/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <hintids.hxx>
#include <svl/aeitem.hxx>
#include <svl/itempool.hxx>
#include <svx/svdobj.hxx>
#include <svx/svdview.hxx>
#include <svx/svdpage.hxx>
#include <editeng/editview.hxx>
#include <editeng/editeng.hxx>
#include <editeng/outliner.hxx>
#include <svx/fmview.hxx>
#include <svx/dataaccessdescriptor.hxx>
#include <sfx2/viewfrm.hxx>
#include <doc.hxx>
#include <IDocumentDeviceAccess.hxx>
#include <textboxhelper.hxx>
#include <editeng/langitem.hxx>
#include <linguistic/lngprops.hxx>
#include <editeng/unolingu.hxx>
#include <svx/fontworkbar.hxx>
#include <svx/fontworkgallery.hxx>
#include <editeng/eeitem.hxx>
#include <svx/svdogrp.hxx>
#include <svx/svdetc.hxx>
#include <editeng/editstat.hxx>
#include <sfx2/request.hxx>
#include <sfx2/bindings.hxx>
#include <sfx2/printer.hxx>
#include <svx/fmglob.hxx>
#include <sfx2/dispatch.hxx>
#include <svx/svdoutl.hxx>
#include <view.hxx>
#include <wrtsh.hxx>
#include <viewopt.hxx>
#include <cmdid.h>
#include <drawsh.hxx>
#include <drwbassh.hxx>
#include <beziersh.hxx>
#include <conrect.hxx>
#include <conpoly.hxx>
#include <conarc.hxx>
#include <conform.hxx>
#include <concustomshape.hxx>
#include <dselect.hxx>
#include <edtwin.hxx>
#include <dcontact.hxx>
#include <svx/svdpagv.hxx>
#include <svx/extrusionbar.hxx>
#include <vcl/svapp.hxx>
#include <comphelper/lok.hxx>
#include <sfx2/lokhelper.hxx>
#include <LibreOfficeKit/LibreOfficeKitEnums.h>
using namespace ::com::sun::star;
// Execute Drawing-Ids
void SwView::ExecDraw(SfxRequest& rReq)
{
const SfxItemSet *pArgs = rReq.GetArgs();
const SfxPoolItem* pItem;
const SfxStringItem* pStringItem = nullptr;
SdrView *pSdrView = m_pWrtShell->GetDrawView();
bool bDeselect = false;
sal_uInt16 nSlotId = rReq.GetSlot();
if(pArgs && SfxItemState::SET == pArgs->GetItemState(GetPool().GetWhich(nSlotId), false, &pItem))
pStringItem = dynamic_cast< const SfxStringItem*>(pItem);
if (nSlotId == SID_OBJECT_SELECT && m_nFormSfxId == nSlotId)
{
bDeselect = true;
}
else if (nSlotId == SID_FM_CREATE_CONTROL)
{
const SfxUInt16Item* pIdentifierItem = rReq.GetArg<SfxUInt16Item>(SID_FM_CONTROL_IDENTIFIER);
if( pIdentifierItem )
{
sal_uInt16 nNewId = pIdentifierItem->GetValue();
if (nNewId == m_nFormSfxId)
{
bDeselect = true;
GetViewFrame()->GetDispatcher()->Execute(SID_FM_LEAVE_CREATE); // Button should popping out
}
}
}
else if (nSlotId == SID_FM_CREATE_FIELDCONTROL)
{
FmFormView* pFormView = dynamic_cast<FmFormView*>(pSdrView);
if (pFormView)
{
const SfxUnoAnyItem* pDescriptorItem = rReq.GetArg<SfxUnoAnyItem>(SID_FM_DATACCESS_DESCRIPTOR);
OSL_ENSURE( pDescriptorItem, "SwView::ExecDraw(SID_FM_CREATE_FIELDCONTROL): invalid request args!" );
if( pDescriptorItem )
{
svx::ODataAccessDescriptor aDescriptor( pDescriptorItem->GetValue() );
SdrObject* pObj = pFormView->CreateFieldControl( aDescriptor );
