/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <memory>
#include <com/sun/star/form/FormComponentType.hpp>
#include <com/sun/star/awt/XControlModel.hpp>
#include <com/sun/star/awt/XControl.hpp>
#include <com/sun/star/awt/XWindow2.hpp>
#include <com/sun/star/awt/XActionListener.hpp>
#include <com/sun/star/lang/XEventListener.hpp>
#include <com/sun/star/lang/XMultiServiceFactory.hpp>
#include <com/sun/star/drawing/XShape.hpp>
#include <com/sun/star/drawing/XControlShape.hpp>
#include <com/sun/star/frame/XModel.hpp>
#include <com/sun/star/view/XControlAccess.hpp>
#include <com/sun/star/container/XChild.hpp>
#include <com/sun/star/form/binding/XBindableValue.hpp>
#include <com/sun/star/form/binding/XListEntrySink.hpp>
#include <com/sun/star/table/CellAddress.hpp>
#include <com/sun/star/table/CellRangeAddress.hpp>
#include <com/sun/star/script/XScriptListener.hpp>
#include <com/sun/star/document/XCodeNameQuery.hpp>
#include <com/sun/star/form/XChangeListener.hpp>
#include <ooo/vba/XControlProvider.hpp>
#include <ooo/vba/msforms/fmMousePointer.hpp>
#include <svtools/bindablecontrolhelper.hxx>
#include "service.hxx"
#include "vbacontrol.hxx"
#include "vbacombobox.hxx"
#include "vbabutton.hxx"
#include "vbalabel.hxx"
#include "vbatextbox.hxx"
#include "vbaradiobutton.hxx"
#include "vbalistbox.hxx"
#include "vbatogglebutton.hxx"
#include "vbacheckbox.hxx"
#include "vbaframe.hxx"
#include "vbascrollbar.hxx"
#include "vbaprogressbar.hxx"
#include "vbamultipage.hxx"
#include "vbaspinbutton.hxx"
#include "vbasystemaxcontrol.hxx"
#include "vbaimage.hxx"
#include <vbahelper/helperdecl.hxx>
#include <toolkit/helper/vclunohelper.hxx>
#include <vcl/window.hxx>
#include <com/sun/star/drawing/XDrawPagesSupplier.hpp>
#include <com/sun/star/form/XFormsSupplier.hpp>
#include <svx/svdobj.hxx>
#include <cppuhelper/implbase.hxx>
using namespace com::sun::star;
using namespace ooo::vba;
uno::Reference< css::awt::XWindowPeer >
ScVbaControl::getWindowPeer()
{
uno::Reference< drawing::XControlShape > xControlShape( m_xControl, uno::UNO_QUERY );
uno::Reference< awt::XControlModel > xControlModel;
uno::Reference< css::awt::XWindowPeer > xWinPeer;
if ( !xControlShape.is() )
{
// would seem to be a Userform control
uno::Reference< awt::XControl > xControl( m_xControl, uno::UNO_QUERY_THROW );
xWinPeer = xControl->getPeer();
return xWinPeer;
}
// form control
xControlModel.set( xControlShape->getControl(), uno::UNO_QUERY_THROW );
uno::Reference< view::XControlAccess > xControlAccess( m_xModel->getCurrentController(), uno::UNO_QUERY_THROW );
try
{
uno::Reference< awt::XControl > xControl( xControlAccess->getControl( xControlModel ), uno::UNO_QUERY );
xWinPeer = xControl->getPeer();
}
catch(const uno::Exception&)
{
throw uno::RuntimeException( "The Control does not exist" );
}
return xWinPeer;
}
//ScVbaControlListener
class ScVbaControlListener: public cppu::WeakImplHelper< lang::XEventListener >
{
private:
ScVbaControl *pControl;
public:
explicit ScVbaControlListener( ScVbaControl *pTmpControl );
virtual void SAL_CALL disposing( const lang::EventObject& rEventObject ) override;
};
ScVbaControlListener::ScVbaControlListener( ScVbaControl *pTmpControl ): pControl( pTmpControl )
{
}
void SAL_CALL
ScVbaControlListener::disposing( const lang::EventObject& )
{
if( pControl )
{
pControl->removeResource();
pControl = nullptr;
}
}
//ScVbaControl
