/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <sal/config.h>
#include <sal/log.hxx>
#include <cassert>
#include <com/sun/star/document/PrinterIndependentLayout.hpp>
#include <com/sun/star/drawing/XDrawPage.hpp>
#include <com/sun/star/drawing/XDrawPageSupplier.hpp>
#include <com/sun/star/frame/Desktop.hpp>
#include <com/sun/star/frame/XSynchronousFrameLoader.hpp>
#include <com/sun/star/io/IOException.hpp>
#include <com/sun/star/lang/WrappedTargetRuntimeException.hpp>
#include <com/sun/star/text/XTextDocument.hpp>
#include <com/sun/star/text/XTextRange.hpp>
#include <o3tl/any.hxx>
#include <o3tl/safeint.hxx>
#include <xmloff/xmlnmspe.hxx>
#include <xmloff/xmltkmap.hxx>
#include <xmloff/xmlictxt.hxx>
#include <xmloff/txtimp.hxx>
#include <xmloff/nmspmap.hxx>
#include <xmloff/XMLTextShapeImportHelper.hxx>
#include <xmloff/XMLFontStylesContext.hxx>
#include <xmloff/ProgressBarHelper.hxx>
#include <doc.hxx>
#include <drawdoc.hxx>
#include <IDocumentSettingAccess.hxx>
#include <IDocumentDeviceAccess.hxx>
#include <IDocumentListsAccess.hxx>
#include <IDocumentStylePoolAccess.hxx>
#include <IDocumentDrawModelAccess.hxx>
#include <unofreg.hxx>
#include <TextCursorHelper.hxx>
#include <unotext.hxx>
#include <unotextrange.hxx>
#include <unocrsr.hxx>
#include <poolfmt.hxx>
#include <ndtxt.hxx>
#include <editsh.hxx>
#include <strings.hrc>
#include <svl/stritem.hxx>
#include "xmlimp.hxx"
#include "xmlimpit.hxx"
#include "xmltexti.hxx"
#include <list.hxx>
#include <swdll.hxx>
#include <xmloff/DocumentSettingsContext.hxx>
#include <docsh.hxx>
#include <editeng/unolingu.hxx>
#include <svx/svdmodel.hxx>
#include <svx/xmlgrhlp.hxx>
#include <svx/xmleohlp.hxx>
#include <sfx2/docfile.hxx>
#include <sfx2/docfilt.hxx>
#include <sfx2/frame.hxx>
#include <sfx2/printer.hxx>
#include <xmloff/xmluconv.hxx>
#include <unotools/saveopt.hxx>
#include <unotools/streamwrap.hxx>
#include <tools/helpers.hxx>
#include <tools/diagnose_ex.h>
#include <vcl/svapp.hxx>
#include <unotxdoc.hxx>
#include <numrule.hxx>
#include <xmloff/xmlmetai.hxx>
#include <xmloff/xformsimport.hxx>
#include <comphelper/servicehelper.hxx>
#include <comphelper/processfactory.hxx>
#include <comphelper/propertysequence.hxx>
#include <unordered_set>
using namespace ::com::sun::star;
using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::text;
using namespace ::com::sun::star::lang;
using namespace ::com::sun::star::beans;
using namespace ::com::sun::star::container;
using namespace ::com::sun::star::i18n;
using namespace ::com::sun::star::drawing;
using namespace ::com::sun::star::xforms;
using namespace ::xmloff::token;
using namespace ::std;
enum SwXMLDocTokens
{
XML_TOK_DOC_FONTDECLS,
XML_TOK_DOC_STYLES,
XML_TOK_DOC_AUTOSTYLES,
XML_TOK_DOC_MASTERSTYLES,
XML_TOK_DOC_META,
XML_TOK_DOC_BODY,
XML_TOK_DOC_SCRIPT,
XML_TOK_DOC_SETTINGS,
XML_TOK_DOC_XFORMS,
};
static const SvXMLTokenMapEntry aDocTokenMap[] =
{
{ XML_NAMESPACE_OFFICE, XML_FONT_FACE_DECLS, XML_TOK_DOC_FONTDECLS },
{ XML_NAMESPACE_OFFICE, XML_STYLES, XML_TOK_DOC_STYLES },
{ XML_NAMESPACE_OFFICE, XML_AUTOMATIC_STYLES, XML_TOK_DOC_AUTOSTYLES },
{ XML_NAMESPACE_OFFICE, XML_MASTER_STYLES, XML_TOK_DOC_MASTERSTYLES },
{ XML_NAMESPACE_OFFICE, XML_META, XML_TOK_DOC_META },
{ XML_NAMESPACE_OFFICE, XML_BODY, XML_TOK_DOC_BODY },
{ XML_NAMESPACE_OFFICE, XML_SCRIPTS, XML_TOK_DOC_SCRIPT },
{ XML_NAMESPACE_OFFICE, XML_SETTINGS, XML_TOK_DOC_SETTINGS },
{ XML_NAMESPACE_XFORMS, XML_MODEL, XML_TOK_DOC_XFORMS },
XML_TOKEN_MAP_END
};
class SwXMLBodyContext_Impl : public SvXMLImportContext
{
SwXMLImport& GetSwImport() { return static_cast<SwXMLImport&>(GetImport()); }
public:
SwXMLBodyContext_Impl( SwXMLImport& rImport, sal_uInt16 nPrfx,
const OUString& rLName );
virtual SvXMLImportContextRef CreateChildContext( sal_uInt16 nPrefix,
const OUString& rLocalName,
const Reference< xml::sax::XAttributeList > & xAttrList ) override;
};
SwXMLBodyContext_Impl::SwXMLBodyContext_Impl( SwXMLImport& rImport,
sal_uInt16 nPrfx, const OUString& rLName) :
SvXMLImportContext( rImport, nPrfx, rLName )
{
// tdf#107211: if at this point we don't have a defined char style "Default"
// or "Default Style", add a mapping for it as it is not written
// into the file since it's not really a style but "no style"
// (hence referencing it actually makes no sense except for hyperlinks
// which default to something other than "Default")
OUString const sDefault(SwResId(STR_POOLCOLL_STANDARD));
uno::Reference<container::XNameContainer> const& xStyles(
rImport.GetTextImport()->GetTextStyles());
if (!xStyles->hasByName("Default"))
{ // this old name was used before LO 4.0
rImport.AddStyleDisplayName(XML_STYLE_FAMILY_TEXT_TEXT, "Default", sDefault);
}
if (!xStyles->hasByName("Default_20_Style"))
{ // this new name contains a space which is converted to _20_ on export
rImport.AddStyleDisplayName(XML_STYLE_FAMILY_TEXT_TEXT, "Default_20_Style", sDefault);
}
bool isEncoded(false);
OUString const defaultEncoded(
rImport.GetMM100UnitConverter().encodeStyleName(sDefault, &isEncoded));
if (isEncoded && defaultEncoded != "Default_20_Style"
&& !xStyles->hasByName(defaultEncoded))
{ // new name may contain a space which is converted to _20_ on export
rImport.AddStyleDisplayName(XML_STYLE_FAMILY_TEXT_TEXT, defaultEncoded, sDefault);
}
}
SvXMLImportContextRef SwXMLBodyContext_Impl::CreateChildContext(
sal_uInt16 /*nPrefix*/,
const OUString& rLocalName,
const Reference< xml::sax::XAttributeList > & /*xAttrList*/ )
{
return GetSwImport().CreateBodyContentContext( rLocalName );
}
// #i69629#
// enhance class <SwXMLDocContext_Impl> in order to be able to create subclasses
// NB: virtually inherit so we can multiply inherit properly
// in SwXMLOfficeDocContext_Impl
class SwXMLDocContext_Impl : public virtual SvXMLImportContext
{
protected: // #i69629#
SwXMLImport& GetSwImport() { return static_cast<SwXMLImport&>(GetImport()); }
public:
SwXMLDocContext_Impl( SwXMLImport& rImport, sal_uInt16 nPrfx,
const OUString& rLName );
SwXMLDocContext_Impl( SwXMLImport& rImport );
virtual SvXMLImportContextRef CreateChildContext( sal_uInt16 nPrefix,
const OUString& rLocalName,
const Reference< xml::sax::XAttributeList > & xAttrList ) override;
virtual css::uno::Reference< css::xml::sax::XFastContextHandler > SAL_CALL createFastChildContext(
sal_Int32 nElement, const css::uno::Reference< css::xml::sax::XFastAttributeList >& xAttrList ) override;
};
SwXMLDocContext_Impl::SwXMLDocContext_Impl( SwXMLImport& rImport,
sal_uInt16 nPrfx, const OUString& rLName ) :
SvXMLImportContext( rImport, nPrfx, rLName )
{
}
SwXMLDocContext_Impl::SwXMLDocContext_Impl( SwXMLImport& rImport ) :
SvXMLImportContext( rImport )
{
}
uno::Reference< xml::sax::XFastContextHandler > SAL_CALL SwXMLDocContext_Impl::createFastChildContext(
sal_Int32 /*nElement*/, const uno::Reference< xml::sax::XFastAttributeList >& /*xAttrList*/ )
{
return new SvXMLImportContext( GetImport() );
}
SvXMLImportContextRef SwXMLDocContext_Impl::CreateChildContext(
sal_uInt16 nPrefix,
const OUString& rLocalName,
const Reference< xml::sax::XAttributeList > & xAttrList )
{
SvXMLImportContext *pContext = nullptr;
const SvXMLTokenMap& rTokenMap = GetSwImport().GetDocElemTokenMap();
switch( rTokenMap.Get( nPrefix, rLocalName ) )
{
case XML_TOK_DOC_FONTDECLS:
pContext = GetSwImport().CreateFontDeclsContext( rLocalName,
xAttrList );
break;
case XML_TOK_DOC_STYLES:
GetSwImport().GetProgressBarHelper()->Increment( PROGRESS_BAR_STEP );
pContext = GetSwImport().CreateStylesContext( rLocalName, xAttrList,
false );
break;
case XML_TOK_DOC_AUTOSTYLES:
// don't use the autostyles from the styles-document for the progress
if ( ! IsXMLToken( GetLocalName(), XML_DOCUMENT_STYLES ) )
