/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <oox/drawingml/shape.hxx>
#include <drawingml/customshapeproperties.hxx>
#include <oox/drawingml/theme.hxx>
#include <drawingml/fillproperties.hxx>
#include <drawingml/graphicproperties.hxx>
#include <drawingml/scene3dcontext.hxx>
#include <drawingml/lineproperties.hxx>
#include <drawingml/presetgeometrynames.hxx>
#include "effectproperties.hxx"
#include <oox/drawingml/shapepropertymap.hxx>
#include <drawingml/textbody.hxx>
#include <drawingml/textparagraph.hxx>
#include <drawingml/ThemeOverrideFragmentHandler.hxx>
#include <drawingml/table/tableproperties.hxx>
#include <oox/drawingml/chart/chartconverter.hxx>
#include <drawingml/chart/chartspacefragment.hxx>
#include <drawingml/chart/chartspacemodel.hxx>
#include <o3tl/safeint.hxx>
#include <oox/ppt/pptimport.hxx>
#include <oox/vml/vmldrawing.hxx>
#include <oox/vml/vmlshape.hxx>
#include <oox/vml/vmlshapecontainer.hxx>
#include <oox/core/xmlfilterbase.hxx>
#include <oox/helper/graphichelper.hxx>
#include <oox/helper/propertyset.hxx>
#include <oox/helper/modelobjecthelper.hxx>
#include <oox/mathml/importutils.hxx>
#include <oox/mathml/import.hxx>
#include <oox/token/properties.hxx>
#include <comphelper/classids.hxx>
#include <comphelper/propertysequence.hxx>
#include <comphelper/propertyvalue.hxx>
#include <comphelper/sequence.hxx>
#include <tools/gen.hxx>
#include <tools/globname.hxx>
#include <tools/mapunit.hxx>
#include <editeng/unoprnms.hxx>
#include <com/sun/star/awt/Size.hpp>
#include <com/sun/star/awt/XBitmap.hpp>
#include <com/sun/star/awt/FontWeight.hpp>
#include <com/sun/star/graphic/XGraphic.hpp>
#include <com/sun/star/container/XNamed.hpp>
#include <com/sun/star/container/XNameContainer.hpp>
#include <com/sun/star/beans/XMultiPropertySet.hpp>
#include <com/sun/star/lang/XMultiServiceFactory.hpp>
#include <com/sun/star/xml/AttributeData.hpp>
#include <com/sun/star/xml/sax/XFastSAXSerializable.hpp>
#include <com/sun/star/drawing/HomogenMatrix3.hpp>
#include <com/sun/star/drawing/TextVerticalAdjust.hpp>
#include <com/sun/star/drawing/GraphicExportFilter.hpp>
#include <com/sun/star/drawing/XShapes.hpp>
#include <com/sun/star/drawing/EnhancedCustomShapeAdjustmentValue.hpp>
#include <com/sun/star/drawing/EnhancedCustomShapeTextPathMode.hpp>
#include <com/sun/star/embed/XEmbeddedObject.hpp>
#include <com/sun/star/text/XText.hpp>
#include <com/sun/star/table/BorderLine2.hpp>
#include <com/sun/star/table/ShadowFormat.hpp>
#include <com/sun/star/chart2/XChartDocument.hpp>
#include <com/sun/star/style/ParagraphAdjust.hpp>
#include <com/sun/star/io/XOutputStream.hpp>
#include <basegfx/point/b2dpoint.hxx>
#include <basegfx/polygon/b2dpolygon.hxx>
#include <basegfx/matrix/b2dhommatrix.hxx>
#include <com/sun/star/document/XActionLockable.hpp>
#include <com/sun/star/chart2/data/XDataReceiver.hpp>
#include <svl/outstrm.hxx>
#include <svx/svdtrans.hxx>
#include <unotools/streamwrap.hxx>
#include <unotools/fltrcfg.hxx>
#include <vcl/graph.hxx>
#include <vcl/graphicfilter.hxx>
#include <vcl/svapp.hxx>
#include <sal/log.hxx>
#include <svx/unoshape.hxx>
#include <vcl/wmf.hxx>
using namespace ::oox::core;
using namespace ::com::sun::star;
using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::beans;
using namespace ::com::sun::star::frame;
using namespace ::com::sun::star::text;
using namespace ::com::sun::star::drawing;
using namespace ::com::sun::star::style;
namespace oox { namespace drawingml {
Shape::Shape( const sal_Char* pServiceName, bool bDefaultHeight )
: mpLinePropertiesPtr( new LineProperties )
, mpShapeRefLinePropPtr( new LineProperties )
, mpFillPropertiesPtr( new FillProperties )
, mpShapeRefFillPropPtr( new FillProperties )
, mpGraphicPropertiesPtr( new GraphicProperties )
, mpCustomShapePropertiesPtr( new CustomShapeProperties )
, mp3DPropertiesPtr( new Shape3DProperties )
, mpEffectPropertiesPtr( new EffectProperties )
, mpShapeRefEffectPropPtr( new EffectProperties )
, mpMasterTextListStyle( new TextListStyle )
, mnSubType( 0 )
, meFrameType( FRAMETYPE_GENERIC )
, mnRotation( 0 )
, mnDiagramRotation( 0 )
, mbFlipH( false )
, mbFlipV( false )
, mbHidden( false )
, mbHiddenMasterShape( false )
, mbLockedCanvas( false )
, mbWps( false )
, mbTextBox( false )
, mbHasLinkedTxbx( false )
, maDiagramDoms( 0 )
{
if ( pServiceName )
msServiceName = OUString::createFromAscii( pServiceName );
setDefaults(bDefaultHeight);
}
Shape::Shape( const ShapePtr& pSourceShape )
: maChildren()
, mpTextBody(pSourceShape->mpTextBody)
, mpLinePropertiesPtr( pSourceShape->mpLinePropertiesPtr )
, mpShapeRefLinePropPtr( pSourceShape->mpShapeRefLinePropPtr )
, mpFillPropertiesPtr( pSourceShape->mpFillPropertiesPtr )
, mpShapeRefFillPropPtr( pSourceShape->mpShapeRefFillPropPtr )
, mpGraphicPropertiesPtr( pSourceShape->mpGraphicPropertiesPtr )
, mpCustomShapePropertiesPtr( pSourceShape->mpCustomShapePropertiesPtr )
, mpTablePropertiesPtr( pSourceShape->mpTablePropertiesPtr )
, mp3DPropertiesPtr( pSourceShape->mp3DPropertiesPtr )
, mpEffectPropertiesPtr (pSourceShape->mpEffectPropertiesPtr)
, mpShapeRefEffectPropPtr(pSourceShape->mpShapeRefEffectPropPtr)
, maShapeProperties( pSourceShape->maShapeProperties )
, mpMasterTextListStyle( pSourceShape->mpMasterTextListStyle )
, mxShape()
, msServiceName( pSourceShape->msServiceName )
, msName( pSourceShape->msName )
, msInternalName( pSourceShape->msInternalName )
, msId( pSourceShape->msId )
, mnSubType( pSourceShape->mnSubType )
, moSubTypeIndex( pSourceShape->moSubTypeIndex )
, maShapeStyleRefs( pSourceShape->maShapeStyleRefs )
, maSize( pSourceShape->maSize )
, maPosition( pSourceShape->maPosition )
, meFrameType( pSourceShape->meFrameType )
, mnRotation( pSourceShape->mnRotation )
, mnDiagramRotation( pSourceShape->mnDiagramRotation )
, mbFlipH( pSourceShape->mbFlipH )
, mbFlipV( pSourceShape->mbFlipV )
, mbHidden( pSourceShape->mbHidden )
, mbHiddenMasterShape( pSourceShape->mbHiddenMasterShape )
, mbLockedCanvas( pSourceShape->mbLockedCanvas )
, mbWps( pSourceShape->mbWps )
, mbTextBox( pSourceShape->mbTextBox )
, maLinkedTxbxAttr()
, mbHasLinkedTxbx(false)
, maDiagramDoms( pSourceShape->maDiagramDoms )
{}
Shape::~Shape()
{
}
table::TablePropertiesPtr const & Shape::getTableProperties()
{
if ( !mpTablePropertiesPtr.get() )
mpTablePropertiesPtr.reset( new table::TableProperties() );
return mpTablePropertiesPtr;
}
void Shape::setDefaults(bool bHeight)
{
maDefaultShapeProperties.setProperty(PROP_TextAutoGrowHeight, false);
maDefaultShapeProperties.setProperty(PROP_TextWordWrap, true);
maDefaultShapeProperties.setProperty(PROP_TextLeftDistance, static_cast< sal_Int32 >( 250 ));
maDefaultShapeProperties.setProperty(PROP_TextUpperDistance, static_cast< sal_Int32 >( 125 ));
maDefaultShapeProperties.setProperty(PROP_TextRightDistance, static_cast< sal_Int32 >( 250 ));
maDefaultShapeProperties.setProperty(PROP_TextLowerDistance, static_cast< sal_Int32 >( 125 ));
if (bHeight)
maDefaultShapeProperties.setProperty(PROP_CharHeight, static_cast< float >( 18.0 ));
maDefaultShapeProperties.setProperty(PROP_TextVerticalAdjust, TextVerticalAdjust_TOP);
maDefaultShapeProperties.setProperty(PROP_ParaAdjust, static_cast< sal_Int16 >( ParagraphAdjust_LEFT )); // check for RTL?