if ( pObj )
{
Size aDocSize(m_pWrtShell->GetDocSize());
const SwRect& rVisArea = m_pWrtShell->VisArea();
Point aStartPos = rVisArea.Center();
if(rVisArea.Width() > aDocSize.Width())
aStartPos.setX( aDocSize.Width() / 2 + rVisArea.Left() );
if(rVisArea.Height() > aDocSize.Height())
aStartPos.setY( aDocSize.Height() / 2 + rVisArea.Top() );
//determine the size of the object
if(pObj->IsGroupObject())
{
const tools::Rectangle& rBoundRect = static_cast<SdrObjGroup*>(pObj)->GetCurrentBoundRect();
aStartPos.AdjustX( -(rBoundRect.GetWidth()/2) );
aStartPos.AdjustY( -(rBoundRect.GetHeight()/2) );
}
// TODO: unmark all other
m_pWrtShell->EnterStdMode();
m_pWrtShell->SwFEShell::InsertDrawObj( *pObj, aStartPos );
}
}
}
}
else if ( nSlotId == SID_FONTWORK_GALLERY_FLOATER )
{
vcl::Window* pWin = &( m_pWrtShell->GetView().GetViewFrame()->GetWindow() );
if ( pWin )
pWin->EnterWait();
if( !m_pWrtShell->HasDrawView() )
m_pWrtShell->MakeDrawView();
pSdrView = m_pWrtShell->GetDrawView();
if ( pSdrView )
{
SdrObject* pObj = nullptr;
ScopedVclPtrInstance< svx::FontWorkGalleryDialog > aDlg( pSdrView, pWin );
aDlg->SetSdrObjectRef( &pObj, pSdrView->GetModel() );
aDlg->Execute();
if ( pObj )
{
Size aDocSize( m_pWrtShell->GetDocSize() );
const SwRect& rVisArea = m_pWrtShell->VisArea();
Point aPos( rVisArea.Center() );
Size aSize;
Size aPrefSize( pObj->GetSnapRect().GetSize() );
if( rVisArea.Width() > aDocSize.Width())
aPos.setX( aDocSize.Width() / 2 + rVisArea.Left() );
if(rVisArea.Height() > aDocSize.Height())
aPos.setY( aDocSize.Height() / 2 + rVisArea.Top() );
if( aPrefSize.Width() && aPrefSize.Height() )
{
if( pWin )
aSize = pWin->PixelToLogic(aPrefSize, MapMode(MapUnit::MapTwip));
else
aSize = Application::GetDefaultDevice()->PixelToLogic(aPrefSize, MapMode(MapUnit::MapTwip));
}
else
aSize = Size( 2835, 2835 );
m_pWrtShell->EnterStdMode();
m_pWrtShell->SwFEShell::InsertDrawObj( *pObj, aPos );
rReq.Ignore ();
}
}
if( pWin )
pWin->LeaveWait();
}
else if ( m_nFormSfxId != USHRT_MAX )
GetViewFrame()->GetDispatcher()->Execute( SID_FM_LEAVE_CREATE );
if( nSlotId == SID_DRAW_CS_ID )
{
//deselect if same custom shape is selected again
SwDrawBase* pFuncPtr = GetDrawFuncPtr();
if( pFuncPtr && pFuncPtr->GetSlotId() == SID_DRAW_CS_ID )
{
ConstCustomShape* pConstCustomShape = static_cast<ConstCustomShape*>(pFuncPtr);
OUString aNew = ConstCustomShape::GetShapeTypeFromRequest( rReq );
OUString aOld = pConstCustomShape->GetShapeType();
if( aNew == aOld )
{
bDeselect = true;
}
}
}
//deselect if same shape is selected again (but different custom shapes do have same slot id)
if ( bDeselect || (nSlotId == m_nDrawSfxId &&
(!pStringItem || (pStringItem->GetValue() == m_sDrawCustom))
&& (nSlotId != SID_DRAW_CS_ID) ) )
{
if (GetDrawFuncPtr())
{
GetDrawFuncPtr()->Deactivate();
SetDrawFuncPtr(nullptr);
}
if (m_pWrtShell->IsObjSelected() && !m_pWrtShell->IsSelFrameMode())
