/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include "WrappedScaleProperty.hxx"
#include <CommonConverters.hxx>
#include <AxisHelper.hxx>
#include <com/sun/star/chart2/AxisType.hpp>
#include <com/sun/star/chart2/XAxis.hpp>
#include <com/sun/star/chart/ChartAxisType.hpp>
#include <chartview/ExplicitScaleValues.hxx>
#include <osl/diagnose.h>
using namespace ::com::sun::star;
using ::com::sun::star::uno::Any;
using namespace ::com::sun::star::chart2;
using ::com::sun::star::uno::Reference;
using ::com::sun::star::uno::Sequence;
using ::com::sun::star::chart::TimeIncrement;
namespace chart
{
namespace wrapper
{
WrappedScaleProperty::WrappedScaleProperty(tScaleProperty eScaleProperty
, const std::shared_ptr<Chart2ModelContact>& spChart2ModelContact)
: WrappedProperty(OUString(),OUString())
, m_spChart2ModelContact( spChart2ModelContact )
, m_eScaleProperty( eScaleProperty )
{
switch( m_eScaleProperty )
{
case SCALE_PROP_MAX:
m_aOuterName = "Max";
break;
case SCALE_PROP_MIN:
m_aOuterName = "Min";
break;
case SCALE_PROP_ORIGIN:
m_aOuterName = "Origin";
break;
case SCALE_PROP_STEPMAIN:
m_aOuterName = "StepMain";
break;
case SCALE_PROP_STEPHELP:
m_aOuterName = "StepHelp";
break;
case SCALE_PROP_STEPHELP_COUNT:
m_aOuterName = "StepHelpCount";
break;
case SCALE_PROP_AUTO_MAX:
m_aOuterName = "AutoMax";
break;
case SCALE_PROP_AUTO_MIN:
m_aOuterName = "AutoMin";
break;
case SCALE_PROP_AUTO_ORIGIN:
m_aOuterName = "AutoOrigin";
break;
case SCALE_PROP_AUTO_STEPMAIN:
m_aOuterName = "AutoStepMain";
break;
case SCALE_PROP_AUTO_STEPHELP:
m_aOuterName = "AutoStepHelp";
break;
case SCALE_PROP_AXIS_TYPE:
m_aOuterName = "AxisType";
break;
case SCALE_PROP_DATE_INCREMENT:
m_aOuterName = "TimeIncrement";
break;
case SCALE_PROP_EXPLICIT_DATE_INCREMENT:
m_aOuterName = "ExplicitTimeIncrement";
break;
case SCALE_PROP_LOGARITHMIC:
m_aOuterName = "Logarithmic";
break;
case SCALE_PROP_REVERSEDIRECTION:
m_aOuterName = "ReverseDirection";
break;
default:
OSL_FAIL("unknown scale property");
break;
}
}
WrappedScaleProperty::~WrappedScaleProperty()
{
}
void WrappedScaleProperty::addWrappedProperties( std::vector< std::unique_ptr<WrappedProperty> >& rList
, const std::shared_ptr< Chart2ModelContact >& spChart2ModelContact )
{
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_MAX, spChart2ModelContact ) );
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_MIN, spChart2ModelContact ) );
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_ORIGIN, spChart2ModelContact ) );
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_STEPMAIN, spChart2ModelContact ) );
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_STEPHELP, spChart2ModelContact ) );
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_STEPHELP_COUNT, spChart2ModelContact ) );
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_AUTO_MAX, spChart2ModelContact ) );
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_AUTO_MIN, spChart2ModelContact ) );
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_AUTO_ORIGIN, spChart2ModelContact ) );
