/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <stdlib.h>
#include <document.hxx>
#include <scerrors.hxx>
#include <fprogressbar.hxx>
#include <globstr.hrc>
#include <xltracer.hxx>
#include <xltable.hxx>
#include <xihelper.hxx>
#include <xipage.hxx>
#include <xiview.hxx>
#include <xilink.hxx>
#include <xiname.hxx>
#include <xicontent.hxx>
#include <xiescher.hxx>
#include <xipivot.hxx>
#include <xistyle.hxx>
#include <XclImpChangeTrack.hxx>
#include <documentimport.hxx>
#include <root.hxx>
#include <imp_op.hxx>
#include <excimp8.hxx>
#include <memory>
namespace
{
bool TryStartNextRecord(XclImpStream& rIn, std::size_t nProgressBasePos)
{
bool bValid = true;
// i#115255 fdo#40304 BOUNDSHEET doesn't point to a valid
// BOF record position. Scan the records manually (from
// the BOUNDSHEET position) until we find a BOF. Some 3rd
// party Russian programs generate invalid xls docs with
// this kind of silliness.
if (rIn.PeekRecId(nProgressBasePos) == EXC_ID5_BOF)
// BOUNDSHEET points to a valid BOF record. Good.
rIn.StartNextRecord(nProgressBasePos);
else
{
while (bValid && rIn.GetRecId() != EXC_ID5_BOF)
bValid = rIn.StartNextRecord();
}
return bValid;
}
}
ErrCode ImportExcel::Read()
{
XclImpPageSettings& rPageSett = GetPageSettings();
XclImpTabViewSettings& rTabViewSett = GetTabViewSettings();
XclImpPalette& rPal = GetPalette();
XclImpFontBuffer& rFontBfr = GetFontBuffer();
XclImpNumFmtBuffer& rNumFmtBfr = GetNumFmtBuffer();
XclImpXFBuffer& rXFBfr = GetXFBuffer();
XclImpNameManager& rNameMgr = GetNameManager();
// call to GetCurrSheetDrawing() cannot be cached (changes in new sheets)
enum STATE {
Z_BiffNull, // not a valid Biff-Format
Z_Biff2, // Biff2: only one table
Z_Biff3, // Biff3: only one table
Z_Biff4, // Biff4: only one table
Z_Biff4W, // Biff4 Workbook: Globals
Z_Biff4T, // Biff4 Workbook: a table itself
Z_Biff4E, // Biff4 Workbook: between tables
Z_Biff5WPre,// Biff5: Prefetch Workbook
Z_Biff5W, // Biff5: Globals
Z_Biff5TPre,// Biff5: Prefetch for Shrfmla/Array Formula
Z_Biff5T, // Biff5: a table itself
Z_Biff5E, // Biff5: between tables
Z_Biffn0, // all Biffs: skip table till next EOF
Z_End };
STATE eCurrent = Z_BiffNull, ePrev = Z_BiffNull;
ErrCode eLastErr = ERRCODE_NONE;
sal_uInt16 nOpcode;
sal_uInt16 nBofLevel = 0;
std::unique_ptr< ScfSimpleProgressBar > pProgress( new ScfSimpleProgressBar(
aIn.GetSvStreamSize(), GetDocShell(), STR_LOAD_DOC ) );
/* #i104057# Need to track a base position for progress bar calculation,
because sheet substreams may not be in order of sheets. */
std::size_t nProgressBasePos = 0;
std::size_t nProgressBaseSize = 0;
for (; eCurrent != Z_End; mnLastRecId = nOpcode)
{
if( eCurrent == Z_Biff5E )
{
sal_uInt16 nScTab = GetCurrScTab();
if( nScTab < maSheetOffsets.size() )
{
nProgressBaseSize += (aIn.GetSvStreamPos() - nProgressBasePos);
nProgressBasePos = maSheetOffsets[ nScTab ];
bool bValid = TryStartNextRecord(aIn, nProgressBasePos);
if (!bValid)
{
// Safeguard ourselves from potential infinite loop.