ScVbaControl::ScVbaControl( const uno::Reference< XHelperInterface >& xParent, const uno::Reference< uno::XComponentContext >& xContext, const uno::Reference< ::uno::XInterface >& xControl, const css::uno::Reference< css::frame::XModel >& xModel, AbstractGeometryAttributes* pGeomHelper ) : ControlImpl_BASE( xParent, xContext ), m_xControl( xControl ), m_xModel( xModel )
{
//add listener
m_xEventListener.set( new ScVbaControlListener( this ) );
setGeometryHelper( pGeomHelper );
uno::Reference< lang::XComponent > xComponent( m_xControl, uno::UNO_QUERY_THROW );
xComponent->addEventListener( m_xEventListener );
//init m_xProps
uno::Reference< drawing::XControlShape > xControlShape( m_xControl, uno::UNO_QUERY ) ;
uno::Reference< awt::XControl> xUserFormControl( m_xControl, uno::UNO_QUERY ) ;
if ( xControlShape.is() ) // form control
{
m_xProps.set( xControlShape->getControl(), uno::UNO_QUERY_THROW );
OUString sDefaultControl;
m_xProps->getPropertyValue( "DefaultControl" ) >>= sDefaultControl;
uno::Reference< lang::XMultiComponentFactory > xMFac( mxContext->getServiceManager(), uno::UNO_QUERY_THROW );
m_xEmptyFormControl.set( xMFac->createInstanceWithContext( sDefaultControl, mxContext ), uno::UNO_QUERY_THROW );
}
else if ( xUserFormControl.is() ) // userform control
{
m_xProps.set( xUserFormControl->getModel(), uno::UNO_QUERY_THROW );
}
}
ScVbaControl::~ScVbaControl()
{
if( m_xControl.is() )
{
uno::Reference< lang::XComponent > xComponent( m_xControl, uno::UNO_QUERY_THROW );
xComponent->removeEventListener( m_xEventListener );
}
}
void
ScVbaControl::setGeometryHelper( AbstractGeometryAttributes* pHelper )
{
mpGeometryHelper.reset( pHelper );
}
void ScVbaControl::removeResource()
{
uno::Reference< lang::XComponent > xComponent( m_xControl, uno::UNO_QUERY_THROW );
xComponent->removeEventListener( m_xEventListener );
m_xControl= nullptr;
m_xProps = nullptr;
}
//In design model has different behavior
sal_Bool SAL_CALL ScVbaControl::getEnabled()
{
uno::Any aValue = m_xProps->getPropertyValue ( "Enabled" );
bool bRet = false;
aValue >>= bRet;
return bRet;
}
void SAL_CALL ScVbaControl::setEnabled( sal_Bool bVisible )
{
uno::Any aValue( bVisible );
m_xProps->setPropertyValue( "Enabled" , aValue);
}
sal_Bool SAL_CALL ScVbaControl::getVisible()
{
bool bVisible( true );
m_xProps->getPropertyValue ( "EnableVisible" ) >>= bVisible;
uno::Reference< drawing::XControlShape > xControlShape( m_xControl, uno::UNO_QUERY );
if ( xControlShape.is() )
{
bool bEnableVisible = bVisible;
uno::Reference< beans::XPropertySet > xProps( m_xControl, uno::UNO_QUERY_THROW );
xProps->getPropertyValue ( "Visible" ) >>= bVisible;
bVisible = bVisible && bEnableVisible;
}
else
m_xProps->getPropertyValue ( "EnableVisible" ) >>= bVisible;
return bVisible;
}
void SAL_CALL ScVbaControl::setVisible( sal_Bool bVisible )
{
uno::Any aValue( bVisible );
m_xProps->setPropertyValue( "EnableVisible" , aValue);
uno::Reference< drawing::XControlShape > xControlShape( m_xControl, uno::UNO_QUERY );
if ( xControlShape.is() )
{
uno::Reference< beans::XPropertySet > xProps( m_xControl, uno::UNO_QUERY_THROW );
xProps->setPropertyValue ( "Visible", aValue );
}
}
double SAL_CALL ScVbaControl::getHeight()
{
return mpGeometryHelper->getHeight();
}
void SAL_CALL ScVbaControl::setHeight( double _height )
{
mpGeometryHelper->setHeight( _height );
}
double SAL_CALL ScVbaControl::getWidth()
{
return mpGeometryHelper->getWidth();
}
void SAL_CALL ScVbaControl::setWidth( double _width )
{
mpGeometryHelper->setWidth( _width );
}
double SAL_CALL
ScVbaControl::getLeft()
{
return mpGeometryHelper->getLeft();
}
void SAL_CALL
ScVbaControl::setLeft( double _left )
{
mpGeometryHelper->setLeft( _left );
}
double SAL_CALL
ScVbaControl::getTop()