}
::oox::vml::OleObjectInfo& Shape::setOleObjectType()
{
OSL_ENSURE( meFrameType == FRAMETYPE_GENERIC, "Shape::setOleObjectType - multiple frame types" );
meFrameType = FRAMETYPE_OLEOBJECT;
mxOleObjectInfo.reset( new ::oox::vml::OleObjectInfo( true ) );
return *mxOleObjectInfo;
}
ChartShapeInfo& Shape::setChartType( bool bEmbedShapes )
{
OSL_ENSURE( meFrameType == FRAMETYPE_GENERIC, "Shape::setChartType - multiple frame types" );
meFrameType = FRAMETYPE_CHART;
msServiceName = "com.sun.star.drawing.OLE2Shape";
mxChartShapeInfo.reset( new ChartShapeInfo( bEmbedShapes ) );
return *mxChartShapeInfo;
}
void Shape::setDiagramType()
{
OSL_ENSURE( meFrameType == FRAMETYPE_GENERIC, "Shape::setDiagramType - multiple frame types" );
meFrameType = FRAMETYPE_DIAGRAM;
msServiceName = "com.sun.star.drawing.GroupShape";
mnSubType = 0;
}
void Shape::setTableType()
{
OSL_ENSURE( meFrameType == FRAMETYPE_GENERIC, "Shape::setTableType - multiple frame types" );
meFrameType = FRAMETYPE_TABLE;
msServiceName = "com.sun.star.drawing.TableShape";
mnSubType = 0;
}
void Shape::setServiceName( const sal_Char* pServiceName )
{
if ( pServiceName )
msServiceName = OUString::createFromAscii( pServiceName );
}
const ShapeStyleRef* Shape::getShapeStyleRef( sal_Int32 nRefType ) const
{
ShapeStyleRefMap::const_iterator aIt = maShapeStyleRefs.find( nRefType );
return (aIt == maShapeStyleRefs.end()) ? nullptr : &aIt->second;
}
void Shape::addShape(
::oox::core::XmlFilterBase& rFilterBase,
const Theme* pTheme,
const Reference< XShapes >& rxShapes,
const basegfx::B2DHomMatrix& aTransformation,
FillProperties& rShapeOrParentShapeFillProps,
ShapeIdMap* pShapeMap )
{
SAL_INFO("oox.drawingml", "Shape::addShape: id='" << msId << "'");
try
{
OUString sServiceName( msServiceName );
if( !sServiceName.isEmpty() )
{
basegfx::B2DHomMatrix aMatrix( aTransformation );
Reference< XShape > xShape( createAndInsert( rFilterBase, sServiceName, pTheme, rxShapes, false, false, aMatrix, rShapeOrParentShapeFillProps ) );
if( pShapeMap && !msId.isEmpty() )
{
(*pShapeMap)[ msId ] = shared_from_this();
}
// if this is a group shape, we have to add also each child shape
Reference< XShapes > xShapes( xShape, UNO_QUERY );
if ( xShapes.is() )
addChildren( rFilterBase, *this, pTheme, xShapes, pShapeMap, aMatrix );
if( meFrameType == FRAMETYPE_DIAGRAM )
{
if( !SvtFilterOptions::Get().IsSmartArt2Shape() )
keepDiagramCompatibilityInfo( rFilterBase );
}
}
}
catch( const Exception& e )
{
SAL_WARN( "oox.drawingml", "Shape::addShape: " << e );
}
}
void Shape::setLockedCanvas(bool bLockedCanvas)
{
mbLockedCanvas = bLockedCanvas;
}
void Shape::setWps(bool bWps)
{
mbWps = bWps;
}
void Shape::setTextBox(bool bTextBox)
{
mbTextBox = bTextBox;
}
void Shape::applyShapeReference( const Shape& rReferencedShape, bool bUseText )
{
SAL_INFO("oox.drawingml", "Shape::applyShapeReference: apply '" << rReferencedShape.msId << "' to '" << msId << "'");
if ( rReferencedShape.mpTextBody.get() && bUseText )
mpTextBody = std::make_shared<TextBody>( *rReferencedShape.mpTextBody.get() );
else
mpTextBody.reset();
maShapeProperties = rReferencedShape.maShapeProperties;
mpShapeRefLinePropPtr = std::make_shared<LineProperties>( rReferencedShape.getActualLineProperties(nullptr) );
mpShapeRefFillPropPtr = std::make_shared<FillProperties>( rReferencedShape.getActualFillProperties(nullptr, nullptr) );
mpCustomShapePropertiesPtr = std::make_shared<CustomShapeProperties>( *rReferencedShape.mpCustomShapePropertiesPtr.get() );
mpTablePropertiesPtr = table::TablePropertiesPtr( rReferencedShape.mpTablePropertiesPtr.get() ? new table::TableProperties( *rReferencedShape.mpTablePropertiesPtr.get() ) : nullptr );
mpShapeRefEffectPropPtr = std::make_shared<EffectProperties>( rReferencedShape.getActualEffectProperties(nullptr) );
mpMasterTextListStyle = std::make_shared<TextListStyle>( *rReferencedShape.mpMasterTextListStyle.get() );
maSize = rReferencedShape.maSize;
maPosition = rReferencedShape.maPosition;
mnRotation = rReferencedShape.mnRotation;
mbFlipH = rReferencedShape.mbFlipH;
mbFlipV = rReferencedShape.mbFlipV;
mbHidden = rReferencedShape.mbHidden;
}
void Shape::addChildren( ::oox::core::XmlFilterBase& rFilterBase,
const Theme* pTheme,
const Reference< XShapes >& rxShapes,
basegfx::B2DHomMatrix const & aTransformation )
{
addChildren(rFilterBase, *this, pTheme, rxShapes, nullptr, aTransformation);
}
struct ActionLockGuard
{
explicit ActionLockGuard(Reference<drawing::XShape> const& xShape)
: m_xLockable(xShape, UNO_QUERY)
{
if (m_xLockable.is()) {
m_xLockable->addActionLock();
}
}
~ActionLockGuard()
{
if (m_xLockable.is()) {
m_xLockable->removeActionLock();
}
}
private:
Reference<document::XActionLockable> m_xLockable;
};
// for group shapes, the following method is also adding each child
void Shape::addChildren(
XmlFilterBase& rFilterBase,
Shape& rMaster,
const Theme* pTheme,
const Reference< XShapes >& rxShapes,
ShapeIdMap* pShapeMap,
const basegfx::B2DHomMatrix& aTransformation )
{
basegfx::B2DHomMatrix aChildTransformation;
aChildTransformation.translate(-maChPosition.X, -maChPosition.Y);
aChildTransformation.scale(1/(maChSize.Width ? maChSize.Width : 1.0), 1/(maChSize.Height ? maChSize.Height : 1.0));
// Child position and size is typically non-zero, but it's allowed to have
// it like that, and in that case Word ignores the parent transformation
// (excluding translate component).
if (!mbWps || maChPosition.X || maChPosition.Y || maChSize.Width || maChSize.Height)
{
aChildTransformation *= aTransformation;
}
else
{
basegfx::B2DVector aScale, aTranslate;
double fRotate, fShearX;
aTransformation.decompose(aScale, aTranslate, fRotate, fShearX);
aChildTransformation.translate(aTranslate.getX(), aTranslate.getY());
}
SAL_INFO("oox.drawingml", "Shape::addChildren: parent matrix:\n"
<< aChildTransformation.get(0, 0) << " "
<< aChildTransformation.get(0, 1) << " "
<< aChildTransformation.get(0, 2) << "\n"
<< aChildTransformation.get(1, 0) << " "
<< aChildTransformation.get(1, 1) << " "
<< aChildTransformation.get(1, 2) << "\n"
<< aChildTransformation.get(2, 0) << " "
<< aChildTransformation.get(2, 1) << " "
<< aChildTransformation.get(2, 2));
for (auto const& child : rMaster.maChildren)
{
child->setMasterTextListStyle( mpMasterTextListStyle );
child->addShape( rFilterBase, pTheme, rxShapes, aChildTransformation, getFillProperties(), pShapeMap );
}
}
static inline void lcl_resetPropertyValue( std::vector<beans::PropertyValue>& rPropVec, const OUString& rName )
{
auto aIterator = std::find_if( rPropVec.begin(), rPropVec.end(),
[rName]( const beans::PropertyValue& rValue ) { return rValue.Name == rName; } );
if (aIterator != rPropVec.end())
rPropVec.erase( aIterator );
}
static inline void lcl_setPropertyValue( std::vector<beans::PropertyValue>& rPropVec,
const OUString& rName,
const beans::PropertyValue& rPropertyValue )
{
lcl_resetPropertyValue( rPropVec, rName );
rPropVec.push_back( rPropertyValue );
}
static inline SdrTextHorzAdjust lcl_convertAdjust( ParagraphAdjust eAdjust )
{
if (eAdjust == ParagraphAdjust_LEFT)
return SDRTEXTHORZADJUST_LEFT;
else if (eAdjust == ParagraphAdjust_RIGHT)
return SDRTEXTHORZADJUST_RIGHT;
else if (eAdjust == ParagraphAdjust_CENTER)
return SDRTEXTHORZADJUST_CENTER;
return SDRTEXTHORZADJUST_LEFT;
}
static inline void lcl_createPresetShape(uno::Reference<drawing::XShape>& xShape,
const OUString& rClass, const OUString& rPresetType,
const CustomShapePropertiesPtr& pCustomShapePropertiesPtr,
const TextBodyPtr& pTextBody,
const GraphicHelper& rGraphicHelper)
{
if (!xShape.is() || !pCustomShapePropertiesPtr || !pTextBody)
return;
uno::Reference<drawing::XEnhancedCustomShapeDefaulter> xDefaulter( xShape,
uno::UNO_QUERY );
if (!xDefaulter.is() || rClass.isEmpty())
return;
Reference<XPropertySet> xSet( xShape, UNO_QUERY );
if (!xSet.is())
return;
auto aGdList = pCustomShapePropertiesPtr->getAdjustmentGuideList();
Sequence<drawing::EnhancedCustomShapeAdjustmentValue> aAdjustment(
aGdList.size() ? aGdList.size() : 1 );