eCurrent = Z_End;
}
}
else
eCurrent = Z_End;
}
else
aIn.StartNextRecord();
nOpcode = aIn.GetRecId();
if( !aIn.IsValid() )
{
// finalize table if EOF is missing
switch( eCurrent )
{
case Z_Biff2:
case Z_Biff3:
case Z_Biff4:
case Z_Biff4T:
case Z_Biff5TPre:
case Z_Biff5T:
rNumFmtBfr.CreateScFormats();
Eof();
break;
default:;
}
break;
}
if( eCurrent == Z_End )
break;
if( eCurrent != Z_Biff5TPre && eCurrent != Z_Biff5WPre )
pProgress->ProgressAbs( nProgressBaseSize + aIn.GetSvStreamPos() - nProgressBasePos );
switch( eCurrent )
{
case Z_BiffNull: // ------------------------------- Z_BiffNull -
{
switch( nOpcode )
{
case EXC_ID2_BOF:
case EXC_ID3_BOF:
case EXC_ID4_BOF:
case EXC_ID5_BOF:
{
// #i23425# don't rely on the record ID, but on the detected BIFF version
switch( GetBiff() )
{
case EXC_BIFF2:
Bof2();
if( pExcRoot->eDateiTyp == Biff2 )
{
eCurrent = Z_Biff2;
NewTable();
}
break;
case EXC_BIFF3:
Bof3();
if( pExcRoot->eDateiTyp == Biff3 )
{
eCurrent = Z_Biff3;
NewTable();
}
break;
case EXC_BIFF4:
Bof4();
if( pExcRoot->eDateiTyp == Biff4 )
{
eCurrent = Z_Biff4;
NewTable();
}
else if( pExcRoot->eDateiTyp == Biff4W )
eCurrent = Z_Biff4W;
break;
case EXC_BIFF5:
Bof5();
if( pExcRoot->eDateiTyp == Biff5W )
{
eCurrent = Z_Biff5WPre;
nBdshtTab = 0;
aIn.StoreGlobalPosition(); // store position
}
else if( pExcRoot->eDateiTyp == Biff5 )
{
// #i62752# possible to have BIFF5 sheet without globals
NewTable();
eCurrent = Z_Biff5TPre; // Shrfmla Prefetch, Row-Prefetch
nBofLevel = 0;
aIn.StoreGlobalPosition(); // store position
}
break;
default:
DBG_ERROR_BIFF();
}
}
break;
}
}
break;
case Z_Biff2: // ---------------------------------- Z_Biff2 -
{
switch( nOpcode )
{
case EXC_ID2_DIMENSIONS:
case EXC_ID3_DIMENSIONS: ReadDimensions(); break;
case EXC_ID2_BLANK:
case EXC_ID3_BLANK: ReadBlank(); break;
case EXC_ID2_INTEGER: ReadInteger(); break;
case EXC_ID2_NUMBER:
case EXC_ID3_NUMBER: ReadNumber(); break;
case EXC_ID2_LABEL:
case EXC_ID3_LABEL: ReadLabel(); break;
case EXC_ID2_BOOLERR:
case EXC_ID3_BOOLERR: ReadBoolErr(); break;
case EXC_ID_RK: ReadRk(); break;
case 0x06: Formula25(); break; // FORMULA [ 2 5]
case 0x08: Row25(); break; // ROW [ 2 5]
case 0x0A: // EOF [ 2345]
rNumFmtBfr.CreateScFormats();
rNameMgr.ConvertAllTokens();
Eof();
eCurrent = Z_End;
break;
case 0x14:
case 0x15: rPageSett.ReadHeaderFooter( maStrm ); break;
case 0x17: Externsheet(); break; // EXTERNSHEET [ 2345]
case 0x18: rNameMgr.ReadName( maStrm ); break;
case 0x1C: GetCurrSheetDrawing().ReadNote( maStrm );break;
case 0x1D: rTabViewSett.ReadSelection( maStrm ); break;
case 0x1E: rNumFmtBfr.ReadFormat( maStrm ); break;
case 0x20: Columndefault(); break; // COLUMNDEFAULT[ 2 ]
case 0x21: Array25(); break; // ARRAY [ 2 5]
case 0x23: Externname25(); break; // EXTERNNAME [ 2 5]
case 0x24: Colwidth(); break; // COLWIDTH [ 2 ]
case 0x25: Defrowheight2(); break; // DEFAULTROWHEI[ 2 ]
case 0x26:
case 0x27:
case 0x28:
case 0x29: rPageSett.ReadMargin( maStrm ); break;
case 0x2A: rPageSett.ReadPrintHeaders( maStrm ); break;
case 0x2B: rPageSett.ReadPrintGridLines( maStrm ); break;