m_pWrtShell->EnterSelFrameMode();
LeaveDrawCreate();
AttrChangedNotify(m_pWrtShell.get());
return;
}
LeaveDrawCreate();
if (m_pWrtShell->IsFrameSelected())
m_pWrtShell->EnterStdMode(); // because bug #45639
std::unique_ptr<SwDrawBase> pFuncPtr;
switch (nSlotId)
{
case SID_OBJECT_SELECT:
case SID_DRAW_SELECT:
pFuncPtr.reset( new DrawSelection(m_pWrtShell.get(), m_pEditWin, this) );
m_nDrawSfxId = m_nFormSfxId = SID_OBJECT_SELECT;
m_sDrawCustom.clear();
break;
case SID_LINE_ARROW_END:
case SID_LINE_ARROW_CIRCLE:
case SID_LINE_ARROW_SQUARE:
case SID_LINE_ARROW_START:
case SID_LINE_CIRCLE_ARROW:
case SID_LINE_SQUARE_ARROW:
case SID_LINE_ARROWS:
case SID_DRAW_LINE:
case SID_DRAW_XLINE:
case SID_DRAW_MEASURELINE:
case SID_DRAW_RECT:
case SID_DRAW_ELLIPSE:
case SID_DRAW_TEXT:
case SID_DRAW_TEXT_VERTICAL:
case SID_DRAW_TEXT_MARQUEE:
case SID_DRAW_CAPTION:
case SID_DRAW_CAPTION_VERTICAL:
pFuncPtr.reset( new ConstRectangle(m_pWrtShell.get(), m_pEditWin, this) );
m_nDrawSfxId = nSlotId;
m_sDrawCustom.clear();
break;
case SID_DRAW_XPOLYGON_NOFILL:
case SID_DRAW_XPOLYGON:
case SID_DRAW_POLYGON_NOFILL:
case SID_DRAW_POLYGON:
case SID_DRAW_BEZIER_NOFILL:
case SID_DRAW_BEZIER_FILL:
case SID_DRAW_FREELINE_NOFILL:
case SID_DRAW_FREELINE:
pFuncPtr.reset( new ConstPolygon(m_pWrtShell.get(), m_pEditWin, this) );
m_nDrawSfxId = nSlotId;
m_sDrawCustom.clear();
break;
case SID_DRAW_ARC:
case SID_DRAW_PIE:
case SID_DRAW_CIRCLECUT:
pFuncPtr.reset( new ConstArc(m_pWrtShell.get(), m_pEditWin, this) );
m_nDrawSfxId = nSlotId;
m_sDrawCustom.clear();
break;
case SID_FM_CREATE_CONTROL:
{
const SfxUInt16Item* pIdentifierItem = rReq.GetArg<SfxUInt16Item>(SID_FM_CONTROL_IDENTIFIER);
if( pIdentifierItem )
nSlotId = pIdentifierItem->GetValue();
pFuncPtr.reset( new ConstFormControl(m_pWrtShell.get(), m_pEditWin, this) );
m_nFormSfxId = nSlotId;
}
break;
case SID_DRAWTBX_CS_BASIC :
case SID_DRAWTBX_CS_SYMBOL :
case SID_DRAWTBX_CS_ARROW :
case SID_DRAWTBX_CS_FLOWCHART :
case SID_DRAWTBX_CS_CALLOUT :
case SID_DRAWTBX_CS_STAR :
case SID_DRAW_CS_ID :
{
pFuncPtr.reset( new ConstCustomShape(m_pWrtShell.get(), m_pEditWin, this, rReq ) );
m_nDrawSfxId = nSlotId;
if ( nSlotId != SID_DRAW_CS_ID )
{
if ( pStringItem )
{
m_sDrawCustom = pStringItem->GetValue();
SfxBindings& rBind = GetViewFrame()->GetBindings();
rBind.Invalidate( nSlotId );
rBind.Update( nSlotId );
}
}
}
break;
default:
break;
}
GetViewFrame()->GetBindings().Invalidate(SID_ATTRIBUTES_AREA);
bool bEndTextEdit = true;
if (pFuncPtr)
{
if (GetDrawFuncPtr())
{
GetDrawFuncPtr()->Deactivate();
}
auto pTempFuncPtr = pFuncPtr.get();
SetDrawFuncPtr(std::move(pFuncPtr));
AttrChangedNotify(m_pWrtShell.get());
pTempFuncPtr->Activate(nSlotId);
NoRotate();
if(rReq.GetModifier() == KEY_MOD1)
{
if(SID_OBJECT_SELECT == m_nDrawSfxId )
{
m_pWrtShell->GotoObj(true);
}
else
{