int nIndex = 0;
for (auto& aEntry : aGdList)
{
double fAngle = NormAngle36000( aEntry.maFormula.toDouble() / -600.0 );
fAngle = 360.0 - fAngle / 100.0;
aAdjustment[nIndex].Value <<= fAngle;
aAdjustment[nIndex++].State = css::beans::PropertyState_DIRECT_VALUE;
}
if (!aGdList.size())
{
// Default angle
double fAngle = 0;
if (rClass == "fontwork-arch-up-curve")
fAngle = 180;
aAdjustment[0].Value <<= fAngle;
aAdjustment[0].State = css::beans::PropertyState_DIRECT_VALUE;
}
// Set properties
xSet->setPropertyValue( UNO_NAME_TEXT_AUTOGROWHEIGHT, uno::makeAny( false ) );
xSet->setPropertyValue( UNO_NAME_TEXT_AUTOGROWWIDTH, uno::makeAny( false ) );
xSet->setPropertyValue( UNO_NAME_FILLSTYLE, uno::makeAny( drawing::FillStyle_SOLID ) );
const TextParagraphVector& rParagraphs = pTextBody->getParagraphs();
if (rParagraphs.size() && rParagraphs[0]->getRuns().size())
{
std::shared_ptr<TextParagraph> pParagraph = rParagraphs[0];
std::shared_ptr<TextRun> pRun = pParagraph->getRuns()[0];
TextCharacterProperties& pProperties = pRun->getTextCharacterProperties();
if (pProperties.moBold.has() && pProperties.moBold.get())
{
xSet->setPropertyValue( UNO_NAME_CHAR_WEIGHT, uno::makeAny( css::awt::FontWeight::BOLD ) );
}
if (pProperties.moItalic.has() && pProperties.moItalic.get())
{
xSet->setPropertyValue( UNO_NAME_CHAR_POSTURE, uno::makeAny( css::awt::FontSlant::FontSlant_ITALIC ) );
}
if (pProperties.moHeight.has())
{
sal_Int32 nHeight = pProperties.moHeight.get() / 100;
xSet->setPropertyValue( UNO_NAME_CHAR_HEIGHT, uno::makeAny( nHeight ) );
}
if (pProperties.maFillProperties.maFillColor.isUsed())
{
const sal_Int32 aFillColor = static_cast<sal_Int32>(
pProperties.maFillProperties.maFillColor.getColor( rGraphicHelper ).GetRGBColor() );
xSet->setPropertyValue( UNO_NAME_FILLCOLOR, uno::makeAny( aFillColor ) );
}
else
{
// Set default color
xSet->setPropertyValue( UNO_NAME_FILLCOLOR, uno::makeAny( COL_BLACK ) );
}
{
ParagraphAdjust eAdjust = ParagraphAdjust_LEFT;
if (pParagraph->getProperties().getParaAdjust())
eAdjust = pParagraph->getProperties().getParaAdjust().get();
xSet->setPropertyValue( "ParaAdjust", uno::makeAny( eAdjust ) );
SvxShape* pShape = SvxShape::getImplementation( xShape );
assert(pShape);
SdrTextHorzAdjust eHorzAdjust = lcl_convertAdjust( eAdjust );
pShape->GetSdrObject()->SetMergedItem( SdrTextHorzAdjustItem( eHorzAdjust ) );
}
}
// Apply vertical adjustment for text on arc
SvxShape* pShape = SvxShape::getImplementation(xShape);
assert(pShape);
if (rClass == "fontwork-arch-up-curve")
pShape->GetSdrObject()->SetMergedItem( SdrTextVertAdjustItem( SdrTextVertAdjust::SDRTEXTVERTADJUST_BOTTOM ) );
else if (rClass == "fontwork-arch-down-curve")
pShape->GetSdrObject()->SetMergedItem( SdrTextVertAdjustItem( SdrTextVertAdjust::SDRTEXTVERTADJUST_TOP ) );
// Apply preset shape
xDefaulter->createCustomShapeDefaults( rClass );
auto aGeomPropSeq = xSet->getPropertyValue( "CustomShapeGeometry" )
.get<uno::Sequence<beans::PropertyValue>>();
auto aGeomPropVec
= comphelper::sequenceToContainer<std::vector<beans::PropertyValue>>(
aGeomPropSeq );
// Reset old properties
const OUString sCoordinateSize( "CoordinateSize" );
const OUString sEquations( "Equations" );
const OUString sPath( "Path" );
const OUString sTextPath( "TextPath" );
const OUString sAdjustmentValues( "AdjustmentValues" );
const OUString sPresetTextWarp( "PresetTextWarp" );
lcl_resetPropertyValue( aGeomPropVec, sCoordinateSize );
lcl_resetPropertyValue( aGeomPropVec, sEquations );
lcl_resetPropertyValue( aGeomPropVec, sPath );
// Some shapes don't need scaling
bool bScale = true;
if ( rPresetType == "textRingInside"
|| rPresetType == "textRingOutside"
|| rPresetType == "textCirclePour" )
{
bScale = false;
}
// Apply geometry properties
uno::Sequence<beans::PropertyValue> aPropertyValues(
comphelper::InitPropertySequence(
{ { sTextPath, uno::makeAny( true ) },
{ "TextPathMode",
uno::Any( drawing::EnhancedCustomShapeTextPathMode_PATH ) },
{ "ScaleX", uno::Any( bScale ) } } ) );
lcl_setPropertyValue( aGeomPropVec, sTextPath,
comphelper::makePropertyValue( sTextPath, aPropertyValues ) );
lcl_setPropertyValue( aGeomPropVec, sPresetTextWarp,
comphelper::makePropertyValue( sPresetTextWarp, rPresetType ) );
if ( rClass == "fontwork-arch-up-curve" || rClass == "fontwork-circle-curve"
|| rClass == "fontwork-arch-down-curve" || rClass == "fontwork-open-circle-curve" )
lcl_setPropertyValue( aGeomPropVec, sAdjustmentValues,
comphelper::makePropertyValue( sAdjustmentValues, aAdjustment ) );
xSet->setPropertyValue(
"CustomShapeGeometry",
uno::makeAny(comphelper::containerToSequence(aGeomPropVec)));
}
Reference< XShape > const & Shape::createAndInsert(
::oox::core::XmlFilterBase& rFilterBase,
const OUString& rServiceName,
const Theme* pTheme,
const css::uno::Reference< css::drawing::XShapes >& rxShapes,
bool bClearText,
bool bDoNotInsertEmptyTextBody,
basegfx::B2DHomMatrix& aParentTransformation,
FillProperties& rShapeOrParentShapeFillProps )
{
bool bIsEmbMedia = false;
SAL_INFO("oox.drawingml", "Shape::createAndInsert: id='" << msId << "' service='" << rServiceName << "'");
formulaimport::XmlStreamBuilder * pMathXml(nullptr);
if (mpTextBody.get())
{
for (auto const& it : mpTextBody->getParagraphs())
{
if (it->HasMathXml())
{
if (!mpTextBody->isEmpty() || pMathXml != nullptr)
{
SAL_WARN("oox.drawingml", "losing a Math object...");
}
else
{
pMathXml = &it->GetMathXml();
}
}
}
}
// tdf#90403 PowerPoint ignores a:ext cx and cy values of p:xfrm, and uses real table width and height
if ( mpTablePropertiesPtr.get() && rServiceName == "com.sun.star.drawing.TableShape" )
{
maSize.Width = 0;
for (auto const& elem : mpTablePropertiesPtr->getTableGrid())
{
maSize.Width = o3tl::saturating_add(maSize.Width, static_cast<sal_Int32>(elem));
}
maSize.Height = 0;
for (auto const& elem : mpTablePropertiesPtr->getTableRows())
{
maSize.Height = o3tl::saturating_add(maSize.Height, elem.getHeight());
}
}
awt::Rectangle aShapeRectHmm( maPosition.X / EMU_PER_HMM, maPosition.Y / EMU_PER_HMM, maSize.Width / EMU_PER_HMM, maSize.Height / EMU_PER_HMM );
OUString aServiceName;
if (pMathXml)
{
// convert this shape to OLE
aServiceName = "com.sun.star.drawing.OLE2Shape";
msServiceName = aServiceName;
meFrameType = FRAMETYPE_GENERIC; // not OLEOBJECT, no stream in package
mnSubType = 0;
}
else if (rServiceName == "com.sun.star.drawing.GraphicObjectShape" &&
mpGraphicPropertiesPtr && !mpGraphicPropertiesPtr->m_sMediaPackageURL.isEmpty())
{
aServiceName = finalizeServiceName( rFilterBase, "com.sun.star.presentation.MediaShape", aShapeRectHmm );
bIsEmbMedia = true;
}
else
{
aServiceName = finalizeServiceName( rFilterBase, rServiceName, aShapeRectHmm );
}
bool bIsCustomShape = ( aServiceName == "com.sun.star.drawing.CustomShape" ||
aServiceName == "com.sun.star.drawing.ConnectorShape" );
bool bUseRotationTransform = ( !mbWps ||
aServiceName == "com.sun.star.drawing.LineShape" ||
aServiceName == "com.sun.star.drawing.GroupShape" ||
mbFlipH ||
mbFlipV );
basegfx::B2DHomMatrix aTransformation;
if (bUseRotationTransform && mnDiagramRotation != 0)
{
// rotate diagram's shape around object's center before sizing
aTransformation.translate(-0.5, -0.5);
aTransformation.rotate(basegfx::deg2rad(mnDiagramRotation / 60000.0));
aTransformation.translate(0.5, 0.5);
}
if( maSize.Width != 1 || maSize.Height != 1)
{
// take care there are no zeros used by error
aTransformation.scale(
maSize.Width ? maSize.Width : 1.0,
maSize.Height ? maSize.Height : 1.0 );
}
bool bInGroup = !aParentTransformation.isIdentity();
if( mbFlipH || mbFlipV || mnRotation != 0 || bInGroup )
{
// calculate object's center
basegfx::B2DPoint aCenter(0.5, 0.5);
aCenter *= aTransformation;
// center object at origin
aTransformation.translate( -aCenter.getX(), -aCenter.getY() );
if( !bIsCustomShape && ( mbFlipH || mbFlipV ) )
{
// mirror around object's center
aTransformation.scale( mbFlipH ? -1.0 : 1.0, mbFlipV ? -1.0 : 1.0 );
}
if( bUseRotationTransform )
{
// OOXML flips shapes before rotating them.