case 0x2F: // FILEPASS [ 2345]
eLastErr = XclImpDecryptHelper::ReadFilepass( maStrm );
if( eLastErr != ERRCODE_NONE )
eCurrent = Z_End;
break;
case EXC_ID2_FONT: rFontBfr.ReadFont( maStrm ); break;
case EXC_ID_EFONT: rFontBfr.ReadEfont( maStrm ); break;
case 0x3E: rTabViewSett.ReadWindow2( maStrm, false );break;
case 0x41: rTabViewSett.ReadPane( maStrm ); break;
case 0x42: Codepage(); break; // CODEPAGE [ 2345]
case 0x43: rXFBfr.ReadXF( maStrm ); break;
case 0x44: Ixfe(); break; // IXFE [ 2 ]
}
}
break;
case Z_Biff3: // ---------------------------------- Z_Biff3 -
{
switch( nOpcode )
{
// skip chart substream
case EXC_ID2_BOF:
case EXC_ID3_BOF:
case EXC_ID4_BOF:
case EXC_ID5_BOF: XclTools::SkipSubStream( maStrm ); break;
case EXC_ID2_DIMENSIONS:
case EXC_ID3_DIMENSIONS: ReadDimensions(); break;
case EXC_ID2_BLANK:
case EXC_ID3_BLANK: ReadBlank(); break;
case EXC_ID2_INTEGER: ReadInteger(); break;
case EXC_ID2_NUMBER:
case EXC_ID3_NUMBER: ReadNumber(); break;
case EXC_ID2_LABEL:
case EXC_ID3_LABEL: ReadLabel(); break;
case EXC_ID2_BOOLERR:
case EXC_ID3_BOOLERR: ReadBoolErr(); break;
case EXC_ID_RK: ReadRk(); break;
case 0x0A: // EOF [ 2345]
rNumFmtBfr.CreateScFormats();
rNameMgr.ConvertAllTokens();
Eof();
eCurrent = Z_End;
break;
case 0x14:
case 0x15: rPageSett.ReadHeaderFooter( maStrm ); break;
case 0x17: Externsheet(); break; // EXTERNSHEET [ 2345]
case 0x1A:
case 0x1B: rPageSett.ReadPageBreaks( maStrm ); break;
case 0x1C: GetCurrSheetDrawing().ReadNote( maStrm );break;
case 0x1D: rTabViewSett.ReadSelection( maStrm ); break;
case 0x1E: rNumFmtBfr.ReadFormat( maStrm ); break;
case 0x22: Rec1904(); break; // 1904 [ 2345]
case 0x26:
case 0x27:
case 0x28:
case 0x29: rPageSett.ReadMargin( maStrm ); break;
case 0x2A: rPageSett.ReadPrintHeaders( maStrm ); break;
case 0x2B: rPageSett.ReadPrintGridLines( maStrm ); break;
case 0x2F: // FILEPASS [ 2345]
eLastErr = XclImpDecryptHelper::ReadFilepass( maStrm );
if( eLastErr != ERRCODE_NONE )
eCurrent = Z_End;
break;
case EXC_ID_FILESHARING: ReadFileSharing(); break;
case 0x41: rTabViewSett.ReadPane( maStrm ); break;
case 0x42: Codepage(); break; // CODEPAGE [ 2345]
case 0x56: break; // BUILTINFMTCNT[ 34 ]
case 0x5D: GetCurrSheetDrawing().ReadObj( maStrm );break;
case 0x7D: Colinfo(); break; // COLINFO [ 345]
case 0x8C: Country(); break; // COUNTRY [ 345]
case 0x92: rPal.ReadPalette( maStrm ); break;
case 0x0206: Formula3(); break; // FORMULA [ 3 ]
case 0x0208: Row34(); break; // ROW [ 34 ]
case 0x0218: rNameMgr.ReadName( maStrm ); break;
case 0x0221: Array34(); break; // ARRAY [ 34 ]
case 0x0223: break; // EXTERNNAME [ 34 ]
case 0x0225: Defrowheight345();break;//DEFAULTROWHEI[ 345]
case 0x0231: rFontBfr.ReadFont( maStrm ); break;
case 0x023E: rTabViewSett.ReadWindow2( maStrm, false );break;
case 0x0243: rXFBfr.ReadXF( maStrm ); break;
case 0x0293: rXFBfr.ReadStyle( maStrm ); break;
}
}
break;
case Z_Biff4: // ---------------------------------- Z_Biff4 -
{
switch( nOpcode )
{
// skip chart substream
case EXC_ID2_BOF:
case EXC_ID3_BOF:
case EXC_ID4_BOF:
case EXC_ID5_BOF: XclTools::SkipSubStream( maStrm ); break;
