/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <memory>
#include <sal/config.h>
#include <sal/log.hxx>
#include <cmdid.h>
#include <drawdoc.hxx>
#include <unodraw.hxx>
#include <unocoll.hxx>
#include <unoframe.hxx>
#include <unoparagraph.hxx>
#include <unotextrange.hxx>
#include <svx/svditer.hxx>
#include <swunohelper.hxx>
#include <textboxhelper.hxx>
#include <doc.hxx>
#include <docary.hxx>
#include <IDocumentUndoRedo.hxx>
#include <IDocumentDrawModelAccess.hxx>
#include <IDocumentLayoutAccess.hxx>
#include <fmtcntnt.hxx>
#include <fmtflcnt.hxx>
#include <txtatr.hxx>
#include <docsh.hxx>
#include <unomap.hxx>
#include <unoport.hxx>
#include <TextCursorHelper.hxx>
#include <dflyobj.hxx>
#include <ndtxt.hxx>
#include <svx/svdview.hxx>
#include <svx/unoshape.hxx>
#include <dcontact.hxx>
#include <svx/fmglob.hxx>
#include <fmtornt.hxx>
#include <fmtsrnd.hxx>
#include <fmtfollowtextflow.hxx>
#include <rootfrm.hxx>
#include <editeng/lrspitem.hxx>
#include <editeng/ulspitem.hxx>
#include <o3tl/any.hxx>
#include <svx/shapepropertynotifier.hxx>
#include <crstate.hxx>
#include <comphelper/extract.hxx>
#include <comphelper/profilezone.hxx>
#include <cppuhelper/supportsservice.hxx>
#include <svx/scene3d.hxx>
#include <com/sun/star/drawing/XDrawPageSupplier.hpp>
#include <fmtwrapinfluenceonobjpos.hxx>
#include <com/sun/star/text/TextContentAnchorType.hpp>
#include <basegfx/matrix/b2dhommatrixtools.hxx>
#include <com/sun/star/drawing/PointSequence.hpp>
#include <com/sun/star/lang/IndexOutOfBoundsException.hpp>
#include <calbck.hxx>
using namespace ::com::sun::star;
class SwShapeDescriptor_Impl
{
bool m_isInReading;
std::unique_ptr<SwFormatHoriOrient> m_pHOrient;
std::unique_ptr<SwFormatVertOrient> m_pVOrient;
std::unique_ptr<SwFormatAnchor> m_pAnchor;
std::unique_ptr<SwFormatSurround> m_pSurround;
std::unique_ptr<SvxULSpaceItem> m_pULSpace;
std::unique_ptr<SvxLRSpaceItem> m_pLRSpace;
bool bOpaque;
uno::Reference< text::XTextRange > xTextRange;
// #i26791#
std::unique_ptr<SwFormatFollowTextFlow> m_pFollowTextFlow;
// #i28701#
std::unique_ptr<SwFormatWrapInfluenceOnObjPos> m_pWrapInfluenceOnObjPos;
// #i28749#
sal_Int16 mnPositionLayoutDir;
SwShapeDescriptor_Impl(const SwShapeDescriptor_Impl&) = delete;
SwShapeDescriptor_Impl& operator=(const SwShapeDescriptor_Impl&) = delete;
public:
bool bInitializedPropertyNotifier;
public:
SwShapeDescriptor_Impl(SwDoc const*const pDoc)
: m_isInReading(pDoc && pDoc->IsInReading())
// #i32349# - no defaults, in order to determine on
// adding a shape, if positioning attributes are set or not.
, bOpaque(false)
// #i26791#
, m_pFollowTextFlow( new SwFormatFollowTextFlow(false) )
// #i28701# #i35017#
, m_pWrapInfluenceOnObjPos( new SwFormatWrapInfluenceOnObjPos(
text::WrapInfluenceOnPosition::ONCE_CONCURRENT) )
// #i28749#
, mnPositionLayoutDir(text::PositionLayoutDir::PositionInLayoutDirOfAnchor)
, bInitializedPropertyNotifier(false)
{}
SwFormatAnchor* GetAnchor(bool bCreate = false)
{
if (bCreate && !m_pAnchor)
{
m_pAnchor.reset(new SwFormatAnchor(RndStdIds::FLY_AS_CHAR));
}
return m_pAnchor.get();
}
SwFormatHoriOrient* GetHOrient(bool bCreate = false)
{
if (bCreate && !m_pHOrient)
{
// #i26791#
m_pHOrient.reset(new SwFormatHoriOrient(0, text::HoriOrientation::NONE, text::RelOrientation::FRAME));
}
return m_pHOrient.get();
}
SwFormatVertOrient* GetVOrient(bool bCreate = false)
{
if (bCreate && !m_pVOrient)
{
if (m_isInReading && // tdf#113938 extensions might rely on old default
(!GetAnchor(true) || m_pAnchor->GetAnchorId() == RndStdIds::FLY_AS_CHAR))
{ // for as-char, NONE ("from-top") is not a good default
m_pVOrient.reset(new SwFormatVertOrient(0, text::VertOrientation::TOP, text::RelOrientation::FRAME));
}
else
{ // #i26791#
m_pVOrient.reset(new SwFormatVertOrient(0, text::VertOrientation::NONE, text::RelOrientation::FRAME));
}
}
return m_pVOrient.get();
}
SwFormatSurround* GetSurround(bool bCreate = false)
{
if (bCreate && !m_pSurround)
{
m_pSurround.reset(new SwFormatSurround());
}
return m_pSurround.get();
}
SvxLRSpaceItem* GetLRSpace(bool bCreate = false)
{
if (bCreate && !m_pLRSpace)
{
m_pLRSpace.reset(new SvxLRSpaceItem(RES_LR_SPACE));
}
return m_pLRSpace.get();
}
SvxULSpaceItem* GetULSpace(bool bCreate = false)
{
if (bCreate && !m_pULSpace)
{
m_pULSpace.reset(new SvxULSpaceItem(RES_UL_SPACE));
}
return m_pULSpace.get();
}
uno::Reference< text::XTextRange > & GetTextRange()
{
return xTextRange;
}
bool IsOpaque() const
{
return bOpaque;
}
const bool& GetOpaque() const
{
return bOpaque;
}
void RemoveHOrient() { m_pHOrient.reset(); }
void RemoveVOrient() { m_pVOrient.reset(); }
void RemoveAnchor() { m_pAnchor.reset(); }
void RemoveSurround() { m_pSurround.reset(); }
void RemoveULSpace() { m_pULSpace.reset(); }
void RemoveLRSpace() { m_pLRSpace.reset(); }
void SetOpaque(bool bSet){bOpaque = bSet;}
// #i26791#
SwFormatFollowTextFlow* GetFollowTextFlow( bool _bCreate = false )
{
if (_bCreate && !m_pFollowTextFlow)
{
m_pFollowTextFlow.reset(new SwFormatFollowTextFlow(false));
}
return m_pFollowTextFlow.get();
}
void RemoveFollowTextFlow()
{
m_pFollowTextFlow.reset();
}
// #i28749#
sal_Int16 GetPositionLayoutDir() const
{
return mnPositionLayoutDir;
}
void SetPositionLayoutDir( sal_Int16 _nPositionLayoutDir )
{
switch ( _nPositionLayoutDir )
{
case text::PositionLayoutDir::PositionInHoriL2R:
case text::PositionLayoutDir::PositionInLayoutDirOfAnchor:
{
mnPositionLayoutDir = _nPositionLayoutDir;
}
break;
default:
{
OSL_FAIL( "<SwShapeDescriptor_Impl::SetPositionLayoutDir(..)> - invalid attribute value." );
}
}
}
// #i28701#
SwFormatWrapInfluenceOnObjPos* GetWrapInfluenceOnObjPos(
const bool _bCreate = false )
{
if (_bCreate && !m_pWrapInfluenceOnObjPos)
{
m_pWrapInfluenceOnObjPos.reset(new SwFormatWrapInfluenceOnObjPos(
// #i35017#
text::WrapInfluenceOnPosition::ONCE_CONCURRENT));
}
return m_pWrapInfluenceOnObjPos.get();
}
void RemoveWrapInfluenceOnObjPos()
{
m_pWrapInfluenceOnObjPos.reset();
}
};
SwFmDrawPage::SwFmDrawPage( SdrPage* pPage ) :
SvxFmDrawPage( pPage ), pPageView(nullptr)
{
}
SwFmDrawPage::~SwFmDrawPage() throw ()
{
RemovePageView();
}
const SdrMarkList& SwFmDrawPage::PreGroup(const uno::Reference< drawing::XShapes > & xShapes)
{
SelectObjectsInView( xShapes, GetPageView() );
const SdrMarkList& rMarkList = mpView->GetMarkedObjectList();
return rMarkList;
}
void SwFmDrawPage::PreUnGroup(const uno::Reference< drawing::XShapeGroup >& rShapeGroup)
{
uno::Reference< drawing::XShape > xShape( rShapeGroup, uno::UNO_QUERY);
SelectObjectInView( xShape, GetPageView() );
}
SdrPageView* SwFmDrawPage::GetPageView()
{
if(!pPageView)
pPageView = mpView->ShowSdrPage( mpPage );
return pPageView;
}
void SwFmDrawPage::RemovePageView()
{
if(pPageView && mpView)
mpView->HideSdrPage();
pPageView = nullptr;
}
uno::Reference< uno::XInterface > SwFmDrawPage::GetInterface( SdrObject* pObj )
{
uno::Reference< XInterface > xShape;
if( pObj )
{
SwFrameFormat* pFormat = ::FindFrameFormat( pObj );
SwIterator<SwXShape,SwFormat> aIter(*pFormat);
SwXShape* pxShape = aIter.First();
if (pxShape)
{
//tdf#113615 when mapping from SdrObject to XShape via
//SwFrameFormat check all the SdrObjects belonging to this
//SwFrameFormat to find the right one. In the case of Grouped
//objects there can be both the group and the elements of the group
//registered here so the first one isn't necessarily the right one
while (SwXShape* pNext = aIter.Next())
{
SvxShape* pSvxShape = pNext->GetSvxShape();
if (pSvxShape && pSvxShape->GetSdrObject() == pObj)
{
pxShape = pNext;
break;
}
}
xShape = *static_cast<cppu::OWeakObject*>(pxShape);
}
else
xShape = pObj->getUnoShape();
}
return xShape;
}
uno::Reference< drawing::XShape > SwFmDrawPage::CreateShape( SdrObject *pObj ) const
{
uno::Reference< drawing::XShape > xRet;
if(dynamic_cast<const SwVirtFlyDrawObj*>( pObj) != nullptr || pObj->GetObjInventor() == SdrInventor::Swg)
{
SwFlyDrawContact* pFlyContact = static_cast<SwFlyDrawContact*>(pObj->GetUserCall());
if(pFlyContact)
{
SwFrameFormat* pFlyFormat = pFlyContact->GetFormat();
SwDoc* pDoc = pFlyFormat->GetDoc();
const SwNodeIndex* pIdx;
if( RES_FLYFRMFMT == pFlyFormat->Which()
&& nullptr != ( pIdx = pFlyFormat->GetContent().GetContentIdx() )
&& pIdx->GetNodes().IsDocNodes()
)
{
const SwNode* pNd = pDoc->GetNodes()[ pIdx->GetIndex() + 1 ];
if(!pNd->IsNoTextNode())
{
xRet.set(SwXTextFrame::CreateXTextFrame(*pDoc, pFlyFormat),
uno::UNO_QUERY);
}
else if( pNd->IsGrfNode() )
{
xRet.set(SwXTextGraphicObject::CreateXTextGraphicObject(
*pDoc, pFlyFormat), uno::UNO_QUERY);
}
else if( pNd->IsOLENode() )
{
xRet.set(SwXTextEmbeddedObject::CreateXTextEmbeddedObject(
*pDoc, pFlyFormat), uno::UNO_QUERY);
}
}
else
{
OSL_FAIL( "<SwFmDrawPage::CreateShape(..)> - could not retrieve type. Thus, no shape created." );
return xRet;
}
}
}
else
{
// own block - temporary object has to be destroyed before
// the delegator is set #81670#
{
xRet = SvxFmDrawPage::CreateShape( pObj );
}
uno::Reference< XUnoTunnel > xShapeTunnel(xRet, uno::UNO_QUERY);
//don't create an SwXShape if it already exists
SwXShape* pShape = nullptr;
if(xShapeTunnel.is())
pShape = reinterpret_cast< SwXShape * >(
sal::static_int_cast< sal_IntPtr >( xShapeTunnel->getSomething(SwXShape::getUnoTunnelId()) ));
if(!pShape)
{
xShapeTunnel = nullptr;
uno::Reference< uno::XInterface > xCreate(xRet, uno::UNO_QUERY);
xRet = nullptr;
uno::Reference< beans::XPropertySet > xPrSet;
if ( pObj->IsGroupObject() && (!pObj->Is3DObj() || (dynamic_cast<const E3dScene*>( pObj) != nullptr)) )
xPrSet = new SwXGroupShape(xCreate, nullptr);
else
xPrSet = new SwXShape(xCreate, nullptr);
xRet.set(xPrSet, uno::UNO_QUERY);
}
}
return xRet;
}
namespace
{
class SwXShapesEnumeration
: public SwSimpleEnumeration_Base