pTempFuncPtr->CreateDefaultObject();
pTempFuncPtr->Deactivate();
SetDrawFuncPtr(nullptr);
LeaveDrawCreate();
m_pWrtShell->EnterStdMode();
SdrView *pTmpSdrView = m_pWrtShell->GetDrawView();
const SdrMarkList& rMarkList = pTmpSdrView->GetMarkedObjectList();
if(rMarkList.GetMarkCount() == 1 &&
(SID_DRAW_TEXT == nSlotId || SID_DRAW_TEXT_VERTICAL == nSlotId ||
SID_DRAW_TEXT_MARQUEE == nSlotId ))
{
SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
BeginTextEdit(pObj);
bEndTextEdit = false;
}
}
}
}
else
{
if (m_pWrtShell->IsObjSelected() && !m_pWrtShell->IsSelFrameMode())
m_pWrtShell->EnterSelFrameMode();
}
if(bEndTextEdit && pSdrView && pSdrView->IsTextEdit())
pSdrView->SdrEndTextEdit( true );
AttrChangedNotify(m_pWrtShell.get());
}
// End drawing
void SwView::ExitDraw()
{
NoRotate();
if(m_pShell)
{
// the shell may be invalid at close/reload/SwitchToViewShell
SfxDispatcher* pDispatch = GetViewFrame()->GetDispatcher();
sal_uInt16 nIdx = 0;
SfxShell* pTest = nullptr;
do
{
pTest = pDispatch->GetShell(nIdx++);
}
while( pTest && pTest != this && pTest != m_pShell);
if(pTest == m_pShell &&
// don't call LeaveSelFrameMode() etc. for the below,
// because objects may still be selected:
dynamic_cast< const SwDrawBaseShell *>( m_pShell ) == nullptr &&
dynamic_cast< const SwBezierShell *>( m_pShell ) == nullptr &&
dynamic_cast< const svx::ExtrusionBar *>( m_pShell ) == nullptr &&
dynamic_cast< const svx::FontworkBar *>( m_pShell ) == nullptr)
{
SdrView *pSdrView = m_pWrtShell->GetDrawView();
if (pSdrView && pSdrView->IsGroupEntered())
{
pSdrView->LeaveOneGroup();
pSdrView->UnmarkAll();
GetViewFrame()->GetBindings().Invalidate(SID_ENTER_GROUP);
}
if (GetDrawFuncPtr())
{
if (m_pWrtShell->IsSelFrameMode())
m_pWrtShell->LeaveSelFrameMode();
GetDrawFuncPtr()->Deactivate();
SetDrawFuncPtr(nullptr);
LeaveDrawCreate();
GetViewFrame()->GetBindings().Invalidate(SID_INSERT_DRAW);
}
GetEditWin().SetPointer(Pointer(PointerStyle::Text));
}
}
}
// Disable rotate mode
void SwView::NoRotate()
{
if (IsDrawRotate())
{
m_pWrtShell->SetDragMode(SdrDragMode::Move);
FlipDrawRotate();
const SfxBoolItem aTmp( SID_OBJECT_ROTATE, false );
GetViewFrame()->GetBindings().SetState( aTmp );
}
}
// Enable DrawTextEditMode
static bool lcl_isTextBox(SdrObject const * pObject)
{
if (SwDrawContact* pDrawContact = static_cast<SwDrawContact*>(pObject->GetUserCall()))
{
if (SwFrameFormat* pFormat = pDrawContact->GetFormat())
return SwTextBoxHelper::isTextBox(pFormat, RES_DRAWFRMFMT);
}
return false;
}
bool SwView::EnterDrawTextMode(const Point& aDocPos)
{
SwWrtShell *pSh = &GetWrtShell();
SdrView *pSdrView = pSh->GetDrawView();
OSL_ENSURE( pSdrView, "EnterDrawTextMode without DrawView?" );
bool bReturn = false;
sal_uInt16 nOld = pSdrView->GetHitTolerancePixel();
pSdrView->SetHitTolerancePixel( 2 );
SdrObject* pObj = nullptr;
SdrPageView* pPV = nullptr;