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_AUTO_STEPMAIN, spChart2ModelContact ) );
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_AUTO_STEPHELP, spChart2ModelContact ) );
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_AXIS_TYPE, spChart2ModelContact ) );
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_DATE_INCREMENT, spChart2ModelContact ) );
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_EXPLICIT_DATE_INCREMENT, spChart2ModelContact ) );
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_LOGARITHMIC, spChart2ModelContact ) );
rList.emplace_back( new WrappedScaleProperty( SCALE_PROP_REVERSEDIRECTION, spChart2ModelContact ) );
}
void WrappedScaleProperty::setPropertyValue( const Any& rOuterValue, const Reference< beans::XPropertySet >& xInnerPropertySet ) const
{
setPropertyValue( m_eScaleProperty, rOuterValue, xInnerPropertySet );
}
Any WrappedScaleProperty::getPropertyValue( const Reference< beans::XPropertySet >& xInnerPropertySet ) const
{
return getPropertyValue( m_eScaleProperty, xInnerPropertySet );
}
void WrappedScaleProperty::setPropertyValue( tScaleProperty eScaleProperty, const Any& rOuterValue, const Reference< beans::XPropertySet >& xInnerPropertySet ) const
{
m_aOuterValue = rOuterValue;
Reference< chart2::XAxis > xAxis( xInnerPropertySet, uno::UNO_QUERY );
OSL_ENSURE(xAxis.is(),"need an XAxis");
if(!xAxis.is())
return;
bool bSetScaleData = false;
chart2::ScaleData aScaleData( xAxis->getScaleData() );
bool bBool = false;
switch( eScaleProperty )
{
case SCALE_PROP_MAX:
{
aScaleData.Maximum = rOuterValue;
bSetScaleData = true;
break;
}
case SCALE_PROP_MIN:
{
aScaleData.Minimum = rOuterValue;
bSetScaleData = true;
break;
}
case SCALE_PROP_STEPMAIN:
{
aScaleData.IncrementData.Distance = rOuterValue;
bSetScaleData = true;
break;
}
case SCALE_PROP_STEPHELP:
{
Sequence< chart2::SubIncrement >& rSubIncrements( aScaleData.IncrementData.SubIncrements );
if( rSubIncrements.getLength() == 0 )
rSubIncrements.realloc( 1 );
double fStepHelp = 0;
if( rOuterValue >>= fStepHelp )
{
double fStepMain = 0;
if( AxisHelper::isLogarithmic(aScaleData.Scaling) )
{
sal_Int32 nIntervalCount = static_cast< sal_Int32 >(fStepHelp);
rSubIncrements[ 0 ].IntervalCount <<= nIntervalCount;
}
else if( (fStepHelp != 0.0) &&
(aScaleData.IncrementData.Distance >>= fStepMain) )
{
// approximate interval count
sal_Int32 nIntervalCount = static_cast< sal_Int32 >(fStepMain / fStepHelp);//cppcheck-suppress zerodiv
rSubIncrements[ 0 ].IntervalCount <<= nIntervalCount;
}
}
bSetScaleData = true;
break;
}
case SCALE_PROP_STEPHELP_COUNT:
{
Sequence< chart2::SubIncrement >& rSubIncrements( aScaleData.IncrementData.SubIncrements );
if( rSubIncrements.getLength() == 0 )
rSubIncrements.realloc( 1 );
sal_Int32 nIntervalCount=0;
if( rOuterValue>>=nIntervalCount )
rSubIncrements[ 0 ].IntervalCount <<= nIntervalCount;
else
rSubIncrements[ 0 ].IntervalCount = Any();
bSetScaleData = true;
break;
}
case SCALE_PROP_AUTO_MAX:
{
if( (rOuterValue >>= bBool) && bBool )
aScaleData.Maximum = Any();
else