{
private:
typedef std::list< css::uno::Any > shapescontainer_t;
shapescontainer_t m_aShapes;
protected:
virtual ~SwXShapesEnumeration() override {};
public:
explicit SwXShapesEnumeration(SwXDrawPage* const pDrawPage);
//XEnumeration
virtual sal_Bool SAL_CALL hasMoreElements() override;
virtual uno::Any SAL_CALL nextElement() override;
//XServiceInfo
virtual OUString SAL_CALL getImplementationName() override;
virtual sal_Bool SAL_CALL supportsService(const OUString& ServiceName) override;
virtual uno::Sequence<OUString> SAL_CALL getSupportedServiceNames() override;
};
}
SwXShapesEnumeration::SwXShapesEnumeration(SwXDrawPage* const pDrawPage)
: m_aShapes()
{
SolarMutexGuard aGuard;
std::insert_iterator<shapescontainer_t> pInserter = std::insert_iterator<shapescontainer_t>(m_aShapes, m_aShapes.begin());
sal_Int32 nCount = pDrawPage->getCount();
for(sal_Int32 nIdx = 0; nIdx < nCount; nIdx++)
{
uno::Reference<drawing::XShape> xShape(pDrawPage->getByIndex(nIdx), uno::UNO_QUERY);
*pInserter++ = uno::makeAny(xShape);
}
}
sal_Bool SwXShapesEnumeration::hasMoreElements()
{
SolarMutexGuard aGuard;
return !m_aShapes.empty();
}
uno::Any SwXShapesEnumeration::nextElement()
{
SolarMutexGuard aGuard;
if(m_aShapes.empty())
throw container::NoSuchElementException();
uno::Any aResult = *m_aShapes.begin();
m_aShapes.pop_front();
return aResult;
}
OUString SwXShapesEnumeration::getImplementationName()
{
return OUString("SwXShapeEnumeration");
}
sal_Bool SwXShapesEnumeration::supportsService(const OUString& ServiceName)
{
return cppu::supportsService(this, ServiceName);
}
uno::Sequence< OUString > SwXShapesEnumeration::getSupportedServiceNames()
{
return { OUString("com.sun.star.container.XEnumeration") };
}
uno::Reference< container::XEnumeration > SwXDrawPage::createEnumeration()
{
SolarMutexGuard aGuard;
return uno::Reference< container::XEnumeration >(
new SwXShapesEnumeration(this));
}
OUString SwXDrawPage::getImplementationName()
{
return OUString("SwXDrawPage");
}
sal_Bool SwXDrawPage::supportsService(const OUString& rServiceName)
{
return cppu::supportsService(this, rServiceName);
}
uno::Sequence< OUString > SwXDrawPage::getSupportedServiceNames()
{
uno::Sequence<OUString> aRet { "com.sun.star.drawing.GenericDrawPage" };
return aRet;
}
SwXDrawPage::SwXDrawPage(SwDoc* pDc) :
pDoc(pDc),
pDrawPage(nullptr)
{
}
SwXDrawPage::~SwXDrawPage()
{
if(xPageAgg.is())
{
uno::Reference< uno::XInterface > xInt;
xPageAgg->setDelegator(xInt);
}
}
uno::Any SwXDrawPage::queryInterface( const uno::Type& aType )
{
uno::Any aRet = SwXDrawPageBaseClass::queryInterface(aType);
if(!aRet.hasValue())
{
// secure with checking if page exists. This may not be the case
// either for new SW docs with no yet graphics usage or when
// the doc is closed and someone else still holds a UNO reference
// to the XDrawPage (in that case, pDoc is set to 0)
SwFmDrawPage* pPage = GetSvxPage();
if(pPage)
{
aRet = pPage->queryAggregation(aType);
}
}
return aRet;
}
uno::Sequence< uno::Type > SwXDrawPage::getTypes()
{
uno::Sequence< uno::Type > aPageTypes = SwXDrawPageBaseClass::getTypes();
uno::Sequence< uno::Type > aSvxTypes = GetSvxPage()->getTypes();
long nIndex = aPageTypes.getLength();
aPageTypes.realloc(aPageTypes.getLength() + aSvxTypes.getLength() + 1);
uno::Type* pPageTypes = aPageTypes.getArray();
const uno::Type* pSvxTypes = aSvxTypes.getConstArray();
long nPos;
for(nPos = 0; nPos < aSvxTypes.getLength(); nPos++)
{
pPageTypes[nIndex++] = pSvxTypes[nPos];
}
pPageTypes[nIndex] = cppu::UnoType<form::XFormsSupplier2>::get();
return aPageTypes;
}
sal_Int32 SwXDrawPage::getCount()
{
SolarMutexGuard aGuard;
if(!pDoc)
throw uno::RuntimeException();
if(!pDoc->getIDocumentDrawModelAccess().GetDrawModel())
return 0;
else
{
GetSvxPage();
return SwTextBoxHelper::getCount(pDrawPage->GetSdrPage());
}
}
uno::Any SwXDrawPage::getByIndex(sal_Int32 nIndex)
{
SolarMutexGuard aGuard;
if(!pDoc)
throw uno::RuntimeException();
if(!pDoc->getIDocumentDrawModelAccess().GetDrawModel())
throw lang::IndexOutOfBoundsException();
GetSvxPage();
return SwTextBoxHelper::getByIndex(pDrawPage->GetSdrPage(), nIndex);
}
uno::Type SwXDrawPage::getElementType()
{
return cppu::UnoType<drawing::XShape>::get();
}
sal_Bool SwXDrawPage::hasElements()
{
SolarMutexGuard aGuard;
if(!pDoc)
throw uno::RuntimeException();
if(!pDoc->getIDocumentDrawModelAccess().GetDrawModel())
return false;
else
return GetSvxPage()->hasElements();
}
void SwXDrawPage::add(const uno::Reference< drawing::XShape > & xShape)
{
SolarMutexGuard aGuard;
if(!pDoc)
throw uno::RuntimeException();
uno::Reference< lang::XUnoTunnel > xShapeTunnel(xShape, uno::UNO_QUERY);
SwXShape* pShape = nullptr;
SvxShape* pSvxShape = nullptr;
if(xShapeTunnel.is())
{
pShape = reinterpret_cast< SwXShape * >(
sal::static_int_cast< sal_IntPtr >( xShapeTunnel->getSomething(SwXShape::getUnoTunnelId()) ));
pSvxShape = reinterpret_cast< SvxShape * >(
sal::static_int_cast< sal_IntPtr >( xShapeTunnel->getSomething(SvxShape::getUnoTunnelId()) ));
}
if(!pShape || pShape->GetRegisteredIn() || !pShape->m_bDescriptor )
{
uno::RuntimeException aExcept;
if(pShape)
aExcept.Message = "object already inserted";
else
aExcept.Message = "illegal object";
throw aExcept;
}
if ( pSvxShape->GetSdrObject() )
{
if ( pSvxShape->GetSdrObject()->IsInserted() )
{
return;
}
}
GetSvxPage()->add(xShape);
OSL_ENSURE(pSvxShape, "Why is here no SvxShape?");
// this position is definitely in 1/100 mm
awt::Point aMM100Pos(pSvxShape->getPosition());
// now evaluate the properties of SwShapeDescriptor_Impl
SwShapeDescriptor_Impl* pDesc = pShape->GetDescImpl();
SfxItemSet aSet( pDoc->GetAttrPool(), svl::Items<RES_FRMATR_BEGIN,
RES_FRMATR_END-1>{} );
SwFormatAnchor aAnchor( RndStdIds::FLY_AS_CHAR );
bool bOpaque = false;
if( pDesc )
{
if(pDesc->GetSurround())
aSet.Put( *pDesc->GetSurround());
// all items are already in Twip
if(pDesc->GetLRSpace())
{
aSet.Put(*pDesc->GetLRSpace());
}
if(pDesc->GetULSpace())
{
aSet.Put(*pDesc->GetULSpace());
}
if(pDesc->GetAnchor())
aAnchor = *pDesc->GetAnchor();
// #i32349# - if no horizontal position exists, create one
if ( !pDesc->GetHOrient() )
{
SwFormatHoriOrient* pHori = pDesc->GetHOrient( true );
SwTwips nHoriPos = convertMm100ToTwip(aMM100Pos.X);
pHori->SetPos( nHoriPos );
}
{
if(pDesc->GetHOrient()->GetHoriOrient() == text::HoriOrientation::NONE)
aMM100Pos.X = convertTwipToMm100(pDesc->GetHOrient()->GetPos());
aSet.Put( *pDesc->GetHOrient() );
}
// #i32349# - if no vertical position exists, create one
if ( !pDesc->GetVOrient() )
{
SwFormatVertOrient* pVert = pDesc->GetVOrient( true );
SwTwips nVertPos = convertMm100ToTwip(aMM100Pos.Y);
pVert->SetPos( nVertPos );
}
{
if(pDesc->GetVOrient()->GetVertOrient() == text::VertOrientation::NONE)
aMM100Pos.Y = convertTwipToMm100(pDesc->GetVOrient()->GetPos());
aSet.Put( *pDesc->GetVOrient() );
}
if(pDesc->GetSurround())
aSet.Put( *pDesc->GetSurround());
bOpaque = pDesc->IsOpaque();
// #i26791#
if ( pDesc->GetFollowTextFlow() )
{
aSet.Put( *pDesc->GetFollowTextFlow() );
}
// #i28701#
if ( pDesc->GetWrapInfluenceOnObjPos() )
{
aSet.Put( *pDesc->GetWrapInfluenceOnObjPos() );
}
}
pSvxShape->setPosition(aMM100Pos);
SdrObject* pObj = pSvxShape->GetSdrObject();
// #108784# - set layer of new drawing object to corresponding
// invisible layer.
if(SdrInventor::FmForm != pObj->GetObjInventor())
pObj->SetLayer( bOpaque ? pDoc->getIDocumentDrawModelAccess().GetInvisibleHeavenId() : pDoc->getIDocumentDrawModelAccess().GetInvisibleHellId() );
else
pObj->SetLayer(pDoc->getIDocumentDrawModelAccess().GetInvisibleControlsId());
SwPaM* pPam = new SwPaM(pDoc->GetNodes().GetEndOfContent());
SwUnoInternalPaM* pInternalPam = nullptr;
uno::Reference< text::XTextRange > xRg;
if( pDesc && (xRg = pDesc->GetTextRange()).is() )
{
pInternalPam = new SwUnoInternalPaM(*pDoc);
if (!::sw::XTextRangeToSwPaM(*pInternalPam, xRg))
throw uno::RuntimeException();
if(RndStdIds::FLY_AT_FLY == aAnchor.GetAnchorId() &&
!pInternalPam->GetNode().FindFlyStartNode())
{
aAnchor.SetType(RndStdIds::FLY_AS_CHAR);
}
else if (RndStdIds::FLY_AT_PAGE == aAnchor.GetAnchorId())
{
aAnchor.SetAnchor(pInternalPam->Start());
}
}
else if ((aAnchor.GetAnchorId() != RndStdIds::FLY_AT_PAGE) && pDoc->getIDocumentLayoutAccess().GetCurrentLayout())
{
SwCursorMoveState aState( MV_SETONLYTEXT );
Point aTmp(convertMm100ToTwip(aMM100Pos.X), convertMm100ToTwip(aMM100Pos.Y));
pDoc->getIDocumentLayoutAccess().GetCurrentLayout()->GetCursorOfst( pPam->GetPoint(), aTmp, &aState );
aAnchor.SetAnchor( pPam->GetPoint() );
// #i32349# - adjustment of vertical positioning
// attributes no longer needed, because it's already got a default.
}
else
{
aAnchor.SetType(RndStdIds::FLY_AT_PAGE);
// #i32349# - adjustment of vertical positioning
// attributes no longer needed, because it's already got a default.
}
aSet.Put(aAnchor);
SwPaM* pTemp = pInternalPam;
if ( !pTemp )
pTemp = pPam;
UnoActionContext aAction(pDoc);
pDoc->getIDocumentContentOperations().InsertDrawObj( *pTemp, *pObj, aSet );
SwFrameFormat* pFormat = ::FindFrameFormat( pObj );
if(pFormat)
pFormat->Add(pShape);
pShape->m_bDescriptor = false;
delete pPam;
delete pInternalPam;
}
void SwXDrawPage::remove(const uno::Reference< drawing::XShape > & xShape)
{
SolarMutexGuard aGuard;
if(!pDoc)
throw uno::RuntimeException();
uno::Reference<lang::XComponent> xComp(xShape, uno::UNO_QUERY);
xComp->dispose();
}
uno::Reference< drawing::XShapeGroup > SwXDrawPage::group(const uno::Reference< drawing::XShapes > & xShapes)
{
SolarMutexGuard aGuard;
if(!pDoc || !xShapes.is())
throw uno::RuntimeException();
uno::Reference< drawing::XShapeGroup > xRet;
if(xPageAgg.is())
{
SwFmDrawPage* pPage = GetSvxPage();
if(pPage) //TODO: can this be Null?