case EXC_ID2_DIMENSIONS:
case EXC_ID3_DIMENSIONS: ReadDimensions(); break;
case EXC_ID2_BLANK:
case EXC_ID3_BLANK: ReadBlank(); break;
case EXC_ID2_INTEGER: ReadInteger(); break;
case EXC_ID2_NUMBER:
case EXC_ID3_NUMBER: ReadNumber(); break;
case EXC_ID2_LABEL:
case EXC_ID3_LABEL: ReadLabel(); break;
case EXC_ID2_BOOLERR:
case EXC_ID3_BOOLERR: ReadBoolErr(); break;
case EXC_ID_RK: ReadRk(); break;
case 0x0A: // EOF [ 2345]
rNumFmtBfr.CreateScFormats();
rNameMgr.ConvertAllTokens();
Eof();
eCurrent = Z_End;
break;
case 0x12: SheetProtect(); break; // SHEET PROTECTION
case 0x14:
case 0x15: rPageSett.ReadHeaderFooter( maStrm ); break;
case 0x17: Externsheet(); break; // EXTERNSHEET [ 2345]
case 0x1A:
case 0x1B: rPageSett.ReadPageBreaks( maStrm ); break;
case 0x1C: GetCurrSheetDrawing().ReadNote( maStrm );break;
case 0x1D: rTabViewSett.ReadSelection( maStrm ); break;
case 0x22: Rec1904(); break; // 1904 [ 2345]
case 0x26:
case 0x27:
case 0x28:
case 0x29: rPageSett.ReadMargin( maStrm ); break;
case 0x2A: rPageSett.ReadPrintHeaders( maStrm ); break;
case 0x2B: rPageSett.ReadPrintGridLines( maStrm ); break;
case 0x2F: // FILEPASS [ 2345]
eLastErr = XclImpDecryptHelper::ReadFilepass( maStrm );
if( eLastErr != ERRCODE_NONE )
eCurrent = Z_End;
break;
case EXC_ID_FILESHARING: ReadFileSharing(); break;
case 0x41: rTabViewSett.ReadPane( maStrm ); break;
case 0x42: Codepage(); break; // CODEPAGE [ 2345]
case 0x55: DefColWidth(); break;
case 0x56: break; // BUILTINFMTCNT[ 34 ]
case 0x5D: GetCurrSheetDrawing().ReadObj( maStrm );break;
case 0x7D: Colinfo(); break; // COLINFO [ 345]
case 0x8C: Country(); break; // COUNTRY [ 345]
case 0x92: rPal.ReadPalette( maStrm ); break;
case 0x99: Standardwidth(); break; // STANDARDWIDTH[ 45]
case 0xA1: rPageSett.ReadSetup( maStrm ); break;
case 0x0208: Row34(); break; // ROW [ 34 ]
case 0x0218: rNameMgr.ReadName( maStrm ); break;
case 0x0221: Array34(); break; // ARRAY [ 34 ]
case 0x0223: break; // EXTERNNAME [ 34 ]
case 0x0225: Defrowheight345();break;//DEFAULTROWHEI[ 345]
case 0x0231: rFontBfr.ReadFont( maStrm ); break;
case 0x023E: rTabViewSett.ReadWindow2( maStrm, false );break;
case 0x0406: Formula4(); break; // FORMULA [ 4 ]
case 0x041E: rNumFmtBfr.ReadFormat( maStrm ); break;
case 0x0443: rXFBfr.ReadXF( maStrm ); break;
case 0x0293: rXFBfr.ReadStyle( maStrm ); break;
}
}
break;
case Z_Biff4W: // --------------------------------- Z_Biff4W -
{
switch( nOpcode )
{
case 0x0A: // EOF [ 2345]
rNameMgr.ConvertAllTokens();
eCurrent = Z_End;
break;
case 0x12: DocProtect(); break; // PROTECT [ 5]
case 0x2F: // FILEPASS [ 2345]
eLastErr = XclImpDecryptHelper::ReadFilepass( maStrm );
if( eLastErr != ERRCODE_NONE )
eCurrent = Z_End;
break;
case EXC_ID_FILESHARING: ReadFileSharing(); break;
case 0x17: Externsheet(); break; // EXTERNSHEET [ 2345]
case 0x42: Codepage(); break; // CODEPAGE [ 2345]
case 0x55: DefColWidth(); break;
case 0x56: break; // BUILTINFMTCNT[ 34 ]
case 0x8C: Country(); break; // COUNTRY [ 345]
case 0x8F: break; // BUNDLEHEADER [ 4 ]
case 0x92: rPal.ReadPalette( maStrm ); break;
case 0x99: Standardwidth(); break; // STANDARDWIDTH[ 45]
