/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <memory>
#include <com/sun/star/document/XDocumentProperties.hpp>
#include <com/sun/star/view/XRenderable.hpp>
#include <sal/log.hxx>
#include <svl/itempool.hxx>
#include <vcl/weld.hxx>
#include <svtools/prnsetup.hxx>
#include <svl/flagitem.hxx>
#include <svl/stritem.hxx>
#include <svl/intitem.hxx>
#include <svl/eitem.hxx>
#include <sfx2/app.hxx>
#include <unotools/useroptions.hxx>
#include <unotools/printwarningoptions.hxx>
#include <tools/datetime.hxx>
#include <sfx2/bindings.hxx>
#include <sfx2/objface.hxx>
#include <sfx2/viewsh.hxx>
#include "viewimp.hxx"
#include <sfx2/viewfrm.hxx>
#include <sfx2/prnmon.hxx>
#include <sfx2/sfxresid.hxx>
#include <sfx2/request.hxx>
#include <sfx2/objsh.hxx>
#include <sfxtypes.hxx>
#include <sfx2/event.hxx>
#include <sfx2/docfile.hxx>
#include <sfx2/docfilt.hxx>
#include <sfx2/strings.hrc>
#include <toolkit/awt/vclxdevice.hxx>
using namespace com::sun::star;
using namespace com::sun::star::uno;
class SfxPrinterController : public vcl::PrinterController, public SfxListener
{
Any maCompleteSelection;
Any maSelection;
Reference< view::XRenderable > mxRenderable;
mutable VclPtr<Printer> mpLastPrinter;
mutable Reference<awt::XDevice> mxDevice;
SfxViewShell* mpViewShell;
SfxObjectShell* mpObjectShell;
bool m_bOrigStatus;
bool m_bNeedsChange;
bool m_bApi;
bool m_bTempPrinter;
util::DateTime m_aLastPrinted;
OUString m_aLastPrintedBy;
Sequence< beans::PropertyValue > getMergedOptions() const;
const Any& getSelectionObject() const;
public:
SfxPrinterController( const VclPtr<Printer>& i_rPrinter,
const Any& i_rComplete,
const Any& i_rSelection,
const Any& i_rViewProp,
const Reference< view::XRenderable >& i_xRender,
bool i_bApi, bool i_bDirect,
SfxViewShell* pView,
const uno::Sequence< beans::PropertyValue >& rProps
);
virtual void Notify( SfxBroadcaster&, const SfxHint& ) override;
virtual int getPageCount() const override;
virtual Sequence< beans::PropertyValue > getPageParameters( int i_nPage ) const override;
virtual void printPage( int i_nPage ) const override;
virtual void jobStarted() override;
virtual void jobFinished( css::view::PrintableState ) override;
};
SfxPrinterController::SfxPrinterController( const VclPtr<Printer>& i_rPrinter,
const Any& i_rComplete,
const Any& i_rSelection,
const Any& i_rViewProp,
const Reference< view::XRenderable >& i_xRender,
bool i_bApi, bool i_bDirect,
SfxViewShell* pView,
const uno::Sequence< beans::PropertyValue >& rProps
)
: PrinterController(i_rPrinter, pView ? pView->GetWindow() : nullptr)
, maCompleteSelection( i_rComplete )
, maSelection( i_rSelection )
, mxRenderable( i_xRender )
, mpLastPrinter( nullptr )
, mpViewShell( pView )
, mpObjectShell(nullptr)
, m_bOrigStatus( false )
, m_bNeedsChange( false )
, m_bApi(i_bApi)
, m_bTempPrinter( i_rPrinter.get() != nullptr )
{
if ( mpViewShell )
{
StartListening( *mpViewShell );
mpObjectShell = mpViewShell->GetObjectShell();
StartListening( *mpObjectShell );
}
// initialize extra ui options
if( mxRenderable.is() )
{
for (sal_Int32 nProp=0; nProp < rProps.getLength(); ++nProp)
setValue( rProps[nProp].Name, rProps[nProp].Value );
Sequence< beans::PropertyValue > aRenderOptions( 3 );
aRenderOptions[0].Name = "ExtraPrintUIOptions";
aRenderOptions[1].Name = "View" ;
aRenderOptions[1].Value = i_rViewProp;