{
// mark and return MarkList
const SdrMarkList& rMarkList = pPage->PreGroup(xShapes);
if ( rMarkList.GetMarkCount() > 1 )
{
bool bFlyInCnt = false;
for ( size_t i = 0; !bFlyInCnt && i < rMarkList.GetMarkCount(); ++i )
{
const SdrObject *pObj = rMarkList.GetMark( i )->GetMarkedSdrObj();
if (RndStdIds::FLY_AS_CHAR == ::FindFrameFormat(const_cast<SdrObject*>(
pObj))->GetAnchor().GetAnchorId())
{
bFlyInCnt = true;
}
}
if( bFlyInCnt )
throw uno::RuntimeException();
if( !bFlyInCnt )
{
UnoActionContext aContext(pDoc);
pDoc->GetIDocumentUndoRedo().StartUndo( SwUndoId::START, nullptr );
SwDrawContact* pContact = pDoc->GroupSelection( *pPage->GetDrawView() );
pDoc->ChgAnchor(
pPage->GetDrawView()->GetMarkedObjectList(),
RndStdIds::FLY_AT_PARA,
true, false );
pPage->GetDrawView()->UnmarkAll();
if(pContact)
{
uno::Reference< uno::XInterface > xInt = SwFmDrawPage::GetInterface( pContact->GetMaster() );
xRet.set(xInt, uno::UNO_QUERY);
}
pDoc->GetIDocumentUndoRedo().EndUndo( SwUndoId::END, nullptr );
}
}
pPage->RemovePageView();
}
}
return xRet;
}
void SwXDrawPage::ungroup(const uno::Reference< drawing::XShapeGroup > & rShapeGroup)
{
SolarMutexGuard aGuard;
if(!pDoc)
throw uno::RuntimeException();
if(xPageAgg.is())
{
SwFmDrawPage* pPage = GetSvxPage();
if(pPage) //TODO: can this be Null?
{
pPage->PreUnGroup(rShapeGroup);
UnoActionContext aContext(pDoc);
pDoc->GetIDocumentUndoRedo().StartUndo( SwUndoId::START, nullptr );
pDoc->UnGroupSelection( *pPage->GetDrawView() );
pDoc->ChgAnchor( pPage->GetDrawView()->GetMarkedObjectList(),
RndStdIds::FLY_AT_PARA,
true, false );
pDoc->GetIDocumentUndoRedo().EndUndo( SwUndoId::END, nullptr );
pPage->RemovePageView();
}
}
}
SwFmDrawPage* SwXDrawPage::GetSvxPage()
{
if(!xPageAgg.is() && pDoc)
{
SolarMutexGuard aGuard;
// #i52858#
SwDrawModel* pModel = pDoc->getIDocumentDrawModelAccess().GetOrCreateDrawModel();
SdrPage* pPage = pModel->GetPage( 0 );
{
// We need a Ref to the object during queryInterface or else
// it will be deleted
pDrawPage = new SwFmDrawPage(pPage);
uno::Reference< drawing::XDrawPage > xPage = pDrawPage;
uno::Any aAgg = xPage->queryInterface(cppu::UnoType<uno::XAggregation>::get());
aAgg >>= xPageAgg;
}
if( xPageAgg.is() )
xPageAgg->setDelegator( static_cast<cppu::OWeakObject*>(this) );
}
return pDrawPage;
}
/**
* Renamed and outlined to detect where it's called
*/
void SwXDrawPage::InvalidateSwDoc()
{
pDoc = nullptr;
}
namespace
{
class theSwXShapeUnoTunnelId : public rtl::Static< UnoTunnelIdInit, theSwXShapeUnoTunnelId > {};
}
const uno::Sequence< sal_Int8 > & SwXShape::getUnoTunnelId()
{
return theSwXShapeUnoTunnelId::get().getSeq();
}
sal_Int64 SAL_CALL SwXShape::getSomething( const uno::Sequence< sal_Int8 >& rId )
{
if( rId.getLength() == 16
&& 0 == memcmp( getUnoTunnelId().getConstArray(),
rId.getConstArray(), 16 ) )
{
return sal::static_int_cast< sal_Int64 >( reinterpret_cast< sal_IntPtr >(this) );
}
if( xShapeAgg.is() )
{
const uno::Type& rTunnelType = cppu::UnoType<lang::XUnoTunnel>::get();
uno::Any aAgg = xShapeAgg->queryAggregation( rTunnelType );
if(auto xAggTunnel = o3tl::tryAccess<uno::Reference<lang::XUnoTunnel>>(
aAgg))
{
if(xAggTunnel->is())
return (*xAggTunnel)->getSomething(rId);
}
}
return 0;
}
namespace
{
void lcl_addShapePropertyEventFactories( SdrObject& _rObj, SwXShape& _rShape )
{
std::shared_ptr<svx::IPropertyValueProvider> pProvider( new svx::PropertyValueProvider( _rShape, "AnchorType" ) );
_rObj.getShapePropertyChangeNotifier().registerProvider( svx::ShapeProperty::TextDocAnchor, pProvider );
}
}
SwXShape::SwXShape(uno::Reference<uno::XInterface> & xShape,
SwDoc const*const pDoc)
:
m_pPropSet(aSwMapProvider.GetPropertySet(PROPERTY_MAP_TEXT_SHAPE)),
m_pPropertyMapEntries(aSwMapProvider.GetPropertyMapEntries(PROPERTY_MAP_TEXT_SHAPE)),
pImpl(new SwShapeDescriptor_Impl(pDoc)),
m_bDescriptor(true)
{
if(!xShape.is()) // default Ctor
return;
const uno::Type& rAggType = cppu::UnoType<uno::XAggregation>::get();
//aAgg contains a reference of the SvxShape!
{
uno::Any aAgg = xShape->queryInterface(rAggType);
aAgg >>= xShapeAgg;
// #i31698#
if ( xShapeAgg.is() )
{
xShapeAgg->queryAggregation( cppu::UnoType<drawing::XShape>::get()) >>= mxShape;
OSL_ENSURE( mxShape.is(),
"<SwXShape::SwXShape(..)> - no XShape found at <xShapeAgg>" );
}
}
xShape = nullptr;
m_refCount++;
if( xShapeAgg.is() )
xShapeAgg->setDelegator( static_cast<cppu::OWeakObject*>(this) );
m_refCount--;
uno::Reference< lang::XUnoTunnel > xShapeTunnel(xShapeAgg, uno::UNO_QUERY);
SvxShape* pShape = nullptr;
if(xShapeTunnel.is())
pShape = reinterpret_cast< SvxShape * >(
sal::static_int_cast< sal_IntPtr >( xShapeTunnel->getSomething(SvxShape::getUnoTunnelId()) ));
SdrObject* pObj = pShape ? pShape->GetSdrObject() : nullptr;
if(pObj)
{
SwFrameFormat* pFormat = ::FindFrameFormat( pObj );
if(pFormat)
pFormat->Add(this);
lcl_addShapePropertyEventFactories( *pObj, *this );
pImpl->bInitializedPropertyNotifier = true;
}
}
void SwXShape::AddExistingShapeToFormat( SdrObject const & _rObj )
{
SdrObjListIter aIter( _rObj, SdrIterMode::DeepNoGroups );
while ( aIter.IsMore() )
{
SdrObject* pCurrent = aIter.Next();
OSL_ENSURE( pCurrent, "SwXShape::AddExistingShapeToFormat: invalid object list element!" );
if ( !pCurrent )
continue;
SwXShape* pSwShape = nullptr;
uno::Reference< lang::XUnoTunnel > xShapeTunnel( pCurrent->getWeakUnoShape(), uno::UNO_QUERY );
if ( xShapeTunnel.is() )
pSwShape = reinterpret_cast< SwXShape * >(
sal::static_int_cast< sal_IntPtr >( xShapeTunnel->getSomething( SwXShape::getUnoTunnelId() ) ) );
if ( pSwShape )
{
if ( pSwShape->m_bDescriptor )
{
SwFrameFormat* pFormat = ::FindFrameFormat( pCurrent );
if ( pFormat )
pFormat->Add( pSwShape );
pSwShape->m_bDescriptor = false;
}
if ( !pSwShape->pImpl->bInitializedPropertyNotifier )
{
lcl_addShapePropertyEventFactories( *pCurrent, *pSwShape );
pSwShape->pImpl->bInitializedPropertyNotifier = true;
}
}
}
}
SwXShape::~SwXShape()
{
SolarMutexGuard aGuard;
if (xShapeAgg.is())
{
uno::Reference< uno::XInterface > xRef;
xShapeAgg->setDelegator(xRef);
}
pImpl.reset();
EndListeningAll();
}
uno::Any SwXShape::queryInterface( const uno::Type& aType )
{
uno::Any aRet = SwTextBoxHelper::queryInterface(GetFrameFormat(), aType);
if (aRet.hasValue())
return aRet;
aRet = SwXShapeBaseClass::queryInterface(aType);
// #i53320# - follow-up of #i31698#
// interface drawing::XShape is overloaded. Thus, provide
// correct object instance.
if(!aRet.hasValue() && xShapeAgg.is())
{
if(aType == cppu::UnoType<XShape>::get())
aRet <<= uno::Reference<XShape>(this);
else
aRet = xShapeAgg->queryAggregation(aType);
}
return aRet;
}
uno::Sequence< uno::Type > SwXShape::getTypes( )
{
uno::Sequence< uno::Type > aRet = SwXShapeBaseClass::getTypes();
if(xShapeAgg.is())
{
uno::Any aProv = xShapeAgg->queryAggregation(cppu::UnoType<XTypeProvider>::get());
if(aProv.hasValue())
{
uno::Reference< XTypeProvider > xAggProv;
aProv >>= xAggProv;
uno::Sequence< uno::Type > aAggTypes = xAggProv->getTypes();
const uno::Type* pAggTypes = aAggTypes.getConstArray();
long nIndex = aRet.getLength();
aRet.realloc(nIndex + aAggTypes.getLength());
uno::Type* pBaseTypes = aRet.getArray();
for(long i = 0; i < aAggTypes.getLength(); i++)
pBaseTypes[nIndex++] = pAggTypes[i];
}
}
return aRet;
}
uno::Sequence< sal_Int8 > SwXShape::getImplementationId( )
{
return css::uno::Sequence<sal_Int8>();
}
uno::Reference< beans::XPropertySetInfo > SwXShape::getPropertySetInfo()
{
SolarMutexGuard aGuard;
uno::Reference< beans::XPropertySetInfo > aRet;
if(xShapeAgg.is())
{
const uno::Type& rPropSetType = cppu::UnoType<beans::XPropertySet>::get();
uno::Any aPSet = xShapeAgg->queryAggregation( rPropSetType );
if(auto xPrSet = o3tl::tryAccess<uno::Reference<beans::XPropertySet>>(
aPSet))
{
uno::Reference< beans::XPropertySetInfo > xInfo = (*xPrSet)->getPropertySetInfo();
// Expand PropertySetInfo!
const uno::Sequence<beans::Property> aPropSeq = xInfo->getProperties();
aRet = new SfxExtItemPropertySetInfo( m_pPropertyMapEntries, aPropSeq );
}
}
if(!aRet.is())
aRet = m_pPropSet->getPropertySetInfo();
return aRet;
}
void SwXShape::setPropertyValue(const OUString& rPropertyName, const uno::Any& aValue)
{
SolarMutexGuard aGuard;
SwFrameFormat* pFormat = GetFrameFormat();
const SfxItemPropertySimpleEntry* pEntry = m_pPropSet->getPropertyMap().getByName( rPropertyName );
if(xShapeAgg.is())
{
if(pEntry)
{
if ( pEntry->nFlags & beans::PropertyAttribute::READONLY)
throw beans::PropertyVetoException ("Property is read-only: " + rPropertyName, static_cast < cppu::OWeakObject * > ( this ) );
// with the layout it is possible to move the anchor without changing the position
if(pFormat)
{
SwAttrSet aSet(pFormat->GetAttrSet());
SwDoc* pDoc = pFormat->GetDoc();
if(RES_ANCHOR == pEntry->nWID && MID_ANCHOR_ANCHORFRAME == pEntry->nMemberId)
{
bool bDone = false;
uno::Reference<text::XTextFrame> xFrame;
if(aValue >>= xFrame)
{
uno::Reference<lang::XUnoTunnel> xTunnel(xFrame, uno::UNO_QUERY);
SwXFrame* pFrame = xTunnel.is() ?
reinterpret_cast< SwXFrame * >(
sal::static_int_cast< sal_IntPtr >( xTunnel->getSomething(SwXFrame::getUnoTunnelId()) ))
: nullptr;
if(pFrame && pFrame->GetFrameFormat() &&
pFrame->GetFrameFormat()->GetDoc() == pDoc)
{
UnoActionContext aCtx(pDoc);
SfxItemSet aItemSet( pDoc->GetAttrPool(),
svl::Items<RES_FRMATR_BEGIN, RES_FRMATR_END - 1>{} );
aItemSet.SetParent(&pFormat->GetAttrSet());
SwFormatAnchor aAnchor = static_cast<const SwFormatAnchor&>(aItemSet.Get(pEntry->nWID));
SwPosition aPos(*pFrame->GetFrameFormat()->GetContent().GetContentIdx());
aAnchor.SetAnchor(&aPos);
aAnchor.SetType(RndStdIds::FLY_AT_FLY);
aItemSet.Put(aAnchor);
pFormat->SetFormatAttr(aItemSet);
bDone = true;
}
}
if(!bDone)
throw lang::IllegalArgumentException();
}
else if(RES_OPAQUE == pEntry->nWID)
{
SvxShape* pSvxShape = GetSvxShape();
SAL_WARN_IF(!pSvxShape, "sw.uno", "No SvxShape found!");
if(pSvxShape)
{
SdrObject* pObj = pSvxShape->GetSdrObject();
// set layer of new drawing
// object to corresponding invisible layer.
bool bIsVisible = pDoc->getIDocumentDrawModelAccess().IsVisibleLayerId( pObj->GetLayer() );
if(SdrInventor::FmForm != pObj->GetObjInventor())
{
pObj->SetLayer( *o3tl::doAccess<bool>(aValue)
? ( bIsVisible ? pDoc->getIDocumentDrawModelAccess().GetHeavenId() : pDoc->getIDocumentDrawModelAccess().GetInvisibleHeavenId() )
: ( bIsVisible ? pDoc->getIDocumentDrawModelAccess().GetHellId() : pDoc->getIDocumentDrawModelAccess().GetInvisibleHellId() ));
}
else
{
pObj->SetLayer( bIsVisible ? pDoc->getIDocumentDrawModelAccess().GetControlsId() : pDoc->getIDocumentDrawModelAccess().GetInvisibleControlsId());
}
}
}
// #i26791# - special handling for property FN_TEXT_RANGE
else if ( FN_TEXT_RANGE == pEntry->nWID )
{
SwFormatAnchor aAnchor( aSet.Get( RES_ANCHOR ) );
if (aAnchor.GetAnchorId() == RndStdIds::FLY_AT_PAGE)
{
// set property <TextRange> not valid for to-page anchored shapes
throw lang::IllegalArgumentException();
}
std::unique_ptr<SwUnoInternalPaM> pInternalPam(
new SwUnoInternalPaM( *(pFormat->GetDoc()) ));
uno::Reference< text::XTextRange > xRg;
aValue >>= xRg;
if (!::sw::XTextRangeToSwPaM(*pInternalPam, xRg) )
{
throw uno::RuntimeException();
}
if (aAnchor.GetAnchorId() == RndStdIds::FLY_AS_CHAR)
{
//delete old SwFormatFlyCnt
//With AnchorAsCharacter the current TextAttribute has to be deleted.