case 0x0218: rNameMgr.ReadName( maStrm ); break;
case 0x0223: break; // EXTERNNAME [ 34 ]
case 0x0225: Defrowheight345();break;//DEFAULTROWHEI[ 345]
case 0x0231: rFontBfr.ReadFont( maStrm ); break;
case EXC_ID4_BOF: // BOF [ 4 ]
Bof4();
if( pExcRoot->eDateiTyp == Biff4 )
{
eCurrent = Z_Biff4T;
NewTable();
}
else
eCurrent = Z_End;
break;
case 0x041E: rNumFmtBfr.ReadFormat( maStrm ); break;
case 0x0443: rXFBfr.ReadXF( maStrm ); break;
case 0x0293: rXFBfr.ReadStyle( maStrm ); break;
}
}
break;
case Z_Biff4T: // --------------------------------- Z_Biff4T -
{
switch( nOpcode )
{
// skip chart substream
case EXC_ID2_BOF:
case EXC_ID3_BOF:
case EXC_ID4_BOF:
case EXC_ID5_BOF: XclTools::SkipSubStream( maStrm ); break;
case EXC_ID2_DIMENSIONS:
case EXC_ID3_DIMENSIONS: ReadDimensions(); break;
case EXC_ID2_BLANK:
case EXC_ID3_BLANK: ReadBlank(); break;
case EXC_ID2_INTEGER: ReadInteger(); break;
case EXC_ID2_NUMBER:
case EXC_ID3_NUMBER: ReadNumber(); break;
case EXC_ID2_LABEL:
case EXC_ID3_LABEL: ReadLabel(); break;
case EXC_ID2_BOOLERR:
case EXC_ID3_BOOLERR: ReadBoolErr(); break;
case EXC_ID_RK: ReadRk(); break;
case 0x0A: // EOF [ 2345]
rNameMgr.ConvertAllTokens();
Eof();
eCurrent = Z_Biff4E;
break;
case 0x12: SheetProtect(); break; // SHEET PROTECTION
case 0x14:
case 0x15: rPageSett.ReadHeaderFooter( maStrm ); break;
case 0x1A:
case 0x1B: rPageSett.ReadPageBreaks( maStrm ); break;
case 0x1C: GetCurrSheetDrawing().ReadNote( maStrm );break;
case 0x1D: rTabViewSett.ReadSelection( maStrm ); break;
case 0x2F: // FILEPASS [ 2345]
eLastErr = XclImpDecryptHelper::ReadFilepass( maStrm );
if( eLastErr != ERRCODE_NONE )
eCurrent = Z_End;
break;
case 0x41: rTabViewSett.ReadPane( maStrm ); break;
case 0x42: Codepage(); break; // CODEPAGE [ 2345]
case 0x55: DefColWidth(); break;
case 0x56: break; // BUILTINFMTCNT[ 34 ]
case 0x5D: GetCurrSheetDrawing().ReadObj( maStrm );break;
case 0x7D: Colinfo(); break; // COLINFO [ 345]
case 0x8C: Country(); break; // COUNTRY [ 345]
case 0x8F: break; // BUNDLEHEADER [ 4 ]
case 0x92: rPal.ReadPalette( maStrm ); break;
case 0x99: Standardwidth(); break; // STANDARDWIDTH[ 45]
case 0xA1: rPageSett.ReadSetup( maStrm ); break;
case 0x0208: Row34(); break; // ROW [ 34 ]
case 0x0218: rNameMgr.ReadName( maStrm ); break;
case 0x0221: Array34(); break;
case 0x0225: Defrowheight345();break;//DEFAULTROWHEI[ 345]
case 0x0231: rFontBfr.ReadFont( maStrm ); break;
case 0x023E: rTabViewSett.ReadWindow2( maStrm, false );break;
case 0x0406: Formula4(); break;
case 0x041E: rNumFmtBfr.ReadFormat( maStrm ); break;
case 0x0443: rXFBfr.ReadXF( maStrm ); break;
case 0x0293: rXFBfr.ReadStyle( maStrm ); break;
}
}
break;
case Z_Biff4E: // --------------------------------- Z_Biff4E -
{
switch( nOpcode )
{
case 0x0A: // EOF [ 2345]
eCurrent = Z_End;
break;
case 0x8F: break; // BUNDLEHEADER [ 4 ]
case EXC_ID4_BOF: // BOF [ 4 ]
Bof4();
NewTable();
if( pExcRoot->eDateiTyp == Biff4 )
{
eCurrent = Z_Biff4T;
}
else
{
ePrev = eCurrent;
eCurrent = Z_Biffn0;
}
break;
}
}
break;
case Z_Biff5WPre: // ------------------------------ Z_Biff5WPre -