if (pSdrView->IsMarkedHit(aDocPos) && !pSdrView->PickHandle(aDocPos) && IsTextTool())
pObj = pSdrView->PickObj(aDocPos, pSdrView->getHitTolLog(), pPV, SdrSearchOptions::PICKTEXTEDIT);
if (pObj &&
// To allow SwDrawVirtObj text objects to be activated, allow their type, too.
( dynamic_cast< const SdrTextObj *>( pObj ) != nullptr ||
( dynamic_cast< const SwDrawVirtObj *>( pObj ) != nullptr &&
dynamic_cast< const SdrTextObj *>(&static_cast<SwDrawVirtObj*>(pObj)->GetReferencedObj() ) != nullptr ) ) &&
m_pWrtShell->IsSelObjProtected(FlyProtectFlags::Content) == FlyProtectFlags::NONE)
{
// Refuse to edit editeng text of the shape if it has textbox attached.
if (!lcl_isTextBox(pObj))
bReturn = BeginTextEdit( pObj, pPV, m_pEditWin );
}
pSdrView->SetHitTolerancePixel( nOld );
return bReturn;
}
bool SwView::EnterShapeDrawTextMode(SdrObject* pObject)
{
SdrView* pSdrView = GetWrtShell().GetDrawView();
SdrPageView* pPageView = pSdrView->GetSdrPageView();
return BeginTextEdit(pObject, pPageView, m_pEditWin);
}
// Enable DrawTextEditMode
bool SwView::BeginTextEdit(SdrObject* pObj, SdrPageView* pPV, vcl::Window* pWin,
bool bIsNewObj, bool bSetSelectionToStart)
{
SwWrtShell *pSh = &GetWrtShell();
SdrView *pSdrView = pSh->GetDrawView();
std::unique_ptr<SdrOutliner> pOutliner = ::SdrMakeOutliner(OutlinerMode::TextObject, *pSdrView->GetModel());
uno::Reference< linguistic2::XSpellChecker1 > xSpell( ::GetSpellChecker() );
if (pOutliner)
{
pOutliner->SetRefDevice(pSh->getIDocumentDeviceAccess().getReferenceDevice(false));
pOutliner->SetSpeller(xSpell);
uno::Reference<linguistic2::XHyphenator> xHyphenator( ::GetHyphenator() );
pOutliner->SetHyphenator( xHyphenator );
pSh->SetCalcFieldValueHdl(pOutliner.get());
EEControlBits nCntrl = pOutliner->GetControlWord();
nCntrl |= EEControlBits::ALLOWBIGOBJS;
const SwViewOption *pOpt = pSh->GetViewOptions();
if (SwViewOption::IsFieldShadings())
nCntrl |= EEControlBits::MARKFIELDS;
else
nCntrl &= ~EEControlBits::MARKFIELDS;
if (pOpt->IsOnlineSpell())
nCntrl |= EEControlBits::ONLINESPELLING;
else
nCntrl &= ~EEControlBits::ONLINESPELLING;
pOutliner->SetControlWord(nCntrl);
const SfxPoolItem& rItem = pSh->GetDoc()->GetDefault(RES_CHRATR_LANGUAGE);
pOutliner->SetDefaultLanguage(static_cast<const SvxLanguageItem&>(rItem).GetLanguage());
if( bIsNewObj )
pOutliner->SetVertical( SID_DRAW_TEXT_VERTICAL == m_nDrawSfxId ||
SID_DRAW_CAPTION_VERTICAL == m_nDrawSfxId );
// set default horizontal text direction at outliner
EEHorizontalTextDirection aDefHoriTextDir =
pSh->IsShapeDefaultHoriTextDirR2L() ? EEHorizontalTextDirection::R2L : EEHorizontalTextDirection::L2R;
pOutliner->SetDefaultHorizontalTextDirection( aDefHoriTextDir );
}
// To allow editing the referenced object from a SwDrawVirtObj here
// the original needs to be fetched eventually. This ATM activates the
// text edit mode for the original object.