//Tbis removes the frame format too.
//To prevent this the connection between format and attribute has to be broken before.
const SwPosition *pPos = aAnchor.GetContentAnchor();
SwTextNode *pTextNode = pPos->nNode.GetNode().GetTextNode();
SAL_WARN_IF( !pTextNode->HasHints(), "sw.uno", "Missing FlyInCnt-Hint." );
const sal_Int32 nIdx = pPos->nContent.GetIndex();
SwTextAttr * const pHint =
pTextNode->GetTextAttrForCharAt(
nIdx, RES_TXTATR_FLYCNT );
assert(pHint && "Missing Hint.");
SAL_WARN_IF( pHint->Which() != RES_TXTATR_FLYCNT,
"sw.uno", "Missing FlyInCnt-Hint." );
SAL_WARN_IF( pHint->GetFlyCnt().GetFrameFormat() != pFormat,
"sw.uno", "Wrong TextFlyCnt-Hint." );
const_cast<SwFormatFlyCnt&>(pHint->GetFlyCnt())
.SetFlyFormat();
//The connection is removed now the attribute can be deleted.
pTextNode->DeleteAttributes( RES_TXTATR_FLYCNT, nIdx );
//create a new one
SwTextNode *pNd = pInternalPam->GetNode().GetTextNode();
SAL_WARN_IF( !pNd, "sw.uno", "Cursor not at TextNode." );
SwFormatFlyCnt aFormat( pFormat );
pNd->InsertItem(aFormat, pInternalPam->GetPoint()
->nContent.GetIndex(), 0 );
}
else
{
aAnchor.SetAnchor( pInternalPam->GetPoint() );
aSet.Put(aAnchor);
pFormat->SetFormatAttr(aSet);
}
}
else if (pEntry->nWID == FN_TEXT_BOX)
{
bool bValue(false);
aValue >>= bValue;
if (bValue)
SwTextBoxHelper::create(pFormat);
else
SwTextBoxHelper::destroy(pFormat);
}
else if (pEntry->nWID == RES_CHAIN)
{
if (pEntry->nMemberId == MID_CHAIN_NEXTNAME || pEntry->nMemberId == MID_CHAIN_PREVNAME)
SwTextBoxHelper::syncProperty(pFormat, pEntry->nWID, pEntry->nMemberId, aValue);
}
// #i28749#
else if ( FN_SHAPE_POSITION_LAYOUT_DIR == pEntry->nWID )
{
sal_Int16 nPositionLayoutDir = 0;
aValue >>= nPositionLayoutDir;
pFormat->SetPositionLayoutDir( nPositionLayoutDir );
}
else if( pDoc->getIDocumentLayoutAccess().GetCurrentLayout())
{
UnoActionContext aCtx(pDoc);
if(RES_ANCHOR == pEntry->nWID && MID_ANCHOR_ANCHORTYPE == pEntry->nMemberId)
{
SdrObject* pObj = pFormat->FindSdrObject();
SdrMarkList aList;
SdrMark aMark(pObj);
aList.InsertEntry(aMark);
sal_Int32 nAnchor = 0;
cppu::enum2int( nAnchor, aValue );
pDoc->ChgAnchor( aList, static_cast<RndStdIds>(nAnchor),
false, true );
}
else
{
m_pPropSet->setPropertyValue(*pEntry, aValue, aSet);
pFormat->SetFormatAttr(aSet);
}
}
else if( RES_FRM_SIZE == pEntry->nWID &&
( pEntry->nMemberId == MID_FRMSIZE_REL_HEIGHT || pEntry->nMemberId == MID_FRMSIZE_REL_WIDTH
|| pEntry->nMemberId == MID_FRMSIZE_REL_HEIGHT_RELATION
|| pEntry->nMemberId == MID_FRMSIZE_REL_WIDTH_RELATION ) )
{
SvxShape* pSvxShape = GetSvxShape();
SAL_WARN_IF(!pSvxShape, "sw.uno", "No SvxShape found!");
if(pSvxShape)
{
SdrObject* pObj = pSvxShape->GetSdrObject();
sal_Int16 nPercent(100);
aValue >>= nPercent;
switch (pEntry->nMemberId)
{
case MID_FRMSIZE_REL_WIDTH:
pObj->SetRelativeWidth( nPercent / 100.0 );
break;
case MID_FRMSIZE_REL_HEIGHT:
pObj->SetRelativeHeight( nPercent / 100.0 );
break;
case MID_FRMSIZE_REL_WIDTH_RELATION:
pObj->SetRelativeWidthRelation(nPercent);
break;
case MID_FRMSIZE_REL_HEIGHT_RELATION:
pObj->SetRelativeHeightRelation(nPercent);
break;
}
}
}
else
{
m_pPropSet->setPropertyValue( *pEntry, aValue, aSet );
if(RES_ANCHOR == pEntry->nWID && MID_ANCHOR_ANCHORTYPE == pEntry->nMemberId)
{
bool bSetAttr = true;
text::TextContentAnchorType eNewAnchor = static_cast<text::TextContentAnchorType>(SWUnoHelper::GetEnumAsInt32( aValue ));
//if old anchor was in_cntnt the related text attribute has to be removed
const SwFormatAnchor& rOldAnchor = pFormat->GetAnchor();
RndStdIds eOldAnchorId = rOldAnchor.GetAnchorId();
SdrObject* pObj = pFormat->FindSdrObject();
SwFrameFormat *pFlyFormat = FindFrameFormat( pObj );
pFlyFormat->DelFrames();
if( text::TextContentAnchorType_AS_CHARACTER != eNewAnchor &&
(RndStdIds::FLY_AS_CHAR == eOldAnchorId))
{
//With AnchorAsCharacter the current TextAttribute has to be deleted.
//Tbis removes the frame format too.
//To prevent this the connection between format and attribute has to be broken before.
const SwPosition *pPos = rOldAnchor.GetContentAnchor();
SwTextNode *pTextNode = pPos->nNode.GetNode().GetTextNode();
SAL_WARN_IF( !pTextNode->HasHints(), "sw.uno", "Missing FlyInCnt-Hint." );
const sal_Int32 nIdx = pPos->nContent.GetIndex();
SwTextAttr * const pHint =
pTextNode->GetTextAttrForCharAt(
nIdx, RES_TXTATR_FLYCNT );
assert(pHint && "Missing Hint.");
SAL_WARN_IF( pHint->Which() != RES_TXTATR_FLYCNT,
"sw.uno", "Missing FlyInCnt-Hint." );
SAL_WARN_IF( pHint->GetFlyCnt().GetFrameFormat() != pFlyFormat,
"sw.uno", "Wrong TextFlyCnt-Hint." );
const_cast<SwFormatFlyCnt&>(pHint->GetFlyCnt())
.SetFlyFormat();
//The connection is removed now the attribute can be deleted.
pTextNode->DeleteAttributes(RES_TXTATR_FLYCNT, nIdx);
}
else if( text::TextContentAnchorType_AT_PAGE != eNewAnchor &&
(RndStdIds::FLY_AT_PAGE == eOldAnchorId))
{
SwFormatAnchor aNewAnchor( dynamic_cast< const SwFormatAnchor& >( aSet.Get( RES_ANCHOR ) ) );
//if the fly has been anchored at page then it needs to be connected
//to the content position
SwPaM aPam(pDoc->GetNodes().GetEndOfContent());
if( pDoc->getIDocumentLayoutAccess().GetCurrentLayout() )
{
SwCursorMoveState aState( MV_SETONLYTEXT );
Point aTmp( pObj->GetSnapRect().TopLeft() );
pDoc->getIDocumentLayoutAccess().GetCurrentLayout()->GetCursorOfst( aPam.GetPoint(), aTmp, &aState );
}
else
{
//without access to the layout the last node of the body will be used as anchor position
aPam.Move( fnMoveBackward, GoInDoc );
}
//anchor position has to be inserted after the text attribute has been inserted
aNewAnchor.SetAnchor( aPam.GetPoint() );
aSet.Put( aNewAnchor );
pFormat->SetFormatAttr(aSet);
bSetAttr = false;
}
if( text::TextContentAnchorType_AS_CHARACTER == eNewAnchor &&
(RndStdIds::FLY_AS_CHAR != eOldAnchorId))
{
SwPaM aPam(pDoc->GetNodes().GetEndOfContent());
if( pDoc->getIDocumentLayoutAccess().GetCurrentLayout() )
{
SwCursorMoveState aState( MV_SETONLYTEXT );
Point aTmp( pObj->GetSnapRect().TopLeft() );
pDoc->getIDocumentLayoutAccess().GetCurrentLayout()->GetCursorOfst( aPam.GetPoint(), aTmp, &aState );
}
else
{
//without access to the layout the last node of the body will be used as anchor position
aPam.Move( fnMoveBackward, GoInDoc );
}
//the RES_TXTATR_FLYCNT needs to be added now
SwTextNode *pNd = aPam.GetNode().GetTextNode();
SAL_WARN_IF( !pNd, "sw.uno", "Cursor is not in a TextNode." );
SwFormatFlyCnt aFormat( pFlyFormat );
pNd->InsertItem(aFormat,
aPam.GetPoint()->nContent.GetIndex(), 0 );
--aPam.GetPoint()->nContent; // InsertItem moved it
SwFormatAnchor aNewAnchor(
dynamic_cast<const SwFormatAnchor&>(
aSet.Get(RES_ANCHOR)));
aNewAnchor.SetAnchor( aPam.GetPoint() );
aSet.Put( aNewAnchor );
}
if( bSetAttr )
pFormat->SetFormatAttr(aSet);
}
else
pFormat->SetFormatAttr(aSet);
}
// We have a pFormat and a pEntry as well: try to sync TextBox property.
SwTextBoxHelper::syncProperty(pFormat, pEntry->nWID, pEntry->nMemberId, aValue);
}
else
{
SfxPoolItem* pItem = nullptr;
switch(pEntry->nWID)
{
case RES_ANCHOR:
pItem = pImpl->GetAnchor(true);
break;
case RES_HORI_ORIENT:
pItem = pImpl->GetHOrient(true);
break;
case RES_VERT_ORIENT:
pItem = pImpl->GetVOrient(true);
break;
case RES_LR_SPACE:
pItem = pImpl->GetLRSpace(true);
break;
case RES_UL_SPACE:
pItem = pImpl->GetULSpace(true);
break;
case RES_SURROUND:
pItem = pImpl->GetSurround(true);
break;
case FN_TEXT_RANGE:
if(auto tr = o3tl::tryAccess<
uno::Reference<text::XTextRange>>(aValue))
{
uno::Reference< text::XTextRange > & rRange = pImpl->GetTextRange();
rRange = *tr;
}
break;
case RES_OPAQUE :
pImpl->SetOpaque(*o3tl::doAccess<bool>(aValue));
break;
// #i26791#
case RES_FOLLOW_TEXT_FLOW:
{
pItem = pImpl->GetFollowTextFlow( true );
}
break;
// #i28701#
case RES_WRAP_INFLUENCE_ON_OBJPOS:
{
pItem = pImpl->GetWrapInfluenceOnObjPos( true );
}
break;
// #i28749#
case FN_SHAPE_POSITION_LAYOUT_DIR :
{
sal_Int16 nPositionLayoutDir = 0;
aValue >>= nPositionLayoutDir;
pImpl->SetPositionLayoutDir( nPositionLayoutDir );
}
break;
}
if(pItem)
pItem->PutValue(aValue, pEntry->nMemberId);
}
}
else
{
const uno::Type& rPSetType =
cppu::UnoType<beans::XPropertySet>::get();
uno::Any aPSet = xShapeAgg->queryAggregation(rPSetType);
auto xPrSet = o3tl::tryAccess<uno::Reference<beans::XPropertySet>>(
aPSet);
if(!xPrSet)
throw uno::RuntimeException();
// #i31698# - setting the caption point of a
// caption object doesn't have to change the object position.