{
return mpGeometryHelper->getTop();
}
void SAL_CALL
ScVbaControl::setTop( double _top )
{
mpGeometryHelper->setTop( _top );
}
uno::Reference< uno::XInterface > SAL_CALL
ScVbaControl::getObject()
{
uno::Reference< msforms::XControl > xRet( this );
return xRet;
}
void SAL_CALL ScVbaControl::SetFocus()
{
uno::Reference< awt::XWindow > xWin( m_xControl, uno::UNO_QUERY_THROW );
xWin->setFocus();
}
void SAL_CALL ScVbaControl::Move( double Left, double Top, const uno::Any& Width, const uno::Any& Height )
{
double nWidth = 0.0;
double nHeight = 0.0;
setLeft( Left );
setTop( Top );
if ( Width >>= nWidth )
setWidth( nWidth );
if ( Height >>= nHeight )
setHeight( nHeight );
}
OUString SAL_CALL
ScVbaControl::getControlSource()
{
// #FIXME I *hate* having these upstream differences
// but this is necessary until I manage to upstream other
// dependent parts
OUString sControlSource;
uno::Reference< form::binding::XBindableValue > xBindable( m_xProps, uno::UNO_QUERY );
if ( xBindable.is() )
{
try
{
uno::Reference< lang::XMultiServiceFactory > xFac( m_xModel, uno::UNO_QUERY_THROW );
uno::Reference< beans::XPropertySet > xConvertor( xFac->createInstance( "com.sun.star.table.CellAddressConversion" ), uno::UNO_QUERY );
uno::Reference< beans::XPropertySet > xProps( xBindable->getValueBinding(), uno::UNO_QUERY_THROW );
table::CellAddress aAddress;
xProps->getPropertyValue( "BoundCell" ) >>= aAddress;
xConvertor->setPropertyValue( "Address" , uno::makeAny( aAddress ) );
xConvertor->getPropertyValue( "XLA1Representation" ) >>= sControlSource;
}
catch(const uno::Exception&)
{
}
}
return sControlSource;
}
void SAL_CALL
ScVbaControl::setControlSource( const OUString& _controlsource )
{
// afaik this is only relevant for Excel documents ( and we need to set up a
// reference tab in case no Sheet is specified in "_controlsource"
// Can't use the active sheet either, code may of course access
uno::Reference< drawing::XDrawPagesSupplier > xSupplier( m_xModel, uno::UNO_QUERY_THROW );
uno::Reference< container::XIndexAccess > xIndex( xSupplier->getDrawPages(), uno::UNO_QUERY_THROW );
sal_Int32 nLen = xIndex->getCount();
bool bMatched = false;
sal_Int16 nRefTab = 0;
for ( sal_Int32 index = 0; index < nLen; ++index )
{
try
{
uno::Reference< form::XFormsSupplier > xFormSupplier( xIndex->getByIndex( index ), uno::UNO_QUERY_THROW );
uno::Reference< container::XIndexAccess > xFormIndex( xFormSupplier->getForms(), uno::UNO_QUERY_THROW );
// get the www-standard container
uno::Reference< container::XIndexAccess > xFormControls( xFormIndex->getByIndex(0), uno::UNO_QUERY_THROW );
sal_Int32 nCntrls = xFormControls->getCount();
for( sal_Int32 cIndex = 0; cIndex < nCntrls; ++cIndex )
{
uno::Reference< uno::XInterface > xControl( xFormControls->getByIndex( cIndex ), uno::UNO_QUERY_THROW );
bMatched = ( m_xProps == xControl );
if ( bMatched )
{
nRefTab = index;
break;
}
}
}
catch( uno::Exception& ) {}
if ( bMatched )
break;
}
svt::BindableControlHelper::ApplyListSourceAndBindableData( m_xModel, m_xProps, _controlsource, "", sal_uInt16( nRefTab ) );
}
OUString SAL_CALL
ScVbaControl::getRowSource()
{
OUString sRowSource;
uno::Reference< form::binding::XListEntrySink > xListSink( m_xProps, uno::UNO_QUERY );
if ( xListSink.is() )
{
try
{
uno::Reference< lang::XMultiServiceFactory > xFac( m_xModel, uno::UNO_QUERY_THROW );
uno::Reference< beans::XPropertySet > xConvertor( xFac->createInstance( "com.sun.star.table.CellRangeAddressConversion" ), uno::UNO_QUERY );
uno::Reference< beans::XPropertySet > xProps( xListSink->getListEntrySource(), uno::UNO_QUERY_THROW );