GetSwImport().GetProgressBarHelper()->Increment
( PROGRESS_BAR_STEP );
pContext = GetSwImport().CreateStylesContext( rLocalName, xAttrList,
true );
break;
case XML_TOK_DOC_MASTERSTYLES:
pContext = GetSwImport().CreateMasterStylesContext( rLocalName,
xAttrList );
break;
case XML_TOK_DOC_META:
OSL_FAIL("XML_TOK_DOC_META: should not have come here, maybe document is invalid?");
break;
case XML_TOK_DOC_SCRIPT:
pContext = GetSwImport().CreateScriptContext( rLocalName );
break;
case XML_TOK_DOC_BODY:
GetSwImport().GetProgressBarHelper()->Increment( PROGRESS_BAR_STEP );
pContext = new SwXMLBodyContext_Impl( GetSwImport(), nPrefix,
rLocalName );
break;
case XML_TOK_DOC_SETTINGS:
pContext = new XMLDocumentSettingsContext( GetImport(), nPrefix, rLocalName, xAttrList );
break;
case XML_TOK_DOC_XFORMS:
pContext = createXFormsModelContext(GetImport(), nPrefix, rLocalName);
break;
}
if( !pContext )
pContext = new SvXMLImportContext( GetImport(), nPrefix, rLocalName );
return pContext;
}
// #i69629# - new subclass <SwXMLOfficeDocContext_Impl> of class <SwXMLDocContext_Impl>
class SwXMLOfficeDocContext_Impl :
public SwXMLDocContext_Impl, public SvXMLMetaDocumentContext
{
public:
SwXMLOfficeDocContext_Impl( SwXMLImport& rImport,
const Reference< document::XDocumentProperties >& xDocProps);
virtual css::uno::Reference< css::xml::sax::XFastContextHandler > SAL_CALL createFastChildContext(
sal_Int32 nElement, const css::uno::Reference< css::xml::sax::XFastAttributeList >& Attribs ) override;
};
SwXMLOfficeDocContext_Impl::SwXMLOfficeDocContext_Impl(
SwXMLImport& rImport,
const Reference< document::XDocumentProperties >& xDocProps) :
SvXMLImportContext( rImport ),
SwXMLDocContext_Impl( rImport ),
SvXMLMetaDocumentContext( rImport, xDocProps )
{
}
uno::Reference< xml::sax::XFastContextHandler > SAL_CALL SwXMLOfficeDocContext_Impl::createFastChildContext(
sal_Int32 nElement, const uno::Reference< xml::sax::XFastAttributeList >& xAttrList )
{
// assign paragraph styles to list levels of outline style after all styles
// are imported and finished. This is the case, when <office:body> starts
// in flat OpenDocument file format.
{
if( nElement == XML_ELEMENT( OFFICE, XML_BODY ) )
{
GetImport().GetTextImport()->SetOutlineStyles( true );
}
}
// behave like meta base class iff we encounter office:meta
if ( nElement == XML_ELEMENT( OFFICE, XML_META ) ) {
return SvXMLMetaDocumentContext::createFastChildContext(
nElement, xAttrList );
} else {
return SwXMLDocContext_Impl::createFastChildContext(
nElement, xAttrList );
}
}
// #i69629# - new subclass <SwXMLDocStylesContext_Impl> of class <SwXMLDocContext_Impl>
class SwXMLDocStylesContext_Impl : public SwXMLDocContext_Impl
{
public:
SwXMLDocStylesContext_Impl( SwXMLImport& rImport,
sal_uInt16 nPrfx,
const OUString& rLName );
virtual void EndElement() override;
};
SwXMLDocStylesContext_Impl::SwXMLDocStylesContext_Impl(
SwXMLImport& rImport,
sal_uInt16 nPrfx,
const OUString& rLName ) :
SvXMLImportContext( rImport, nPrfx, rLName ),
SwXMLDocContext_Impl( rImport, nPrfx, rLName )
{
}
void SwXMLDocStylesContext_Impl::EndElement()
{
// assign paragraph styles to list levels of outline style after all styles
// are imported and finished.
SwXMLImport& rSwImport = dynamic_cast<SwXMLImport&>( GetImport());
GetImport().GetTextImport()->SetOutlineStyles(
bool(rSwImport.GetStyleFamilyMask() & SfxStyleFamily::Para));
}
const SvXMLTokenMap& SwXMLImport::GetDocElemTokenMap()
{
if( !m_pDocElemTokenMap )
m_pDocElemTokenMap.reset( new SvXMLTokenMap( aDocTokenMap ) );
return *m_pDocElemTokenMap;
}
SvXMLImportContext *SwXMLImport::CreateDocumentContext(
sal_uInt16 nPrefix,
const OUString& rLocalName,
const Reference< xml::sax::XAttributeList > & xAttrList )
{
SvXMLImportContext *pContext = nullptr;
// #i69629# - own subclasses for <office:document> and <office:document-styles>
if( XML_NAMESPACE_OFFICE==nPrefix &&
( IsXMLToken( rLocalName, XML_DOCUMENT_SETTINGS ) ||
IsXMLToken( rLocalName, XML_DOCUMENT_CONTENT ) ))
pContext = new SwXMLDocContext_Impl( *this, nPrefix, rLocalName );
else if ( XML_NAMESPACE_OFFICE==nPrefix &&
IsXMLToken( rLocalName, XML_DOCUMENT_STYLES ) )
{
pContext = new SwXMLDocStylesContext_Impl( *this, nPrefix, rLocalName );
}
else
pContext = SvXMLImport::CreateDocumentContext(nPrefix, rLocalName, xAttrList);
return pContext;
}
SvXMLImportContext *SwXMLImport::CreateFastContext( sal_Int32 nElement,
const uno::Reference< xml::sax::XFastAttributeList >& /*xAttrList*/ )
{
SvXMLImportContext *pContext = nullptr;
switch (nElement)
{
case XML_ELEMENT( OFFICE, XML_DOCUMENT_META ):
pContext = CreateMetaContext(nElement);
break;
case XML_ELEMENT( OFFICE, XML_DOCUMENT ):
{
uno::Reference<document::XDocumentProperties> const xDocProps(
GetDocumentProperties());
// flat OpenDocument file format
pContext = new SwXMLOfficeDocContext_Impl( *this, xDocProps );
}
break;
default:
pContext = new SvXMLImportContext( *this );
}
return pContext;
}
SwXMLImport::SwXMLImport(
const uno::Reference< uno::XComponentContext >& rContext,
OUString const & implementationName, SvXMLImportFlags nImportFlags)
: SvXMLImport( rContext, implementationName, nImportFlags ),
m_nStyleFamilyMask( SfxStyleFamily::All ),
m_bLoadDoc( true ),
m_bInsert( false ),
m_bBlock( false ),
m_bOrganizerMode( false ),
m_bInititedXForms( false ),
m_pDoc( nullptr )
{
InitItemImport();
}
SwXMLImport::~SwXMLImport() throw ()
{
if (HasShapeImport())
{
SAL_WARN("sw", "endDocument skipped, dropping shapes now to avoid dangling SvTextShapeImportHelper pointing to this");
ClearShapeImport();
}
m_pDocElemTokenMap.reset();
m_pTableElemTokenMap.reset();
m_pTableCellAttrTokenMap.reset();
FinitItemImport();
}
void SwXMLImport::setTextInsertMode(
const Reference< XTextRange > & rInsertPos )
{
m_bInsert = true;
Reference < XText > xText = rInsertPos->getText();
Reference < XTextCursor > xTextCursor =
xText->createTextCursorByRange( rInsertPos );
GetTextImport()->SetCursor( xTextCursor );
}
void SwXMLImport::setStyleInsertMode( SfxStyleFamily nFamilies,
bool bOverwrite )
{
m_bInsert = !bOverwrite;
m_nStyleFamilyMask = nFamilies;
m_bLoadDoc = false;
}
namespace
{
class theSwXMLImportUnoTunnelId : public rtl::Static< UnoTunnelIdInit, theSwXMLImportUnoTunnelId > {};
}
const Sequence< sal_Int8 > & SwXMLImport::getUnoTunnelId() throw()
{
return theSwXMLImportUnoTunnelId::get().getSeq();
}
sal_Int64 SAL_CALL SwXMLImport::getSomething( const Sequence< sal_Int8 >& rId )
{
if( rId.getLength() == 16
&& 0 == memcmp( getUnoTunnelId().getConstArray(),
rId.getConstArray(), 16 ) )
{
return sal::static_int_cast< sal_Int64 >( reinterpret_cast< sal_IntPtr >(this) );
}
return SvXMLImport::getSomething( rId );
}
static OTextCursorHelper *lcl_xml_GetSwXTextCursor( const Reference < XTextCursor >& rTextCursor )
{
Reference<XUnoTunnel> xCursorTunnel( rTextCursor, UNO_QUERY );
OSL_ENSURE( xCursorTunnel.is(), "missing XUnoTunnel for Cursor" );
if( !xCursorTunnel.is() )
return nullptr;
OTextCursorHelper *pTextCursor = reinterpret_cast< OTextCursorHelper *>(
sal::static_int_cast< sal_IntPtr >( xCursorTunnel->getSomething( OTextCursorHelper::getUnoTunnelId() )));
OSL_ENSURE( pTextCursor, "SwXTextCursor missing" );
return pTextCursor;
}
void SwXMLImport::startDocument()
{
// delegate to parent
SvXMLImport::startDocument();
OSL_ENSURE( GetModel().is(), "model is missing" );
if( !GetModel().is() )
return;
// this method will modify the document directly -> lock SolarMutex
SolarMutexGuard aGuard;
Reference< XPropertySet > xImportInfo( getImportInfo() );
Reference< XPropertySetInfo > xPropertySetInfo;
if( xImportInfo.is() )
xPropertySetInfo = xImportInfo->getPropertySetInfo();
if( xPropertySetInfo.is() )
{
Any aAny;
// insert style mode?