if( bIsCustomShape )
{
basegfx::B2DVector aScale, aTranslate;
double fRotate, fShearX;
aParentTransformation.decompose(aScale, aTranslate, fRotate, fShearX);
// A negative scale means that the shape needs to be flipped
if(aScale.getX() < 0)
{
mbFlipH = !mbFlipH;
aTransformation.scale(-1, 1);
}
if(aScale.getY() < 0)
{
mbFlipV = !mbFlipV;
aTransformation.scale(1, -1);
}
}
// rotate around object's center
aTransformation.rotate(basegfx::deg2rad(static_cast<double>(mnRotation) / 60000.0));
}
// move object back from center
aTransformation.translate( aCenter.getX(), aCenter.getY() );
}
if( maPosition.X != 0 || maPosition.Y != 0)
{
// if global position is used, add it to transformation
if (mbWps && !bInGroup)
aTransformation.translate( maPosition.X * EMU_PER_HMM, maPosition.Y * EMU_PER_HMM);
else
aTransformation.translate( maPosition.X, maPosition.Y );
}
aTransformation = aParentTransformation*aTransformation;
aParentTransformation = aTransformation;
aTransformation.scale(1/double(EMU_PER_HMM), 1/double(EMU_PER_HMM));
if( bIsCustomShape && mbFlipH != mbFlipV )
{
basegfx::B2DVector aScale, aTranslate;
double fRotate, fShearX;
aTransformation.decompose(aScale, aTranslate, fRotate, fShearX);
if(fRotate != 0)
{
// calculate object's center
basegfx::B2DPoint aCenter(0.5, 0.5);
aCenter *= aTransformation;
aTransformation.translate( -aCenter.getX(), -aCenter.getY() );
// OOXML flips shapes before rotating them, so the rotation needs to be inverted
aTransformation.rotate( fRotate * -2.0 );
aTransformation.translate( aCenter.getX(), aCenter.getY() );
}
}
// special for lineshape
if ( aServiceName == "com.sun.star.drawing.LineShape" )
{
::basegfx::B2DPolygon aPoly;
aPoly.insert( 0, ::basegfx::B2DPoint( 0, 0 ) );
aPoly.insert( 1, ::basegfx::B2DPoint( maSize.Width ? 1 : 0, maSize.Height ? 1 : 0 ) );
aPoly.transform( aTransformation );
// now creating the corresponding PolyPolygon
sal_Int32 i, nNumPoints = aPoly.count();
uno::Sequence< awt::Point > aPointSequence( nNumPoints );
awt::Point* pPoints = aPointSequence.getArray();
uno::Reference<lang::XServiceInfo> xModelInfo(rFilterBase.getModel(), uno::UNO_QUERY);
bool bIsWriter = xModelInfo->supportsService("com.sun.star.text.TextDocument");
for( i = 0; i < nNumPoints; ++i )
{
const basegfx::B2DPoint aPoint( aPoly.getB2DPoint( i ) );
// tdf#106792 Not needed anymore due to the change in SdrPathObj::NbcResize:
// tdf#96674: Guard against zero width or height.
if (bIsWriter && bInGroup)
// Writer's draw page is in twips, and these points get passed
// to core without any unit conversion when Writer
// postprocesses only the group shape itself.
pPoints[i] = awt::Point(static_cast<sal_Int32>(convertMm100ToTwip(aPoint.getX())), static_cast<sal_Int32>(convertMm100ToTwip(aPoint.getY())));
else
pPoints[i] = awt::Point(static_cast<sal_Int32>(aPoint.getX()), static_cast<sal_Int32>(aPoint.getY()));
}
uno::Sequence< uno::Sequence< awt::Point > > aPolyPolySequence( 1 );
aPolyPolySequence.getArray()[ 0 ] = aPointSequence;
maShapeProperties.setProperty(PROP_PolyPolygon, aPolyPolySequence);
}
else if ( aServiceName == "com.sun.star.drawing.ConnectorShape" )
{
::basegfx::B2DPolygon aPoly;
aPoly.insert( 0, ::basegfx::B2DPoint( 0, 0 ) );
aPoly.insert( 1, ::basegfx::B2DPoint( maSize.Width ? 1 : 0, maSize.Height ? 1 : 0 ) );
aPoly.transform( aTransformation );
basegfx::B2DPoint aStartPosition( aPoly.getB2DPoint( 0 ) );
basegfx::B2DPoint aEndPosition( aPoly.getB2DPoint( 1 ) );
awt::Point aAWTStartPosition( static_cast< sal_Int32 >( aStartPosition.getX() ), static_cast< sal_Int32 >( aStartPosition.getY() ) );
awt::Point aAWTEndPosition( static_cast< sal_Int32 >( aEndPosition.getX() ), static_cast< sal_Int32 >( aEndPosition.getY() ) );
maShapeProperties.setProperty(PROP_StartPosition, aAWTStartPosition);
maShapeProperties.setProperty(PROP_EndPosition, aAWTEndPosition);
}
else
{
// now set transformation for this object
HomogenMatrix3 aMatrix;
aMatrix.Line1.Column1 = aTransformation.get(0,0);
aMatrix.Line1.Column2 = aTransformation.get(0,1);
aMatrix.Line1.Column3 = aTransformation.get(0,2);
aMatrix.Line2.Column1 = aTransformation.get(1,0);
aMatrix.Line2.Column2 = aTransformation.get(1,1);
aMatrix.Line2.Column3 = aTransformation.get(1,2);
aMatrix.Line3.Column1 = aTransformation.get(2,0);
aMatrix.Line3.Column2 = aTransformation.get(2,1);
aMatrix.Line3.Column3 = aTransformation.get(2,2);
maShapeProperties.setProperty(PROP_Transformation, aMatrix);
}
Reference< lang::XMultiServiceFactory > xServiceFact( rFilterBase.getModel(), UNO_QUERY_THROW );
if ( !mxShape.is() )
mxShape.set( xServiceFact->createInstance( aServiceName ), UNO_QUERY_THROW );
Reference< XPropertySet > xSet( mxShape, UNO_QUERY );
if( mxShape.is() && xSet.is() )
{
if( !msName.isEmpty() )
{
Reference< container::XNamed > xNamed( mxShape, UNO_QUERY );
if( xNamed.is() )
xNamed->setName( msName );
}
if (aServiceName != "com.sun.star.text.TextFrame")
rxShapes->add( mxShape );
if ( mbHidden || mbHiddenMasterShape )
{
SAL_INFO("oox.drawingml", "Shape::createAndInsert: invisible shape with id='" << msId << "'");
const OUString sVisible( "Visible" );
xSet->setPropertyValue( sVisible, Any( false ) );
// In Excel hidden means not printed, let's use visibility for now until that's handled separately
const OUString sPrintable( "Printable" );
xSet->setPropertyValue( sPrintable, Any( false ) );
}
ActionLockGuard const alg(mxShape);
// sj: removing default text of placeholder objects such as SlideNumberShape or HeaderShape
if ( bClearText )
{
uno::Reference< text::XText > xText( mxShape, uno::UNO_QUERY );
if ( xText.is() )
{
xText->setString( "" );
}
}
if (pMathXml)
{
// the "EmbeddedObject" property is read-only, so we have to create
// the shape first, and it can be read only after the shape is
// inserted into the document, so delay the actual import until here
SvGlobalName name(SO3_SM_CLASSID);
xSet->setPropertyValue("CLSID", uno::makeAny(name.GetHexName()));
uno::Reference<embed::XEmbeddedObject> const xObj(
xSet->getPropertyValue("EmbeddedObject"), uno::UNO_QUERY);
uno::Reference<uno::XInterface> const xMathModel(xObj->getComponent());
oox::FormulaImportBase *const pMagic(
dynamic_cast<oox::FormulaImportBase*>(xMathModel.get()));
assert(pMagic);
pMagic->readFormulaOoxml(*pMathXml);
}
const GraphicHelper& rGraphicHelper = rFilterBase.getGraphicHelper();
::Color nLinePhClr(0xffffffff);
::Color nFillPhClr(0xffffffff);
// TODO: use ph color when applying effect properties
//sal_Int32 nEffectPhClr = -1;
if( pTheme )
{
if( const ShapeStyleRef* pLineRef = getShapeStyleRef( XML_lnRef ) )
{
LineProperties aLineProperties;
aLineProperties.maLineFill.moFillType = XML_noFill;
if( const LineProperties* pLineProps = pTheme->getLineStyle( pLineRef->mnThemedIdx ) )
aLineProperties.assignUsed( *pLineProps );
nLinePhClr = pLineRef->maPhClr.getColor( rGraphicHelper );
// Store style-related properties to InteropGrabBag to be able to export them back
uno::Sequence<beans::PropertyValue> aProperties = comphelper::InitPropertySequence(
{
{"SchemeClr", uno::makeAny(pLineRef->maPhClr.getSchemeName())},
{"Idx", uno::makeAny(pLineRef->mnThemedIdx)},
{"Color", uno::makeAny(nLinePhClr)},
{"LineStyle", uno::makeAny(aLineProperties.getLineStyle())},
{"LineJoint", uno::makeAny(aLineProperties.getLineJoint())},
{"LineWidth", uno::makeAny(aLineProperties.getLineWidth())},
{"Transformations", uno::makeAny(pLineRef->maPhClr.getTransformations())}
});
putPropertyToGrabBag( "StyleLnRef", Any( aProperties ) );
}
if( const ShapeStyleRef* pFillRef = getShapeStyleRef( XML_fillRef ) )
{
nFillPhClr = pFillRef->maPhClr.getColor( rGraphicHelper );
OUString sColorScheme = pFillRef->maPhClr.getSchemeName();
if( !sColorScheme.isEmpty() )
{
uno::Sequence<beans::PropertyValue> aProperties = comphelper::InitPropertySequence(
{
{"SchemeClr", uno::makeAny(sColorScheme)},
{"Idx", uno::makeAny(pFillRef->mnThemedIdx)},
{"Color", uno::makeAny(nFillPhClr)},
{"Transformations", uno::makeAny(pFillRef->maPhClr.getTransformations())}
});
putPropertyToGrabBag( "StyleFillRef", Any( aProperties ) );
}
}
if( const ShapeStyleRef* pEffectRef = getShapeStyleRef( XML_effectRef ) )
{
// TODO: use ph color when applying effect properties
// nEffectPhClr = pEffectRef->maPhClr.getColor( rGraphicHelper );
// Store style-related properties to InteropGrabBag to be able to export them back
uno::Sequence<beans::PropertyValue> aProperties = comphelper::InitPropertySequence(
{
{"SchemeClr", uno::makeAny(pEffectRef->maPhClr.getSchemeName())},
{"Idx", uno::makeAny(pEffectRef->mnThemedIdx)},
{"Transformations", uno::makeAny(pEffectRef->maPhClr.getTransformations())}
});
putPropertyToGrabBag( "StyleEffectRef", Any( aProperties ) );
}
}
ShapePropertyMap aShapeProps( rFilterBase.getModelObjectHelper() );
// add properties from textbody to shape properties
if( mpTextBody.get() )
{
mpTextBody->getTextProperties().pushRotationAdjustments();
aShapeProps.assignUsed( mpTextBody->getTextProperties().maPropertyMap );
// Push char properties as well - specifically useful when this is a placeholder
if( mpMasterTextListStyle && mpMasterTextListStyle->getListStyle()[0]->getTextCharacterProperties().moHeight.has() )
aShapeProps.setProperty(PROP_CharHeight, GetFontHeight( mpMasterTextListStyle->getListStyle()[0]->getTextCharacterProperties().moHeight.get() ));
}
// applying properties
aShapeProps.assignUsed( getShapeProperties() );
aShapeProps.assignUsed( maDefaultShapeProperties );
if ( bIsEmbMedia || aServiceName == "com.sun.star.drawing.GraphicObjectShape" || aServiceName == "com.sun.star.drawing.OLE2Shape" )
mpGraphicPropertiesPtr->pushToPropMap( aShapeProps, rGraphicHelper );
if ( mpTablePropertiesPtr.get() && aServiceName == "com.sun.star.drawing.TableShape" )
mpTablePropertiesPtr->pushToPropSet( rFilterBase, xSet, mpMasterTextListStyle );
FillProperties aFillProperties = getActualFillProperties(pTheme, &rShapeOrParentShapeFillProps);
aFillProperties.pushToPropMap( aShapeProps, rGraphicHelper, mnRotation, nFillPhClr, mbFlipH, mbFlipV );
LineProperties aLineProperties = getActualLineProperties(pTheme);
aLineProperties.pushToPropMap( aShapeProps, rGraphicHelper, nLinePhClr );
EffectProperties aEffectProperties = getActualEffectProperties(pTheme);
// TODO: use ph color when applying effect properties
aEffectProperties.pushToPropMap( aShapeProps, rGraphicHelper );
// applying autogrowheight property before setting shape size, because
// the shape size might be changed if currently autogrowheight is true
// we must also check that the PropertySet supports the property.
