/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <SeriesOptionsItemConverter.hxx>
#include "SchWhichPairs.hxx"
#include <ItemPropertyMap.hxx>
#include <GraphicPropertyItemConverter.hxx>
#include <MultipleItemConverter.hxx>
#include <ChartModelHelper.hxx>
#include <AxisHelper.hxx>
#include <DiagramHelper.hxx>
#include <ChartTypeHelper.hxx>
#include <DataSeriesHelper.hxx>
#include <ChartModel.hxx>
#include <com/sun/star/chart/MissingValueTreatment.hpp>
#include <com/sun/star/chart2/XDataSeries.hpp>
#include <svl/eitem.hxx>
#include <svl/intitem.hxx>
#include <svl/ilstitem.hxx>
#include <rtl/math.hxx>
#include <tools/diagnose_ex.h>
#include <sal/log.hxx>
#include <functional>
#include <algorithm>
using namespace ::com::sun::star;
using namespace ::com::sun::star::chart2;
namespace chart
{
namespace wrapper
{
SeriesOptionsItemConverter::SeriesOptionsItemConverter(
const uno::Reference< frame::XModel >& xChartModel
, const uno::Reference< uno::XComponentContext > & xContext
, const uno::Reference< beans::XPropertySet >& xPropertySet
, SfxItemPool& rItemPool )
: ItemConverter( xPropertySet, rItemPool )
, m_xChartModel(xChartModel)
, m_xCC(xContext)
, m_bAttachToMainAxis(true)
, m_bSupportingOverlapAndGapWidthProperties(false)
, m_bSupportingBarConnectors(false)
, m_nBarOverlap(0)
, m_nGapWidth(100)
, m_bConnectBars(false)
, m_bSupportingAxisSideBySide(false)
, m_bGroupBarsPerAxis(true)
, m_nAllSeriesAxisIndex(-1)
, m_bSupportingStartingAngle(false)
, m_nStartingAngle(90)
, m_bClockwise(false)
, m_aSupportedMissingValueTreatments()
, m_nMissingValueTreatment(0)
, m_bSupportingPlottingOfHiddenCells(false)
, m_bIncludeHiddenCells(true)
{
try
{
uno::Reference< XDataSeries > xDataSeries( xPropertySet, uno::UNO_QUERY );
m_bAttachToMainAxis = DiagramHelper::isSeriesAttachedToMainAxis( xDataSeries );
uno::Reference< XDiagram > xDiagram( ChartModelHelper::findDiagram(xChartModel) );
uno::Reference< beans::XPropertySet > xDiagramProperties( xDiagram, uno::UNO_QUERY );
uno::Reference< XChartType > xChartType( DiagramHelper::getChartTypeOfSeries( xDiagram , xDataSeries ) );
m_xCooSys = DataSeriesHelper::getCoordinateSystemOfSeries( xDataSeries, xDiagram );
if( m_xCooSys.is() )
{
uno::Reference< chart2::XAxis > xAxis( AxisHelper::getAxis( 1, 0, m_xCooSys ) );
chart2::ScaleData aScale( xAxis->getScaleData() );
m_bClockwise = (aScale.Orientation == chart2::AxisOrientation_REVERSE);
}
sal_Int32 nDimensionCount = DiagramHelper::getDimension( xDiagram );
m_bSupportingOverlapAndGapWidthProperties = ChartTypeHelper::isSupportingOverlapAndGapWidthProperties( xChartType, nDimensionCount );
if( m_bSupportingOverlapAndGapWidthProperties )
{
sal_Int32 nAxisIndex = DataSeriesHelper::getAttachedAxisIndex(xDataSeries);
uno::Sequence< sal_Int32 > aBarPositionSequence;
uno::Reference< beans::XPropertySet > xChartTypeProps( xChartType, uno::UNO_QUERY );
if( xChartTypeProps.is() )
{
if( xChartTypeProps->getPropertyValue( "OverlapSequence" ) >>= aBarPositionSequence )
{
if( nAxisIndex >= 0 && nAxisIndex < aBarPositionSequence.getLength() )