aRenderOptions[2].Name = "IsPrinter";
aRenderOptions[2].Value <<= true;
try
{
Sequence< beans::PropertyValue > aRenderParms( mxRenderable->getRenderer( 0 , getSelectionObject(), aRenderOptions ) );
int nProps = aRenderParms.getLength();
for( int i = 0; i < nProps; i++ )
{
if ( aRenderParms[i].Name == "ExtraPrintUIOptions" )
{
Sequence< beans::PropertyValue > aUIProps;
aRenderParms[i].Value >>= aUIProps;
setUIOptions( aUIProps );
}
else if( aRenderParms[i].Name == "NUp" )
{
setValue( aRenderParms[i].Name, aRenderParms[i].Value );
}
}
}
catch( lang::IllegalArgumentException& )
{
// the first renderer should always be available for the UI options,
// but catch the exception to be safe
}
}
// set some job parameters
setValue( "IsApi", makeAny( i_bApi ) );
setValue( "IsDirect", makeAny( i_bDirect ) );
setValue( "IsPrinter", makeAny( true ) );
setValue( "View", i_rViewProp );
}
void SfxPrinterController::Notify( SfxBroadcaster& , const SfxHint& rHint )
{
if ( rHint.GetId() == SfxHintId::Dying )
{
EndListening(*mpViewShell);
EndListening(*mpObjectShell);
mpViewShell = nullptr;
mpObjectShell = nullptr;
}
}
const Any& SfxPrinterController::getSelectionObject() const
{
const beans::PropertyValue* pVal = getValue( OUString( "PrintSelectionOnly" ) );
if( pVal )
{
bool bSel = false;
pVal->Value >>= bSel;
return bSel ? maSelection : maCompleteSelection;
}
sal_Int32 nChoice = 0;
pVal = getValue( OUString( "PrintContent" ) );
if( pVal )
pVal->Value >>= nChoice;
return (nChoice > 1) ? maSelection : maCompleteSelection;
}
Sequence< beans::PropertyValue > SfxPrinterController::getMergedOptions() const
{
VclPtr<Printer> xPrinter( getPrinter() );
if( xPrinter.get() != mpLastPrinter )
{
mpLastPrinter = xPrinter.get();
VCLXDevice* pXDevice = new VCLXDevice();
pXDevice->SetOutputDevice( mpLastPrinter );
mxDevice.set( pXDevice );
}
Sequence< beans::PropertyValue > aRenderOptions( 1 );
aRenderOptions[ 0 ].Name = "RenderDevice";
aRenderOptions[ 0 ].Value <<= mxDevice;
aRenderOptions = getJobProperties( aRenderOptions );
return aRenderOptions;
}
int SfxPrinterController::getPageCount() const
{
int nPages = 0;
VclPtr<Printer> xPrinter( getPrinter() );
if( mxRenderable.is() && xPrinter )
{
Sequence< beans::PropertyValue > aJobOptions( getMergedOptions() );
try
{
nPages = mxRenderable->getRendererCount( getSelectionObject(), aJobOptions );
}
catch (lang::DisposedException &)
{
SAL_WARN("sfx", "SfxPrinterController: document disposed while printing");
const_cast<SfxPrinterController*>(this)->setJobState(
view::PrintableState_JOB_ABORTED);
}
}
return nPages;
}
Sequence< beans::PropertyValue > SfxPrinterController::getPageParameters( int i_nPage ) const
{
VclPtr<Printer> xPrinter( getPrinter() );
Sequence< beans::PropertyValue > aResult;
if (mxRenderable.is() && xPrinter)
{
Sequence< beans::PropertyValue > aJobOptions( getMergedOptions() );
try
{
aResult = mxRenderable->getRenderer( i_nPage, getSelectionObject(), aJobOptions );
}
catch( lang::IllegalArgumentException& )
{
}
catch (lang::DisposedException &)
{
SAL_WARN("sfx", "SfxPrinterController: document disposed while printing");
const_cast<SfxPrinterController*>(this)->setJobState(
view::PrintableState_JOB_ABORTED);
}
}
return aResult;
}
void SfxPrinterController::printPage( int i_nPage ) const
{
VclPtr<Printer> xPrinter( getPrinter() );