Reference< XPropertySetInfo > xSetInfo( xSet->getPropertySetInfo() );
const OUString& rPropName = PropertyMap::getPropertyName( PROP_TextAutoGrowHeight );
if( xSetInfo.is() && xSetInfo->hasPropertyByName( rPropName ) )
if( aShapeProps.hasProperty( PROP_TextAutoGrowHeight ) )
xSet->setPropertyValue( rPropName, Any( false ) );
// do not set properties at a group shape (this causes
// assertions from svx) ...
if( aServiceName != "com.sun.star.drawing.GroupShape" )
{
if (aServiceName == "com.sun.star.text.TextFrame")
{
if (mpCustomShapePropertiesPtr && mpCustomShapePropertiesPtr->getShapeTypeOverride())
{
uno::Reference<beans::XPropertySet> propertySet (mxShape, uno::UNO_QUERY);
uno::Sequence<beans::PropertyValue> aGrabBag;
propertySet->getPropertyValue("FrameInteropGrabBag") >>= aGrabBag;
sal_Int32 length = aGrabBag.getLength();
aGrabBag.realloc( length+1);
aGrabBag[length].Name = "mso-orig-shape-type";
uno::Sequence< sal_Int8 > const & aNameSeq =
mpCustomShapePropertiesPtr->getShapePresetTypeName();
OUString sShapePresetTypeName(reinterpret_cast< const char* >(
aNameSeq.getConstArray()), aNameSeq.getLength(), RTL_TEXTENCODING_UTF8);
aGrabBag[length].Value <<= sShapePresetTypeName;
propertySet->setPropertyValue("FrameInteropGrabBag",uno::makeAny(aGrabBag));
}
//If the text box has links then save the link information so that
//it can be accessed in DomainMapper_Impl.cxx while chaining the text frames.
if (isLinkedTxbx())
{
uno::Reference<beans::XPropertySet> propertySet (mxShape, uno::UNO_QUERY);
uno::Sequence<beans::PropertyValue> aGrabBag;
propertySet->getPropertyValue("FrameInteropGrabBag") >>= aGrabBag;
sal_Int32 length = aGrabBag.getLength();
aGrabBag.realloc( length + 3 );
aGrabBag[length].Name = "TxbxHasLink";
aGrabBag[length].Value <<= isLinkedTxbx();
aGrabBag[length + 1 ].Name = "Txbx-Id";
aGrabBag[length + 1 ].Value <<= getLinkedTxbxAttributes().id;
aGrabBag[length + 2 ].Name = "Txbx-Seq";
aGrabBag[length + 2 ].Value <<= getLinkedTxbxAttributes().seq;
propertySet->setPropertyValue("FrameInteropGrabBag",uno::makeAny(aGrabBag));
}
// TextFrames have BackColor, not FillColor
if (aShapeProps.hasProperty(PROP_FillColor))
{
aShapeProps.setAnyProperty(PROP_BackColor, aShapeProps.getProperty(PROP_FillColor));
aShapeProps.erase(PROP_FillColor);
}
// TextFrames have BackColorTransparency, not FillTransparence
if (aShapeProps.hasProperty(PROP_FillTransparence))
{
aShapeProps.setAnyProperty(PROP_BackColorTransparency, aShapeProps.getProperty(PROP_FillTransparence));
aShapeProps.erase(PROP_FillTransparence);
}
// TextFrames have BackGrahic, not FillBitmap
if (aShapeProps.hasProperty(PROP_FillBitmap))
{
aShapeProps.setAnyProperty(PROP_BackGraphic, aShapeProps.getProperty(PROP_FillBitmap));
aShapeProps.erase(PROP_FillBitmap);
}
if (aShapeProps.hasProperty(PROP_FillBitmapName))
{
uno::Any aAny = aShapeProps.getProperty(PROP_FillBitmapName);
OUString aFillBitmapName = aAny.get<OUString>();
uno::Reference<awt::XBitmap> xBitmap = rFilterBase.getModelObjectHelper().getFillBitmap(aFillBitmapName);
uno::Reference<graphic::XGraphic> xGraphic(xBitmap, uno::UNO_QUERY);
aShapeProps.setProperty(PROP_BackGraphic, xGraphic);
// aShapeProps.erase(PROP_FillBitmapName); // Maybe, leave the name as well
}
// And no LineColor property; individual borders can have colors
if (aShapeProps.hasProperty(PROP_LineColor))
{
uno::Reference<beans::XPropertySet> xPropertySet(mxShape, uno::UNO_QUERY);
static const sal_Int32 aBorders[] =
{
PROP_TopBorder, PROP_LeftBorder, PROP_BottomBorder, PROP_RightBorder
};
for (sal_Int32 nBorder : aBorders)
{
css::table::BorderLine2 aBorderLine = xPropertySet->getPropertyValue(PropertyMap::getPropertyName(nBorder)).get<css::table::BorderLine2>();
aBorderLine.Color = aShapeProps.getProperty(PROP_LineColor).get<sal_Int32>();
if (aLineProperties.moLineWidth.has())
aBorderLine.LineWidth = convertEmuToHmm(aLineProperties.moLineWidth.get());
aShapeProps.setProperty(nBorder, aBorderLine);
}
aShapeProps.erase(PROP_LineColor);
}
if(mnRotation)
{
uno::Reference<beans::XPropertySet> xPropertySet(mxShape, uno::UNO_QUERY);
const OUString aGrabBagPropName = "FrameInteropGrabBag";
uno::Sequence<beans::PropertyValue> aGrabBag;
xPropertySet->getPropertyValue(aGrabBagPropName) >>= aGrabBag;
beans::PropertyValue aPair;
aPair.Name = "mso-rotation-angle";
aPair.Value <<= mnRotation;
if (aGrabBag.hasElements())
{
sal_Int32 nLength = aGrabBag.getLength();
aGrabBag.realloc(nLength + 1);
aGrabBag[nLength] = aPair;
}
else
{
aGrabBag.realloc(1);
aGrabBag[0] = aPair;
}
xPropertySet->setPropertyValue(aGrabBagPropName, uno::makeAny(aGrabBag));
}
// TextFrames have ShadowFormat, not individual shadow properties.
boost::optional<sal_Int32> oShadowDistance;
if (aShapeProps.hasProperty(PROP_ShadowXDistance))
{
oShadowDistance = aShapeProps.getProperty(PROP_ShadowXDistance).get<sal_Int32>();
aShapeProps.erase(PROP_ShadowXDistance);
}
if (aShapeProps.hasProperty(PROP_ShadowYDistance))
{
// There is a single 'dist' attribute, so no need to count the avg of x and y.