table::CellRangeAddress aAddress;
xProps->getPropertyValue( "CellRange" ) >>= aAddress;
xConvertor->setPropertyValue( "Address" , uno::makeAny( aAddress ) );
xConvertor->getPropertyValue( "XLA1Representation" ) >>= sRowSource;
}
catch(const uno::Exception&)
{
}
}
return sRowSource;
}
void SAL_CALL
ScVbaControl::setRowSource( const OUString& _rowsource )
{
svt::BindableControlHelper::ApplyListSourceAndBindableData( m_xModel, m_xProps, "", _rowsource );
}
OUString SAL_CALL
ScVbaControl::getName()
{
OUString sName;
m_xProps->getPropertyValue( "Name" ) >>= sName;
return sName;
}
void SAL_CALL
ScVbaControl::setName( const OUString& _name )
{
m_xProps->setPropertyValue( "Name" , uno::makeAny( _name ) );
}
OUString SAL_CALL
ScVbaControl::getControlTipText()
{
OUString sName;
m_xProps->getPropertyValue( "HelpText" ) >>= sName;
return sName;
}
void SAL_CALL
ScVbaControl::setControlTipText( const OUString& rsToolTip )
{
m_xProps->setPropertyValue( "HelpText" , uno::makeAny( rsToolTip ) );
}
OUString SAL_CALL ScVbaControl::getTag()
{
return m_aControlTag;
}
void SAL_CALL ScVbaControl::setTag( const OUString& aTag )
{
m_aControlTag = aTag;
}
::sal_Int32 SAL_CALL ScVbaControl::getForeColor()
{
Color nForeColor;
m_xProps->getPropertyValue( "TextColor" ) >>= nForeColor;
return OORGBToXLRGB( nForeColor );
}
struct PointerStyles
{
long msoPointerStyle;
PointerStyle loPointStyle;
};
// 1 -> 1 map of styles ( some dubious choices in there though )
PointerStyles const styles[] = {
/// assuming pointer default is Arrow
{ msforms::fmMousePointer::fmMousePointerDefault, PointerStyle::Arrow },
{ msforms::fmMousePointer::fmMousePointerArrow, PointerStyle::Arrow },
{ msforms::fmMousePointer::fmMousePointerCross, PointerStyle::Cross },
{ msforms::fmMousePointer::fmMousePointerIBeam, PointerStyle::Text },
{ msforms::fmMousePointer::fmMousePointerSizeNESW, PointerStyle::AutoScrollNSWE }, // #TODO not correct, need to check, need to find the right one
{ msforms::fmMousePointer::fmMousePointerSizeNS, PointerStyle::AutoScrollNS },
{ msforms::fmMousePointer::fmMousePointerSizeNWSE, PointerStyle::AutoScrollNSWE }, // #TODO not correct, need to check, need to find the right one
{ msforms::fmMousePointer::fmMousePointerSizeWE, PointerStyle::AutoScrollWE },
{ msforms::fmMousePointer::fmMousePointerUpArrow, PointerStyle::WindowNSize },
{ msforms::fmMousePointer::fmMousePointerHourGlass, PointerStyle::Wait },
{ msforms::fmMousePointer::fmMousePointerNoDrop, PointerStyle::NotAllowed },
{ msforms::fmMousePointer::fmMousePointerAppStarting, PointerStyle::Wait },
{ msforms::fmMousePointer::fmMousePointerHelp, PointerStyle::Help },
{ msforms::fmMousePointer::fmMousePointerSizeAll, PointerStyle::Cross },
{ msforms::fmMousePointer::fmMousePointerCustom, PointerStyle::Arrow }, // not supported I guess
};
static long lcl_loPointerToMsoPointer( PointerStyle eType )
{
long nRet = msforms::fmMousePointer::fmMousePointerDefault;
for ( int i = 0; i < int(SAL_N_ELEMENTS( styles )); ++i )
{
if ( styles[ i ].loPointStyle == eType )
{
nRet = styles[ i ].msoPointerStyle;
break;
}
}
return nRet;
}
static Pointer lcl_msoPointerToLOPointer( long msoPointerStyle )
{
Pointer aPointer( PointerStyle::Arrow );
for ( int i = 0; i < int(SAL_N_ELEMENTS( styles )); ++i )
{
if ( styles[ i ].msoPointerStyle == msoPointerStyle )
{
aPointer = Pointer( styles[ i ].loPointStyle );
break;
}
}
return aPointer;
}
::sal_Int32 SAL_CALL
ScVbaControl::getMousePointer()
{
PointerStyle eType = PointerStyle::Arrow; // default ?