SdrObject* pToBeActivated = pObj;
// Always the original object is edited. To allow the TextEdit to happen
// where the VirtObj is positioned, on demand a occurring offset is set at
// the TextEdit object. That offset is used for creating and managing the
// OutlinerView.
Point aNewTextEditOffset(0, 0);
if (SwDrawVirtObj* pVirtObj = dynamic_cast<SwDrawVirtObj *>(pObj))
{
pToBeActivated = &const_cast<SdrObject&>(pVirtObj->GetReferencedObj());
aNewTextEditOffset = pVirtObj->GetOffset();
}
// set in each case, thus it will be correct for all objects
static_cast<SdrTextObj*>(pToBeActivated)->SetTextEditOffset(aNewTextEditOffset);
bool bRet(pSdrView->SdrBeginTextEdit( pToBeActivated, pPV, pWin, true, pOutliner.release(), nullptr, false, false, false ));
// #i7672#
// Since SdrBeginTextEdit actually creates the OutlinerView and thus also
// sets the background color, an own background color needs to be set
// after TextEditing was started. This is now done here.
if(bRet)
{
OutlinerView* pView = pSdrView->GetTextEditOutlinerView();
if(pView)
{
Color aBackground(pSh->GetShapeBackgrd());
pView->SetBackgroundColor(aBackground);
}
// editing should start at the end of text, spell checking at the beginning ...
ESelection aNewSelection(EE_PARA_NOT_FOUND, EE_INDEX_NOT_FOUND, EE_PARA_NOT_FOUND, EE_INDEX_NOT_FOUND);
if (bSetSelectionToStart)
aNewSelection = ESelection();
if (pView)
{
pView->SetSelection(aNewSelection);
if (comphelper::LibreOfficeKit::isActive())
{
OString sRect = pView->GetOutputArea().toString();
SfxLokHelper::notifyOtherViews(this, LOK_CALLBACK_VIEW_LOCK, "rectangle", sRect);
}
}
}
return bRet;
}
// Is a DrawTextObject selected?
bool SwView::IsTextTool() const
{
sal_uInt16 nId;
SdrInventor nInvent;
SdrView *pSdrView = GetWrtShell().GetDrawView();
OSL_ENSURE( pSdrView, "IsTextTool without DrawView?" );
if (pSdrView->IsCreateMode())
pSdrView->SetCreateMode(false);
pSdrView->TakeCurrentObj(nId,nInvent);
return nInvent == SdrInventor::Default;
}
SdrView* SwView::GetDrawView() const
{
return GetWrtShell().GetDrawView();
}
bool SwView::IsBezierEditMode()
{
return (!IsDrawSelMode() && GetWrtShell().GetDrawView()->HasMarkablePoints());
}
bool SwView::IsFormMode() const
{
if (GetDrawFuncPtr() && GetDrawFuncPtr()->IsCreateObj())
{
return GetDrawFuncPtr()->IsInsertForm();
}
return AreOnlyFormsSelected();
}
void SwView::SetDrawFuncPtr(std::unique_ptr<SwDrawBase> pFuncPtr)
{
m_pDrawActual = std::move(pFuncPtr);
}
void SwView::SetSelDrawSlot()
{
m_nDrawSfxId = SID_OBJECT_SELECT;
m_sDrawCustom.clear();
}
bool SwView::AreOnlyFormsSelected() const
{
if ( GetWrtShell().IsFrameSelected() )
return false;
bool bForm = true;
SdrView* pSdrView = GetWrtShell().GetDrawView();
const SdrMarkList& rMarkList = pSdrView->GetMarkedObjectList();
const size_t nCount = rMarkList.GetMarkCount();
if (nCount)
{
for (size_t i = 0; i < nCount; ++i)
{
// Except controls, are still normal draw objects selected?