if( mxRenderable.is() && xPrinter )
{
Sequence< beans::PropertyValue > aJobOptions( getMergedOptions() );
try
{
mxRenderable->render( i_nPage, getSelectionObject(), aJobOptions );
}
catch( lang::IllegalArgumentException& )
{
// don't care enough about nonexistent page here
// to provoke a crash
}
catch (lang::DisposedException &)
{
SAL_WARN("sfx", "SfxPrinterController: document disposed while printing");
const_cast<SfxPrinterController*>(this)->setJobState(
view::PrintableState_JOB_ABORTED);
}
}
}
void SfxPrinterController::jobStarted()
{
if ( mpObjectShell )
{
m_bOrigStatus = mpObjectShell->IsEnableSetModified();
// check configuration: shall update of printing information in DocInfo set the document to "modified"?
if ( m_bOrigStatus && !SvtPrintWarningOptions().IsModifyDocumentOnPrintingAllowed() )
{
mpObjectShell->EnableSetModified( false );
m_bNeedsChange = true;
}
// refresh document info
uno::Reference<document::XDocumentProperties> xDocProps(mpObjectShell->getDocProperties());
m_aLastPrintedBy = xDocProps->getPrintedBy();
m_aLastPrinted = xDocProps->getPrintDate();
xDocProps->setPrintedBy( mpObjectShell->IsUseUserData()
? SvtUserOptions().GetFullName()
: OUString() );
::DateTime now( ::DateTime::SYSTEM );
xDocProps->setPrintDate( now.GetUNODateTime() );
SfxGetpApp()->NotifyEvent( SfxEventHint(SfxEventHintId::PrintDoc, GlobalEventConfig::GetEventName( GlobalEventId::PRINTDOC ), mpObjectShell ) );
uno::Sequence < beans::PropertyValue > aOpts;
aOpts = getJobProperties( aOpts );
uno::Reference< frame::XController2 > xController;
if ( mpViewShell )
xController.set( mpViewShell->GetController(), uno::UNO_QUERY );
mpObjectShell->Broadcast( SfxPrintingHint(
view::PrintableState_JOB_STARTED, aOpts, mpObjectShell, xController ) );
}
}
void SfxPrinterController::jobFinished( css::view::PrintableState nState )
{
if ( mpObjectShell )
{
bool bCopyJobSetup = false;
mpObjectShell->Broadcast( SfxPrintingHint( nState ) );
switch ( nState )
{
case view::PrintableState_JOB_SPOOLING_FAILED :
case view::PrintableState_JOB_FAILED :
{
// "real" problem (not simply printing cancelled by user)
OUString aMsg( SfxResId(STR_NOSTARTPRINTER) );
if ( !m_bApi )
{
vcl::Window* pWindow = mpViewShell->GetWindow();
std::unique_ptr<weld::MessageDialog> xBox(Application::CreateMessageDialog(pWindow ? pWindow->GetFrameWeld() : nullptr,
VclMessageType::Warning, VclButtonsType::Ok,
aMsg));
xBox->run();
}
SAL_FALLTHROUGH;
}
case view::PrintableState_JOB_ABORTED :
{
// printing not successful, reset DocInfo
uno::Reference<document::XDocumentProperties> xDocProps(mpObjectShell->getDocProperties());
xDocProps->setPrintedBy(m_aLastPrintedBy);
xDocProps->setPrintDate(m_aLastPrinted);
break;
}
case view::PrintableState_JOB_SPOOLED :
case view::PrintableState_JOB_COMPLETED :
{
SfxBindings& rBind = mpViewShell->GetViewFrame()->GetBindings();
rBind.Invalidate( SID_PRINTDOC );
rBind.Invalidate( SID_PRINTDOCDIRECT );
rBind.Invalidate( SID_SETUPPRINTER );
bCopyJobSetup = ! m_bTempPrinter;
break;
}
default:
break;
}
if( bCopyJobSetup && mpViewShell )
{
// #i114306#
// Note: this possibly creates a printer that gets immediately replaced
// by a new one. The reason for this is that otherwise we would not get
// the printer's SfxItemSet here to copy. Awkward, but at the moment there is no
// other way here to get the item set.