OUString sStyleInsertModeFamilies("StyleInsertModeFamilies");
if( xPropertySetInfo->hasPropertyByName(sStyleInsertModeFamilies) )
{
aAny = xImportInfo->getPropertyValue(sStyleInsertModeFamilies);
Sequence< OUString> aFamiliesSeq;
if( aAny >>= aFamiliesSeq )
{
SfxStyleFamily nFamilyMask = SfxStyleFamily::None;
sal_Int32 nCount = aFamiliesSeq.getLength();
const OUString *pSeq = aFamiliesSeq.getConstArray();
for( sal_Int32 i=0; i < nCount; i++ )
{
const OUString& rFamily = pSeq[i];
if( rFamily=="FrameStyles" )
nFamilyMask |= SfxStyleFamily::Frame;
else if( rFamily=="PageStyles" )
nFamilyMask |= SfxStyleFamily::Page;
else if( rFamily=="CharacterStyles" )
nFamilyMask |= SfxStyleFamily::Char;
else if( rFamily=="ParagraphStyles" )
nFamilyMask |= SfxStyleFamily::Para;
else if( rFamily=="NumberingStyles" )
nFamilyMask |= SfxStyleFamily::Pseudo;
}
bool bOverwrite = false;
const OUString sStyleInsertModeOverwrite("StyleInsertModeOverwrite");
if( xPropertySetInfo->hasPropertyByName(sStyleInsertModeOverwrite) )
{
aAny = xImportInfo->getPropertyValue(sStyleInsertModeOverwrite);
if( auto b = o3tl::tryAccess<bool>(aAny) )
{
if( *b )
bOverwrite = true;
}
}
setStyleInsertMode( nFamilyMask, bOverwrite );
}
}
// text insert mode?
const OUString sTextInsertModeRange("TextInsertModeRange");
if( xPropertySetInfo->hasPropertyByName(sTextInsertModeRange) )
{
aAny = xImportInfo->getPropertyValue(sTextInsertModeRange);
Reference<XTextRange> xInsertTextRange;
if( aAny >>= xInsertTextRange )
setTextInsertMode( xInsertTextRange );
}
// auto text mode
const OUString sAutoTextMode("AutoTextMode");
if( xPropertySetInfo->hasPropertyByName(sAutoTextMode) )
{
aAny = xImportInfo->getPropertyValue(sAutoTextMode);
if( auto b = o3tl::tryAccess<bool>(aAny) )
{
if( *b )
m_bBlock = true;
}
}
// organizer mode
const OUString sOrganizerMode("OrganizerMode");
if( xPropertySetInfo->hasPropertyByName(sOrganizerMode) )
{
aAny = xImportInfo->getPropertyValue(sOrganizerMode);
if( auto b = o3tl::tryAccess<bool>(aAny) )
{
if( *b )
m_bOrganizerMode = true;
}
}
// default document properties
const OUString sDefSettings("DefaultDocumentSettings");
if (xPropertySetInfo->hasPropertyByName(sDefSettings))
{
aAny = xImportInfo->getPropertyValue(sDefSettings);
Sequence<PropertyValue> aProps;
if (aAny >>= aProps)
{
Reference<lang::XMultiServiceFactory> xFac(GetModel(), UNO_QUERY);
Reference<XPropertySet> xProps(
xFac->createInstance("com.sun.star.document.Settings"), UNO_QUERY);
Reference<XPropertySetInfo> xInfo(xProps->getPropertySetInfo());
if (xProps.is() && xInfo.is())
{
for (const auto& rProp : aProps)
{
if (xInfo->hasPropertyByName(rProp.Name))
{
xProps->setPropertyValue(rProp.Name, rProp.Value);
}
}
}
}
}
}
// There only is a text cursor by now if we are in insert mode. In any
// other case we have to create one at the start of the document.
// We also might change into the insert mode later, so we have to make
// sure to first set the insert mode and then create the text import
// helper. Otherwise it won't have the insert flag set!
OTextCursorHelper *pTextCursor = nullptr;
Reference < XTextCursor > xTextCursor;
if( HasTextImport() )
xTextCursor = GetTextImport()->GetCursor();
if( !xTextCursor.is() )
{
Reference < XTextDocument > xTextDoc( GetModel(), UNO_QUERY );
Reference < XText > xText = xTextDoc->getText();
xTextCursor = xText->createTextCursor();
SwCursorShell *pCursorSh = nullptr;
SwDoc *pDoc = nullptr;
if( SvXMLImportFlags::ALL == getImportFlags() )
{
pTextCursor = lcl_xml_GetSwXTextCursor( xTextCursor );
OSL_ENSURE( pTextCursor, "SwXTextCursor missing" );
if( !pTextCursor )
return;
pDoc = pTextCursor->GetDoc();
OSL_ENSURE( pDoc, "SwDoc missing" );
if( !pDoc )
return;
// Is there a edit shell. If yes, then we are currently inserting
// a document. We then have to insert at the current edit shell's
// cursor position. That not quite clean code, but there is no other
// way currently.
pCursorSh = pDoc->GetEditShell();
}
if( pCursorSh )
{
const uno::Reference<text::XTextRange> xInsertTextRange(
SwXTextRange::CreateXTextRange(
*pDoc, *pCursorSh->GetCursor()->GetPoint(), nullptr ) );
setTextInsertMode( xInsertTextRange );
xTextCursor = GetTextImport()->GetCursor();
pTextCursor = nullptr;
}
else
GetTextImport()->SetCursor( xTextCursor );
}
if( !(getImportFlags() & (SvXMLImportFlags::CONTENT|SvXMLImportFlags::MASTERSTYLES)) )
return;
if( !pTextCursor )
pTextCursor = lcl_xml_GetSwXTextCursor( xTextCursor );
OSL_ENSURE( pTextCursor, "SwXTextCursor missing" );
if( !pTextCursor )
return;
SwDoc *pDoc = pTextCursor->GetDoc();
OSL_ENSURE( pDoc, "SwDoc missing" );
if( !pDoc )
return;
if (SvXMLImportFlags::ALL == getImportFlags())
{
// for flat ODF - this is done in SwReader::Read() for package ODF
pDoc->SetInReading(true);
pDoc->SetInXMLImport(true);
}
if( (getImportFlags() & SvXMLImportFlags::CONTENT) && !IsStylesOnlyMode() )
{
m_pSttNdIdx.reset(new SwNodeIndex( pDoc->GetNodes() ));
if( IsInsertMode() )
{
SwPaM *pPaM = pTextCursor->GetPaM();
const SwPosition* pPos = pPaM->GetPoint();
// Split once and remember the node that has been splitted.
pDoc->getIDocumentContentOperations().SplitNode( *pPos, false );
*m_pSttNdIdx = pPos->nNode.GetIndex()-1;
// Split again.