SdrObject *pSdrObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
if (!HasOnlyObj(pSdrObj, SdrInventor::FmForm))
{
bForm = false;
break;
}
}
}
else
bForm = false;
return bForm;
}
bool SwView::HasOnlyObj(SdrObject const *pSdrObj, SdrInventor eObjInventor) const
{
bool bRet = false;
if (pSdrObj->IsGroupObject())
{
SdrObjList* pList = pSdrObj->GetSubList();
const size_t nCnt = pList->GetObjCount();
for (size_t i = 0; i < nCnt; ++i)
{
bRet = HasOnlyObj(pList->GetObj(i), eObjInventor);
if (!bRet)
break;
}
}
else if (eObjInventor == pSdrObj->GetObjInventor())
return true;
return bRet;
}
//#i87414# mod
IMPL_LINK(SwView, OnlineSpellCallback, SpellCallbackInfo&, rInfo, void)
{
if (rInfo.nCommand == SpellCallbackCommand::STARTSPELLDLG)
GetViewFrame()->GetDispatcher()->Execute( FN_SPELL_GRAMMAR_DIALOG, SfxCallMode::ASYNCHRON);
else if (rInfo.nCommand == SpellCallbackCommand::AUTOCORRECT_OPTIONS)
GetViewFrame()->GetDispatcher()->Execute( SID_AUTO_CORRECT_DLG, SfxCallMode::ASYNCHRON );
}
bool SwView::ExecDrwTextSpellPopup(const Point& rPt)
{
bool bRet = false;
SdrView *pSdrView = m_pWrtShell->GetDrawView();
OutlinerView* pOLV = pSdrView->GetTextEditOutlinerView();
Point aPos( GetEditWin().LogicToPixel( rPt ) );
if (pOLV->IsWrongSpelledWordAtPos( aPos ))
{
bRet = true;
Link<SpellCallbackInfo&,void> aLink = LINK(this, SwView, OnlineSpellCallback);
pOLV->ExecuteSpellPopup( aPos,&aLink );
}
return bRet;
}
bool SwView::IsDrawTextHyphenate()
{
SdrView *pSdrView = m_pWrtShell->GetDrawView();
bool bHyphenate = false;
SfxItemSet aNewAttr( pSdrView->GetModel()->GetItemPool(),
svl::Items<EE_PARA_HYPHENATE, EE_PARA_HYPHENATE>{} );
pSdrView->GetAttributes( aNewAttr );
if( aNewAttr.GetItemState( EE_PARA_HYPHENATE ) >= SfxItemState::DEFAULT )
bHyphenate = aNewAttr.Get( EE_PARA_HYPHENATE ).GetValue();
return bHyphenate;
}
void SwView::HyphenateDrawText()
{
SdrView *pSdrView = m_pWrtShell->GetDrawView();
bool bHyphenate = IsDrawTextHyphenate();
SfxItemSet aSet( GetPool(), svl::Items<EE_PARA_HYPHENATE, EE_PARA_HYPHENATE>{} );
aSet.Put( SfxBoolItem( EE_PARA_HYPHENATE, !bHyphenate ) );
pSdrView->SetAttributes( aSet );
GetViewFrame()->GetBindings().Invalidate(FN_HYPHENATE_OPT_DLG);
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V547 Expression 'pWin' is always true.
↑ V547 Expression 'pWin' is always true.
↑ V547 Expression 'pWin' is always true.