SfxPrinter* pDocPrt = mpViewShell->GetPrinter(true);
if( pDocPrt )
{
if( pDocPrt->GetName() == getPrinter()->GetName() )
pDocPrt->SetJobSetup( getPrinter()->GetJobSetup() );
else
{
VclPtr<SfxPrinter> pNewPrt = VclPtr<SfxPrinter>::Create( pDocPrt->GetOptions().Clone(), getPrinter()->GetName() );
pNewPrt->SetJobSetup( getPrinter()->GetJobSetup() );
mpViewShell->SetPrinter( pNewPrt, SfxPrinterChangeFlags::PRINTER | SfxPrinterChangeFlags::JOBSETUP );
}
}
}
if ( m_bNeedsChange )
mpObjectShell->EnableSetModified( m_bOrigStatus );
if ( mpViewShell )
{
mpViewShell->pImpl->m_xPrinterController.reset();
}
}
}
/**
An instance of this class is created for the life span of the
printer dialogue, to create in its click handler for the additions by the
virtual method of the derived SfxViewShell generated print options dialogue
and to cache the options set there as SfxItemSet.
*/
class SfxDialogExecutor_Impl
{
private:
SfxViewShell* _pViewSh;
PrinterSetupDialog& _rSetupParent;
std::unique_ptr<SfxItemSet> _pOptions;
bool _bHelpDisabled;
DECL_LINK( Execute, weld::Button&, void );
public:
SfxDialogExecutor_Impl( SfxViewShell* pViewSh, PrinterSetupDialog& rParent );
Link<weld::Button&, void> GetLink() const { return LINK(const_cast<SfxDialogExecutor_Impl*>(this), SfxDialogExecutor_Impl, Execute); }
const SfxItemSet* GetOptions() const { return _pOptions.get(); }
void DisableHelp() { _bHelpDisabled = true; }
};
SfxDialogExecutor_Impl::SfxDialogExecutor_Impl( SfxViewShell* pViewSh, PrinterSetupDialog& rParent ) :
_pViewSh ( pViewSh ),
_rSetupParent ( rParent ),
_bHelpDisabled ( false )
{
}
IMPL_LINK_NOARG(SfxDialogExecutor_Impl, Execute, weld::Button&, void)
{
// Options noted locally
if ( !_pOptions )
{
_pOptions = static_cast<SfxPrinter*>( _rSetupParent.GetPrinter() )->GetOptions().Clone();
}
assert(_pOptions);
if (!_pOptions)
return;
// Create Dialog
SfxPrintOptionsDialog aDlg(_rSetupParent.GetFrameWeld(), _pViewSh, _pOptions.get() );
if (_bHelpDisabled)
aDlg.DisableHelp();
if (aDlg.execute() == RET_OK)
{
_pOptions = aDlg.GetOptions().Clone();
}
}
/**
Internal method for setting the differences between 'pNewPrinter' to the
current printer. pNewPrinter is either taken over or deleted.