pDoc->getIDocumentContentOperations().SplitNode( *pPos, false );
// Insert all content into the new node
pPaM->Move( fnMoveBackward );
pDoc->SetTextFormatColl
( *pPaM, pDoc->getIDocumentStylePoolAccess().GetTextCollFromPool(RES_POOLCOLL_STANDARD, false ) );
}
}
// We need a draw model to be able to set the z order
pDoc->getIDocumentDrawModelAccess().GetOrCreateDrawModel(); // #i52858# - method name changed
// SJ: #i49801# locking the model to disable repaints
SwDrawModel* pDrawModel = pDoc->getIDocumentDrawModelAccess().GetDrawModel();
if ( pDrawModel )
pDrawModel->setLock(true);
if (!GetGraphicStorageHandler().is())
{
m_xGraphicStorageHandler = SvXMLGraphicHelper::Create(SvXMLGraphicHelperMode::Read);
SetGraphicStorageHandler(m_xGraphicStorageHandler.get());
}
if( !GetEmbeddedResolver().is() )
{
SfxObjectShell *pPersist = pDoc->GetPersist();
if( pPersist )
{
m_xEmbeddedResolver = SvXMLEmbeddedObjectHelper::Create(
*pPersist,
SvXMLEmbeddedObjectHelperMode::Read );
Reference< document::XEmbeddedObjectResolver > xEmbeddedResolver( m_xEmbeddedResolver.get() );
SetEmbeddedResolver( xEmbeddedResolver );
}
}
}
void SwXMLImport::endDocument()
{
OSL_ENSURE( GetModel().is(), "model missing; maybe startDocument wasn't called?" );
if( !GetModel().is() )
return;
// this method will modify the document directly -> lock SolarMutex
SolarMutexGuard aGuard;
if (m_xGraphicStorageHandler)
m_xGraphicStorageHandler->dispose();
m_xGraphicStorageHandler.clear();
if( m_xEmbeddedResolver )
m_xEmbeddedResolver->dispose();
m_xEmbeddedResolver.clear();
// Clear the shape import to sort the shapes (and not in the
// destructor that might be called after the import has finished
// for Java filters.
if( HasShapeImport() )
ClearShapeImport();
SwDoc *pDoc = nullptr;
if( (getImportFlags() & SvXMLImportFlags::CONTENT) && !IsStylesOnlyMode() )
{
Reference<XUnoTunnel> xCursorTunnel( GetTextImport()->GetCursor(),
UNO_QUERY);
assert(xCursorTunnel.is() && "missing XUnoTunnel for Cursor");
OTextCursorHelper *pTextCursor = reinterpret_cast< OTextCursorHelper *>(
sal::static_int_cast< sal_IntPtr >( xCursorTunnel->getSomething( OTextCursorHelper::getUnoTunnelId() )));
assert(pTextCursor && "SwXTextCursor missing");
SwPaM *pPaM = pTextCursor->GetPaM();
if( IsInsertMode() && m_pSttNdIdx->GetIndex() )
{
// If we are in insert mode, join the splitted node that is in front
// of the new content with the first new node. Or in other words:
// Revert the first split node.
SwTextNode* pTextNode = m_pSttNdIdx->GetNode().GetTextNode();
SwNodeIndex aNxtIdx( *m_pSttNdIdx );
if( pTextNode && pTextNode->CanJoinNext( &aNxtIdx ) &&
m_pSttNdIdx->GetIndex() + 1 == aNxtIdx.GetIndex() )
{
// If the PaM points to the first new node, move the PaM to the
// end of the previous node.
if( pPaM->GetPoint()->nNode == aNxtIdx )
{
pPaM->GetPoint()->nNode = *m_pSttNdIdx;
pPaM->GetPoint()->nContent.Assign( pTextNode,
pTextNode->GetText().getLength());
}
#if OSL_DEBUG_LEVEL > 0
// !!! This should be impossible !!!!
OSL_ENSURE( m_pSttNdIdx->GetIndex()+1 !=
pPaM->GetBound().nNode.GetIndex(),
"PaM.Bound1 point to new node " );
OSL_ENSURE( m_pSttNdIdx->GetIndex()+1 !=
pPaM->GetBound( false ).nNode.GetIndex(),
"PaM.Bound2 points to new node" );
if( m_pSttNdIdx->GetIndex()+1 ==
pPaM->GetBound().nNode.GetIndex() )
{
const sal_Int32 nCntPos =
pPaM->GetBound().nContent.GetIndex();
pPaM->GetBound().nContent.Assign( pTextNode,
pTextNode->GetText().getLength() + nCntPos );
}
if( m_pSttNdIdx->GetIndex()+1 ==
pPaM->GetBound( false ).nNode.GetIndex() )
{
const sal_Int32 nCntPos =
pPaM->GetBound( false ).nContent.GetIndex();
pPaM->GetBound( false ).nContent.Assign( pTextNode,
pTextNode->GetText().getLength() + nCntPos );
}
#endif
// If the first new node isn't empty, convert the node's text
// attributes into hints. Otherwise, set the new node's
// paragraph style at the previous (empty) node.
SwTextNode* pDelNd = aNxtIdx.GetNode().GetTextNode();
if (!pTextNode->GetText().isEmpty())
pDelNd->FormatToTextAttr( pTextNode );
else
pTextNode->ChgFormatColl( pDelNd->GetTextColl() );
pTextNode->JoinNext();
}
}
SwPosition* pPos = pPaM->GetPoint();
OSL_ENSURE( !pPos->nContent.GetIndex(), "last paragraph isn't empty" );
if( !pPos->nContent.GetIndex() )
{
SwTextNode* pCurrNd;
sal_uLong nNodeIdx = pPos->nNode.GetIndex();
pDoc = pPaM->GetDoc();
OSL_ENSURE( pPos->nNode.GetNode().IsContentNode(),
"insert position is not a content node" );
if( !IsInsertMode() )
{
// If we're not in insert mode, the last node is deleted.
const SwNode *pPrev = pDoc->GetNodes()[nNodeIdx -1];
if( pPrev->IsContentNode() ||
( pPrev->IsEndNode() &&
pPrev->StartOfSectionNode()->IsSectionNode() ) )
{
SwContentNode* pCNd = pPaM->GetContentNode();
if( pCNd && pCNd->StartOfSectionIndex()+2 <
pCNd->EndOfSectionIndex() )
{
pPaM->GetBound().nContent.Assign( nullptr, 0 );
pPaM->GetBound(false).nContent.Assign( nullptr, 0 );
pDoc->GetNodes().Delete( pPaM->GetPoint()->nNode );
}
}
}
else if( nullptr != (pCurrNd = pDoc->GetNodes()[nNodeIdx]->GetTextNode()) )
{
// Id we're in insert mode, the empty node is joined with
// the next and the previous one.
if( pCurrNd->CanJoinNext( &pPos->nNode ))
{
SwTextNode* pNextNd = pPos->nNode.GetNode().GetTextNode();
pPos->nContent.Assign( pNextNd, 0 );
pPaM->SetMark(); pPaM->DeleteMark();
pNextNd->JoinPrev();
// Remove line break that has been inserted by the import,
// but only if one has been inserted!
if( pNextNd->CanJoinPrev(/* &pPos->nNode*/ ) &&
*m_pSttNdIdx != pPos->nNode )
{
pNextNd->JoinPrev();
}
}
else if (pCurrNd->GetText().isEmpty())
{
pPos->nContent.Assign( nullptr, 0 );
pPaM->SetMark(); pPaM->DeleteMark();
pDoc->GetNodes().Delete( pPos->nNode );
pPaM->Move( fnMoveBackward );
}
}
// tdf#113877
// when we insert one document with list inside into another one with list at the insert position,
// the resulting numbering in these lists is not consequent.
//
// Main document:
// 1. One
// 2. Two
// 3. Three
// 4. <-- insert position
//
// Inserted document:
// 1. One
// 2. Two
// 3. Three
// 4.
//
// Expected result
// 1. One
// 2. Two
// 3. Three
// 4. One
// 5. Two
// 6. Three
// 7.
//
MergeListsAtDocumentInsertPosition(pDoc);
}
}
/* Was called too early. Moved from SwXMLBodyContext_Impl::EndElement */
GetTextImport()->RedlineAdjustStartNodeCursor( false );
if( (getImportFlags() & SvXMLImportFlags::CONTENT) ||
((getImportFlags() & SvXMLImportFlags::MASTERSTYLES) && IsStylesOnlyMode()) )
{
// pDoc might be 0. In this case UpdateTextCollCondition is looking
// for it itself.
UpdateTextCollConditions( pDoc );
}
GetTextImport()->ResetCursor();
m_pSttNdIdx.reset();
// SJ: #i49801# -> now permitting repaints
if ( pDoc )
{
if( getImportFlags() == SvXMLImportFlags::ALL )
{
// Notify math objects. If we are in the package filter this will
// be done by the filter object itself
if( IsInsertMode() )
pDoc->PrtOLENotify( false );
else if ( pDoc->IsOLEPrtNotifyPending() )
pDoc->PrtOLENotify( true );
assert(pDoc->IsInReading());
assert(pDoc->IsInXMLImport());
pDoc->SetInReading(false);
pDoc->SetInXMLImport(false);
}
SwDrawModel* pDrawModel = pDoc->getIDocumentDrawModelAccess().GetDrawModel();
if ( pDrawModel )
pDrawModel->setLock(false);
}
// #i90243#
if ( m_bInititedXForms )
{
Reference< xforms::XFormsSupplier > xFormsSupp( GetModel(), UNO_QUERY );
Reference< XNameAccess > xXForms;
if ( xFormsSupp.is() )
xXForms = xFormsSupp->getXForms().get();
if ( xXForms.is() )
{
try
{
Sequence< beans::PropertyValue > aXFormsSettings;
const OUString& sXFormsSettingsName( GetXMLToken( XML_XFORM_MODEL_SETTINGS ) );
if ( m_xLateInitSettings.is() && m_xLateInitSettings->hasByName( sXFormsSettingsName ) )
{
OSL_VERIFY( m_xLateInitSettings->getByName( sXFormsSettingsName ) >>= aXFormsSettings );
applyXFormsSettings( xXForms, aXFormsSettings );
}
}
catch( const Exception& )
{
}
}
}
// delegate to parent: takes care of error handling
SvXMLImport::endDocument();
ClearTextImport();
}
// tdf#113877
// when we insert one document with list inside into another one with list at the insert position,
// the resulting numbering in these lists is not consequent.