// Thus, keep the position, before the caption point is set and
// restore it afterwards.
awt::Point aKeepedPosition( 0, 0 );
if ( rPropertyName == "CaptionPoint" && getShapeType() == "com.sun.star.drawing.CaptionShape" )
{
aKeepedPosition = getPosition();
}
if( pFormat && pFormat->GetDoc()->getIDocumentLayoutAccess().GetCurrentViewShell() )
{
UnoActionContext aCtx(pFormat->GetDoc());
(*xPrSet)->setPropertyValue(rPropertyName, aValue);
}
else
(*xPrSet)->setPropertyValue(rPropertyName, aValue);
if (pFormat)
{
// We have a pFormat (but no pEntry): try to sync TextBox property.
SwTextBoxHelper::syncProperty(pFormat, rPropertyName, aValue);
}
// #i31698# - restore object position, if caption point is set.
if ( rPropertyName == "CaptionPoint" && getShapeType() == "com.sun.star.drawing.CaptionShape" )
{
setPosition( aKeepedPosition );
}
}
}
}
uno::Any SwXShape::getPropertyValue(const OUString& rPropertyName)
{
SolarMutexGuard aGuard;
uno::Any aRet;
SwFrameFormat* pFormat = GetFrameFormat();
if(xShapeAgg.is())
{
const SfxItemPropertySimpleEntry* pEntry = m_pPropSet->getPropertyMap().getByName( rPropertyName );
if(pEntry)
{
if(pFormat)
{
if(RES_OPAQUE == pEntry->nWID)
{
SvxShape* pSvxShape = GetSvxShape();
OSL_ENSURE(pSvxShape, "No SvxShape found!");
if(pSvxShape)
{
SdrObject* pObj = pSvxShape->GetSdrObject();
// consider invisible layers
aRet <<=
( pObj->GetLayer() != pFormat->GetDoc()->getIDocumentDrawModelAccess().GetHellId() &&
pObj->GetLayer() != pFormat->GetDoc()->getIDocumentDrawModelAccess().GetInvisibleHellId() );
}
}
else if(FN_ANCHOR_POSITION == pEntry->nWID)
{
SvxShape* pSvxShape = GetSvxShape();
OSL_ENSURE(pSvxShape, "No SvxShape found!");
if(pSvxShape)
{
SdrObject* pObj = pSvxShape->GetSdrObject();
Point aPt = pObj->GetAnchorPos();
awt::Point aPoint( convertTwipToMm100( aPt.X() ),
convertTwipToMm100( aPt.Y() ) );
aRet <<= aPoint;
}
}
// #i26791# - special handling for FN_TEXT_RANGE
else if ( FN_TEXT_RANGE == pEntry->nWID )
{
const SwFormatAnchor aAnchor = pFormat->GetAnchor();
if (aAnchor.GetAnchorId() == RndStdIds::FLY_AT_PAGE)
{
// return nothing, because property <TextRange> isn't
// valid for to-page anchored shapes
uno::Any aAny;
aRet = aAny;
}
else
{
if ( aAnchor.GetContentAnchor() )
{
const uno::Reference< text::XTextRange > xTextRange
= SwXTextRange::CreateXTextRange(
*pFormat->GetDoc(),
*aAnchor.GetContentAnchor(),
nullptr );
aRet <<= xTextRange;
}
else
{
// return nothing
uno::Any aAny;
aRet = aAny;
}
}
}
else if (pEntry->nWID == FN_TEXT_BOX)
{
bool bValue = SwTextBoxHelper::isTextBox(pFormat, RES_DRAWFRMFMT);
aRet <<= bValue;
}
else if (pEntry->nWID == RES_CHAIN)
{
switch (pEntry->nMemberId)
{
case MID_CHAIN_PREVNAME:
case MID_CHAIN_NEXTNAME:
case MID_CHAIN_NAME:
SwTextBoxHelper::getProperty(pFormat, pEntry->nWID, pEntry->nMemberId, aRet);
break;
}
}
// #i28749#
else if ( FN_SHAPE_TRANSFORMATION_IN_HORI_L2R == pEntry->nWID )
{
// get property <::drawing::Shape::Transformation>
// without conversion to layout direction as below
aRet = _getPropAtAggrObj( "Transformation" );
}
else if ( FN_SHAPE_POSITION_LAYOUT_DIR == pEntry->nWID )
{
aRet <<= pFormat->GetPositionLayoutDir();
}
// #i36248#
else if ( FN_SHAPE_STARTPOSITION_IN_HORI_L2R == pEntry->nWID )
{
// get property <::drawing::Shape::StartPosition>
// without conversion to layout direction as below
aRet = _getPropAtAggrObj( "StartPosition" );
}
else if ( FN_SHAPE_ENDPOSITION_IN_HORI_L2R == pEntry->nWID )
{
// get property <::drawing::Shape::EndPosition>
// without conversion to layout direction as below
aRet = _getPropAtAggrObj( "EndPosition" );
}
else if (pEntry->nWID == RES_FRM_SIZE &&
(pEntry->nMemberId == MID_FRMSIZE_REL_HEIGHT ||
pEntry->nMemberId == MID_FRMSIZE_REL_WIDTH ||
pEntry->nMemberId == MID_FRMSIZE_REL_HEIGHT_RELATION ||
pEntry->nMemberId == MID_FRMSIZE_REL_WIDTH_RELATION))
{
SvxShape* pSvxShape = GetSvxShape();
SAL_WARN_IF(!pSvxShape, "sw.uno", "No SvxShape found!");
sal_Int16 nRet = 0;
if (pSvxShape)
{
SdrObject* pObj = pSvxShape->GetSdrObject();
switch (pEntry->nMemberId)
{
case MID_FRMSIZE_REL_WIDTH:
if (pObj->GetRelativeWidth())
nRet = *pObj->GetRelativeWidth() * 100;
break;
case MID_FRMSIZE_REL_HEIGHT:
if (pObj->GetRelativeHeight())
nRet = *pObj->GetRelativeHeight() * 100;
break;
case MID_FRMSIZE_REL_WIDTH_RELATION:
nRet = pObj->GetRelativeWidthRelation();
break;
case MID_FRMSIZE_REL_HEIGHT_RELATION:
nRet = pObj->GetRelativeHeightRelation();
break;
}
}
aRet <<= nRet;
}
else
{
const SwAttrSet& rSet = pFormat->GetAttrSet();
m_pPropSet->getPropertyValue(*pEntry, rSet, aRet);
}
}
else
{
SfxPoolItem* pItem = nullptr;
switch(pEntry->nWID)
{
case RES_ANCHOR:
pItem = pImpl->GetAnchor();
break;
case RES_HORI_ORIENT:
pItem = pImpl->GetHOrient();
break;
case RES_VERT_ORIENT:
pItem = pImpl->GetVOrient();
break;
case RES_LR_SPACE:
pItem = pImpl->GetLRSpace();
break;
case RES_UL_SPACE:
pItem = pImpl->GetULSpace();
break;
case RES_SURROUND:
pItem = pImpl->GetSurround();
break;
case FN_TEXT_RANGE :
aRet <<= pImpl->GetTextRange();
break;
case RES_OPAQUE :
aRet <<= pImpl->GetOpaque();
break;
case FN_ANCHOR_POSITION :
{
aRet <<= awt::Point();
}
break;
// #i26791#
case RES_FOLLOW_TEXT_FLOW :
{
pItem = pImpl->GetFollowTextFlow();
}
break;
// #i28701#
case RES_WRAP_INFLUENCE_ON_OBJPOS:
{
pItem = pImpl->GetWrapInfluenceOnObjPos();
}
break;
// #i28749#
case FN_SHAPE_TRANSFORMATION_IN_HORI_L2R:
{
// get property <::drawing::Shape::Transformation>
// without conversion to layout direction as below
aRet = _getPropAtAggrObj( "Transformation" );
}
break;
case FN_SHAPE_POSITION_LAYOUT_DIR:
{
aRet <<= pImpl->GetPositionLayoutDir();
}
break;
// #i36248#
case FN_SHAPE_STARTPOSITION_IN_HORI_L2R:
{
// get property <::drawing::Shape::StartPosition>
// without conversion to layout direction as below
aRet = _getPropAtAggrObj( "StartPosition" );
}
break;
case FN_SHAPE_ENDPOSITION_IN_HORI_L2R:
{
// get property <::drawing::Shape::StartPosition>
// without conversion to layout direction as below
aRet = _getPropAtAggrObj( "EndPosition" );
}
break;
}
if(pItem)
pItem->QueryValue(aRet, pEntry->nMemberId);
}
}
else
{
aRet = _getPropAtAggrObj( rPropertyName );
// #i31698# - convert the position (translation)
// of the drawing object in the transformation
if ( rPropertyName == "Transformation" )
{
drawing::HomogenMatrix3 aMatrix;
aRet >>= aMatrix;
aRet <<= ConvertTransformationToLayoutDir( aMatrix );
}
// #i36248#
else if ( rPropertyName == "StartPosition" )
{
awt::Point aStartPos;
aRet >>= aStartPos;
// #i59051#
aRet <<= ConvertStartOrEndPosToLayoutDir( aStartPos );
}
else if ( rPropertyName == "EndPosition" )
{
awt::Point aEndPos;
aRet >>= aEndPos;
// #i59051#
aRet <<= ConvertStartOrEndPosToLayoutDir( aEndPos );
}
// #i59051#
else if ( rPropertyName == "PolyPolygonBezier" )
{
drawing::PolyPolygonBezierCoords aPath;
aRet >>= aPath;
aRet <<= ConvertPolyPolygonBezierToLayoutDir( aPath );
}
else if (rPropertyName == "ZOrder")
{
// Convert the real draw page position to the logical one that ignores textboxes.
if (pFormat)
{
const SdrObject* pObj = pFormat->FindRealSdrObject();
if (pObj)
{
bool bConvert = true;
if (SvxShape* pSvxShape = GetSvxShape())
// In case of group shapes, pSvxShape points to the child shape, while pObj points to the outermost group shape.
if (pSvxShape->GetSdrObject() != pObj)
// Textboxes are not expected inside group shapes, so no conversion is necessary there.
bConvert = false;
if (bConvert)
{
aRet <<= SwTextBoxHelper::getOrdNum(pObj);
}
}
}
}
}
}
return aRet;
}
uno::Any SwXShape::_getPropAtAggrObj( const OUString& _rPropertyName )
{
uno::Any aRet;
const uno::Type& rPSetType =
cppu::UnoType<beans::XPropertySet>::get();
uno::Any aPSet = xShapeAgg->queryAggregation(rPSetType);
auto xPrSet = o3tl::tryAccess<uno::Reference<beans::XPropertySet>>(aPSet);
if ( !xPrSet )
{
throw uno::RuntimeException();
}
aRet = (*xPrSet)->getPropertyValue( _rPropertyName );
return aRet;
}
beans::PropertyState SwXShape::getPropertyState( const OUString& rPropertyName )
{
SolarMutexGuard aGuard;
uno::Sequence< OUString > aNames { rPropertyName };
uno::Sequence< beans::PropertyState > aStates = getPropertyStates(aNames);
return aStates.getConstArray()[0];
}
uno::Sequence< beans::PropertyState > SwXShape::getPropertyStates(
const uno::Sequence< OUString >& aPropertyNames )
{
SolarMutexGuard aGuard;
SwFrameFormat* pFormat = GetFrameFormat();
uno::Sequence< beans::PropertyState > aRet(aPropertyNames.getLength());
if(!xShapeAgg.is())
throw uno::RuntimeException();
SvxShape* pSvxShape = GetSvxShape();
bool bGroupMember = false;
bool bFormControl = false;
SdrObject* pObject = pSvxShape ? pSvxShape->GetSdrObject() : nullptr;
if(pObject)
{
bGroupMember = pObject->getParentSdrObjectFromSdrObject() != nullptr;
bFormControl = pObject->GetObjInventor() == SdrInventor::FmForm;
}
const OUString* pNames = aPropertyNames.getConstArray();
beans::PropertyState* pRet = aRet.getArray();
uno::Reference< XPropertyState > xShapePrState;
for(sal_Int32 nProperty = 0; nProperty < aPropertyNames.getLength(); nProperty++)
{
const SfxItemPropertySimpleEntry* pEntry = m_pPropSet->getPropertyMap().getByName( pNames[nProperty] );
if(pEntry)
{
if(RES_OPAQUE == pEntry->nWID)
pRet[nProperty] = bFormControl ?
beans::PropertyState_DEFAULT_VALUE : beans::PropertyState_DIRECT_VALUE;
else if(FN_ANCHOR_POSITION == pEntry->nWID)
pRet[nProperty] = beans::PropertyState_DIRECT_VALUE;
else if(FN_TEXT_RANGE == pEntry->nWID)
pRet[nProperty] = beans::PropertyState_DIRECT_VALUE;
else if(bGroupMember)
pRet[nProperty] = beans::PropertyState_DEFAULT_VALUE;
else if (pEntry->nWID == RES_FRM_SIZE &&
(pEntry->nMemberId == MID_FRMSIZE_REL_HEIGHT_RELATION ||
pEntry->nMemberId == MID_FRMSIZE_REL_WIDTH_RELATION))
pRet[nProperty] = beans::PropertyState_DIRECT_VALUE;
else if (pEntry->nWID == FN_TEXT_BOX)
{
// The TextBox property is set, if we can find a textbox for this shape.