VclPtr<vcl::Window> pWindow = VCLUnoHelper::GetWindow( getWindowPeer() );
if ( pWindow )
{
eType = pWindow->GetPointer().GetStyle();
}
return lcl_loPointerToMsoPointer( eType );
}
void SAL_CALL
ScVbaControl::setMousePointer( ::sal_Int32 _mousepointer )
{
VclPtr<vcl::Window> pWindow = VCLUnoHelper::GetWindow( getWindowPeer() );
if ( pWindow )
{
Pointer aPointer( PointerStyle::Arrow );
aPointer = lcl_msoPointerToLOPointer( _mousepointer );
pWindow->SetPointer( aPointer );
}
}
void SAL_CALL ScVbaControl::fireEvent( const script::ScriptEvent& rEvt )
{
script::ScriptEvent evt( rEvt );
uno::Reference<lang::XMultiComponentFactory > xServiceManager( mxContext->getServiceManager(), uno::UNO_QUERY_THROW );
uno::Reference< script::XScriptListener > xScriptListener( xServiceManager->createInstanceWithContext( "ooo.vba.EventListener" , mxContext ), uno::UNO_QUERY_THROW );
uno::Reference< beans::XPropertySet > xProps( xScriptListener, uno::UNO_QUERY_THROW );
xProps->setPropertyValue( "Model" , uno::makeAny( m_xModel ) );
// handling for sheet control
uno::Reference< msforms::XControl > xThisControl( this );
try
{
evt.Arguments.realloc( 1 );
lang::EventObject aEvt;
uno::Reference< drawing::XControlShape > xControlShape( m_xControl, uno::UNO_QUERY ) ;
uno::Reference< awt::XControl > xControl( m_xControl, uno::UNO_QUERY ) ;
if ( xControlShape.is() )
{
evt.Source = xControlShape;
aEvt.Source = m_xEmptyFormControl;
// Set up proper scriptcode
uno::Reference< lang::XMultiServiceFactory > xDocFac( m_xModel, uno::UNO_QUERY_THROW );
uno::Reference< document::XCodeNameQuery > xNameQuery( xDocFac->createInstance( "ooo.vba.VBACodeNameProvider" ), uno::UNO_QUERY_THROW );
uno::Reference< uno::XInterface > xIf( xControlShape->getControl(), uno::UNO_QUERY_THROW );
evt.ScriptCode = xNameQuery->getCodeNameForObject( xIf );
// handle if we passed in our own arguments
if ( !rEvt.Arguments.getLength() )
evt.Arguments[ 0 ] <<= aEvt;
xScriptListener->firing( evt );
}
else
{
if ( xControl.is() ) // normal control ( from dialog/userform )
{
// #FIXME We should probably store a reference to the
// parent dialog/userform here ( other wise the name of
// dialog could be changed and we won't be aware of it.