{
switch( nOpcode )
{
case 0x0A: // EOF [ 2345]
eCurrent = Z_Biff5W;
aIn.SeekGlobalPosition(); // and back to old position
break;
case 0x12: DocProtect(); break; // PROTECT [ 5]
case 0x2F: // FILEPASS [ 2345]
eLastErr = XclImpDecryptHelper::ReadFilepass( maStrm );
if( eLastErr != ERRCODE_NONE )
eCurrent = Z_End;
break;
case EXC_ID_FILESHARING: ReadFileSharing(); break;
case 0x3D: Window1(); break;
case 0x42: Codepage(); break; // CODEPAGE [ 2345]
case 0x85: Boundsheet(); break; // BOUNDSHEET [ 5]
case 0x8C: Country(); break; // COUNTRY [ 345]
// PALETTE follows XFs, but already needed while reading the XFs
case 0x92: rPal.ReadPalette( maStrm ); break;
}
}
break;
case Z_Biff5W: // --------------------------------- Z_Biff5W -
{
switch( nOpcode )
{
case 0x0A: // EOF [ 2345]
rNumFmtBfr.CreateScFormats();
rXFBfr.CreateUserStyles();
rNameMgr.ConvertAllTokens();
eCurrent = Z_Biff5E;
break;
case 0x18: rNameMgr.ReadName( maStrm ); break;
case 0x1E: rNumFmtBfr.ReadFormat( maStrm ); break;
case 0x22: Rec1904(); break; // 1904 [ 2345]
case 0x31: rFontBfr.ReadFont( maStrm ); break;
case 0x56: break; // BUILTINFMTCNT[ 34 ]
case 0x8D: Hideobj(); break; // HIDEOBJ [ 345]
case 0xDE: Olesize(); break;
case 0xE0: rXFBfr.ReadXF( maStrm ); break;
case 0x0293: rXFBfr.ReadStyle( maStrm ); break;
case 0x041E: rNumFmtBfr.ReadFormat( maStrm ); break;
}
}
break;
case Z_Biff5TPre: // ------------------------------- Z_Biff5Pre -
{
if (nOpcode == EXC_ID5_BOF)
nBofLevel++;
else if( (nOpcode == 0x000A) && nBofLevel )
nBofLevel--;
else if( !nBofLevel ) // don't read chart records
{
switch( nOpcode )
{
case EXC_ID2_DIMENSIONS:
case EXC_ID3_DIMENSIONS: ReadDimensions(); break;
case 0x08: Row25(); break; // ROW [ 2 5]
case 0x0A: // EOF [ 2345]
eCurrent = Z_Biff5T;
aIn.SeekGlobalPosition(); // and back to old position
break;
case 0x12: SheetProtect(); break; // SHEET PROTECTION
case 0x1A:
case 0x1B: rPageSett.ReadPageBreaks( maStrm ); break;
case 0x1D: rTabViewSett.ReadSelection( maStrm ); break;
case 0x17: Externsheet(); break; // EXTERNSHEET [ 2345]
case 0x21: Array25(); break; // ARRAY [ 2 5]
case 0x23: Externname25(); break; // EXTERNNAME [ 2 5]
case 0x41: rTabViewSett.ReadPane( maStrm ); break;
case 0x42: Codepage(); break; // CODEPAGE [ 2345]
case 0x55: DefColWidth(); break;
case 0x7D: Colinfo(); break; // COLINFO [ 345]
case 0x81: Wsbool(); break; // WSBOOL [ 2345]
case 0x8C: Country(); break; // COUNTRY [ 345]
case 0x99: Standardwidth(); break; // STANDARDWIDTH[ 45]
case 0x0208: Row34(); break; // ROW [ 34 ]
case 0x0221: Array34(); break; // ARRAY [ 34 ]
case 0x0223: break; // EXTERNNAME [ 34 ]
case 0x0225: Defrowheight345();break;//DEFAULTROWHEI[ 345]
case 0x023E: rTabViewSett.ReadWindow2( maStrm, false );break;
}
}
}
break;
case Z_Biff5T: // --------------------------------- Z_Biff5T -
{
switch( nOpcode )
{
case EXC_ID2_BLANK:
case EXC_ID3_BLANK: ReadBlank(); break;
case EXC_ID2_INTEGER: ReadInteger(); break;
case EXC_ID2_NUMBER:
case EXC_ID3_NUMBER: ReadNumber(); break;
case EXC_ID2_LABEL:
case EXC_ID3_LABEL: ReadLabel(); break;
case EXC_ID2_BOOLERR:
case EXC_ID3_BOOLERR: ReadBoolErr(); break;
case EXC_ID_RK: ReadRk(); break;
case EXC_ID2_FORMULA:
case EXC_ID3_FORMULA:
case EXC_ID4_FORMULA: Formula25(); break;
case EXC_ID_SHRFMLA: Shrfmla(); break;
case 0x0A: Eof(); eCurrent = Z_Biff5E; break;
case 0x14:
case 0x15: rPageSett.ReadHeaderFooter( maStrm ); break;
case 0x17: Externsheet(); break; // EXTERNSHEET [ 2345]
case 0x1C: GetCurrSheetDrawing().ReadNote( maStrm );break;
case 0x1D: rTabViewSett.ReadSelection( maStrm ); break;
case 0x23: Externname25(); break; // EXTERNNAME [ 2 5]
case 0x26:
case 0x27:
case 0x28:
case 0x29: rPageSett.ReadMargin( maStrm ); break;
case 0x2A: rPageSett.ReadPrintHeaders( maStrm ); break;
case 0x2B: rPageSett.ReadPrintGridLines( maStrm ); break;
case 0x2F: // FILEPASS [ 2345]
eLastErr = XclImpDecryptHelper::ReadFilepass( maStrm );
if( eLastErr != ERRCODE_NONE )
eCurrent = Z_End;
break;
case 0x5D: GetCurrSheetDrawing().ReadObj( maStrm );break;
case 0x83:
case 0x84: rPageSett.ReadCenter( maStrm ); break;
case 0xA0: rTabViewSett.ReadScl( maStrm ); break;
case 0xA1: rPageSett.ReadSetup( maStrm ); break;
case 0xBD: Mulrk(); break; // MULRK [ 5]
case 0xBE: Mulblank(); break; // MULBLANK [ 5]
case 0xD6: Rstring(); break; // RSTRING [ 5]
case 0x00E5: Cellmerging(); break; // #i62300#
case 0x0236: TableOp(); break; // TABLE [ 5]
case EXC_ID5_BOF: // BOF [ 5]
XclTools::SkipSubStream( maStrm );
break;
}
}
break;
case Z_Biff5E: // --------------------------------- Z_Biff5E -
{
switch( nOpcode )
{
case EXC_ID5_BOF: // BOF [ 5]
Bof5();
NewTable();
switch( pExcRoot->eDateiTyp )
{
case Biff5:
case Biff5M4:
eCurrent = Z_Biff5TPre; // Shrfmla Prefetch, Row-Prefetch
nBofLevel = 0;
aIn.StoreGlobalPosition(); // store position
break;
case Biff5C: // chart sheet
GetCurrSheetDrawing().ReadTabChart( maStrm );
Eof();
GetTracer().TraceChartOnlySheet();
break;
case Biff5V:
default:
pD->SetVisible( GetCurrScTab(), false );
ePrev = eCurrent;
eCurrent = Z_Biffn0;
}
OSL_ENSURE( pExcRoot->eDateiTyp != Biff5W,
"+ImportExcel::Read(): Doppel-Whopper-Workbook!" );
break;
}
}
break;
case Z_Biffn0: // --------------------------------- Z_Biffn0 -
{
switch( nOpcode )
{
case 0x0A: // EOF [ 2345]
eCurrent = ePrev;
IncCurrScTab();
break;
}
}
break;
case Z_End: // ----------------------------------- Z_End -
OSL_FAIL( "*ImportExcel::Read(): Not possible state!" );
break;
default: OSL_FAIL( "-ImportExcel::Read(): state forgotten!" );
}
}
if( eLastErr == ERRCODE_NONE )
{
pProgress.reset();
GetDocImport().finalize();
AdjustRowHeight();
PostDocLoad();
pD->CalcAfterLoad(false);
const XclImpAddressConverter& rAddrConv = GetAddressConverter();
if( rAddrConv.IsTabTruncated() )
eLastErr = SCWARN_IMPORT_SHEET_OVERFLOW;
else if( bTabTruncated || rAddrConv.IsRowTruncated() )
eLastErr = SCWARN_IMPORT_ROW_OVERFLOW;
else if( rAddrConv.IsColTruncated() )
eLastErr = SCWARN_IMPORT_COLUMN_OVERFLOW;
}
return eLastErr;
}
ErrCode ImportExcel8::Read()
{
#ifdef EXC_INCL_DUMPER
{
Biff8RecDumper aDumper( GetRoot(), sal_True );
if( aDumper.Dump( aIn ) )
return ERRCODE_ABORT;
}
#endif
// read the entire BIFF8 stream