aShapeProps.erase(PROP_ShadowYDistance);
}
boost::optional<sal_Int32> oShadowColor;
if (aShapeProps.hasProperty(PROP_ShadowColor))
{
oShadowColor = aShapeProps.getProperty(PROP_ShadowColor).get<sal_Int32>();
aShapeProps.erase(PROP_ShadowColor);
}
if (aShapeProps.hasProperty(PROP_Shadow))
aShapeProps.erase(PROP_Shadow);
if (oShadowDistance || oShadowColor || aEffectProperties.maShadow.moShadowDir.has())
{
css::table::ShadowFormat aFormat;
if (oShadowColor)
aFormat.Color = *oShadowColor;
if (aEffectProperties.maShadow.moShadowDir.has())
{
css::table::ShadowLocation nLocation = css::table::ShadowLocation_NONE;
switch (aEffectProperties.maShadow.moShadowDir.get())
{
case 13500000:
nLocation = css::table::ShadowLocation_TOP_LEFT;
break;
case 18900000:
nLocation = css::table::ShadowLocation_TOP_RIGHT;
break;
case 8100000:
nLocation = css::table::ShadowLocation_BOTTOM_LEFT;
break;
case 2700000:
nLocation = css::table::ShadowLocation_BOTTOM_RIGHT;
break;
}
aFormat.Location = nLocation;
}
aFormat.ShadowWidth = *oShadowDistance;
aShapeProps.setProperty(PROP_ShadowFormat, aFormat);
}
}
else if (mbTextBox)
{
aShapeProps.setProperty(PROP_TextBox, true);
}
if (aServiceName != "com.sun.star.text.TextFrame" && isLinkedTxbx())
{
uno::Reference<beans::XPropertySet> propertySet (mxShape, uno::UNO_QUERY);
uno::Sequence<beans::PropertyValue> aGrabBag;
propertySet->getPropertyValue("InteropGrabBag") >>= aGrabBag;
sal_Int32 length = aGrabBag.getLength();
aGrabBag.realloc( length + 3 );
aGrabBag[length].Name = "TxbxHasLink";
aGrabBag[length].Value <<= isLinkedTxbx();
aGrabBag[length + 1 ].Name = "Txbx-Id";
aGrabBag[length + 1 ].Value <<= getLinkedTxbxAttributes().id;
aGrabBag[length + 2 ].Name = "Txbx-Seq";
aGrabBag[length + 2 ].Value <<= getLinkedTxbxAttributes().seq;
propertySet->setPropertyValue("InteropGrabBag",uno::makeAny(aGrabBag));
}
PropertySet( xSet ).setProperties( aShapeProps );
if (mbLockedCanvas)
{
putPropertyToGrabBag( "LockedCanvas", Any( true ) );
if (aServiceName == "com.sun.star.drawing.LineShape")
{
// It seems the position and size for lines inside a locked canvas is absolute.
mxShape->setPosition(awt::Point(aShapeRectHmm.X, aShapeRectHmm.Y));
mxShape->setSize(awt::Size(aShapeRectHmm.Width, aShapeRectHmm.Height));
}
}
// Store original fill and line colors of the shape and the theme color name to InteropGrabBag
std::vector<beans::PropertyValue> aProperties;
aProperties.push_back(comphelper::makePropertyValue("OriginalSolidFillClr", aShapeProps.getProperty(PROP_FillColor)));
aProperties.push_back(comphelper::makePropertyValue("OriginalLnSolidFillClr", aShapeProps.getProperty(PROP_LineColor)));
OUString sColorFillScheme = aFillProperties.maFillColor.getSchemeName();
if( !aFillProperties.maFillColor.isPlaceHolder() && !sColorFillScheme.isEmpty() )
{
aProperties.push_back(comphelper::makePropertyValue("SpPrSolidFillSchemeClr", sColorFillScheme));
aProperties.push_back(comphelper::makePropertyValue("SpPrSolidFillSchemeClrTransformations", aFillProperties.maFillColor.getTransformations()));
}
OUString sLnColorFillScheme = aLineProperties.maLineFill.maFillColor.getSchemeName();
if( !aLineProperties.maLineFill.maFillColor.isPlaceHolder() && !sLnColorFillScheme.isEmpty() )
{
aProperties.push_back(comphelper::makePropertyValue("SpPrLnSolidFillSchemeClr", sLnColorFillScheme));
aProperties.push_back(comphelper::makePropertyValue("SpPrLnSolidFillSchemeClrTransformations", aLineProperties.maLineFill.maFillColor.getTransformations()));
}
putPropertiesToGrabBag(comphelper::containerToSequence(aProperties));
// Store original gradient fill of the shape to InteropGrabBag
// LibreOffice doesn't support all the kinds of gradient so we save its complete definition
if( aShapeProps.hasProperty( PROP_FillGradient ) )
{
std::vector<beans::PropertyValue> aGradientStops;
auto aIt = aFillProperties.maGradientProps.maGradientStops.begin();
for( size_t i = 0; i < aFillProperties.maGradientProps.maGradientStops.size(); ++i )
{ // for each stop in the gradient definition:
// save position
std::vector<beans::PropertyValue> aGradientStop;
aGradientStop.push_back(comphelper::makePropertyValue("Pos", aIt->first));
OUString sStopColorScheme = aIt->second.getSchemeName();
if( sStopColorScheme.isEmpty() )
{
// save RGB color
aGradientStop.push_back(comphelper::makePropertyValue("RgbClr", aIt->second.getColor(rGraphicHelper, nFillPhClr)));
// in the case of a RGB color, transformations are already applied to
// the color with the exception of alpha transformations. We only need
// to keep the transparency value to calculate the alpha value later.
if( aIt->second.hasTransparency() )
aGradientStop.push_back(comphelper::makePropertyValue("Transparency", aIt->second.getTransparency()));
}
else
{
// save color with scheme name
aGradientStop.push_back(comphelper::makePropertyValue("SchemeClr", sStopColorScheme));
// save all color transformations
aGradientStop.push_back(comphelper::makePropertyValue("Transformations", aIt->second.getTransformations()));
}
aGradientStops.push_back(comphelper::makePropertyValue(OUString::number(i), comphelper::containerToSequence(aGradientStop)));
++aIt;
}
// If getFillProperties.moFillType is unused that means gradient is defined by a theme
// which is already saved into StyleFillRef property, so no need to save the explicit values too
if( getFillProperties().moFillType.has() )
putPropertyToGrabBag( "GradFillDefinition", uno::Any(comphelper::containerToSequence(aGradientStops)));
putPropertyToGrabBag( "OriginalGradFill", aShapeProps.getProperty(PROP_FillGradient) );
}
// store unsupported effect attributes in the grab bag
if (!aEffectProperties.m_Effects.empty())
{
std::vector<beans::PropertyValue> aEffects;
sal_uInt32 i = 0;
for (auto const& it : aEffectProperties.m_Effects)
{
PropertyValue aEffect = it->getEffect();
if( !aEffect.Name.isEmpty() )
{
std::vector<beans::PropertyValue> aEffectsGrabBag;
aEffectsGrabBag.push_back(comphelper::makePropertyValue("Attribs", aEffect.Value));
Color& aColor( it->moColor );
OUString sColorScheme = aColor.getSchemeName();
if( sColorScheme.isEmpty() )
{
// RGB color and transparency value
aEffectsGrabBag.push_back(comphelper::makePropertyValue("RgbClr", aColor.getColor(rGraphicHelper, nFillPhClr)));
aEffectsGrabBag.push_back(comphelper::makePropertyValue("RgbClrTransparency", aColor.getTransparency()));
}
else
{
// scheme color with name and transformations
aEffectsGrabBag.push_back(comphelper::makePropertyValue("SchemeClr", sColorScheme));
aEffectsGrabBag.push_back(comphelper::makePropertyValue("SchemeClrTransformations", aColor.getTransformations()));
}
aEffects.push_back(comphelper::makePropertyValue(aEffect.Name, comphelper::containerToSequence(aEffectsGrabBag)));
++i;
}
}
putPropertyToGrabBag("EffectProperties", uno::Any(comphelper::containerToSequence(aEffects)));
}
// add 3D effects if any
Sequence< PropertyValue > aCamera3DEffects = get3DProperties().getCameraAttributes();
Sequence< PropertyValue > aLightRig3DEffects = get3DProperties().getLightRigAttributes();
Sequence< PropertyValue > aShape3DEffects = get3DProperties().getShape3DAttributes( rGraphicHelper, nFillPhClr );
if( aCamera3DEffects.getLength() > 0 || aLightRig3DEffects.getLength() > 0 || aShape3DEffects.getLength() > 0 )
{
uno::Sequence<beans::PropertyValue> a3DEffectsGrabBag = comphelper::InitPropertySequence(
{
{"Camera", uno::makeAny(aCamera3DEffects)},
{"LightRig", uno::makeAny(aLightRig3DEffects)},
{"Shape3D", uno::makeAny(aShape3DEffects)}
});
putPropertyToGrabBag( "3DEffectProperties", Any( a3DEffectsGrabBag ) );
}
// store bitmap artistic effects in the grab bag
if( !mpGraphicPropertiesPtr->maBlipProps.maEffect.isEmpty() )
putPropertyToGrabBag( "ArtisticEffectProperties",
Any( mpGraphicPropertiesPtr->maBlipProps.maEffect.getEffect() ) );
}
else if( mbLockedCanvas )
{
//If we have aServiceName as "com.sun.star.drawing.GroupShape" and lockedCanvas
putPropertyToGrabBag( "LockedCanvas", Any( true ) );
}
// These can have a custom geometry, so position should be set here,
// after creation but before custom shape handling, using the position
// we got from the caller.
if (mbWps && aServiceName == "com.sun.star.drawing.LineShape")
mxShape->setPosition(maPosition);
if( bIsCustomShape )
{
if ( mbFlipH )
mpCustomShapePropertiesPtr->setMirroredX( true );
if ( mbFlipV )
mpCustomShapePropertiesPtr->setMirroredY( true );
if( getTextBody() )
{
sal_Int32 nTextRotateAngle = static_cast< sal_Int32 >( getTextBody()->getTextProperties().moRotation.get( 0 ) );
nTextRotateAngle -= mnDiagramRotation;
/* OOX measures text rotation clockwise in 1/60000th degrees,
relative to the containing shape. setTextRotateAngle wants
degrees anticlockwise. */
mpCustomShapePropertiesPtr->setTextRotateAngle( -1 * nTextRotateAngle / 60000 );
}
// Note that the script oox/source/drawingml/customshapes/generatePresetsData.pl looks
// for these ==cscode== and ==csdata== markers, so don't "clean up" these SAL_INFOs
SAL_INFO("oox.cscode", "==cscode== shape name: '" << msName << "'");
SAL_INFO("oox.csdata", "==csdata== shape name: '" << msName << "'");
mpCustomShapePropertiesPtr->pushToPropSet( xSet, mxShape, maSize );
if (mpTextBody)
{
bool bIsPresetShape = !mpTextBody->getTextProperties().msPrst.isEmpty();
if (bIsPresetShape)
{
OUString sClass;
const OUString sPresetType = mpTextBody->getTextProperties().msPrst;
sClass = PresetGeometryTypeNames::GetFontworkType( sPresetType );
lcl_createPresetShape( mxShape, sClass, sPresetType, mpCustomShapePropertiesPtr, mpTextBody, rGraphicHelper );
}
}
}
else if( getTextBody() )
getTextBody()->getTextProperties().pushVertSimulation();
PropertySet aPropertySet(mxShape);
if ( !bUseRotationTransform && mnRotation != 0 )
{
// use the same logic for rotation from VML exporter (SimpleShape::implConvertAndInsert at vmlshape.cxx)
aPropertySet.setAnyProperty( PROP_RotateAngle, makeAny( sal_Int32( NormAngle36000( mnRotation / -600 ) ) ) );
aPropertySet.setAnyProperty( PROP_HoriOrientPosition, makeAny( maPosition.X ) );
aPropertySet.setAnyProperty( PROP_VertOrientPosition, makeAny( maPosition.Y ) );
}
// in some cases, we don't have any text body.