// ( OTOH this is probably an unlikely scenario )
evt.Source = xThisControl;
aEvt.Source = xControl;
evt.ScriptCode = m_sLibraryAndCodeName;
evt.Arguments[ 0 ] <<= aEvt;
xScriptListener->firing( evt );
}
}
}
catch(const uno::Exception&)
{
}
}
void ScVbaControl::fireChangeEvent()
{
script::ScriptEvent evt;
evt.ScriptType = "VBAInterop";
evt.ListenerType = cppu::UnoType<form::XChangeListener>::get();
evt.MethodName = "changed";
fireEvent( evt );
}
void ScVbaControl::fireClickEvent()
{
script::ScriptEvent evt;
evt.ScriptType = "VBAInterop";
evt.ListenerType = cppu::UnoType<awt::XActionListener>::get();
evt.MethodName = "actionPerformed";
fireEvent( evt );
}
sal_Int32 SAL_CALL ScVbaControl::getTabIndex()
{
return 1;
}
void SAL_CALL ScVbaControl::setTabIndex( sal_Int32 /*nTabIndex*/ )
{
}
//ScVbaControlFactory
/*static*/ uno::Reference< msforms::XControl > ScVbaControlFactory::createShapeControl(
const uno::Reference< uno::XComponentContext >& xContext,
const uno::Reference< drawing::XControlShape >& xControlShape,
const uno::Reference< frame::XModel >& xModel )
{
uno::Reference< beans::XPropertySet > xProps( xControlShape->getControl(), uno::UNO_QUERY_THROW );
sal_Int32 nClassId = -1;
xProps->getPropertyValue( "ClassId" ) >>= nClassId;
uno::Reference< XHelperInterface > xVbaParent; // #FIXME - should be worksheet I guess
uno::Reference< drawing::XShape > xShape( xControlShape, uno::UNO_QUERY_THROW );
::std::unique_ptr< ConcreteXShapeGeometryAttributes > xGeoHelper( new ConcreteXShapeGeometryAttributes( xShape ) );
switch( nClassId )
{
case form::FormComponentType::COMBOBOX:
return new ScVbaComboBox( xVbaParent, xContext, xControlShape, xModel, xGeoHelper.release() );
case form::FormComponentType::COMMANDBUTTON:
{
bool bToggle = false;
xProps->getPropertyValue( "Toggle" ) >>= bToggle;
if ( bToggle )
return new ScVbaToggleButton( xVbaParent, xContext, xControlShape, xModel, xGeoHelper.release() );
else
return new VbaButton( xVbaParent, xContext, xControlShape, xModel, xGeoHelper.release() );
}
case form::FormComponentType::FIXEDTEXT:
return new ScVbaLabel( xVbaParent, xContext, xControlShape, xModel, xGeoHelper.release() );
case form::FormComponentType::TEXTFIELD:
return new ScVbaTextBox( xVbaParent, xContext, xControlShape, xModel, xGeoHelper.release() );
case form::FormComponentType::CHECKBOX:
return new ScVbaCheckbox( xVbaParent, xContext, xControlShape, xModel, xGeoHelper.release() );
case form::FormComponentType::RADIOBUTTON:
return new ScVbaRadioButton( xVbaParent, xContext, xControlShape, xModel, xGeoHelper.release() );
case form::FormComponentType::LISTBOX:
return new ScVbaListBox( xVbaParent, xContext, xControlShape, xModel, xGeoHelper.release() );
case form::FormComponentType::SPINBUTTON:
return new ScVbaSpinButton( xVbaParent, xContext, xControlShape, xModel, xGeoHelper.release() );
case form::FormComponentType::IMAGECONTROL:
return new ScVbaImage( xVbaParent, xContext, xControlShape, xModel, xGeoHelper.release() );
case form::FormComponentType::SCROLLBAR:
return new ScVbaScrollBar( xVbaParent, xContext, xControlShape, xModel, xGeoHelper.release() );
}
throw uno::RuntimeException( "Unsupported control." );
}
/*static*/ uno::Reference< msforms::XControl > ScVbaControlFactory::createUserformControl(
const uno::Reference< uno::XComponentContext >& xContext,
const uno::Reference< awt::XControl >& xControl,
const uno::Reference< awt::XControl >& xDialog,
const uno::Reference< frame::XModel >& xModel,