*/
void SfxViewShell::SetPrinter_Impl( VclPtr<SfxPrinter>& pNewPrinter )
{
// get current Printer
SfxPrinter *pDocPrinter = GetPrinter();
// Evaluate Printer Options
sal_uInt16 nWhich = GetPool().GetWhich(SID_PRINTER_CHANGESTODOC);
const SfxFlagItem *pFlagItem = nullptr;
pDocPrinter->GetOptions().GetItemState( nWhich, false, reinterpret_cast<const SfxPoolItem**>(&pFlagItem) );
bool bOriToDoc = pFlagItem && (static_cast<SfxPrinterChangeFlags>(pFlagItem->GetValue()) & SfxPrinterChangeFlags::CHG_ORIENTATION);
bool bSizeToDoc = pFlagItem && (static_cast<SfxPrinterChangeFlags>(pFlagItem->GetValue()) & SfxPrinterChangeFlags::CHG_SIZE);
// Determine the previous format and size
Orientation eOldOri = pDocPrinter->GetOrientation();
Size aOldPgSz = pDocPrinter->GetPaperSizePixel();
// Determine the new format and size
Orientation eNewOri = pNewPrinter->GetOrientation();
Size aNewPgSz = pNewPrinter->GetPaperSizePixel();
// Determine the changes in page format
bool bOriChg = (eOldOri != eNewOri) && bOriToDoc;
bool bPgSzChg = ( aOldPgSz.Height() !=
( bOriChg ? aNewPgSz.Width() : aNewPgSz.Height() ) ||
aOldPgSz.Width() !=
( bOriChg ? aNewPgSz.Height() : aNewPgSz.Width() ) ) &&
bSizeToDoc;
// Message and Flags for page format, summaries changes
OUString aMsg;
SfxPrinterChangeFlags nNewOpt = SfxPrinterChangeFlags::NONE;
if( bOriChg && bPgSzChg )
{
aMsg = SfxResId(STR_PRINT_NEWORISIZE);
nNewOpt = SfxPrinterChangeFlags::CHG_ORIENTATION | SfxPrinterChangeFlags::CHG_SIZE;
}
else if (bOriChg )
{
aMsg = SfxResId(STR_PRINT_NEWORI);
nNewOpt = SfxPrinterChangeFlags::CHG_ORIENTATION;
}
else if (bPgSzChg)
{
aMsg = SfxResId(STR_PRINT_NEWSIZE);
nNewOpt = SfxPrinterChangeFlags::CHG_SIZE;
}
// Summaries in this variable what has been changed.
SfxPrinterChangeFlags nChangedFlags = SfxPrinterChangeFlags::NONE;
// Ask if possible, if page format should be taken over from printer.
if (bOriChg || bPgSzChg)
{
std::unique_ptr<weld::MessageDialog> xBox(Application::CreateMessageDialog(nullptr,
VclMessageType::Question, VclButtonsType::YesNo,
aMsg));
if (RET_YES == xBox->run())
{
// Flags with changes for <SetPrinter(SfxPrinter*)> are maintained
nChangedFlags |= nNewOpt;
}
}
// For the MAC to have its "temporary of class String" in next if()
OUString aTempPrtName = pNewPrinter->GetName();
OUString aDocPrtName = pDocPrinter->GetName();
// Was the printer selection changed from Default to Specific
// or the other way around?
if ( (aTempPrtName != aDocPrtName) || (pDocPrinter->IsDefPrinter() != pNewPrinter->IsDefPrinter()) )
{
nChangedFlags |= SfxPrinterChangeFlags::PRINTER|SfxPrinterChangeFlags::JOBSETUP;
pDocPrinter = pNewPrinter;
}
else
{
// Compare extra options
if ( ! (pNewPrinter->GetOptions() == pDocPrinter->GetOptions()) )
{
// Option have changed
pDocPrinter->SetOptions( pNewPrinter->GetOptions() );
nChangedFlags |= SfxPrinterChangeFlags::OPTIONS;
}
// Compare JobSetups
JobSetup aNewJobSetup = pNewPrinter->GetJobSetup();
JobSetup aOldJobSetup = pDocPrinter->GetJobSetup();
if ( aNewJobSetup != aOldJobSetup )
{
nChangedFlags |= SfxPrinterChangeFlags::JOBSETUP;
}
// Keep old changed Printer.