//
// CASE-1: Main document:
// 1. One
// 2. Two
// 3. Three
// 4. <-- insert position
//
// Inserted document:
// 1. One
// 2. Two
// 3. Three
// 4.
//
// Expected result
// 1. One
// 2. Two
// 3. Three
// 4. One
// 5. Two
// 6. Three
// 7.
//
// CASE-2: Main document:
// 1. One
// 2. Two
// 3. Three
// 4. <-- insert position
//
// Inserted document:
// A) One
// B) Two
// C) Three
// D)
//
// Expected result
// 1. One
// 2. Two
// 3. Three
// 4. One
// A) Two
// B) Three
// 5.
//
void SwXMLImport::MergeListsAtDocumentInsertPosition(SwDoc *pDoc)
{
// 1. check environment
if (! pDoc)
return;
if (! IsInsertMode() || ! m_pSttNdIdx->GetIndex())
return;
sal_uLong index = 1;
// the last node of the main document where we have inserted a document
const SwNodePtr node1 = pDoc->GetNodes()[m_pSttNdIdx->GetIndex() + 0];
// the first node of the inserted document
SwNodePtr node2 = pDoc->GetNodes()[m_pSttNdIdx->GetIndex() + index];
if (! (node1 && node2
&& (node1->GetNodeType() == node2->GetNodeType())
&& (node1->IsTextNode() == node2->IsTextNode())
))
{
// not a text node at insert position
return;
}
// 2. get the first node of the inserted document,
// which will be used to detect if inside inserted document a new list was started after the first list
const SfxPoolItem* pListId2Initial = nullptr;
{
SwContentNode* contentNode1 = static_cast<SwContentNode *>(node1);
SwContentNode* contentNode2 = static_cast<SwContentNode *>(node2);
// check if both lists have the same list properties
const SfxPoolItem* pListId1 = contentNode1->GetNoCondAttr( RES_PARATR_LIST_ID, false );
const SfxPoolItem* pListId2 = contentNode2->GetNoCondAttr( RES_PARATR_LIST_ID, false );
if (! pListId1)
return;
if (! pListId2)
return;
const OUString& sListId1 = dynamic_cast<const SfxStringItem*>(pListId1)->GetValue();
const OUString& sListId2 = dynamic_cast<const SfxStringItem*>(pListId2)->GetValue();
const SwList* pList1 = pDoc->getIDocumentListsAccess().getListByName( sListId1 );
const SwList* pList2 = pDoc->getIDocumentListsAccess().getListByName( sListId2 );
if (! pList1)
return;
if (! pList2)
return;
const OUString& sDefaultListStyleName1 = pList1->GetDefaultListStyleName();
const OUString& sDefaultListStyleName2 = pList2->GetDefaultListStyleName();
if (sDefaultListStyleName1 != sDefaultListStyleName2)
{
const SwNumRule* pNumRule1 = pDoc->FindNumRulePtr( sDefaultListStyleName1 );
const SwNumRule* pNumRule2 = pDoc->FindNumRulePtr( sDefaultListStyleName2 );
if (pNumRule1 && pNumRule2)
{
// check style of the each list level
for( sal_uInt8 n = 0; n < MAXLEVEL; ++n )
{
if( !( pNumRule1->Get( n ) == pNumRule2->Get( n ) ))
{
return;
}
}
// our list should be merged
pListId2Initial = pListId2;
}
}
else
{
// our list should be merged
pListId2Initial = pListId2;
}
}
if (! pListId2Initial)
{
// two lists have different styles => they should not be merged
return;
}
// 3. merge two lists
while (
node1 && node2
&& (node1->GetNodeType() == node2->GetNodeType())
&& (node1->IsTextNode() == node2->IsTextNode())
)
{
SwContentNode* contentNode1 = static_cast<SwContentNode *>( node1 );
SwContentNode* contentNode2 = static_cast<SwContentNode *>( node2 );
const SfxPoolItem* pListId1 = contentNode1->GetNoCondAttr( RES_PARATR_LIST_ID, false );
const SfxPoolItem* pListId2 = contentNode2->GetNoCondAttr( RES_PARATR_LIST_ID, false );
if (! pListId1)
return;
if (! pListId2)
return;
if (*pListId2Initial != *pListId2)
{
// no more list items of the first list inside inserted document
return;
}
// set list style to this list element
contentNode2->SetAttr(*pListId1);
// get next item
index++;
if (index >= pDoc->GetNodes().Count())
{
// no more items
return;
}
node2 = pDoc->GetNodes()[m_pSttNdIdx->GetIndex() + index];
}
}
// Locally derive XMLTextShapeImportHelper, so we can take care of the
// form import This is Writer, but not text specific, so it should go
// here!
class SvTextShapeImportHelper : public XMLTextShapeImportHelper
{
// hold own reference form import helper, because the SvxImport
// stored in the superclass, from whom we originally got the
// reference, is already destroyed when we want to use it in the
// destructor
rtl::Reference< ::xmloff::OFormLayerXMLImport > rFormImport;
// hold reference to the one page (if it exists) for calling startPage()
// and endPage. If !xPage.is(), then this document doesn't have a
// XDrawPage.
Reference<drawing::XDrawPage> xPage;
public:
explicit SvTextShapeImportHelper(SvXMLImport& rImp);
virtual ~SvTextShapeImportHelper() override;
};
SvTextShapeImportHelper::SvTextShapeImportHelper(SvXMLImport& rImp) :
XMLTextShapeImportHelper(rImp)
{
Reference<drawing::XDrawPageSupplier> xSupplier(rImp.GetModel(),UNO_QUERY);
if (xSupplier.is())
{
if (rImp.GetFormImport().is())
{
rImp.GetFormImport()->startPage(xSupplier->getDrawPage());
rFormImport = rImp.GetFormImport();
}
xPage = xSupplier->getDrawPage();
Reference<XShapes> xShapes( xPage, UNO_QUERY );
XMLShapeImportHelper::startPage( xShapes );
}
}
SvTextShapeImportHelper::~SvTextShapeImportHelper()
{
rFormImport->endPage();
if (xPage.is())
{
Reference<XShapes> xShapes( xPage, UNO_QUERY );
XMLShapeImportHelper::endPage(xShapes);
}
}
XMLTextImportHelper* SwXMLImport::CreateTextImport()
{
return new SwXMLTextImportHelper( GetModel(), *this, getImportInfo(),
IsInsertMode(),
IsStylesOnlyMode(),
IsBlockMode(), m_bOrganizerMode );
}
XMLShapeImportHelper* SwXMLImport::CreateShapeImport()
{
return new SvTextShapeImportHelper( *this );
}
SvXMLImportContext *SwXMLImport::CreateFontDeclsContext(
const OUString& rLocalName,
const Reference< xml::sax::XAttributeList > & xAttrList )
{
XMLFontStylesContext *pFSContext =
new XMLFontStylesContext( *this, XML_NAMESPACE_OFFICE,
rLocalName, xAttrList,
osl_getThreadTextEncoding() );
SetFontDecls( pFSContext );
return pFSContext;
}
void SwXMLImport::SetViewSettings(const Sequence < PropertyValue > & aViewProps)
{
if (IsInsertMode() || IsStylesOnlyMode() || IsBlockMode() || m_bOrganizerMode || !GetModel().is() )
return;
// this method will modify the document directly -> lock SolarMutex
SolarMutexGuard aGuard;
SwDoc *pDoc = getDoc();
tools::Rectangle aRect;
if( pDoc->GetDocShell() )
aRect = pDoc->GetDocShell()->GetVisArea( ASPECT_CONTENT );
//TODO/LATER: why that cast?!