double fOffsetX, double fOffsetY )
{
uno::Reference< beans::XPropertySet > xProps( xControl->getModel(), uno::UNO_QUERY_THROW );
uno::Reference< lang::XServiceInfo > xServiceInfo( xProps, uno::UNO_QUERY_THROW );
uno::Reference< msforms::XControl > xVBAControl;
uno::Reference< XHelperInterface > xVbaParent; // #FIXME - should be worksheet I guess
::std::unique_ptr< UserFormGeometryHelper > xGeoHelper( new UserFormGeometryHelper( xControl, fOffsetX, fOffsetY ) );
if ( xServiceInfo->supportsService( "com.sun.star.awt.UnoControlCheckBoxModel" ) )
xVBAControl.set( new ScVbaCheckbox( xVbaParent, xContext, xControl, xModel, xGeoHelper.release() ) );
else if ( xServiceInfo->supportsService( "com.sun.star.awt.UnoControlRadioButtonModel" ) )
xVBAControl.set( new ScVbaRadioButton( xVbaParent, xContext, xControl, xModel, xGeoHelper.release() ) );
else if ( xServiceInfo->supportsService( "com.sun.star.awt.UnoControlEditModel" ) )
xVBAControl.set( new ScVbaTextBox( xVbaParent, xContext, xControl, xModel, xGeoHelper.release(), true ) );
else if ( xServiceInfo->supportsService( "com.sun.star.awt.UnoControlButtonModel" ) )
{
bool bToggle = false;
xProps->getPropertyValue( "Toggle" ) >>= bToggle;
if ( bToggle )
xVBAControl.set( new ScVbaToggleButton( xVbaParent, xContext, xControl, xModel, xGeoHelper.release() ) );
else
xVBAControl.set( new VbaButton( xVbaParent, xContext, xControl, xModel, xGeoHelper.release() ) );
}
else if ( xServiceInfo->supportsService( "com.sun.star.awt.UnoControlComboBoxModel" ) )
xVBAControl.set( new ScVbaComboBox( xVbaParent, xContext, xControl, xModel, xGeoHelper.release() ) );
else if ( xServiceInfo->supportsService( "com.sun.star.awt.UnoControlListBoxModel" ) )
xVBAControl.set( new ScVbaListBox( xVbaParent, xContext, xControl, xModel, xGeoHelper.release() ) );
else if ( xServiceInfo->supportsService( "com.sun.star.awt.UnoControlFixedTextModel" ) )
xVBAControl.set( new ScVbaLabel( xVbaParent, xContext, xControl, xModel, xGeoHelper.release() ) );
else if ( xServiceInfo->supportsService( "com.sun.star.awt.UnoControlImageControlModel" ) )
xVBAControl.set( new ScVbaImage( xVbaParent, xContext, xControl, xModel, xGeoHelper.release() ) );
else if ( xServiceInfo->supportsService( "com.sun.star.awt.UnoControlProgressBarModel" ) )
xVBAControl.set( new ScVbaProgressBar( xVbaParent, xContext, xControl, xModel, xGeoHelper.release() ) );
else if ( xServiceInfo->supportsService( "com.sun.star.awt.UnoControlGroupBoxModel" ) )
xVBAControl.set( new ScVbaFrame( xVbaParent, xContext, xControl, xModel, xGeoHelper.release(), xDialog ) );
else if ( xServiceInfo->supportsService( "com.sun.star.awt.UnoControlScrollBarModel" ) )
xVBAControl.set( new ScVbaScrollBar( xVbaParent, xContext, xControl, xModel, xGeoHelper.release() ) );
else if ( xServiceInfo->supportsService( "com.sun.star.awt.UnoMultiPageModel" ) )
xVBAControl.set( new ScVbaMultiPage( xVbaParent, xContext, xControl, xModel, xGeoHelper.release() ) );
else if ( xServiceInfo->supportsService( "com.sun.star.awt.UnoControlSpinButtonModel" ) )
xVBAControl.set( new ScVbaSpinButton( xVbaParent, xContext, xControl, xModel, xGeoHelper.release() ) );
else if ( xServiceInfo->supportsService( "com.sun.star.custom.awt.UnoControlSystemAXContainerModel" ) )
xVBAControl.set( new VbaSystemAXControl( xVbaParent, xContext, xControl, xModel, xGeoHelper.release() ) );
// #FIXME implement a page control
else if ( xServiceInfo->supportsService( "com.sun.star.awt.UnoPageModel" ) )