m_nBarOverlap = aBarPositionSequence[nAxisIndex];
}
if( xChartTypeProps->getPropertyValue( "GapwidthSequence" ) >>= aBarPositionSequence )
{
if( nAxisIndex >= 0 && nAxisIndex < aBarPositionSequence.getLength() )
m_nGapWidth = aBarPositionSequence[nAxisIndex];
}
}
}
m_bSupportingBarConnectors = ChartTypeHelper::isSupportingBarConnectors( xChartType, nDimensionCount );
if( m_bSupportingBarConnectors && xDiagramProperties.is() )
{
xDiagramProperties->getPropertyValue( "ConnectBars" ) >>= m_bConnectBars;
}
m_bSupportingAxisSideBySide = ChartTypeHelper::isSupportingAxisSideBySide( xChartType, nDimensionCount );
if( m_bSupportingAxisSideBySide && xDiagramProperties.is() )
{
xDiagramProperties->getPropertyValue( "GroupBarsPerAxis" ) >>= m_bGroupBarsPerAxis;
}
m_bSupportingStartingAngle = ChartTypeHelper::isSupportingStartingAngle( xChartType );
if( m_bSupportingStartingAngle )
{
xDiagramProperties->getPropertyValue( "StartingAngle" ) >>= m_nStartingAngle;
}
m_aSupportedMissingValueTreatments = ChartTypeHelper::getSupportedMissingValueTreatments( xChartType );
m_nMissingValueTreatment = DiagramHelper::getCorrectedMissingValueTreatment(
ChartModelHelper::findDiagram(m_xChartModel), xChartType );
uno::Reference< XChartDocument > xChartDoc( m_xChartModel, uno::UNO_QUERY );
uno::Reference< beans::XPropertySet > xProp( xChartDoc->getDataProvider(), uno::UNO_QUERY );
if( xProp.is() )
{
try
{
//test whether the data provider offers this property
xProp->getPropertyValue( "IncludeHiddenCells" );
//if not exception is thrown the property is offered
m_bSupportingPlottingOfHiddenCells = true;
xDiagramProperties->getPropertyValue( "IncludeHiddenCells" ) >>= m_bIncludeHiddenCells;
}
catch( const beans::UnknownPropertyException& )
{
}
}
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
}
SeriesOptionsItemConverter::~SeriesOptionsItemConverter()
{
}
const sal_uInt16 * SeriesOptionsItemConverter::GetWhichPairs() const
{
// must span all used items!
return nSeriesOptionsWhichPairs;
}
bool SeriesOptionsItemConverter::GetItemProperty( tWhichIdType /*nWhichId*/, tPropertyNameWithMemberId & /*rOutProperty*/ ) const
{
return false;
}
bool SeriesOptionsItemConverter::ApplySpecialItem( sal_uInt16 nWhichId, const SfxItemSet & rItemSet )
{
bool bChanged = false;
switch( nWhichId )
{
case SCHATTR_AXIS:
{
sal_Int32 nItemValue = static_cast< const SfxInt32Item & >(
rItemSet.Get( nWhichId )).GetValue();
bool bAttachToMainAxis = nItemValue == CHART_AXIS_PRIMARY_Y;
if( bAttachToMainAxis != m_bAttachToMainAxis )
{
//change model:
bChanged = DiagramHelper::attachSeriesToAxis( bAttachToMainAxis, uno::Reference< XDataSeries >::query( GetPropertySet() )
, ChartModelHelper::findDiagram(m_xChartModel), m_xCC );
if( bChanged )
m_bAttachToMainAxis = bAttachToMainAxis;
}
}
break;
case SCHATTR_BAR_OVERLAP:
case SCHATTR_BAR_GAPWIDTH:
{
if( m_bSupportingOverlapAndGapWidthProperties )
{
sal_Int32& rBarPosition = ( nWhichId == SCHATTR_BAR_OVERLAP ) ? m_nBarOverlap : m_nGapWidth;
rBarPosition = static_cast< const SfxInt32Item & >( rItemSet.Get( nWhichId )).GetValue();
OUString aPropName("GapwidthSequence" );