//aRect = ((SfxInPlaceObject *)pDoc->GetDocShell())->GetVisArea();
sal_Int32 nCount = aViewProps.getLength();
const PropertyValue *pValue = aViewProps.getConstArray();
sal_Int64 nTmp = 0;
bool bShowRedlineChanges = false, bBrowseMode = false;
bool bChangeShowRedline = false, bChangeBrowseMode = false;
//TODO/LATER: why that cast?!
bool bTwip = pDoc->GetDocShell()->GetMapUnit ( ) == MapUnit::MapTwip;
//sal_Bool bTwip = pDoc->GetDocShell()->SfxInPlaceObject::GetMapUnit ( ) == MapUnit::MapTwip;
for (sal_Int32 i = 0; i < nCount ; i++)
{
if ( pValue->Name == "ViewAreaTop" )
{
pValue->Value >>= nTmp;
aRect.setY( static_cast< long >(bTwip ? sanitiseMm100ToTwip(nTmp) : nTmp) );
}
else if ( pValue->Name == "ViewAreaLeft" )
{
pValue->Value >>= nTmp;
aRect.setX( static_cast< long >(bTwip ? sanitiseMm100ToTwip(nTmp) : nTmp) );
}
else if ( pValue->Name == "ViewAreaWidth" )
{
pValue->Value >>= nTmp;
Size aSize( aRect.GetSize() );
aSize.setWidth( static_cast< long >(bTwip ? sanitiseMm100ToTwip(nTmp) : nTmp) );
aRect.SetSize( aSize );
}
else if ( pValue->Name == "ViewAreaHeight" )
{
pValue->Value >>= nTmp;
Size aSize( aRect.GetSize() );
aSize.setHeight( static_cast< long >(bTwip ? sanitiseMm100ToTwip(nTmp) : nTmp) );
aRect.SetSize( aSize );
}
else if ( pValue->Name == "ShowRedlineChanges" )
{
bShowRedlineChanges = *o3tl::doAccess<bool>(pValue->Value);
bChangeShowRedline = true;
}
// Headers and footers are not displayed in BrowseView anymore
else if ( pValue->Name == "InBrowseMode" )
{
bBrowseMode = *o3tl::doAccess<bool>(pValue->Value);
bChangeBrowseMode = true;
}
pValue++;
}
if( pDoc->GetDocShell() )
pDoc->GetDocShell()->SetVisArea ( aRect );
if (bChangeBrowseMode)
pDoc->getIDocumentSettingAccess().set(DocumentSettingId::BROWSE_MODE, bBrowseMode );
if (bChangeShowRedline)
GetTextImport()->SetShowChanges( bShowRedlineChanges );
}
// Note: this will be called only if there are OOo elements in settings.xml.
// So if a setting is missing there we can assume that it was written
// by an OOo/LO version that is older than the introduction of the setting!
void SwXMLImport::SetConfigurationSettings(const Sequence < PropertyValue > & aConfigProps)
{
// this method will modify the document directly -> lock SolarMutex
SolarMutexGuard aGuard;
Reference< lang::XMultiServiceFactory > xFac( GetModel(), UNO_QUERY );
if( !xFac.is() )
return;
Reference< XPropertySet > xProps( xFac->createInstance("com.sun.star.document.Settings"), UNO_QUERY );
if( !xProps.is() )
return;
Reference< XPropertySetInfo > xInfo( xProps->getPropertySetInfo() );
if( !xInfo.is() )
return;
std::unordered_set< OUString > aExcludeAlways;
aExcludeAlways.insert("LinkUpdateMode");
std::unordered_set< OUString > aExcludeWhenNotLoadingUserSettings;
aExcludeWhenNotLoadingUserSettings.insert("ForbiddenCharacters");
aExcludeWhenNotLoadingUserSettings.insert("IsKernAsianPunctuation");
aExcludeWhenNotLoadingUserSettings.insert("CharacterCompressionType");
aExcludeWhenNotLoadingUserSettings.insert("FieldAutoUpdate");
aExcludeWhenNotLoadingUserSettings.insert("ChartAutoUpdate");
aExcludeWhenNotLoadingUserSettings.insert("AddParaTableSpacing");
aExcludeWhenNotLoadingUserSettings.insert("AddParaTableSpacingAtStart");
aExcludeWhenNotLoadingUserSettings.insert("PrintAnnotationMode");
aExcludeWhenNotLoadingUserSettings.insert("PrintBlackFonts");
aExcludeWhenNotLoadingUserSettings.insert("PrintControls");
aExcludeWhenNotLoadingUserSettings.insert("PrintDrawings");
aExcludeWhenNotLoadingUserSettings.insert("PrintGraphics");
aExcludeWhenNotLoadingUserSettings.insert("PrintLeftPages");
aExcludeWhenNotLoadingUserSettings.insert("PrintPageBackground");
aExcludeWhenNotLoadingUserSettings.insert("PrintProspect");
aExcludeWhenNotLoadingUserSettings.insert("PrintReversed");
aExcludeWhenNotLoadingUserSettings.insert("PrintRightPages");
aExcludeWhenNotLoadingUserSettings.insert("PrintFaxName");
aExcludeWhenNotLoadingUserSettings.insert("PrintPaperFromSetup");
aExcludeWhenNotLoadingUserSettings.insert("PrintTables");
aExcludeWhenNotLoadingUserSettings.insert("PrintSingleJobs");
aExcludeWhenNotLoadingUserSettings.insert("UpdateFromTemplate");
aExcludeWhenNotLoadingUserSettings.insert("PrinterIndependentLayout");
aExcludeWhenNotLoadingUserSettings.insert("PrintEmptyPages");
aExcludeWhenNotLoadingUserSettings.insert("SmallCapsPercentage66");
aExcludeWhenNotLoadingUserSettings.insert("TabOverflow");
aExcludeWhenNotLoadingUserSettings.insert("UnbreakableNumberings");
aExcludeWhenNotLoadingUserSettings.insert("ClippedPictures");
aExcludeWhenNotLoadingUserSettings.insert("BackgroundParaOverDrawings");
aExcludeWhenNotLoadingUserSettings.insert("TabOverMargin");
aExcludeWhenNotLoadingUserSettings.insert("PropLineSpacingShrinksFirstLine");
aExcludeWhenNotLoadingUserSettings.insert("SubtractFlysAnchoredAtFlys");
aExcludeWhenNotLoadingUserSettings.insert("DisableOffPagePositioning");
sal_Int32 nCount = aConfigProps.getLength();
const PropertyValue* pValues = aConfigProps.getConstArray();
SvtSaveOptions aSaveOpt;
bool bIsUserSetting = aSaveOpt.IsLoadUserSettings();
// for some properties we don't want to use the application
// default if they're missing. So we watch for them in the loop
// below, and set them if not found
bool bPrinterIndependentLayout = false;
bool bUseOldNumbering = false;
bool bAddExternalLeading = false;
bool bAddParaSpacingToTableCells = false;
bool bUseFormerLineSpacing = false;
bool bUseFormerObjectPositioning = false;
bool bUseFormerTextWrapping = false;
bool bConsiderWrapOnObjPos = false;
bool bIgnoreFirstLineIndentInNumbering = false;
bool bDoNotJustifyLinesWithManualBreak = false;
bool bDoNotResetParaAttrsForNumFont = false;
bool bLoadReadonly = false;
bool bDoNotCaptureDrawObjsOnPage( false );
bool bClipAsCharacterAnchoredWriterFlyFrames( false );
bool bUnixForceZeroExtLeading = false;
bool bSmallCapsPercentage66 = false;
bool bTabOverflow = false;
bool bUnbreakableNumberings = false;
bool bClippedPictures = false;
bool bBackgroundParaOverDrawings = false;
bool bTabOverMargin = false;
bool bPropLineSpacingShrinksFirstLine = false;
bool bSubtractFlysAnchoredAtFlys = false;
bool bDisableOffPagePositioning = false;
const PropertyValue* currentDatabaseDataSource = nullptr;
const PropertyValue* currentDatabaseCommand = nullptr;
const PropertyValue* currentDatabaseCommandType = nullptr;
const PropertyValue* embeddedDatabaseName = nullptr;
while( nCount-- )
{
bool bSet = aExcludeAlways.find(pValues->Name) == aExcludeAlways.end();
if( bSet && !bIsUserSetting
&& (aExcludeWhenNotLoadingUserSettings.find(pValues->Name)
!= aExcludeWhenNotLoadingUserSettings.end()) )
{
bSet = false;
}
if( bSet )
{
try
{
if( xInfo->hasPropertyByName( pValues->Name ) )
{
if( pValues->Name == "RedlineProtectionKey" )
{
Sequence<sal_Int8> aKey;
pValues->Value >>= aKey;
GetTextImport()->SetChangesProtectionKey( aKey );
}
else
{
// HACK: Setting these out of order does not work.
if( pValues->Name == "CurrentDatabaseDataSource" )
currentDatabaseDataSource = pValues;
else if( pValues->Name == "CurrentDatabaseCommand" )
currentDatabaseCommand = pValues;
else if( pValues->Name == "CurrentDatabaseCommandType" )
currentDatabaseCommandType = pValues;
else if (pValues->Name == "EmbeddedDatabaseName")
embeddedDatabaseName = pValues;
else
xProps->setPropertyValue( pValues->Name,
pValues->Value );
}
}
// did we find any of the non-default cases?