xVBAControl.set( new ScVbaControl( xVbaParent, xContext, xControl, xModel, xGeoHelper.release() ) );
else if ( xServiceInfo->supportsService( "com.sun.star.awt.UnoFrameModel" ) )
xVBAControl.set( new ScVbaFrame( xVbaParent, xContext, xControl, xModel, xGeoHelper.release(), xDialog ) );
if( xVBAControl.is() )
return xVBAControl;
throw uno::RuntimeException( "Unsupported control." );
}
OUString
ScVbaControl::getServiceImplName()
{
return OUString("ScVbaControl");
}
uno::Sequence< OUString >
ScVbaControl::getServiceNames()
{
static uno::Sequence< OUString > aServiceNames;
if ( aServiceNames.getLength() == 0 )
{
aServiceNames.realloc( 1 );
aServiceNames[ 0 ] = "ooo.vba.excel.Control";
}
return aServiceNames;
}
sal_Int32 const nSysCols[] = { 0xC8D0D4, 0x0, 0x6A240A, 0x808080, 0xE4E4E4, 0xFFFFFF, 0x0, 0x0, 0x0, 0xFFFFFF, 0xE4E4E4, 0xE4E4E4, 0x808080, 0x6A240A, 0xFFFFFF, 0xE4E4E4, 0x808080, 0x808080, 0x0, 0xC8D0D4, 0xFFFFFF, 0x404040, 0xE4E4E4, 0x0, 0xE1FFFF };
sal_Int32 ScVbaControl::getBackColor()
{
sal_Int32 nBackColor = 0;
m_xProps->getPropertyValue( "BackgroundColor" ) >>= nBackColor;
return nBackColor;
}
void ScVbaControl::setBackColor( sal_Int32 nBackColor )
{
if ( ( static_cast<sal_uInt32>(nBackColor) >= sal_uInt32(0x80000000) ) &&
( static_cast<sal_uInt32>(nBackColor) <= sal_uInt32(0x80000000) + SAL_N_ELEMENTS(nSysCols) ) )
{
nBackColor = nSysCols[ nBackColor & 0x0FF];
}
m_xProps->setPropertyValue( "BackgroundColor" , uno::makeAny( XLRGBToOORGB( nBackColor ) ) );
}
bool ScVbaControl::getAutoSize()
{
bool bIsResizeEnabled = false;
uno::Reference< uno::XInterface > xIf( m_xControl, uno::UNO_QUERY_THROW );
SdrObject* pObj = SdrObject::getSdrObjectFromXShape( xIf );
if ( pObj )
bIsResizeEnabled = !pObj->IsResizeProtect();
return bIsResizeEnabled;
}
// currently no implementation for this
void ScVbaControl::setAutoSize( bool bAutoSize )
{
uno::Reference< uno::XInterface > xIf( m_xControl, uno::UNO_QUERY_THROW );
SdrObject* pObj = SdrObject::getSdrObjectFromXShape( xIf );
if ( pObj )
pObj->SetResizeProtect( !bAutoSize );
}
bool ScVbaControl::getLocked()
{
bool bRes( false );
m_xProps->getPropertyValue( "ReadOnly" ) >>= bRes;
return bRes;
}
void ScVbaControl::setLocked( bool bLocked )
{
m_xProps->setPropertyValue( "ReadOnly" , uno::makeAny( bLocked ) );
}
class ControlProviderImpl : public cppu::WeakImplHelper< XControlProvider >
{
uno::Reference< uno::XComponentContext > m_xCtx;
public:
explicit ControlProviderImpl( const uno::Reference< uno::XComponentContext >& xCtx ) : m_xCtx( xCtx ) {}
virtual uno::Reference< msforms::XControl > SAL_CALL createControl( const uno::Reference< drawing::XControlShape >& xControl, const uno::Reference< frame::XModel >& xDocOwner ) override;
};
uno::Reference< msforms::XControl > SAL_CALL
ControlProviderImpl::createControl( const uno::Reference< drawing::XControlShape >& xControlShape, const uno::Reference< frame::XModel >& xDocOwner )
{
uno::Reference< msforms::XControl > xControlToReturn;
if ( xControlShape.is() )
xControlToReturn = ScVbaControlFactory::createShapeControl( m_xCtx, xControlShape, xDocOwner );
return xControlToReturn;
}
namespace controlprovider
{
namespace sdecl = comphelper::service_decl;
sdecl::class_<ControlProviderImpl, sdecl::with_args<false> > const serviceImpl;
sdecl::ServiceDecl const serviceDecl(
serviceImpl,
"ControlProviderImpl",
"ooo.vba.ControlProvider" );
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V1001 The 'aValue' variable is assigned but is not used by the end of the function.