if( nWhichId == SCHATTR_BAR_OVERLAP )
aPropName = "OverlapSequence";
uno::Reference< XDataSeries > xDataSeries( GetPropertySet(), uno::UNO_QUERY );
uno::Reference< XDiagram > xDiagram( ChartModelHelper::findDiagram(m_xChartModel) );
uno::Reference< beans::XPropertySet > xChartTypeProps( DiagramHelper::getChartTypeOfSeries( xDiagram , xDataSeries ), uno::UNO_QUERY );
if( xChartTypeProps.is() )
{
sal_Int32 nAxisIndex = DataSeriesHelper::getAttachedAxisIndex(xDataSeries);
uno::Sequence< sal_Int32 > aBarPositionSequence;
if( xChartTypeProps.is() )
{
if( xChartTypeProps->getPropertyValue( aPropName ) >>= aBarPositionSequence )
{
bool bGroupBarsPerAxis = rItemSet.Get( SCHATTR_GROUP_BARS_PER_AXIS ).GetValue();
if(!bGroupBarsPerAxis)
{
//set the same value for all axes
for( sal_Int32 nN = 0; nN < aBarPositionSequence.getLength(); nN++ )
aBarPositionSequence[nN] = rBarPosition;
}
else if( nAxisIndex >= 0 && nAxisIndex < aBarPositionSequence.getLength() )
aBarPositionSequence[nAxisIndex] = rBarPosition;
xChartTypeProps->setPropertyValue( aPropName, uno::Any(aBarPositionSequence) );
bChanged = true;
}
}
}
}
}
break;
case SCHATTR_BAR_CONNECT:
{
m_bConnectBars = static_cast< const SfxBoolItem & >(
rItemSet.Get( nWhichId )).GetValue();
if( m_bSupportingBarConnectors )
{
bool bOldConnectBars = false;
uno::Reference< beans::XPropertySet > xDiagramProperties( ChartModelHelper::findDiagram(m_xChartModel), uno::UNO_QUERY );
if( xDiagramProperties.is() &&
(xDiagramProperties->getPropertyValue( "ConnectBars" ) >>= bOldConnectBars) &&
bOldConnectBars != m_bConnectBars )
{
xDiagramProperties->setPropertyValue( "ConnectBars" , uno::Any(m_bConnectBars) );
bChanged = true;
}
}
}
break;
case SCHATTR_GROUP_BARS_PER_AXIS:
{
m_bGroupBarsPerAxis = static_cast< const SfxBoolItem & >(
rItemSet.Get( nWhichId )).GetValue();
if( m_bSupportingAxisSideBySide )
{
bool bOldGroupBarsPerAxis = true;
uno::Reference< beans::XPropertySet > xDiagramProperties( ChartModelHelper::findDiagram(m_xChartModel), uno::UNO_QUERY );
if( xDiagramProperties.is() &&
(xDiagramProperties->getPropertyValue( "GroupBarsPerAxis" ) >>= bOldGroupBarsPerAxis) &&
bOldGroupBarsPerAxis != m_bGroupBarsPerAxis )
{
xDiagramProperties->setPropertyValue( "GroupBarsPerAxis" , uno::Any(m_bGroupBarsPerAxis) );
bChanged = true;
}
}
}
break;
case SCHATTR_STARTING_ANGLE:
{
if( m_bSupportingStartingAngle )
{
m_nStartingAngle = static_cast< const SfxInt32Item & >( rItemSet.Get( nWhichId )).GetValue();
uno::Reference< beans::XPropertySet > xDiagramProperties( ChartModelHelper::findDiagram(m_xChartModel), uno::UNO_QUERY );
if( xDiagramProperties.is() )
{
xDiagramProperties->setPropertyValue( "StartingAngle" , uno::Any(m_nStartingAngle) );
bChanged = true;
}
}
}
break;
case SCHATTR_CLOCKWISE:
{
bool bClockwise = static_cast< const SfxBoolItem & >(
rItemSet.Get( nWhichId )).GetValue();
if( m_xCooSys.is() )
{
uno::Reference< chart2::XAxis > xAxis( AxisHelper::getAxis( 1, 0, m_xCooSys ) );
if( xAxis.is() )
{
chart2::ScaleData aScaleData( xAxis->getScaleData() );