pDocPrinter->SetPrinterProps( pNewPrinter );
pNewPrinter.disposeAndClear();
}
if ( SfxPrinterChangeFlags::NONE != nChangedFlags )
// SetPrinter will delete the old printer if it changes
SetPrinter( pDocPrinter, nChangedFlags );
}
void SfxViewShell::StartPrint( const uno::Sequence < beans::PropertyValue >& rProps, bool bIsAPI, bool bIsDirect )
{
assert( pImpl->m_xPrinterController.get() == nullptr );
// get the current selection; our controller should know it
Reference< frame::XController > xController( GetController() );
Reference< view::XSelectionSupplier > xSupplier( xController, UNO_QUERY );
Any aSelection;
if( xSupplier.is() )
aSelection = xSupplier->getSelection();
else
aSelection <<= GetObjectShell()->GetModel();
Any aComplete( makeAny( GetObjectShell()->GetModel() ) );
Any aViewProp( makeAny( xController ) );
VclPtr<Printer> aPrt;
const beans::PropertyValue* pVal = rProps.getConstArray();
for( sal_Int32 i = 0; i < rProps.getLength(); i++ )
{
if ( pVal[i].Name == "PrinterName" )
{
OUString aPrinterName;
pVal[i].Value >>= aPrinterName;
aPrt.reset( VclPtr<Printer>::Create( aPrinterName ) );
break;
}
}
std::shared_ptr<vcl::PrinterController> xNewController(std::make_shared<SfxPrinterController>(
aPrt,
aComplete,
aSelection,
aViewProp,
GetRenderable(),
bIsAPI,
bIsDirect,
this,
rProps
));
pImpl->m_xPrinterController = xNewController;
SfxObjectShell *pObjShell = GetObjectShell();
xNewController->setValue( "JobName",
makeAny( pObjShell->GetTitle(1) ) );
xNewController->setPrinterModified( mbPrinterSettingsModified );
}
void SfxViewShell::ExecPrint( const uno::Sequence < beans::PropertyValue >& rProps, bool bIsAPI, bool bIsDirect )
{
StartPrint( rProps, bIsAPI, bIsDirect );
// FIXME: job setup
SfxPrinter* pDocPrt = GetPrinter();
JobSetup aJobSetup = pDocPrt ? pDocPrt->GetJobSetup() : JobSetup();
Printer::PrintJob( GetPrinterController(), aJobSetup );
}
const std::shared_ptr< vcl::PrinterController >& SfxViewShell::GetPrinterController() const
{
return pImpl->m_xPrinterController;
}
Printer* SfxViewShell::GetActivePrinter() const
{
return pImpl->m_xPrinterController
? pImpl->m_xPrinterController->getPrinter().get() : nullptr;
}
void SfxViewShell::ExecPrint_Impl( SfxRequest &rReq )
{
sal_uInt16 nDialogRet = RET_CANCEL;
VclPtr<SfxPrinter> pPrinter;
bool bSilent = false;
// does the function have been called by the user interface or by an API call
bool bIsAPI = rReq.GetArgs() && rReq.GetArgs()->Count();
if ( bIsAPI )
{
// the function have been called by the API
// Should it be visible on the user interface,
// should it launch popup dialogue ?
const SfxBoolItem* pSilentItem = rReq.GetArg<SfxBoolItem>(SID_SILENT);
bSilent = pSilentItem && pSilentItem->GetValue();
}
// no help button in dialogs if called from the help window
// (pressing help button would exchange the current page inside the help
// document that is going to be printed!)
SfxMedium* pMedium = GetViewFrame()->GetObjectShell()->GetMedium();
std::shared_ptr<const SfxFilter> pFilter = pMedium ? pMedium->GetFilter() : nullptr;
bool bPrintOnHelp = ( pFilter && pFilter->GetFilterName() == "writer_web_HTML_help" );
const sal_uInt16 nId = rReq.GetSlot();
switch( nId )
{
case SID_PRINTDOC: // display the printer selection and properties dialogue : File > Print...