if (pFormat && SwTextBoxHelper::isTextBox(pFormat, RES_DRAWFRMFMT))
pRet[nProperty] = beans::PropertyState_DIRECT_VALUE;
else
pRet[nProperty] = beans::PropertyState_DEFAULT_VALUE;
}
else if(pFormat)
{
const SwAttrSet& rSet = pFormat->GetAttrSet();
SfxItemState eItemState = rSet.GetItemState(pEntry->nWID, false);
if(SfxItemState::SET == eItemState)
pRet[nProperty] = beans::PropertyState_DIRECT_VALUE;
else if(SfxItemState::DEFAULT == eItemState)
pRet[nProperty] = beans::PropertyState_DEFAULT_VALUE;
else
pRet[nProperty] = beans::PropertyState_AMBIGUOUS_VALUE;
}
else
{
SfxPoolItem* pItem = nullptr;
switch(pEntry->nWID)
{
case RES_ANCHOR:
pItem = pImpl->GetAnchor();
break;
case RES_HORI_ORIENT:
pItem = pImpl->GetHOrient();
break;
case RES_VERT_ORIENT:
pItem = pImpl->GetVOrient();
break;
case RES_LR_SPACE:
pItem = pImpl->GetLRSpace();
break;
case RES_UL_SPACE:
pItem = pImpl->GetULSpace();
break;
case RES_SURROUND:
pItem = pImpl->GetSurround();
break;
// #i28701#
case RES_WRAP_INFLUENCE_ON_OBJPOS:
{
pItem = pImpl->GetWrapInfluenceOnObjPos();
}
break;
}
if(pItem)
pRet[nProperty] = beans::PropertyState_DIRECT_VALUE;
else
pRet[nProperty] = beans::PropertyState_DEFAULT_VALUE;
}
}
else
{
if(!xShapePrState.is())
{
const uno::Type& rPStateType = cppu::UnoType<XPropertyState>::get();
uno::Any aPState = xShapeAgg->queryAggregation(rPStateType);
auto ps = o3tl::tryAccess<uno::Reference<XPropertyState>>(
aPState);
if(!ps)
throw uno::RuntimeException();
xShapePrState = *ps;
}
pRet[nProperty] = xShapePrState->getPropertyState(pNames[nProperty]);
}
}
return aRet;
}
void SwXShape::setPropertyToDefault( const OUString& rPropertyName )
{
SolarMutexGuard aGuard;
SwFrameFormat* pFormat = GetFrameFormat();
if(!xShapeAgg.is())
throw uno::RuntimeException();
const SfxItemPropertySimpleEntry* pEntry = m_pPropSet->getPropertyMap().getByName( rPropertyName );
if(pEntry)
{
if ( pEntry->nFlags & beans::PropertyAttribute::READONLY)
throw uno::RuntimeException("Property is read-only: " + rPropertyName, static_cast < cppu::OWeakObject * > ( this ) );
if(pFormat)
{
const SfxItemSet& rSet = pFormat->GetAttrSet();
SfxItemSet aSet(pFormat->GetDoc()->GetAttrPool(), {{pEntry->nWID, pEntry->nWID}});
aSet.SetParent(&rSet);
aSet.ClearItem(pEntry->nWID);
pFormat->GetDoc()->SetAttr(aSet, *pFormat);
}
else
{
switch(pEntry->nWID)
{
case RES_ANCHOR: pImpl->RemoveAnchor(); break;
case RES_HORI_ORIENT: pImpl->RemoveHOrient(); break;
case RES_VERT_ORIENT: pImpl->RemoveVOrient(); break;
case RES_LR_SPACE: pImpl->RemoveLRSpace(); break;
case RES_UL_SPACE: pImpl->RemoveULSpace(); break;
case RES_SURROUND: pImpl->RemoveSurround();break;
case RES_OPAQUE : pImpl->SetOpaque(false); break;
case FN_TEXT_RANGE :
break;
// #i26791#
case RES_FOLLOW_TEXT_FLOW:
{
pImpl->RemoveFollowTextFlow();
}
break;
// #i28701#
case RES_WRAP_INFLUENCE_ON_OBJPOS:
{
pImpl->RemoveWrapInfluenceOnObjPos();
}
break;
}
}
}
else
{
const uno::Type& rPStateType = cppu::UnoType<XPropertyState>::get();
uno::Any aPState = xShapeAgg->queryAggregation(rPStateType);
auto xShapePrState = o3tl::tryAccess<uno::Reference<XPropertyState>>(
aPState);
if(!xShapePrState)
throw uno::RuntimeException();
(*xShapePrState)->setPropertyToDefault( rPropertyName );
}
}
uno::Any SwXShape::getPropertyDefault( const OUString& rPropertyName )
{
SolarMutexGuard aGuard;
SwFrameFormat* pFormat = GetFrameFormat();
uno::Any aRet;
if(!xShapeAgg.is())
throw uno::RuntimeException();
const SfxItemPropertySimpleEntry* pEntry = m_pPropSet->getPropertyMap().getByName( rPropertyName );
if(pEntry)
{
if(!(pEntry->nWID < RES_FRMATR_END && pFormat))
throw uno::RuntimeException();
const SfxPoolItem& rDefItem =
pFormat->GetDoc()->GetAttrPool().GetDefaultItem(pEntry->nWID);
rDefItem.QueryValue(aRet, pEntry->nMemberId);
}
else
{
const uno::Type& rPStateType = cppu::UnoType<XPropertyState>::get();
uno::Any aPState = xShapeAgg->queryAggregation(rPStateType);
auto xShapePrState = o3tl::tryAccess<uno::Reference<XPropertyState>>(
aPState);
if(!xShapePrState)
throw uno::RuntimeException();
(*xShapePrState)->getPropertyDefault( rPropertyName );
}
return aRet;
}
void SwXShape::addPropertyChangeListener(
const OUString& _propertyName,
const uno::Reference< beans::XPropertyChangeListener > & _listener )
{
if ( !xShapeAgg.is() )
throw uno::RuntimeException("no shape aggregate", *this );
// must be handled by the aggregate
uno::Reference< beans::XPropertySet > xShapeProps;
if ( xShapeAgg->queryAggregation( cppu::UnoType<beans::XPropertySet>::get() ) >>= xShapeProps )
xShapeProps->addPropertyChangeListener( _propertyName, _listener );
}
void SwXShape::removePropertyChangeListener(
const OUString& _propertyName,
const uno::Reference< beans::XPropertyChangeListener > & _listener)
{
if ( !xShapeAgg.is() )
throw uno::RuntimeException("no shape aggregate", *this );
// must be handled by the aggregate
uno::Reference< beans::XPropertySet > xShapeProps;
if ( xShapeAgg->queryAggregation( cppu::UnoType<beans::XPropertySet>::get() ) >>= xShapeProps )
xShapeProps->removePropertyChangeListener( _propertyName, _listener );
}
void SwXShape::addVetoableChangeListener(
const OUString& /*PropertyName*/,
const uno::Reference< beans::XVetoableChangeListener > & /*aListener*/ )
{
OSL_FAIL("not implemented");
}
void SwXShape::removeVetoableChangeListener(
const OUString& /*PropertyName*/,
const uno::Reference< beans::XVetoableChangeListener > & /*aListener*/)
{
OSL_FAIL("not implemented");
}
void SwXShape::Modify( const SfxPoolItem* pOld, const SfxPoolItem *pNew)
{
ClientModify(this, pOld, pNew);
}
void SwXShape::attach(const uno::Reference< text::XTextRange > & xTextRange)
{
SolarMutexGuard aGuard;
// get access to SwDoc
// (see also SwXTextRange::XTextRangeToSwPaM)
SwDoc* pDoc = nullptr;
uno::Reference<lang::XUnoTunnel> xRangeTunnel( xTextRange, uno::UNO_QUERY);
if(xRangeTunnel.is())
{
SwXTextRange* pRange = nullptr;
OTextCursorHelper* pCursor = nullptr;
SwXTextPortion* pPortion = nullptr;
SwXText* pText = nullptr;
SwXParagraph* pParagraph = nullptr;
pRange = reinterpret_cast< SwXTextRange * >(
sal::static_int_cast< sal_IntPtr >( xRangeTunnel->getSomething( SwXTextRange::getUnoTunnelId()) ));
pText = reinterpret_cast< SwXText * >(
sal::static_int_cast< sal_IntPtr >( xRangeTunnel->getSomething( SwXText::getUnoTunnelId()) ));
pCursor = reinterpret_cast< OTextCursorHelper * >(
sal::static_int_cast< sal_IntPtr >( xRangeTunnel->getSomething( OTextCursorHelper::getUnoTunnelId()) ));
pPortion = reinterpret_cast< SwXTextPortion * >(
sal::static_int_cast< sal_IntPtr >( xRangeTunnel->getSomething( SwXTextPortion::getUnoTunnelId()) ));
pParagraph = reinterpret_cast< SwXParagraph * >(
sal::static_int_cast< sal_IntPtr >( xRangeTunnel->getSomething( SwXParagraph::getUnoTunnelId( ) ) ) );
if (pRange)
pDoc = &pRange->GetDoc();
else if (!pDoc && pText)
pDoc = pText->GetDoc();
else if (!pDoc && pCursor)
pDoc = pCursor->GetDoc();
else if ( !pDoc && pPortion )
{
pDoc = pPortion->GetCursor().GetDoc();
}
else if ( !pDoc && pParagraph && pParagraph->GetTextNode( ) )
{
pDoc = const_cast<SwDoc*>(pParagraph->GetTextNode()->GetDoc());
}
}
if(!pDoc)
throw uno::RuntimeException();
SwDocShell *pDocSh = pDoc->GetDocShell();
if (pDocSh)
{
uno::Reference< frame::XModel > xModel;
xModel = pDocSh->GetModel();
uno::Reference< drawing::XDrawPageSupplier > xDPS(xModel, uno::UNO_QUERY);
if (xDPS.is())
{
uno::Reference< drawing::XDrawPage > xDP( xDPS->getDrawPage() );
if (xDP.is())
{
uno::Any aPos;
aPos <<= xTextRange;
setPropertyValue("TextRange", aPos);
uno::Reference< drawing::XShape > xTemp( static_cast<cppu::OWeakObject*>(this), uno::UNO_QUERY );
xDP->add( xTemp );
}
}
}
}
uno::Reference< text::XTextRange > SwXShape::getAnchor()
{
SolarMutexGuard aGuard;
uno::Reference< text::XTextRange > aRef;
SwFrameFormat* pFormat = GetFrameFormat();
if(pFormat)
{
const SwFormatAnchor& rAnchor = pFormat->GetAnchor();
// return an anchor for non-page bound frames
// and for page bound frames that have a page no == NULL and a content position
if ((rAnchor.GetAnchorId() != RndStdIds::FLY_AT_PAGE) ||
(rAnchor.GetContentAnchor() && !rAnchor.GetPageNum()))
{
const SwPosition &rPos = *(pFormat->GetAnchor().GetContentAnchor());
aRef = SwXTextRange::CreateXTextRange(*pFormat->GetDoc(), rPos, nullptr);
}
}
else
aRef = pImpl->GetTextRange();
return aRef;
}
void SwXShape::dispose()
{
SolarMutexGuard aGuard;
SwFrameFormat* pFormat = GetFrameFormat();
if(pFormat)
{
// determine correct <SdrObject>
SvxShape* pSvxShape = GetSvxShape();
SdrObject* pObj = pSvxShape ? pSvxShape->GetSdrObject() : nullptr;
// safety assertion:
// <pObj> must be the same as <pFormat->FindSdrObject()>, if <pObj> isn't
// a 'virtual' drawing object.
// correct assertion and refine it for safety reason.
OSL_ENSURE( !pObj ||
dynamic_cast<const SwDrawVirtObj*>( pObj) != nullptr ||
pObj->getParentSdrObjectFromSdrObject() ||
pObj == pFormat->FindSdrObject(),
"<SwXShape::dispose(..) - different 'master' drawing objects!!" );
// perform delete of draw frame format *not*
// for 'virtual' drawing objects.
