if ( m_pDrawViewWrapper->IsTextEdit() )
{
if( m_pDrawViewWrapper->IsTextEditHit( aMousePos ) )
{
pChartWindow->SetPointer( m_pDrawViewWrapper->GetPreferredPointer(
aMousePos, pChartWindow, nModifier, bLeftDown ) );
return;
}
}
else if( m_pDrawViewWrapper->IsAction() )
{
return;//don't change pointer during running action
}
SdrHdl* pHitSelectionHdl = nullptr;
if( m_aSelection.isResizeableObjectSelected() )
pHitSelectionHdl = m_pDrawViewWrapper->PickHandle( aMousePos );
if( pHitSelectionHdl )
{
Pointer aPointer = m_pDrawViewWrapper->GetPreferredPointer(
aMousePos, pChartWindow, nModifier, bLeftDown );
bool bForceArrowPointer = false;
ObjectIdentifier aOID( m_aSelection.getSelectedOID() );
switch( aPointer.GetStyle())
{
case PointerStyle::NSize:
case PointerStyle::SSize:
case PointerStyle::WSize:
case PointerStyle::ESize:
case PointerStyle::NWSize:
case PointerStyle::NESize:
case PointerStyle::SWSize:
case PointerStyle::SESize:
if( ! m_aSelection.isResizeableObjectSelected() )
bForceArrowPointer = true;
break;
case PointerStyle::Move:
if ( !aOID.isDragableObject() )
bForceArrowPointer = true;
break;
case PointerStyle::MovePoint:
case PointerStyle::MoveBezierWeight:
// there is no point-editing in a chart
// the PointerStyle::MoveBezierWeight appears in 3d data points
bForceArrowPointer = true;
break;
default:
break;
}
if( bForceArrowPointer )
pChartWindow->SetPointer( Pointer( PointerStyle::Arrow ));
else
pChartWindow->SetPointer( aPointer );
return;
}
// #i12587# support for shapes in chart
if ( m_eDrawMode == CHARTDRAW_INSERT &&
( !m_pDrawViewWrapper->IsMarkedHit( aMousePos ) || !m_aSelection.isDragableObjectSelected() ) )
{
PointerStyle ePointerStyle = PointerStyle::DrawRect;
SdrObjKind eKind = static_cast< SdrObjKind >( m_pDrawViewWrapper->GetCurrentObjIdentifier() );
switch ( eKind )
{
case OBJ_LINE:
{
ePointerStyle = PointerStyle::DrawLine;
}
break;
case OBJ_RECT:
case OBJ_CUSTOMSHAPE:
{
ePointerStyle = PointerStyle::DrawRect;
}
break;
case OBJ_CIRC:
{
ePointerStyle = PointerStyle::DrawEllipse;
}
break;
case OBJ_FREELINE:
{
ePointerStyle = PointerStyle::DrawPolygon;
}
break;
case OBJ_TEXT:
{
ePointerStyle = PointerStyle::DrawText;
}
break;
case OBJ_CAPTION:
{
ePointerStyle = PointerStyle::DrawCaption;
}
break;
default:
{
ePointerStyle = PointerStyle::DrawRect;
}
break;
}
pChartWindow->SetPointer( Pointer( ePointerStyle ) );
return;
}
OUString aHitObjectCID(
SelectionHelper::getHitObjectCID(
aMousePos, *m_pDrawViewWrapper, true /*bGetDiagramInsteadOf_Wall*/ ));
if( m_pDrawViewWrapper->IsTextEdit() )
{
if( aHitObjectCID == m_aSelection.getSelectedCID() )
{
pChartWindow->SetPointer( Pointer( PointerStyle::Arrow ));
return;
}
}
if( aHitObjectCID.isEmpty() )
{
//additional shape was hit
pChartWindow->SetPointer( PointerStyle::Move );
}
else if( ObjectIdentifier::isDragableObject( aHitObjectCID ) )
{
if( (m_eDragMode == SdrDragMode::Rotate)
&& SelectionHelper::isRotateableObject( aHitObjectCID
, getModel() ) )
pChartWindow->SetPointer( Pointer( PointerStyle::Rotate ) );
else
{
ObjectType eHitObjectType = ObjectIdentifier::getObjectType( aHitObjectCID );
if( eHitObjectType == OBJECTTYPE_DATA_POINT )
{
if( !ObjectIdentifier::areSiblings(aHitObjectCID,m_aSelection.getSelectedCID())
&& !ObjectIdentifier::areIdenticalObjects(aHitObjectCID,m_aSelection.getSelectedCID()) )
{
pChartWindow->SetPointer( Pointer( PointerStyle::Arrow ));
return;
}
}
pChartWindow->SetPointer( PointerStyle::Move );
}
}
else
pChartWindow->SetPointer( Pointer( PointerStyle::Arrow ));
}
css::uno::Reference<css::uno::XInterface> const & ChartController::getChartView()
{
return m_xChartView;
}
void ChartController::sendPopupRequest(OUString const & rCID, tools::Rectangle aRectangle)
{
ChartModel* pChartModel = dynamic_cast<ChartModel*>(m_aModel->getModel().get());
if (!pChartModel)
return;
uno::Reference<chart2::data::XPivotTableDataProvider> xPivotTableDataProvider;
xPivotTableDataProvider.set(pChartModel->getDataProvider(), uno::UNO_QUERY);
if (!xPivotTableDataProvider.is())
return;
OUString sPivotTableName = xPivotTableDataProvider->getPivotTableName();
PopupRequest* pPopupRequest = dynamic_cast<PopupRequest*>(pChartModel->getPopupRequest().get());
if (!pPopupRequest)
return;
// Get dimension index from CID
sal_Int32 nStartPos = rCID.lastIndexOf('.');
nStartPos++;
sal_Int32 nEndPos = rCID.getLength();
OUString sDimensionIndex = rCID.copy(nStartPos, nEndPos - nStartPos);
sal_Int32 nDimensionIndex = sDimensionIndex.toInt32();
awt::Rectangle xRectangle {
sal_Int32(aRectangle.Left()),
sal_Int32(aRectangle.Top()),
sal_Int32(aRectangle.GetWidth()),
sal_Int32(aRectangle.GetHeight())
};
uno::Sequence<beans::PropertyValue> aCallbackData = comphelper::InitPropertySequence(
{
{"Rectangle", uno::makeAny<awt::Rectangle>(xRectangle)},
{"DimensionIndex", uno::makeAny<sal_Int32>(nDimensionIndex)},
{"PivotTableName", uno::makeAny<OUString>(sPivotTableName)},
});
pPopupRequest->getCallback()->notify(uno::makeAny(aCallbackData));
}
} //namespace chart
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V522 There might be dereferencing of a potential null pointer 'pModel'.
↑ V571 Recurring check. The 'pChartWindow' condition was already verified in line 1435.
↑ V1019 Compound assignment expression is used inside condition.
↑ V571 Recurring check. The 'pChartWindow' condition was already verified in line 1465.
↑ V1019 Compound assignment expression is used inside condition.