if ( pValues->Name == "PrinterIndependentLayout" )
bPrinterIndependentLayout = true;
else if ( pValues->Name == "AddExternalLeading" )
bAddExternalLeading = true;
else if ( pValues->Name == "AddParaSpacingToTableCells" )
bAddParaSpacingToTableCells = true;
else if ( pValues->Name == "UseFormerLineSpacing" )
bUseFormerLineSpacing = true;
else if ( pValues->Name == "UseFormerObjectPositioning" )
bUseFormerObjectPositioning = true;
else if ( pValues->Name == "UseFormerTextWrapping" )
bUseFormerTextWrapping = true;
else if ( pValues->Name == "UseOldNumbering" )
bUseOldNumbering = true;
else if ( pValues->Name == "ConsiderTextWrapOnObjPos" )
bConsiderWrapOnObjPos = true;
else if ( pValues->Name == "IgnoreFirstLineIndentInNumbering" )
bIgnoreFirstLineIndentInNumbering = true;
else if ( pValues->Name == "DoNotJustifyLinesWithManualBreak" )
bDoNotJustifyLinesWithManualBreak = true;
else if ( pValues->Name == "DoNotResetParaAttrsForNumFont" )
bDoNotResetParaAttrsForNumFont = true;
else if ( pValues->Name == "LoadReadonly" )
bLoadReadonly = true;
else if ( pValues->Name == "DoNotCaptureDrawObjsOnPage" )
bDoNotCaptureDrawObjsOnPage = true;
else if ( pValues->Name == "ClipAsCharacterAnchoredWriterFlyFrames" )
bClipAsCharacterAnchoredWriterFlyFrames = true;
else if ( pValues->Name == "UnxForceZeroExtLeading" )
bUnixForceZeroExtLeading = true;
else if ( pValues->Name == "SmallCapsPercentage66" )
bSmallCapsPercentage66 = true;
else if ( pValues->Name == "TabOverflow" )
bTabOverflow = true;
else if ( pValues->Name == "UnbreakableNumberings" )
bUnbreakableNumberings = true;
else if ( pValues->Name == "ClippedPictures" )
bClippedPictures = true;
else if ( pValues->Name == "BackgroundParaOverDrawings" )
bBackgroundParaOverDrawings = true;
else if ( pValues->Name == "TabOverMargin" )
bTabOverMargin = true;
else if ( pValues->Name == "PropLineSpacingShrinksFirstLine" )
bPropLineSpacingShrinksFirstLine = true;
else if (pValues->Name == "SubtractFlysAnchoredAtFlys")
bSubtractFlysAnchoredAtFlys = true;
else if (pValues->Name == "DisableOffPagePositioning")
bDisableOffPagePositioning = true;
}
catch( Exception& )
{
OSL_FAIL( "SwXMLImport::SetConfigurationSettings: Exception!" );
}
}
pValues++;
}
try
{
if( currentDatabaseDataSource != nullptr )
xProps->setPropertyValue( currentDatabaseDataSource->Name, currentDatabaseDataSource->Value );
if( currentDatabaseCommand != nullptr )
xProps->setPropertyValue( currentDatabaseCommand->Name, currentDatabaseCommand->Value );
if( currentDatabaseCommandType != nullptr )
xProps->setPropertyValue( currentDatabaseCommandType->Name, currentDatabaseCommandType->Value );
if (embeddedDatabaseName)
xProps->setPropertyValue(embeddedDatabaseName->Name, embeddedDatabaseName->Value);
} catch( Exception& )
{
OSL_FAIL( "SwXMLImport::SetConfigurationSettings: Exception!" );
}
// finally, treat the non-default cases
// introduce boolean, that indicates a document, written by version prior SO8.
const bool bDocumentPriorSO8 = !bConsiderWrapOnObjPos;
if( ! bPrinterIndependentLayout )
{
xProps->setPropertyValue( "PrinterIndependentLayout", Any(sal_Int16(document::PrinterIndependentLayout::DISABLED)) );
}
if( ! bAddExternalLeading )
{
xProps->setPropertyValue( "AddExternalLeading", makeAny( false ) );
}
if( ! bUseFormerLineSpacing )
{
xProps->setPropertyValue( "UseFormerLineSpacing", makeAny( true ) );
}
if( !bUseFormerObjectPositioning )
{
xProps->setPropertyValue( "UseFormerObjectPositioning", makeAny( true ) );
}
if( !bUseOldNumbering )
{
xProps->setPropertyValue( "UseOldNumbering", makeAny(true) );
}
if( !bAddParaSpacingToTableCells )
{
xProps->setPropertyValue( "AddParaSpacingToTableCells",
makeAny( false ) );
}
if( !bUseFormerTextWrapping )
{
xProps->setPropertyValue( "UseFormerTextWrapping", makeAny( true ) );
}
if( !bConsiderWrapOnObjPos )
{
xProps->setPropertyValue( "ConsiderTextWrapOnObjPos", makeAny( false ) );
}
// #i47448#
// For SO7pp4, part of the 'new numbering' stuff has been backported from
// SO8. Unfortunately, only part of it and by using the same compatibility option
// like in SO8. Therefore documents generated with SO7pp4, containing
// numbered paragraphs with first line indent differ between SO7pp4 and
// SO8. In order to fix this for SO8pp1, I introduce a new compatibility
// flag 'bIgnoreFirstLineIndentInNumbering'. This flag has to be set for all
// documents < SO8, but not for SO8. So if the property is not present, the
// flag will be set to 'true'. SO8 documents surely have the
// 'ConsiderWrapOnObjPos' property set (no matter if 'true' or 'false'),
// therefore the correct condition to set this flag is this:
if( !bIgnoreFirstLineIndentInNumbering && bDocumentPriorSO8 )
{
xProps->setPropertyValue( "IgnoreFirstLineIndentInNumbering",
makeAny( true ) );
}
// This flag has to be set for all documents < SO8
if ( !bDoNotJustifyLinesWithManualBreak && bDocumentPriorSO8 )
{
xProps->setPropertyValue( "DoNotJustifyLinesWithManualBreak",
makeAny( true ) );
}
// This flag has to be set for all documents < SO8
if ( !bDoNotResetParaAttrsForNumFont && bDocumentPriorSO8 )
{
xProps->setPropertyValue( "DoNotResetParaAttrsForNumFont",
makeAny( true ) );
}
if ( !bLoadReadonly )
{
xProps->setPropertyValue( "LoadReadonly", makeAny( false ) );
}
// This flag has to be set for all documents < SO8
if ( !bDoNotCaptureDrawObjsOnPage && bDocumentPriorSO8 )
{
xProps->setPropertyValue( "DoNotCaptureDrawObjsOnPage",
makeAny( true ) );
}
// This flag has to be set for all documents < SO8
if ( !bClipAsCharacterAnchoredWriterFlyFrames && bDocumentPriorSO8 )
{
xProps->setPropertyValue( "ClipAsCharacterAnchoredWriterFlyFrames",
makeAny( true ) );
}
if ( !bUnixForceZeroExtLeading )
{
xProps->setPropertyValue( "UnxForceZeroExtLeading", makeAny( true ) );
}
// Old LO versions had 66 as the value for small caps percentage, later changed to 80.
// In order to keep backwards compatibility, SmallCapsPercentage66 option is written to .odt
// files, and the default for new documents is 'false'. Files without this option
// are considered to be old files, so set the compatibility option too.
if ( !bSmallCapsPercentage66 )
{
xProps->setPropertyValue( "SmallCapsPercentage66", makeAny( true ) );
}
if ( !bTabOverflow )
{
xProps->setPropertyValue( "TabOverflow", makeAny( false ) );
}
if ( !bUnbreakableNumberings )
{
xProps->setPropertyValue( "UnbreakableNumberings", makeAny( false ) );
}
if ( !bClippedPictures )
{
xProps->setPropertyValue( "ClippedPictures", makeAny( false ) );
}
if ( !bBackgroundParaOverDrawings )
xProps->setPropertyValue("BackgroundParaOverDrawings", makeAny( false ) );
if ( !bTabOverMargin )
xProps->setPropertyValue("TabOverMargin", makeAny( false ) );
if (!bPropLineSpacingShrinksFirstLine)
xProps->setPropertyValue("PropLineSpacingShrinksFirstLine", makeAny(false));
if (!bSubtractFlysAnchoredAtFlys)
xProps->setPropertyValue("SubtractFlysAnchoredAtFlys", makeAny(true));
if ( bDisableOffPagePositioning )
xProps->setPropertyValue("DisableOffPagePositioning", makeAny(true));
SwDoc *pDoc = getDoc();
SfxPrinter *pPrinter = pDoc->getIDocumentDeviceAccess().getPrinter( false );
if( pPrinter )
{
// If the printer is known, then the OLE objects will
// already have correct sizes, and we don't have to call
// PrtOLENotify again. Otherwise we have to call it.