// no delete of draw format for members
// of a group
if ( pObj &&
dynamic_cast<const SwDrawVirtObj*>( pObj) == nullptr &&
!pObj->getParentSdrObjectFromSdrObject() &&
pObj->IsInserted() )
{
if (pFormat->GetAnchor().GetAnchorId() == RndStdIds::FLY_AS_CHAR)
{
const SwPosition &rPos = *(pFormat->GetAnchor().GetContentAnchor());
SwTextNode *pTextNode = rPos.nNode.GetNode().GetTextNode();
const sal_Int32 nIdx = rPos.nContent.GetIndex();
pTextNode->DeleteAttributes( RES_TXTATR_FLYCNT, nIdx );
}
else
pFormat->GetDoc()->getIDocumentLayoutAccess().DelLayoutFormat( pFormat );
}
}
if(xShapeAgg.is())
{
uno::Any aAgg(xShapeAgg->queryAggregation( cppu::UnoType<XComponent>::get()));
uno::Reference<XComponent> xComp;
aAgg >>= xComp;
if(xComp.is())
xComp->dispose();
}
}
void SwXShape::addEventListener(
const uno::Reference< lang::XEventListener > & aListener)
{
SvxShape* pSvxShape = GetSvxShape();
if(pSvxShape)
pSvxShape->addEventListener(aListener);
}
void SwXShape::removeEventListener(
const uno::Reference< lang::XEventListener > & aListener)
{
SvxShape* pSvxShape = GetSvxShape();
if(pSvxShape)
pSvxShape->removeEventListener(aListener);
}
OUString SwXShape::getImplementationName()
{
return OUString("SwXShape");
}
sal_Bool SwXShape::supportsService(const OUString& rServiceName)
{
return cppu::supportsService(this, rServiceName);
}
uno::Sequence< OUString > SwXShape::getSupportedServiceNames()
{
uno::Sequence< OUString > aSeq;
if (SvxShape* pSvxShape = GetSvxShape())
aSeq = pSvxShape->getSupportedServiceNames();
aSeq.realloc(aSeq.getLength() + 1);
aSeq.getArray()[aSeq.getLength() - 1] = "com.sun.star.drawing.Shape";
return aSeq;
}
SvxShape* SwXShape::GetSvxShape()
{
SvxShape* pSvxShape = nullptr;
if(xShapeAgg.is())
{
uno::Reference< lang::XUnoTunnel > xShapeTunnel(xShapeAgg, uno::UNO_QUERY);
if(xShapeTunnel.is())
pSvxShape = reinterpret_cast< SvxShape * >(
sal::static_int_cast< sal_IntPtr >( xShapeTunnel->getSomething(SvxShape::getUnoTunnelId()) ));
}
return pSvxShape;
}
// #i31698#
// implementation of virtual methods from drawing::XShape
awt::Point SAL_CALL SwXShape::getPosition()
{
awt::Point aPos( GetAttrPosition() );
// handle group members
SvxShape* pSvxShape = GetSvxShape();
if ( pSvxShape )
{
SdrObject* pTopGroupObj = GetTopGroupObj( pSvxShape );
if ( pTopGroupObj )
{
// #i34750# - get attribute position of top group
// shape and add offset between top group object and group member
uno::Reference< drawing::XShape > xGroupShape =
uno::Reference< drawing::XShape >( pTopGroupObj->getUnoShape(),
uno::UNO_QUERY );
aPos = xGroupShape->getPosition();
// add offset between top group object and group member
// to the determined attribute position
// #i34750#:
// consider the layout direction
const tools::Rectangle aMemberObjRect = GetSvxShape()->GetSdrObject()->GetSnapRect();
const tools::Rectangle aGroupObjRect = pTopGroupObj->GetSnapRect();
// #i53320# - relative position of group member and
// top group object is always given in horizontal left-to-right layout.
awt::Point aOffset( 0, 0 );
{
aOffset.X = ( aMemberObjRect.Left() - aGroupObjRect.Left() );
aOffset.Y = ( aMemberObjRect.Top() - aGroupObjRect.Top() );
}
aOffset.X = convertTwipToMm100(aOffset.X);
aOffset.Y = convertTwipToMm100(aOffset.Y);
aPos.X += aOffset.X;
aPos.Y += aOffset.Y;
}
}
return aPos;
}
void SAL_CALL SwXShape::setPosition( const awt::Point& aPosition )
{
SdrObject* pTopGroupObj = GetTopGroupObj();
if ( !pTopGroupObj )
{
// #i37877# - no adjustment of position attributes,
// if the position also has to be applied at the drawing object and
// a contact object is already registered at the drawing object.
bool bApplyPosAtDrawObj(false);
bool bNoAdjustOfPosProp(false);
// #i35798# - apply position also to drawing object,
// if drawing object has no anchor position set.
if ( mxShape.is() )
{
SvxShape* pSvxShape = GetSvxShape();
if ( pSvxShape )
{
const SdrObject* pObj = pSvxShape->GetSdrObject();
if ( pObj &&
pObj->GetAnchorPos().X() == 0 &&
pObj->GetAnchorPos().Y() == 0 )
{
bApplyPosAtDrawObj = true;
if ( pObj->GetUserCall() &&
dynamic_cast<const SwDrawContact*>( pObj->GetUserCall()) != nullptr )
{
bNoAdjustOfPosProp = true;
}
}
}
}
// shape isn't a group member. Thus, set positioning attributes
if ( !bNoAdjustOfPosProp )
{
AdjustPositionProperties( aPosition );
}
if ( bApplyPosAtDrawObj )
{
mxShape->setPosition( aPosition );
}
}
else if ( mxShape.is() )
{
// shape is a member of a group. Thus, set its position.
awt::Point aNewPos( aPosition );
// The given position is given in the according layout direction. Thus,
// it has to be converted to a position in horizontal left-to-right
// layout.
// convert given absolute attribute position in layout direction into
// position in horizontal left-to-right layout.
{
aNewPos = ConvertPositionToHoriL2R( aNewPos, getSize() );
}
// Convert given absolute position in horizontal left-to-right
// layout into relative position in horizontal left-to-right layout.
uno::Reference< drawing::XShape > xGroupShape =
uno::Reference< drawing::XShape >( pTopGroupObj->getUnoShape(),
uno::UNO_QUERY );
{
// #i34750#
// use method <xGroupShape->getPosition()> to get the correct
// position of the top group object.
awt::Point aAttrPosInHoriL2R(
ConvertPositionToHoriL2R( xGroupShape->getPosition(),
xGroupShape->getSize() ) );
aNewPos.X -= aAttrPosInHoriL2R.X;
aNewPos.Y -= aAttrPosInHoriL2R.Y;
}
// convert relative position in horizontal left-to-right layout into
// absolute position in horizontal left-to-right layout
{
// #i34750#
// use method <SvxShape->getPosition()> to get the correct
// 'Drawing layer' position of the top group shape.
uno::Reference< lang::XUnoTunnel > xGrpShapeTunnel(
pTopGroupObj->getUnoShape(),
uno::UNO_QUERY );
SvxShape* pSvxGroupShape = reinterpret_cast< SvxShape * >(
sal::static_int_cast< sal_IntPtr >( xGrpShapeTunnel->getSomething(SvxShape::getUnoTunnelId()) ));
const awt::Point aGroupPos = pSvxGroupShape->getPosition();
aNewPos.X += aGroupPos.X;
aNewPos.Y += aGroupPos.Y;
}
// set position
mxShape->setPosition( aNewPos );
}
}
awt::Size SAL_CALL SwXShape::getSize()
{
awt::Size aSize;
if ( mxShape.is() )
{
aSize = mxShape->getSize();
}
return aSize;
}
void SAL_CALL SwXShape::setSize( const awt::Size& aSize )
{
comphelper::ProfileZone aZone("SwXShape::setSize");
if ( mxShape.is() )
{
mxShape->setSize( aSize );
}
SwTextBoxHelper::syncProperty(GetFrameFormat(), RES_FRM_SIZE, MID_FRMSIZE_SIZE, uno::makeAny(aSize));
}
// #i31698#
// implementation of virtual methods from drawing::XShapeDescriptor
OUString SAL_CALL SwXShape::getShapeType()
{
if ( mxShape.is() )
{
return mxShape->getShapeType();
}
return OUString();
}
/** method to determine top group object
#i31698#
*/
SdrObject* SwXShape::GetTopGroupObj( SvxShape* _pSvxShape )
{
SdrObject* pTopGroupObj( nullptr );
SvxShape* pSvxShape = _pSvxShape ? _pSvxShape : GetSvxShape();
if ( pSvxShape )
{
SdrObject* pSdrObj = pSvxShape->GetSdrObject();
if ( pSdrObj && pSdrObj->getParentSdrObjectFromSdrObject() )
{
pTopGroupObj = pSdrObj->getParentSdrObjectFromSdrObject();
while ( pTopGroupObj->getParentSdrObjectFromSdrObject() )
{
pTopGroupObj = pTopGroupObj->getParentSdrObjectFromSdrObject();
}
}
}
return pTopGroupObj;
}
/** method to determine position according to the positioning attributes
#i31698#
*/
awt::Point SwXShape::GetAttrPosition()
{
awt::Point aAttrPos;
uno::Any aHoriPos( getPropertyValue("HoriOrientPosition") );
aHoriPos >>= aAttrPos.X;
uno::Any aVertPos( getPropertyValue("VertOrientPosition") );
aVertPos >>= aAttrPos.Y;
// #i35798# - fallback, if attribute position is (0,0)
// and no anchor position is applied to the drawing object
SvxShape* pSvxShape = GetSvxShape();
if ( pSvxShape )
{
const SdrObject* pObj = pSvxShape->GetSdrObject();
if ( pObj &&
pObj->GetAnchorPos().X() == 0 &&
pObj->GetAnchorPos().Y() == 0 &&
aAttrPos.X == 0 && aAttrPos.Y == 0 )
{
const tools::Rectangle aObjRect = pObj->GetSnapRect();
aAttrPos.X = convertTwipToMm100(aObjRect.Left());
aAttrPos.Y = convertTwipToMm100(aObjRect.Top());
}
}
// #i35007# - If drawing object is anchored as-character,
// it's x-position isn't sensible. Thus, return the x-position as zero in this case.
text::TextContentAnchorType eTextAnchorType =
text::TextContentAnchorType_AT_PARAGRAPH;
{
uno::Any aAny = getPropertyValue( "AnchorType" );
aAny >>= eTextAnchorType;
}
if ( eTextAnchorType == text::TextContentAnchorType_AS_CHARACTER )
{
aAttrPos.X = 0;
}
return aAttrPos;
}
/** method to convert the position (translation) of the drawing object to
the layout direction horizontal left-to-right.
#i31698#
*/
awt::Point SwXShape::ConvertPositionToHoriL2R( const awt::Point& rObjPos,
const awt::Size& rObjSize )
{
awt::Point aObjPosInHoriL2R( rObjPos );
SwFrameFormat* pFrameFormat = GetFrameFormat();
if ( pFrameFormat )
{
SwFrameFormat::tLayoutDir eLayoutDir = pFrameFormat->GetLayoutDir();
switch ( eLayoutDir )
{
case SwFrameFormat::HORI_L2R:
{
// nothing to do
}
break;
case SwFrameFormat::HORI_R2L:
{
aObjPosInHoriL2R.X = -rObjPos.X - rObjSize.Width;
}
break;
case SwFrameFormat::VERT_R2L:
{
aObjPosInHoriL2R.X = -rObjPos.Y - rObjSize.Width;
aObjPosInHoriL2R.Y = rObjPos.X;
}
break;
default:
{
OSL_FAIL( "<SwXShape::ConvertPositionToHoriL2R(..)> - unsupported layout direction" );
}
}
}
return aObjPosInHoriL2R;
}
/** method to convert the transformation of the drawing object to the layout
direction, the drawing object is in
#i31698#
*/
drawing::HomogenMatrix3 SwXShape::ConvertTransformationToLayoutDir(
const drawing::HomogenMatrix3& rMatrixInHoriL2R )
{
drawing::HomogenMatrix3 aMatrix(rMatrixInHoriL2R);
// #i44334#, #i44681# - direct manipulation of the
// transformation structure isn't valid, if it contains rotation.
SvxShape* pSvxShape = GetSvxShape();
OSL_ENSURE( pSvxShape,
"<SwXShape::ConvertTransformationToLayoutDir(..)> - no SvxShape found!");
if ( pSvxShape )
{
const SdrObject* pObj = pSvxShape->GetSdrObject();
OSL_ENSURE( pObj,
"<SwXShape::ConvertTransformationToLayoutDir(..)> - no SdrObject found!");
if ( pObj )
{
// get position of object in Writer coordinate system.
awt::Point aPos( getPosition() );
// get position of object in Drawing layer coordinate system
const Point aTmpObjPos( pObj->GetSnapRect().TopLeft() );
const awt::Point aObjPos(
convertTwipToMm100( aTmpObjPos.X() - pObj->GetAnchorPos().X() ),
convertTwipToMm100( aTmpObjPos.Y() - pObj->GetAnchorPos().Y() ) );
// determine difference between these positions according to the
// Writer coordinate system
const awt::Point aTranslateDiff( aPos.X - aObjPos.X,
aPos.Y - aObjPos.Y );
// apply translation difference to transformation matrix.
if ( aTranslateDiff.X != 0 || aTranslateDiff.Y != 0 )
{
// #i73079# - use correct matrix type
::basegfx::B2DHomMatrix aTempMatrix;
aTempMatrix.set(0, 0, aMatrix.Line1.Column1 );
aTempMatrix.set(0, 1, aMatrix.Line1.Column2 );
aTempMatrix.set(0, 2, aMatrix.Line1.Column3 );
aTempMatrix.set(1, 0, aMatrix.Line2.Column1 );
aTempMatrix.set(1, 1, aMatrix.Line2.Column2 );
aTempMatrix.set(1, 2, aMatrix.Line2.Column3 );
aTempMatrix.set(2, 0, aMatrix.Line3.Column1 );
aTempMatrix.set(2, 1, aMatrix.Line3.Column2 );
aTempMatrix.set(2, 2, aMatrix.Line3.Column3 );
// #i73079#
aTempMatrix.translate( aTranslateDiff.X, aTranslateDiff.Y );
aMatrix.Line1.Column1 = aTempMatrix.get(0, 0);
aMatrix.Line1.Column2 = aTempMatrix.get(0, 1);
aMatrix.Line1.Column3 = aTempMatrix.get(0, 2);
aMatrix.Line2.Column1 = aTempMatrix.get(1, 0);
aMatrix.Line2.Column2 = aTempMatrix.get(1, 1);
aMatrix.Line2.Column3 = aTempMatrix.get(1, 2);
aMatrix.Line3.Column1 = aTempMatrix.get(2, 0);
aMatrix.Line3.Column2 = aTempMatrix.get(2, 1);
aMatrix.Line3.Column3 = aTempMatrix.get(2, 2);
}
}
}
return aMatrix;
}
/** method to adjust the positioning properties
#i31698#
*/
void SwXShape::AdjustPositionProperties( const awt::Point& rPosition )
{
// handle x-position
// #i35007# - no handling of x-position, if drawing
// object is anchored as-character, because it doesn't make sense.