aScaleData.Maximum = getPropertyValue( SCALE_PROP_MAX, xInnerPropertySet );
bSetScaleData = true;
break;
}
case SCALE_PROP_AUTO_MIN:
{
if( (rOuterValue >>= bBool) && bBool )
aScaleData.Minimum = Any();
else
aScaleData.Minimum = getPropertyValue( SCALE_PROP_MIN, xInnerPropertySet );
bSetScaleData = true;
break;
}
case SCALE_PROP_AUTO_STEPMAIN:
{
if( (rOuterValue >>= bBool) && bBool )
aScaleData.IncrementData.Distance = Any();
else
aScaleData.IncrementData.Distance = getPropertyValue( SCALE_PROP_STEPMAIN, xInnerPropertySet );
bSetScaleData = true;
break;
}
case SCALE_PROP_AUTO_STEPHELP:
{
Sequence< chart2::SubIncrement >& rSubIncrements( aScaleData.IncrementData.SubIncrements );
if( rSubIncrements.getLength() == 0 )
rSubIncrements.realloc( 1 );
if( (rOuterValue >>= bBool) && bBool )
rSubIncrements[ 0 ].IntervalCount = Any();
else
rSubIncrements[ 0 ].IntervalCount = getPropertyValue( SCALE_PROP_STEPHELP_COUNT, xInnerPropertySet );
bSetScaleData = true;
break;
}
case SCALE_PROP_ORIGIN:
{
aScaleData.Origin = rOuterValue;
bSetScaleData = true;
break;
}
case SCALE_PROP_AUTO_ORIGIN:
{
if( (rOuterValue >>= bBool) && bBool )
aScaleData.Origin = Any();
else
aScaleData.Origin = getPropertyValue( SCALE_PROP_ORIGIN, xInnerPropertySet );
bSetScaleData = true;
break;
}
case SCALE_PROP_AXIS_TYPE:
{
sal_Int32 nType = 0;
if( rOuterValue >>= nType )
{
if( nType == css::chart::ChartAxisType::AUTOMATIC )
{
aScaleData.AutoDateAxis = true;
if( aScaleData.AxisType == AxisType::DATE )
aScaleData.AxisType = AxisType::CATEGORY;
}
else if( nType == css::chart::ChartAxisType::CATEGORY )
{
aScaleData.AutoDateAxis = false;
if( aScaleData.AxisType == AxisType::DATE )
aScaleData.AxisType = AxisType::CATEGORY;
}
else if( nType == css::chart::ChartAxisType::DATE )
{
if( aScaleData.AxisType == AxisType::CATEGORY )
aScaleData.AxisType = AxisType::DATE;
}
bSetScaleData = true;
}
break;
}
case SCALE_PROP_DATE_INCREMENT:
{
TimeIncrement aTimeIncrement;
rOuterValue >>= aTimeIncrement;
aScaleData.TimeIncrement = aTimeIncrement;
bSetScaleData = true;
break;
}
case SCALE_PROP_EXPLICIT_DATE_INCREMENT:
//read only property
break;
case SCALE_PROP_LOGARITHMIC:
{
if( rOuterValue >>= bBool )
{
bool bWasLogarithm = AxisHelper::isLogarithmic( aScaleData.Scaling );
// safe comparison between sal_Bool and bool
if( (!bBool) != (!bWasLogarithm) )
{
if( bBool )
aScaleData.Scaling = AxisHelper::createLogarithmicScaling( 10.0 );
else
aScaleData.Scaling = nullptr;
bSetScaleData = true;
}
}
break;
}
case SCALE_PROP_REVERSEDIRECTION:
{
if( rOuterValue >>= bBool )
{
bool bWasReverse = ( aScaleData.Orientation == AxisOrientation_REVERSE );
if( (!bBool) != (!bWasReverse) ) // safe comparison between sal_Bool and bool
{
aScaleData.Orientation = bBool ? AxisOrientation_REVERSE : AxisOrientation_MATHEMATICAL;
bSetScaleData = true;
}
}
break;
}
default:
{
OSL_FAIL("unknown scale property");
break;
}
}
if( bSetScaleData )
xAxis->setScaleData( aScaleData );
}
Any WrappedScaleProperty::getPropertyValue( tScaleProperty eScaleProperty, const Reference< beans::XPropertySet >& xInnerPropertySet ) const