// The flag might be set from setting the printer, so it
// it is required to clear it.
pDoc->SetOLEPrtNotifyPending( !pPrinter->IsKnown() );
}
}
void SwXMLImport::SetDocumentSpecificSettings(
const OUString& _rSettingsGroupName,
const Sequence< PropertyValue>& _rSettings )
{
// the only doc-specific settings group we know so far are the XForms settings
if ( !IsXMLToken( _rSettingsGroupName, XML_XFORM_MODEL_SETTINGS ) )
return;
// preserve the settings for a later iteration - we are currently reading the settings.xml,
// the content.xml will be read later, by another instance of SwXMLImport
OSL_ENSURE( m_xLateInitSettings.is(), "SwXMLImport::SetDocumentSpecificSettings: no storage for those settings!" );
if ( !m_xLateInitSettings.is() )
return;
try
{
if ( m_xLateInitSettings->hasByName( _rSettingsGroupName ) )
{
m_xLateInitSettings->replaceByName( _rSettingsGroupName, makeAny( _rSettings ) );
OSL_FAIL( "SwXMLImport::SetDocumentSpecificSettings: already have settings for this model!" );
}
else
m_xLateInitSettings->insertByName( _rSettingsGroupName, makeAny( _rSettings ) );
}
catch( const Exception& )
{
}
}
void SwXMLImport::initialize(
const Sequence<Any>& aArguments )
{
// delegate to super class
SvXMLImport::initialize(aArguments);
// we are only looking for a NamedValue "LateInitSettings"
sal_Int32 nLength = aArguments.getLength();
for(sal_Int32 i = 0; i < nLength; i++)
{
beans::NamedValue aNamedValue;
if ( aArguments[i] >>= aNamedValue )
{
if (aNamedValue.Name == "LateInitSettings")
{
OSL_VERIFY( aNamedValue.Value >>= m_xLateInitSettings );
}
}
}
}
SwDoc* SwImport::GetDocFromXMLImport( SvXMLImport const & rImport )
{
uno::Reference<lang::XUnoTunnel> xModelTunnel( rImport.GetModel(), uno::UNO_QUERY );
SwXTextDocument *pTextDoc = reinterpret_cast< SwXTextDocument *>(
sal::static_int_cast< sal_IntPtr >( xModelTunnel->getSomething(SwXTextDocument::getUnoTunnelId() )));
assert( pTextDoc );
assert( pTextDoc->GetDocShell() );
SwDoc* pDoc = pTextDoc->GetDocShell()->GetDoc();
OSL_ENSURE( pDoc, "Where is my document?" );
return pDoc;
}
void SwXMLImport::initXForms()
{
// obtain SwDoc
Reference<XUnoTunnel> xDocTunnel( GetModel(), UNO_QUERY );
if( ! xDocTunnel.is() )
return;
SwXTextDocument* pXTextDocument = reinterpret_cast<SwXTextDocument*>(
xDocTunnel->getSomething( SwXTextDocument::getUnoTunnelId() ) );
if( pXTextDocument == nullptr )
return;
SwDoc *pDoc = pXTextDocument->GetDocShell()->GetDoc();
// init XForms (if not already done)
// (no default model, since we'll load the models)
if( ! pDoc->isXForms() )
pDoc->initXForms( false );
m_bInititedXForms = true;
}
SwDoc* SwXMLImport::getDoc()
{
if( m_pDoc != nullptr )
return m_pDoc;
Reference < XTextDocument > xTextDoc( GetModel(), UNO_QUERY );
Reference < XText > xText = xTextDoc->getText();
Reference<XUnoTunnel> xTextTunnel( xText, UNO_QUERY);
assert( xTextTunnel.is());
SwXText *pText = reinterpret_cast< SwXText *>(
sal::static_int_cast< sal_IntPtr >( xTextTunnel->getSomething( SwXText::getUnoTunnelId() )));
assert( pText != nullptr );
m_pDoc = pText->GetDoc();
assert( m_pDoc != nullptr );
return m_pDoc;
}
const SwDoc* SwXMLImport::getDoc() const
{
return const_cast< SwXMLImport* >( this )->getDoc();
}
extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
com_sun_star_comp_Writer_XMLOasisImporter_get_implementation(css::uno::XComponentContext* context,
css::uno::Sequence<css::uno::Any> const &)
{
return cppu::acquire(new SwXMLImport(context, "com.sun.star.comp.Writer.XMLOasisImporter",
SvXMLImportFlags::ALL));
}
extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
com_sun_star_comp_Writer_XMLOasisStylesImporter_get_implementation(css::uno::XComponentContext* context,
css::uno::Sequence<css::uno::Any> const &)
{
return cppu::acquire(new SwXMLImport(context, "com.sun.star.comp.Writer.XMLOasisStylesImporter",
SvXMLImportFlags::STYLES | SvXMLImportFlags::MASTERSTYLES | SvXMLImportFlags::AUTOSTYLES |
SvXMLImportFlags::FONTDECLS));
}
extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
com_sun_star_comp_Writer_XMLOasisContentImporter_get_implementation(css::uno::XComponentContext* context,
css::uno::Sequence<css::uno::Any> const &)
{
return cppu::acquire(new SwXMLImport(context, "com.sun.star.comp.Writer.XMLOasisContentImporter",
SvXMLImportFlags::CONTENT | SvXMLImportFlags::SCRIPTS | SvXMLImportFlags::AUTOSTYLES |
SvXMLImportFlags::FONTDECLS));
}
extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
com_sun_star_comp_Writer_XMLOasisMetaImporter_get_implementation(css::uno::XComponentContext* context,
css::uno::Sequence<css::uno::Any> const &)
{
return cppu::acquire(new SwXMLImport(context, "com.sun.star.comp.Writer.XMLOasisMetaImporter",
SvXMLImportFlags::META));
}
extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
com_sun_star_comp_Writer_XMLOasisSettingsImporter_get_implementation(css::uno::XComponentContext* context,
css::uno::Sequence<css::uno::Any> const &)
{
return cppu::acquire(new SwXMLImport(context, "com.sun.star.comp.Writer.XMLOasisSettingsImporter",
SvXMLImportFlags::SETTINGS));
}
extern "C" SAL_DLLPUBLIC_EXPORT bool TestImportFODT(SvStream &rStream)
{
SwGlobals::ensure();
SfxObjectShellLock xDocSh(new SwDocShell(SfxObjectCreateMode::INTERNAL));
xDocSh->DoInitNew();
uno::Reference<frame::XModel> xModel(xDocSh->GetModel());
uno::Reference<lang::XMultiServiceFactory> xMultiServiceFactory(comphelper::getProcessServiceFactory());
uno::Reference<io::XInputStream> xStream(new utl::OSeekableInputStreamWrapper(rStream));
uno::Reference<uno::XInterface> xInterface(xMultiServiceFactory->createInstance("com.sun.star.comp.Writer.XmlFilterAdaptor"), uno::UNO_QUERY_THROW);
css::uno::Sequence<OUString> aUserData(7);
aUserData[0] = "com.sun.star.comp.filter.OdfFlatXml";
aUserData[2] = "com.sun.star.comp.Writer.XMLOasisImporter";
aUserData[3] = "com.sun.star.comp.Writer.XMLOasisExporter";
aUserData[6] = "true";
uno::Sequence<beans::PropertyValue> aAdaptorArgs(comphelper::InitPropertySequence(
{
{ "UserData", uno::Any(aUserData) },
}));
css::uno::Sequence<uno::Any> aOuterArgs(1);
aOuterArgs[0] <<= aAdaptorArgs;
uno::Reference<lang::XInitialization> xInit(xInterface, uno::UNO_QUERY_THROW);
xInit->initialize(aOuterArgs);
uno::Reference<document::XImporter> xImporter(xInterface, uno::UNO_QUERY_THROW);
uno::Sequence<beans::PropertyValue> aArgs(comphelper::InitPropertySequence(
{
{ "InputStream", uno::Any(xStream) },
{ "URL", uno::Any(OUString("private:stream")) },
}));
xImporter->setTargetDocument(xModel);
uno::Reference<document::XFilter> xFilter(xInterface, uno::UNO_QUERY_THROW);
//SetLoading hack because the document properties will be re-initted
//by the xml filter and during the init, while its considered uninitialized,
//setting a property will inform the document its modified, which attempts
//to update the properties, which throws cause the properties are uninitialized
xDocSh->SetLoading(SfxLoadedFlags::NONE);
bool ret = xFilter->filter(aArgs);
xDocSh->SetLoading(SfxLoadedFlags::ALL);
xDocSh->DoClose();
return ret;
}
extern "C" SAL_DLLPUBLIC_EXPORT bool TestImportDOCX(SvStream &rStream)
{
SwGlobals::ensure();
SfxObjectShellLock xDocSh(new SwDocShell(SfxObjectCreateMode::INTERNAL));
xDocSh->DoInitNew();
uno::Reference<frame::XModel> xModel(xDocSh->GetModel());
uno::Reference<lang::XMultiServiceFactory> xMultiServiceFactory(comphelper::getProcessServiceFactory());
uno::Reference<io::XInputStream> xStream(new utl::OSeekableInputStreamWrapper(rStream));
uno::Reference<document::XFilter> xFilter(xMultiServiceFactory->createInstance("com.sun.star.comp.Writer.WriterFilter"), uno::UNO_QUERY_THROW);
uno::Reference<document::XImporter> xImporter(xFilter, uno::UNO_QUERY_THROW);
uno::Sequence<beans::PropertyValue> aArgs(comphelper::InitPropertySequence(
{
{ "InputStream", uno::makeAny(xStream) },
{ "InputMode", uno::makeAny(true) },
}));
xImporter->setTargetDocument(xModel);
//SetLoading hack because the document properties will be re-initted
//by the xml filter and during the init, while its considered uninitialized,
//setting a property will inform the document its modified, which attempts
//to update the properties, which throws cause the properties are uninitialized
xDocSh->SetLoading(SfxLoadedFlags::NONE);
bool ret = false;
try
{
ret = xFilter->filter(aArgs);
}
catch (...)
{
}
xDocSh->SetLoading(SfxLoadedFlags::ALL);
xDocSh->DoClose();
return ret;
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V522 There might be dereferencing of a potential null pointer.
↑ V560 A part of conditional expression is always true: node1.
↑ V522 There might be dereferencing of a potential null pointer.