text::TextContentAnchorType eTextAnchorType =
text::TextContentAnchorType_AT_PARAGRAPH;
{
uno::Any aAny = getPropertyValue( "AnchorType" );
aAny >>= eTextAnchorType;
}
if ( eTextAnchorType != text::TextContentAnchorType_AS_CHARACTER )
{
// determine current x-position
const OUString aHoriPosPropStr("HoriOrientPosition");
uno::Any aHoriPos( getPropertyValue( aHoriPosPropStr ) );
sal_Int32 dCurrX = 0;
aHoriPos >>= dCurrX;
// change x-position attribute, if needed
if ( dCurrX != rPosition.X )
{
// adjust x-position orientation to text::HoriOrientation::NONE, if needed
// Note: has to be done before setting x-position attribute
const OUString aHoriOrientPropStr("HoriOrient");
uno::Any aHoriOrient( getPropertyValue( aHoriOrientPropStr ) );
sal_Int16 eHoriOrient;
if (aHoriOrient >>= eHoriOrient) // may be void
{
if ( eHoriOrient != text::HoriOrientation::NONE )
{
eHoriOrient = text::HoriOrientation::NONE;
aHoriOrient <<= eHoriOrient;
setPropertyValue( aHoriOrientPropStr, aHoriOrient );
}
}
// set x-position attribute
aHoriPos <<= rPosition.X;
setPropertyValue( aHoriPosPropStr, aHoriPos );
}
}
// handle y-position
{
// determine current y-position
const OUString aVertPosPropStr("VertOrientPosition");
uno::Any aVertPos( getPropertyValue( aVertPosPropStr ) );
sal_Int32 dCurrY = 0;
aVertPos >>= dCurrY;
// change y-position attribute, if needed
if ( dCurrY != rPosition.Y )
{
// adjust y-position orientation to text::VertOrientation::NONE, if needed
// Note: has to be done before setting y-position attribute
const OUString aVertOrientPropStr("VertOrient");
uno::Any aVertOrient( getPropertyValue( aVertOrientPropStr ) );
sal_Int16 eVertOrient;
if (aVertOrient >>= eVertOrient) // may be void
{
if ( eVertOrient != text::VertOrientation::NONE )
{
eVertOrient = text::VertOrientation::NONE;
aVertOrient <<= eVertOrient;
setPropertyValue( aVertOrientPropStr, aVertOrient );
}
}
// set y-position attribute
aVertPos <<= rPosition.Y;
setPropertyValue( aVertPosPropStr, aVertPos );
}
}
}
/** method to convert start or end position of the drawing object to the
Writer specific position, which is the attribute position in layout direction
#i59051#
*/
css::awt::Point SwXShape::ConvertStartOrEndPosToLayoutDir(
const css::awt::Point& aStartOrEndPos )
{
awt::Point aConvertedPos( aStartOrEndPos );
SvxShape* pSvxShape = GetSvxShape();
OSL_ENSURE( pSvxShape,
"<SwXShape::ConvertStartOrEndPosToLayoutDir(..)> - no SvxShape found!");
if ( pSvxShape )
{
const SdrObject* pObj = pSvxShape->GetSdrObject();
OSL_ENSURE( pObj,
"<SwXShape::ConvertStartOrEndPosToLayoutDir(..)> - no SdrObject found!");
if ( pObj )
{
// get position of object in Writer coordinate system.
awt::Point aPos( getPosition() );
// get position of object in Drawing layer coordinate system
const Point aTmpObjPos( pObj->GetSnapRect().TopLeft() );
const awt::Point aObjPos(
convertTwipToMm100( aTmpObjPos.X() - pObj->GetAnchorPos().X() ),
convertTwipToMm100( aTmpObjPos.Y() - pObj->GetAnchorPos().Y() ) );
// determine difference between these positions according to the
// Writer coordinate system
const awt::Point aTranslateDiff( aPos.X - aObjPos.X,
aPos.Y - aObjPos.Y );
// apply translation difference to transformation matrix.
if ( aTranslateDiff.X != 0 || aTranslateDiff.Y != 0 )
{
aConvertedPos.X = aConvertedPos.X + aTranslateDiff.X;
aConvertedPos.Y = aConvertedPos.Y + aTranslateDiff.Y;
}
}
}
return aConvertedPos;
}
css::drawing::PolyPolygonBezierCoords SwXShape::ConvertPolyPolygonBezierToLayoutDir(
const css::drawing::PolyPolygonBezierCoords& aPath )
{
drawing::PolyPolygonBezierCoords aConvertedPath( aPath );
SvxShape* pSvxShape = GetSvxShape();
OSL_ENSURE( pSvxShape,
"<SwXShape::ConvertStartOrEndPosToLayoutDir(..)> - no SvxShape found!");
if ( pSvxShape )
{
const SdrObject* pObj = pSvxShape->GetSdrObject();
OSL_ENSURE( pObj,
"<SwXShape::ConvertStartOrEndPosToLayoutDir(..)> - no SdrObject found!");
if ( pObj )
{
// get position of object in Writer coordinate system.
awt::Point aPos( getPosition() );
// get position of object in Drawing layer coordinate system
const Point aTmpObjPos( pObj->GetSnapRect().TopLeft() );
const awt::Point aObjPos(
convertTwipToMm100( aTmpObjPos.X() - pObj->GetAnchorPos().X() ),
convertTwipToMm100( aTmpObjPos.Y() - pObj->GetAnchorPos().Y() ) );
// determine difference between these positions according to the
// Writer coordinate system
const awt::Point aTranslateDiff( aPos.X - aObjPos.X,
aPos.Y - aObjPos.Y );
// apply translation difference to PolyPolygonBezier.
if ( aTranslateDiff.X != 0 || aTranslateDiff.Y != 0 )
{
const basegfx::B2DHomMatrix aMatrix(basegfx::utils::createTranslateB2DHomMatrix(
aTranslateDiff.X, aTranslateDiff.Y));
const sal_Int32 nOuterSequenceCount(aConvertedPath.Coordinates.getLength());
drawing::PointSequence* pInnerSequence = aConvertedPath.Coordinates.getArray();
for(sal_Int32 a(0); a < nOuterSequenceCount; a++)
{
const sal_Int32 nInnerSequenceCount(pInnerSequence->getLength());
awt::Point* pArray = pInnerSequence->getArray();
for(sal_Int32 b(0); b < nInnerSequenceCount; b++)
{
basegfx::B2DPoint aNewCoordinatePair(pArray->X, pArray->Y);
aNewCoordinatePair *= aMatrix;
pArray->X = basegfx::fround(aNewCoordinatePair.getX());
pArray->Y = basegfx::fround(aNewCoordinatePair.getY());
pArray++;
}
}
}
}
}
return aConvertedPath;
}
SwXGroupShape::SwXGroupShape(uno::Reference<XInterface> & xShape,
SwDoc const*const pDoc)
: SwXShape(xShape, pDoc)
{
#if OSL_DEBUG_LEVEL > 0
uno::Reference<XShapes> xShapes(xShapeAgg, uno::UNO_QUERY);
OSL_ENSURE(xShapes.is(), "no SvxShape found or shape is not a group shape");
#endif
}
SwXGroupShape::~SwXGroupShape()
{
}
uno::Any SwXGroupShape::queryInterface( const uno::Type& rType )
{
uno::Any aRet;
if(rType == cppu::UnoType<XShapes>::get())
aRet <<= uno::Reference<XShapes>(this);
else
aRet = SwXShape::queryInterface(rType);
return aRet;
}
void SwXGroupShape::acquire( ) throw()
{
SwXShape::acquire();
}
void SwXGroupShape::release( ) throw()
{
SwXShape::release();
}
void SwXGroupShape::add( const uno::Reference< XShape >& xShape )
{
SolarMutexGuard aGuard;
SvxShape* pSvxShape = GetSvxShape();
SwFrameFormat* pFormat = GetFrameFormat();
if(!(pSvxShape && pFormat))
throw uno::RuntimeException();
uno::Reference<XShapes> xShapes;
if( xShapeAgg.is() )
{
const uno::Type& rType = cppu::UnoType<XShapes>::get();
uno::Any aAgg = xShapeAgg->queryAggregation( rType );
aAgg >>= xShapes;
}
if(!xShapes.is())
throw uno::RuntimeException();
xShapes->add(xShape);
uno::Reference<lang::XUnoTunnel> xTunnel(xShape, uno::UNO_QUERY);
SwXShape* pSwShape = nullptr;
if(xShape.is())
pSwShape = reinterpret_cast< SwXShape * >(
sal::static_int_cast< sal_IntPtr >( xTunnel->getSomething(SwXShape::getUnoTunnelId()) ));
if(pSwShape && pSwShape->m_bDescriptor)
{
SvxShape* pAddShape = reinterpret_cast< SvxShape * >(
sal::static_int_cast< sal_IntPtr >( xTunnel->getSomething(SvxShape::getUnoTunnelId()) ));
if(pAddShape)
{
SdrObject* pObj = pAddShape->GetSdrObject();
if(pObj)
{
SwDoc* pDoc = pFormat->GetDoc();
// set layer of new drawing
// object to corresponding invisible layer.
if( SdrInventor::FmForm != pObj->GetObjInventor())
{
pObj->SetLayer( pSwShape->pImpl->GetOpaque()
? pDoc->getIDocumentDrawModelAccess().GetInvisibleHeavenId()
: pDoc->getIDocumentDrawModelAccess().GetInvisibleHellId() );
}
else
{
pObj->SetLayer(pDoc->getIDocumentDrawModelAccess().GetInvisibleControlsId());
}
}
}
pSwShape->m_bDescriptor = false;
//add the group member to the format of the group
SwFrameFormat* pShapeFormat = ::FindFrameFormat( pSvxShape->GetSdrObject() );
if(pShapeFormat)
pFormat->Add(pSwShape);
}
}
void SwXGroupShape::remove( const uno::Reference< XShape >& xShape )
{
SolarMutexGuard aGuard;
uno::Reference<XShapes> xShapes;
if( xShapeAgg.is() )
{
const uno::Type& rType = cppu::UnoType<XShapes>::get();
uno::Any aAgg = xShapeAgg->queryAggregation( rType );
aAgg >>= xShapes;
}
if(!xShapes.is())
throw uno::RuntimeException();
xShapes->remove(xShape);
}
sal_Int32 SwXGroupShape::getCount()
{
SolarMutexGuard aGuard;
uno::Reference<XIndexAccess> xAcc;
if( xShapeAgg.is() )
{
const uno::Type& rType = cppu::UnoType<XIndexAccess>::get();
uno::Any aAgg = xShapeAgg->queryAggregation( rType );
aAgg >>= xAcc;
}
if(!xAcc.is())
throw uno::RuntimeException();
return xAcc->getCount();
}
uno::Any SwXGroupShape::getByIndex(sal_Int32 nIndex)
{
SolarMutexGuard aGuard;
uno::Reference<XIndexAccess> xAcc;
if( xShapeAgg.is() )
{
const uno::Type& rType = cppu::UnoType<XIndexAccess>::get();
uno::Any aAgg = xShapeAgg->queryAggregation( rType );
aAgg >>= xAcc;
}
if(!xAcc.is())
throw uno::RuntimeException();
return xAcc->getByIndex(nIndex);
}
uno::Type SwXGroupShape::getElementType( )
{
SolarMutexGuard aGuard;
uno::Reference<XIndexAccess> xAcc;
if( xShapeAgg.is() )
{
const uno::Type& rType = cppu::UnoType<XIndexAccess>::get();
uno::Any aAgg = xShapeAgg->queryAggregation( rType );
aAgg >>= xAcc;
}
if(!xAcc.is())
throw uno::RuntimeException();
return xAcc->getElementType();
}
sal_Bool SwXGroupShape::hasElements( )
{
SolarMutexGuard aGuard;
uno::Reference<XIndexAccess> xAcc;
if( xShapeAgg.is() )
{
const uno::Type& rType = cppu::UnoType<XIndexAccess>::get();
uno::Any aAgg = xShapeAgg->queryAggregation( rType );
aAgg >>= xAcc;
}
if(!xAcc.is())
throw uno::RuntimeException();
return xAcc->hasElements();
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V773 The exception was thrown without releasing the 'pPam' pointer. A memory leak is possible.
↑ V547 Expression '!bFlyInCnt' is always true.
↑ V560 A part of conditional expression is always true: !pDoc.
↑ V560 A part of conditional expression is always true: !pDoc.
↑ V560 A part of conditional expression is always true: !pDoc.
↑ V560 A part of conditional expression is always true: !pDoc.