case SID_PRINTDOCDIRECT: // Print the document directly, without displaying the dialogue
{
SfxObjectShell* pDoc = GetObjectShell();
// derived class may decide to abort this
if( pDoc == nullptr || !pDoc->QuerySlotExecutable( nId ) )
{
rReq.SetReturnValue( SfxBoolItem( 0, false ) );
return;
}
if ( !bSilent && pDoc->QueryHiddenInformation( HiddenWarningFact::WhenPrinting, nullptr ) != RET_YES )
return;
// should we print only the selection or the whole document
const SfxBoolItem* pSelectItem = rReq.GetArg<SfxBoolItem>(SID_SELECTION);
bool bSelection = ( pSelectItem != nullptr && pSelectItem->GetValue() );
// detect non api call from writer ( that adds SID_SELECTION ) and reset bIsAPI
if ( pSelectItem && rReq.GetArgs()->Count() == 1 )
bIsAPI = false;
uno::Sequence < beans::PropertyValue > aProps;
if ( bIsAPI )
{
// supported properties:
// String PrinterName
// String FileName
// Int16 From
// Int16 To
// In16 Copies
// String RangeText
// bool Selection
// bool Asynchron
// bool Collate
// bool Silent
// the TransformItems function overwrite aProps
TransformItems( nId, *rReq.GetArgs(), aProps, GetInterface()->GetSlot(nId) );
for ( sal_Int32 nProp=0; nProp < aProps.getLength(); ++nProp )
{
if ( aProps[nProp].Name == "Copies" )
{
aProps[nProp]. Name = "CopyCount";
}
else if ( aProps[nProp].Name == "RangeText" )
{
aProps[nProp]. Name = "Pages";
}
else if ( aProps[nProp].Name == "Asynchron" )
{
aProps[nProp]. Name = "Wait";
bool bAsynchron = false;
aProps[nProp].Value >>= bAsynchron;
aProps[nProp].Value <<= !bAsynchron;
}
else if ( aProps[nProp].Name == "Silent" )
{
aProps[nProp]. Name = "MonitorVisible";
bool bPrintSilent = false;
aProps[nProp].Value >>= bPrintSilent;
aProps[nProp].Value <<= !bPrintSilent;
}
}
}
// we will add the "PrintSelectionOnly" or "HideHelpButton" properties
// we have to increase the capacity of aProps
sal_Int32 nLen = aProps.getLength();
aProps.realloc( nLen + 1 );
// HACK: writer sets the SID_SELECTION item when printing directly and expects
// to get only the selection document in that case (see getSelectionObject)
// however it also reacts to the PrintContent property. We need this distinction here, too,
// else one of the combinations print / print direct and selection / all will not work.
// it would be better if writer handled this internally
if( nId == SID_PRINTDOCDIRECT )
{
aProps[nLen].Name = "PrintSelectionOnly";
aProps[nLen].Value <<= bSelection;
}
else // if nId == SID_PRINTDOC ; nothing to do with the previous HACK
{
// should the printer selection and properties dialogue display an help button
aProps[nLen].Name = "HideHelpButton";
aProps[nLen].Value <<= bPrintOnHelp;
}
ExecPrint( aProps, bIsAPI, (nId == SID_PRINTDOCDIRECT) );
// FIXME: Recording
rReq.Done();
break;
}
case SID_SETUPPRINTER : // display the printer settings dialogue : File > Printer Settings...
case SID_PRINTER_NAME : // only for recorded macros
{
// get printer and printer settings from the document
SfxPrinter *pDocPrinter = GetPrinter(true);
// look for printer in parameters
const SfxStringItem* pPrinterItem = rReq.GetArg<SfxStringItem>(SID_PRINTER_NAME);
if ( pPrinterItem )
{
// use PrinterName parameter to create a printer
pPrinter = VclPtr<SfxPrinter>::Create( pDocPrinter->GetOptions().Clone(), pPrinterItem->GetValue() );
// if printer is unknown, it can't be used - now printer from document will be used
if ( !pPrinter->IsKnown() )
pPrinter.disposeAndClear();
}
if ( SID_PRINTER_NAME == nId )
{
// just set a recorded printer name
if ( pPrinter )
SetPrinter( pPrinter, SfxPrinterChangeFlags::PRINTER );
return;
}
// no PrinterName parameter in ItemSet or the PrinterName points to an unknown printer
if ( !pPrinter )
// use default printer from document
pPrinter = pDocPrinter;
if( !pPrinter || !pPrinter->IsValid() )
{
// no valid printer either in ItemSet or at the document
if ( !bSilent )
{
std::unique_ptr<weld::MessageDialog> xBox(Application::CreateMessageDialog(nullptr,
VclMessageType::Warning, VclButtonsType::Ok,
SfxResId(STR_NODEFPRINTER)));
xBox->run();
}
rReq.SetReturnValue(SfxBoolItem(0,false));
break;
}
// FIXME: printer isn't used for printing anymore!