if( getTextBody() && ( !bDoNotInsertEmptyTextBody || !mpTextBody->isEmpty() ) )
{
Reference < XText > xText( mxShape, UNO_QUERY );
if ( xText.is() ) // not every shape is supporting an XText interface (e.g. GroupShape)
{
TextCharacterProperties aCharStyleProperties;
if( const ShapeStyleRef* pFontRef = getShapeStyleRef( XML_fontRef ) )
{
if( pFontRef->mnThemedIdx != 0 )
{
if( pTheme )
if( const TextCharacterProperties* pCharProps = pTheme->getFontStyle( pFontRef->mnThemedIdx ) )
aCharStyleProperties.assignUsed( *pCharProps );
SAL_INFO("oox.drawingml", "Shape::createAndInsert: use font color");
if ( pFontRef->maPhClr.isUsed() )
{
aCharStyleProperties.maFillProperties.maFillColor = pFontRef->maPhClr;
aCharStyleProperties.maFillProperties.moFillType.set(XML_solidFill);
}
}
}
xText->setString("");
Reference < XTextCursor > xAt = xText->createTextCursor();
getTextBody()->insertAt( rFilterBase, xText, xAt, aCharStyleProperties, mpMasterTextListStyle );
}
}
else if (mbTextBox)
{
// No drawingML text, but WPS text is expected: save the theme
// character color on the shape, then.
if(const ShapeStyleRef* pFontRef = getShapeStyleRef(XML_fontRef))
{
::Color nCharColor = pFontRef->maPhClr.getColor(rGraphicHelper);
aPropertySet.setAnyProperty(PROP_CharColor, uno::makeAny(nCharColor));
}
}
}
if( mxShape.is() )
finalizeXShape( rFilterBase, rxShapes );
return mxShape;
}
void Shape::keepDiagramCompatibilityInfo( XmlFilterBase const & rFilterBase )
{
try
{
if( !maDiagramDoms.hasElements() )
return;
Reference < XPropertySet > xSet( mxShape, UNO_QUERY_THROW );
Reference < XPropertySetInfo > xSetInfo( xSet->getPropertySetInfo() );
if ( !xSetInfo.is() )
return;
const OUString aGrabBagPropName = UNO_NAME_MISC_OBJ_INTEROPGRABBAG;
if( !xSetInfo->hasPropertyByName( aGrabBagPropName ) )
return;
Sequence < PropertyValue > aGrabBag;
xSet->getPropertyValue( aGrabBagPropName ) >>= aGrabBag;
// We keep the previous items, if present
if ( aGrabBag.hasElements() )
{
sal_Int32 length = aGrabBag.getLength();
aGrabBag.realloc( length+maDiagramDoms.getLength() );
for( sal_Int32 i = 0; i < maDiagramDoms.getLength(); ++i )
aGrabBag[length+i] = maDiagramDoms[i];
xSet->setPropertyValue( aGrabBagPropName, Any( aGrabBag ) );
} else
xSet->setPropertyValue( aGrabBagPropName, Any( maDiagramDoms ) );
xSet->setPropertyValue( "MoveProtect", Any( true ) );
xSet->setPropertyValue( "SizeProtect", Any( true ) );
// Replace existing shapes with a new Graphic Object rendered
// from them
Reference < XShape > xShape( renderDiagramToGraphic( rFilterBase ) );
Reference < XShapes > xShapes( mxShape, UNO_QUERY_THROW );
while( xShapes->hasElements() )
xShapes->remove( Reference < XShape > ( xShapes->getByIndex( 0 ), UNO_QUERY_THROW ) );
xShapes->add( xShape );
}
catch( const Exception& e )
{
SAL_WARN( "oox.drawingml", "Shape::keepDiagramCompatibilityInfo: " << e );
}
}
Reference < XShape > Shape::renderDiagramToGraphic( XmlFilterBase const & rFilterBase )
{
Reference< XShape > xShape;
try
{
if( !maDiagramDoms.hasElements() )
return xShape;
// Stream in which to place the rendered shape
SvMemoryStream aTempStream;
Reference < io::XStream > xStream( new utl::OStreamWrapper( aTempStream ) );
Reference < io::XOutputStream > xOutputStream( xStream->getOutputStream() );
// Size of the rendering
awt::Size aActualSize = mxShape->getSize();
Size aResolution(Application::GetDefaultDevice()->LogicToPixel(Size(100, 100), MapMode(MapUnit::MapCM)));
double fPixelsPer100thmm = static_cast < double > ( aResolution.Width() ) / 100000.0;
awt::Size aSize = awt::Size( static_cast < sal_Int32 > ( ( fPixelsPer100thmm * aActualSize.Width ) + 0.5 ),
static_cast < sal_Int32 > ( ( fPixelsPer100thmm * aActualSize.Height ) + 0.5 ) );
Sequence< PropertyValue > aFilterData( 4 );
aFilterData[ 0 ].Name = "PixelWidth";
aFilterData[ 0 ].Value <<= aSize.Width;
aFilterData[ 1 ].Name = "PixelHeight";
aFilterData[ 1 ].Value <<= aSize.Height;
aFilterData[ 2 ].Name = "LogicalWidth";
aFilterData[ 2 ].Value <<= aActualSize.Width;
aFilterData[ 3 ].Name = "LogicalHeight";
aFilterData[ 3 ].Value <<= aActualSize.Height;
Sequence < PropertyValue > aDescriptor( 3 );
aDescriptor[ 0 ].Name = "OutputStream";
aDescriptor[ 0 ].Value <<= xOutputStream;
aDescriptor[ 1 ].Name = "FilterName";
aDescriptor[ 1 ].Value <<= OUString("SVM"); // Rendering format
aDescriptor[ 2 ].Name = "FilterData";
aDescriptor[ 2 ].Value <<= aFilterData;
Reference < lang::XComponent > xSourceDoc( mxShape, UNO_QUERY_THROW );
Reference < XGraphicExportFilter > xGraphicExporter = GraphicExportFilter::create( rFilterBase.getComponentContext() );
xGraphicExporter->setSourceDocument( xSourceDoc );
xGraphicExporter->filter( aDescriptor );
aTempStream.Seek( STREAM_SEEK_TO_BEGIN );
Graphic aGraphic;
GraphicFilter aFilter( false );
if ( aFilter.ImportGraphic( aGraphic, "", aTempStream, GRFILTER_FORMAT_NOTFOUND, nullptr, GraphicFilterImportFlags::NONE, static_cast < Sequence < PropertyValue >* > ( nullptr ) ) != ERRCODE_NONE )
{
SAL_WARN( "oox.drawingml", "Shape::renderDiagramToGraphic: Unable to import rendered stream into graphic object" );
return xShape;
}
Reference < graphic::XGraphic > xGraphic( aGraphic.GetXGraphic() );
Reference < lang::XMultiServiceFactory > xServiceFact( rFilterBase.getModel(), UNO_QUERY_THROW );
xShape.set( xServiceFact->createInstance( "com.sun.star.drawing.GraphicObjectShape" ), UNO_QUERY_THROW );
Reference < XPropertySet > xPropSet( xShape, UNO_QUERY_THROW );
xPropSet->setPropertyValue( "Graphic", Any( xGraphic ) );
xPropSet->setPropertyValue( "MoveProtect", Any( true ) );
xPropSet->setPropertyValue( "SizeProtect", Any( true ) );
xPropSet->setPropertyValue( "Name", Any( OUString( "RenderedShapes" ) ) );
}
catch( const Exception& e )
{
SAL_WARN( "oox.drawingml", "Shape::renderDiagramToGraphic: " << e );
}
return xShape;
}
void Shape::setTextBody(const TextBodyPtr & pTextBody)
{
mpTextBody = pTextBody;
}
void Shape::setMasterTextListStyle( const TextListStylePtr& pMasterTextListStyle )
{
SAL_INFO("oox.drawingml", "Shape::setMasterTextListStyle: Set master text list style to shape id='" << msId << "'");
mpMasterTextListStyle = pMasterTextListStyle;
}
OUString Shape::finalizeServiceName( XmlFilterBase& rFilter, const OUString& rServiceName, const awt::Rectangle& rShapeRect )
{
OUString aServiceName = rServiceName;
switch( meFrameType )
{
case FRAMETYPE_OLEOBJECT:
{
awt::Size aOleSize( rShapeRect.Width, rShapeRect.Height );
if( rFilter.getOleObjectHelper().importOleObject( maShapeProperties, *mxOleObjectInfo, aOleSize ) )
aServiceName = "com.sun.star.drawing.OLE2Shape";
// get the path to the representation graphic
OUString aGraphicPath;
if( !mxOleObjectInfo->maShapeId.isEmpty() )
if( ::oox::vml::Drawing* pVmlDrawing = rFilter.getVmlDrawing() )
if( const ::oox::vml::ShapeBase* pVmlShape = pVmlDrawing->getShapes().getShapeById( mxOleObjectInfo->maShapeId ) )
aGraphicPath = pVmlShape->getGraphicPath();
// import and store the graphic
if( !aGraphicPath.isEmpty() )
{
// Transfer shape's width and height to graphicsfilter (can be used by WMF/EMF)
WmfExternal aExtHeader;
aExtHeader.mapMode = 8; // MM_ANISOTROPIC
aExtHeader.xExt = rShapeRect.Width;
aExtHeader.yExt = rShapeRect.Height;
Reference< graphic::XGraphic > xGraphic = rFilter.getGraphicHelper().importEmbeddedGraphic( aGraphicPath, &aExtHeader );
if( xGraphic.is() )
maShapeProperties.setProperty(PROP_Graphic, xGraphic);
}
}
break;
default:;
}
return aServiceName;
}
void Shape::finalizeXShape( XmlFilterBase& rFilter, const Reference< XShapes >& rxShapes )
{
switch( meFrameType )
{
case FRAMETYPE_CHART:
{
OSL_ENSURE( !mxChartShapeInfo->maFragmentPath.isEmpty(), "Shape::finalizeXShape - missing chart fragment" );