{
Any aRet( m_aOuterValue );
Reference< chart2::XAxis > xAxis( xInnerPropertySet, uno::UNO_QUERY );
OSL_ENSURE(xAxis.is(),"need an XAxis");
if(!xAxis.is())
return aRet;
chart2::ScaleData aScaleData( xAxis->getScaleData() );
ExplicitScaleData aExplicitScale;
ExplicitIncrementData aExplicitIncrement;
switch( eScaleProperty )
{
case SCALE_PROP_MAX:
{
aRet = aScaleData.Maximum;
if( !aRet.hasValue() )
{
m_spChart2ModelContact->getExplicitValuesForAxis(
xAxis, aExplicitScale, aExplicitIncrement );
aRet <<= aExplicitScale.Maximum;
}
break;
}
case SCALE_PROP_MIN:
{
aRet = aScaleData.Minimum;
if( !aRet.hasValue() )
{
m_spChart2ModelContact->getExplicitValuesForAxis(
xAxis, aExplicitScale, aExplicitIncrement );
aRet <<= aExplicitScale.Minimum;
}
break;
}
case SCALE_PROP_STEPMAIN:
{
aRet = aScaleData.IncrementData.Distance;
if( !aRet.hasValue() )
{
m_spChart2ModelContact->getExplicitValuesForAxis(
xAxis, aExplicitScale, aExplicitIncrement );
aRet <<= aExplicitIncrement.Distance;
}
break;
}
case SCALE_PROP_STEPHELP:
{
// todo: evaluate PostEquidistant
bool bNeedToCalculateExplicitValues = true;
bool bLogarithmic( AxisHelper::isLogarithmic(aScaleData.Scaling) );
Sequence< chart2::SubIncrement >& rSubIncrements( aScaleData.IncrementData.SubIncrements );
if( bLogarithmic )
{
if( rSubIncrements.getLength() > 0 )
{
sal_Int32 nIntervalCount = 0;
rSubIncrements[ 0 ].IntervalCount >>= nIntervalCount;
aRet <<= double(nIntervalCount);
bNeedToCalculateExplicitValues = false;
}
}
else if( aScaleData.IncrementData.Distance.hasValue() )
{
if( rSubIncrements.getLength() > 0 )
{
double fStepMain = 0;
sal_Int32 nIntervalCount = 0;
if( (aScaleData.IncrementData.Distance >>= fStepMain) &&
(rSubIncrements[ 0 ].IntervalCount >>= nIntervalCount) &&
nIntervalCount > 0 )
{
aRet <<= ( fStepMain / static_cast< double >( nIntervalCount ) );
bNeedToCalculateExplicitValues = false;
}
}
else
{
aRet = aScaleData.IncrementData.Distance;
bNeedToCalculateExplicitValues = false;
}
}
if( bNeedToCalculateExplicitValues )
{
m_spChart2ModelContact->getExplicitValuesForAxis(
xAxis, aExplicitScale, aExplicitIncrement );
if( !aExplicitIncrement.SubIncrements.empty() &&
aExplicitIncrement.SubIncrements[ 0 ].IntervalCount > 0 )
{
if( bLogarithmic )
{
if( rSubIncrements.getLength() > 0 )
{
sal_Int32 nIntervalCount = aExplicitIncrement.SubIncrements[ 0 ].IntervalCount;
aRet <<= double(nIntervalCount);
}
}
else
aRet <<= ( aExplicitIncrement.Distance /
static_cast< double >(
aExplicitIncrement.SubIncrements[ 0 ].IntervalCount ));
}
else
{
if( bLogarithmic )
aRet <<= 5.0;
else
aRet <<= aExplicitIncrement.Distance;
}
}
break;
}
case SCALE_PROP_STEPHELP_COUNT:
{
sal_Int32 nIntervalCount = 0;
bool bNeedToCalculateExplicitValues = true;
Sequence< chart2::SubIncrement >& rSubIncrements( aScaleData.IncrementData.SubIncrements );
if( rSubIncrements.getLength() > 0 )
{
if( (rSubIncrements[ 0 ].IntervalCount >>= nIntervalCount) && (nIntervalCount > 0) )
bNeedToCalculateExplicitValues = false;
}
if( bNeedToCalculateExplicitValues )
{