if( pPrinter->IsPrinting() )
{
// if printer is busy, abort configuration
if ( !bSilent )
{
std::unique_ptr<weld::MessageDialog> xBox(Application::CreateMessageDialog(nullptr,
VclMessageType::Info, VclButtonsType::Ok,
SfxResId(STR_ERROR_PRINTER_BUSY)));
xBox->run();
}
rReq.SetReturnValue(SfxBoolItem(0,false));
return;
}
// if no arguments are given, retrieve them from a dialog
if ( !bIsAPI )
{
// PrinterDialog needs a temporary printer
VclPtr<SfxPrinter> pDlgPrinter = pPrinter->Clone();
// execute PrinterSetupDialog
PrinterSetupDialog aPrintSetupDlg(GetFrameWeld());
std::unique_ptr<SfxDialogExecutor_Impl> pExecutor;
if (pImpl->m_bHasPrintOptions && HasPrintOptionsPage())
{
// additional controls for dialog
pExecutor.reset( new SfxDialogExecutor_Impl( this, aPrintSetupDlg ) );
if ( bPrintOnHelp )
pExecutor->DisableHelp();
aPrintSetupDlg.SetOptionsHdl( pExecutor->GetLink() );
}
aPrintSetupDlg.SetPrinter( pDlgPrinter );
nDialogRet = aPrintSetupDlg.execute();
if ( pExecutor && pExecutor->GetOptions() )
{
if ( nDialogRet == RET_OK )
// remark: have to be recorded if possible!
pDlgPrinter->SetOptions( *pExecutor->GetOptions() );
else
{
pPrinter->SetOptions( *pExecutor->GetOptions() );
SetPrinter( pPrinter, SfxPrinterChangeFlags::OPTIONS );
}
}
// no recording of PrinterSetup except printer name (is printer dependent)
rReq.Ignore();
if ( nDialogRet == RET_OK )
{
if ( pPrinter->GetName() != pDlgPrinter->GetName() )
{
// user has changed the printer -> macro recording
SfxRequest aReq( GetViewFrame(), SID_PRINTER_NAME );
aReq.AppendItem( SfxStringItem( SID_PRINTER_NAME, pDlgPrinter->GetName() ) );
aReq.Done();
}
// take the changes made in the dialog
SetPrinter_Impl( pDlgPrinter );
// forget new printer, it was taken over (as pPrinter) or deleted
pDlgPrinter = nullptr;
mbPrinterSettingsModified = true;
}
else
{
// PrinterDialog is used to transfer information on printing,
// so it will only be deleted here if dialog was cancelled
pDlgPrinter.disposeAndClear();
rReq.Ignore();
}
}
}
}
}
SfxPrinter* SfxViewShell::GetPrinter( bool /*bCreate*/ )
{
return nullptr;
}
sal_uInt16 SfxViewShell::SetPrinter( SfxPrinter* /*pNewPrinter*/, SfxPrinterChangeFlags /*nDiffFlags*/ )
{
return 0;
}
VclPtr<SfxTabPage> SfxViewShell::CreatePrintOptionsPage
(
TabPageParent /*pParent*/,
const SfxItemSet& /*rOptions*/
)
{
return VclPtr<SfxTabPage>();
}
bool SfxViewShell::HasPrintOptionsPage() const
{
return false;
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V595 The 'mpViewShell' pointer was utilized before it was verified against nullptr. Check lines: 358, 370.