aScaleData.Orientation = bClockwise ? chart2::AxisOrientation_REVERSE : chart2::AxisOrientation_MATHEMATICAL;
xAxis->setScaleData( aScaleData );
bChanged = true;
}
}
}
break;
case SCHATTR_MISSING_VALUE_TREATMENT:
{
if( m_aSupportedMissingValueTreatments.getLength() )
{
sal_Int32 nNew = static_cast< const SfxInt32Item & >( rItemSet.Get( nWhichId )).GetValue();
if( m_nMissingValueTreatment != nNew )
{
try
{
uno::Reference< beans::XPropertySet > xDiagramProperties( ChartModelHelper::findDiagram(m_xChartModel), uno::UNO_QUERY );
if( xDiagramProperties.is() )
{
xDiagramProperties->setPropertyValue( "MissingValueTreatment" , uno::Any( nNew ));
bChanged = true;
}
}
catch( const uno::Exception& e )
{
SAL_WARN("chart2", "Exception caught. " << e );
}
}
}
}
break;
case SCHATTR_INCLUDE_HIDDEN_CELLS:
{
if( m_bSupportingPlottingOfHiddenCells )
{
bool bIncludeHiddenCells = static_cast<const SfxBoolItem &>(rItemSet.Get(nWhichId)).GetValue();
if (bIncludeHiddenCells != m_bIncludeHiddenCells)
{
ChartModel* pModel = dynamic_cast<ChartModel*>(m_xChartModel.get());
if (pModel)
bChanged = ChartModelHelper::setIncludeHiddenCells( bIncludeHiddenCells, *pModel );
}
}
}
break;
}
return bChanged;
}
void SeriesOptionsItemConverter::FillSpecialItem(
sal_uInt16 nWhichId, SfxItemSet & rOutItemSet ) const
{
switch( nWhichId )
{
case SCHATTR_AXIS:
{
sal_Int32 nItemValue = m_bAttachToMainAxis ? CHART_AXIS_PRIMARY_Y : CHART_AXIS_SECONDARY_Y;
rOutItemSet.Put( SfxInt32Item(nWhichId,nItemValue ) );
break;
}
case SCHATTR_BAR_OVERLAP:
{
if( m_bSupportingOverlapAndGapWidthProperties )
rOutItemSet.Put( SfxInt32Item(nWhichId,m_nBarOverlap) );
break;
}
case SCHATTR_BAR_GAPWIDTH:
{
if( m_bSupportingOverlapAndGapWidthProperties )
rOutItemSet.Put( SfxInt32Item(nWhichId,m_nGapWidth) );
break;
}
case SCHATTR_BAR_CONNECT:
{
if( m_bSupportingBarConnectors )
rOutItemSet.Put( SfxBoolItem(nWhichId,m_bConnectBars));
break;
}
case SCHATTR_GROUP_BARS_PER_AXIS:
{
if( m_bSupportingAxisSideBySide )
rOutItemSet.Put( SfxBoolItem(nWhichId,m_bGroupBarsPerAxis) );
break;
}
case SCHATTR_AXIS_FOR_ALL_SERIES:
{
if( m_nAllSeriesAxisIndex != - 1)
rOutItemSet.Put( SfxInt32Item(nWhichId, m_nAllSeriesAxisIndex));
break;
}
case SCHATTR_STARTING_ANGLE:
{
if( m_bSupportingStartingAngle )
rOutItemSet.Put( SfxInt32Item(nWhichId,m_nStartingAngle));
break;
}
case SCHATTR_CLOCKWISE:
{
rOutItemSet.Put( SfxBoolItem(nWhichId,m_bClockwise) );
break;
}
case SCHATTR_MISSING_VALUE_TREATMENT:
{
if( m_aSupportedMissingValueTreatments.getLength() )
rOutItemSet.Put( SfxInt32Item( nWhichId, m_nMissingValueTreatment ));
break;
}
case SCHATTR_AVAILABLE_MISSING_VALUE_TREATMENTS:
{
rOutItemSet.Put( SfxIntegerListItem( nWhichId, m_aSupportedMissingValueTreatments ) );
break;
}
case SCHATTR_INCLUDE_HIDDEN_CELLS:
{
if( m_bSupportingPlottingOfHiddenCells )
rOutItemSet.Put( SfxBoolItem(nWhichId, m_bIncludeHiddenCells) );
break;
}
default:
break;
}
}
} // namespace wrapper
} // namespace chart
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V1019 Compound assignment expression is used inside condition.
↑ V1019 Compound assignment expression is used inside condition.