m_spChart2ModelContact->getExplicitValuesForAxis( xAxis, aExplicitScale, aExplicitIncrement );
if( !aExplicitIncrement.SubIncrements.empty() )
nIntervalCount = aExplicitIncrement.SubIncrements[ 0 ].IntervalCount;
}
aRet <<= nIntervalCount;
break;
}
case SCALE_PROP_AUTO_MAX:
{
aRet <<= !aScaleData.Maximum.hasValue();
break;
}
case SCALE_PROP_AUTO_MIN:
{
aRet <<= !aScaleData.Minimum.hasValue();
break;
}
case SCALE_PROP_AUTO_STEPMAIN:
{
aRet <<= !aScaleData.IncrementData.Distance.hasValue();
break;
}
case SCALE_PROP_AUTO_STEPHELP:
{
Sequence< chart2::SubIncrement >& rSubIncrements( aScaleData.IncrementData.SubIncrements );
if( rSubIncrements.getLength() > 0 )
aRet <<= !rSubIncrements[ 0 ].IntervalCount.hasValue();
else
aRet <<= true;
break;
}
case SCALE_PROP_ORIGIN:
{
aRet = aScaleData.Origin;
if( !aRet.hasValue() )
{
m_spChart2ModelContact->getExplicitValuesForAxis(
xAxis, aExplicitScale, aExplicitIncrement );
aRet <<= aExplicitScale.Origin;
}
break;
}
case SCALE_PROP_AUTO_ORIGIN:
{
aRet <<= !hasDoubleValue(aScaleData.Origin);
break;
}
case SCALE_PROP_AXIS_TYPE:
{
sal_Int32 nType = css::chart::ChartAxisType::AUTOMATIC;
if( aScaleData.AxisType == AxisType::DATE )
{
nType = css::chart::ChartAxisType::DATE;
}
else if( aScaleData.AxisType == AxisType::CATEGORY )
{
if( !aScaleData.AutoDateAxis )
nType = css::chart::ChartAxisType::CATEGORY;
}
aRet <<= nType;
break;
}
case SCALE_PROP_DATE_INCREMENT:
{
if( aScaleData.AxisType == AxisType::DATE || aScaleData.AutoDateAxis )
aRet <<= aScaleData.TimeIncrement;
break;
}
case SCALE_PROP_EXPLICIT_DATE_INCREMENT:
{
if( aScaleData.AxisType == AxisType::DATE || aScaleData.AutoDateAxis )
{
m_spChart2ModelContact->getExplicitValuesForAxis( xAxis, aExplicitScale, aExplicitIncrement );
if( aExplicitScale.AxisType == AxisType::DATE )
{
TimeIncrement aTimeIncrement;
aTimeIncrement.MajorTimeInterval <<= aExplicitIncrement.MajorTimeInterval;
aTimeIncrement.MinorTimeInterval <<= aExplicitIncrement.MinorTimeInterval;
aTimeIncrement.TimeResolution <<= aExplicitScale.TimeResolution;
aRet <<= aTimeIncrement;
}
}
if( aScaleData.AxisType == AxisType::DATE || aScaleData.AutoDateAxis )
aRet <<= aScaleData.TimeIncrement;
break;
}
case SCALE_PROP_LOGARITHMIC:
{
aRet <<= AxisHelper::isLogarithmic(aScaleData.Scaling);
break;
}
case SCALE_PROP_REVERSEDIRECTION:
{
aRet <<= aScaleData.Orientation == AxisOrientation_REVERSE;
break;
}
default:
{
OSL_FAIL("unknown scale property");
break;
}
}
return aRet;
}
} // namespace wrapper
} // namespace chart
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V581 The conditional expressions of the 'if' statements situated alongside each other are identical. Check lines: 546, 559.
↑ V1019 Compound assignment expression is used inside condition.
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1019 Compound assignment expression is used inside condition.
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.
↑ V1023 A pointer without owner is added to the 'rList' container by the 'emplace_back' method. A memory leak will occur in case of an exception.