if( mxShape.is() && !mxChartShapeInfo->maFragmentPath.isEmpty() ) try
{
// set the chart2 OLE class ID at the OLE shape
PropertySet aShapeProp( mxShape );
aShapeProp.setProperty( PROP_CLSID, OUString( "12dcae26-281f-416f-a234-c3086127382e" ) );
// get the XModel interface of the embedded object from the OLE shape
Reference< frame::XModel > xDocModel;
aShapeProp.getProperty( xDocModel, PROP_Model );
Reference< chart2::XChartDocument > xChartDoc( xDocModel, UNO_QUERY_THROW );
// load the chart data from the XML fragment
bool bMSO2007Doc = rFilter.isMSO2007Document();
chart::ChartSpaceModel aModel(bMSO2007Doc);
chart::ChartSpaceFragment *pChartSpaceFragment = new chart::ChartSpaceFragment(
rFilter, mxChartShapeInfo->maFragmentPath, aModel );
const OUString aThemeOverrideFragmentPath( pChartSpaceFragment->
getFragmentPathFromFirstTypeFromOfficeDoc("themeOverride") );
rFilter.importFragment( pChartSpaceFragment );
::oox::ppt::PowerPointImport *pPowerPointImport =
dynamic_cast< ::oox::ppt::PowerPointImport* >(&rFilter);
if (!aThemeOverrideFragmentPath.isEmpty() && pPowerPointImport)
{
uno::Reference< xml::sax::XFastSAXSerializable > xDoc(
rFilter.importFragment(aThemeOverrideFragmentPath), uno::UNO_QUERY_THROW);
ThemePtr pTheme = pPowerPointImport->getActualSlidePersist()->getTheme();
rFilter.importFragment(new ThemeOverrideFragmentHandler(
rFilter, aThemeOverrideFragmentPath, *pTheme), xDoc);
pPowerPointImport->getActualSlidePersist()->setTheme(pTheme);
}
// convert imported chart model to chart document
Reference< drawing::XShapes > xExternalPage;
if( !mxChartShapeInfo->mbEmbedShapes )
xExternalPage = rxShapes;
if( rFilter.getChartConverter() )
{
rFilter.getChartConverter()->convertFromModel( rFilter, aModel, xChartDoc, xExternalPage, mxShape->getPosition(), mxShape->getSize() );
if( !xChartDoc->hasInternalDataProvider() )
{
Reference< chart2::data::XDataReceiver > xDataRec( xChartDoc, UNO_QUERY );
Reference< chart2::data::XDataSource > xData( xDataRec->getUsedData(), UNO_QUERY );
if( xData->getDataSequences().getLength() <= 0 || !xData->getDataSequences()[0]->getValues().is() ||
xData->getDataSequences()[0]->getValues()->getData().getLength() <= 0 )
{
rFilter.useInternalChartDataTable( true );
rFilter.getChartConverter()->convertFromModel( rFilter, aModel, xChartDoc, xExternalPage, mxShape->getPosition(), mxShape->getSize() );
rFilter.useInternalChartDataTable( false );
}
}
}
}
catch( Exception& )
{
}
}
break;
default:;
}
}
void Shape::putPropertyToGrabBag( const OUString& sPropertyName, const Any& aPropertyValue )
{
PropertyValue aNewProperty;
aNewProperty.Name = sPropertyName;
aNewProperty.Value = aPropertyValue;
putPropertyToGrabBag( aNewProperty );
}
void Shape::putPropertyToGrabBag( const PropertyValue& pProperty )
{
Reference< XPropertySet > xSet( mxShape, UNO_QUERY );
Reference< XPropertySetInfo > xSetInfo( xSet->getPropertySetInfo() );
const OUString aGrabBagPropName = UNO_NAME_MISC_OBJ_INTEROPGRABBAG;
if( mxShape.is() && xSet.is() && xSetInfo.is() && xSetInfo->hasPropertyByName( aGrabBagPropName ) )
{
Sequence< PropertyValue > aGrabBag;
xSet->getPropertyValue( aGrabBagPropName ) >>= aGrabBag;
sal_Int32 length = aGrabBag.getLength();
aGrabBag.realloc( length + 1 );
aGrabBag[length] = pProperty;
xSet->setPropertyValue( aGrabBagPropName, Any( aGrabBag ) );
}
}
void Shape::putPropertiesToGrabBag( const Sequence< PropertyValue >& aProperties )
{
Reference< XPropertySet > xSet( mxShape, UNO_QUERY );
Reference< XPropertySetInfo > xSetInfo( xSet->getPropertySetInfo() );
const OUString aGrabBagPropName = UNO_NAME_MISC_OBJ_INTEROPGRABBAG;
if( mxShape.is() && xSet.is() && xSetInfo.is() && xSetInfo->hasPropertyByName( aGrabBagPropName ) )
{
// get existing grab bag
Sequence< PropertyValue > aGrabBag;
xSet->getPropertyValue( aGrabBagPropName ) >>= aGrabBag;
sal_Int32 length = aGrabBag.getLength();
// update grab bag size to contain the new items
aGrabBag.realloc( length + aProperties.getLength() );
// put the new items
for( sal_Int32 i=0; i < aProperties.getLength(); ++i )
{
aGrabBag[length + i].Name = aProperties[i].Name;
aGrabBag[length + i].Value = aProperties[i].Value;
}
// put it back to the shape
xSet->setPropertyValue( aGrabBagPropName, Any( aGrabBag ) );
}
}
FillProperties Shape::getActualFillProperties(const Theme* pTheme, const FillProperties* pParentShapeFillProps) const
{
FillProperties aFillProperties;
aFillProperties.moFillType = XML_noFill;
// Reference shape properties
aFillProperties.assignUsed( *mpShapeRefFillPropPtr );
// Theme
if( pTheme != nullptr )
{
if( const ShapeStyleRef* pFillRef = getShapeStyleRef( XML_fillRef ) )
{
if( const FillProperties* pFillProps = pTheme->getFillStyle( pFillRef->mnThemedIdx ) )
aFillProperties.assignUsed( *pFillProps );
}
}
// Properties specified directly for this shape
aFillProperties.assignUsed(getFillProperties());
// Parent shape's properties
if ( pParentShapeFillProps != nullptr)
if( getFillProperties().moFillType.has() && getFillProperties().moFillType.get() == XML_grpFill )
aFillProperties.assignUsed( *pParentShapeFillProps );
return aFillProperties;
}
LineProperties Shape::getActualLineProperties(const Theme* pTheme) const
{
LineProperties aLineProperties;
aLineProperties.maLineFill.moFillType = XML_noFill;
// Reference shape properties
aLineProperties.assignUsed( *mpShapeRefLinePropPtr );
// Theme
if( pTheme != nullptr )
{
if( const ShapeStyleRef* pLineRef = getShapeStyleRef( XML_lnRef ) )
{
if( const LineProperties* pLineProps = pTheme->getLineStyle( pLineRef->mnThemedIdx ) )
aLineProperties.assignUsed( *pLineProps );
}
}
// Properties specified directly for this shape
aLineProperties.assignUsed( getLineProperties() );
return aLineProperties;
}
EffectProperties Shape::getActualEffectProperties(const Theme* pTheme) const
{
EffectProperties aEffectProperties;
// Reference shape properties
aEffectProperties.assignUsed( *mpShapeRefEffectPropPtr );
// Theme
if( pTheme != nullptr )
{
if( const ShapeStyleRef* pEffectRef = getShapeStyleRef( XML_effectRef ) )
{
if( const EffectProperties* pEffectProps = pTheme->getEffectStyle( pEffectRef->mnThemedIdx ) )
aEffectProperties.assignUsed( *pEffectProps );
}
}
// Properties specified directly for this shape
aEffectProperties.assignUsed ( getEffectProperties() );
return aEffectProperties;
}
uno::Sequence< uno::Sequence< uno::Any > > Shape::resolveRelationshipsOfTypeFromOfficeDoc(core::XmlFilterBase& rFilter, const OUString& sFragment, const OUString& sType )
{
uno::Sequence< uno::Sequence< uno::Any > > xRelListTemp;
sal_Int32 counter = 0;
core::RelationsRef xRels = rFilter.importRelations( sFragment );
if ( xRels )
{
core::RelationsRef xImageRels = xRels->getRelationsFromTypeFromOfficeDoc( sType );
if ( xImageRels )
{
xRelListTemp.realloc( xImageRels->size() );
for (auto const& imageRel : *xImageRels)
{
uno::Sequence< uno::Any > diagramRelTuple (3);
// [0] => RID, [1] => InputStream [2] => extension
OUString sRelId = imageRel.second.maId;
diagramRelTuple[0] <<= sRelId;
OUString sTarget = xImageRels->getFragmentPathFromRelId( sRelId );
uno::Reference< io::XInputStream > xImageInputStrm( rFilter.openInputStream( sTarget ), uno::UNO_SET_THROW );
StreamDataSequence dataSeq;
if ( rFilter.importBinaryData( dataSeq, sTarget ) )
{
diagramRelTuple[1] <<= dataSeq;
}
diagramRelTuple[2] <<= sTarget.copy( sTarget.lastIndexOf(".") );
xRelListTemp[counter] = diagramRelTuple;
++counter;
}
xRelListTemp.realloc(counter);
}
}
return xRelListTemp;
}
} }
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V522 There might be dereferencing of a potential null pointer 'pMagic'.
↑ V1007 The value from the potentially uninitialized optional 'oShadowDistance' is used. Probably it is a mistake.