// don't look too close - this stuff seriously needs to be reworked
XclImpPageSettings& rPageSett = GetPageSettings();
XclImpTabViewSettings& rTabViewSett = GetTabViewSettings();
XclImpPalette& rPal = GetPalette();
XclImpFontBuffer& rFontBfr = GetFontBuffer();
XclImpNumFmtBuffer& rNumFmtBfr = GetNumFmtBuffer();
XclImpXFBuffer& rXFBfr = GetXFBuffer();
XclImpSst& rSst = GetSst();
XclImpTabInfo& rTabInfo = GetTabInfo();
XclImpNameManager& rNameMgr = GetNameManager();
XclImpLinkManager& rLinkMgr = GetLinkManager();
XclImpObjectManager& rObjMgr = GetObjectManager();
// call to GetCurrSheetDrawing() cannot be cached (changes in new sheets)
XclImpCondFormatManager& rCondFmtMgr = GetCondFormatManager();
XclImpValidationManager& rValidMgr = GetValidationManager();
XclImpPivotTableManager& rPTableMgr = GetPivotTableManager();
XclImpWebQueryBuffer& rWQBfr = GetWebQueryBuffer();
bool bInUserView = false; // true = In USERSVIEW(BEGIN|END) record block.
enum XclImpReadState
{
EXC_STATE_BEFORE_GLOBALS, /// Before workbook globals (wait for initial BOF).
EXC_STATE_GLOBALS_PRE, /// Prefetch for workbook globals.
EXC_STATE_GLOBALS, /// Workbook globals.
EXC_STATE_BEFORE_SHEET, /// Before worksheet (wait for new worksheet BOF).
EXC_STATE_SHEET_PRE, /// Prefetch for worksheet.
EXC_STATE_SHEET, /// Worksheet.
EXC_STATE_END /// Stop reading.
};
XclImpReadState eCurrent = EXC_STATE_BEFORE_GLOBALS;
ErrCode eLastErr = ERRCODE_NONE;
std::unique_ptr< ScfSimpleProgressBar > pProgress( new ScfSimpleProgressBar(
aIn.GetSvStreamSize(), GetDocShell(), STR_LOAD_DOC ) );
/* #i104057# Need to track a base position for progress bar calculation,
because sheet substreams may not be in order of sheets. */
std::size_t nProgressBasePos = 0;
std::size_t nProgressBaseSize = 0;
bool bSheetHasCodeName = false;
std::vector<OUString> aCodeNames;
std::vector < SCTAB > nTabsWithNoCodeName;
sal_uInt16 nRecId = 0;
for (; eCurrent != EXC_STATE_END; mnLastRecId = nRecId)
{
if( eCurrent == EXC_STATE_BEFORE_SHEET )
{
sal_uInt16 nScTab = GetCurrScTab();
if( nScTab < maSheetOffsets.size() )
{
nProgressBaseSize += (maStrm.GetSvStreamPos() - nProgressBasePos);
nProgressBasePos = maSheetOffsets[ nScTab ];
bool bValid = TryStartNextRecord(aIn, nProgressBasePos);
if (!bValid)
{
// Safeguard ourselves from potential infinite loop.
eCurrent = EXC_STATE_END;
}
// import only 256 sheets
if( nScTab > GetScMaxPos().Tab() )
{
if( maStrm.GetRecId() != EXC_ID_EOF )
XclTools::SkipSubStream( maStrm );
// #i29930# show warning box
GetAddressConverter().CheckScTab( nScTab );
eCurrent = EXC_STATE_END;
}
else
{
// #i109800# SHEET record may point to any record inside the
// sheet substream
bool bIsBof = maStrm.GetRecId() == EXC_ID5_BOF;
if( bIsBof )
Bof5(); // read the BOF record
else
pExcRoot->eDateiTyp = Biff8; // on missing BOF, assume a standard worksheet
NewTable();
switch( pExcRoot->eDateiTyp )
{
case Biff8: // worksheet
case Biff8M4: // macro sheet
eCurrent = EXC_STATE_SHEET_PRE; // Shrfmla Prefetch, Row-Prefetch
// go to next record
if( bIsBof ) maStrm.StartNextRecord();
maStrm.StoreGlobalPosition();
break;
case Biff8C: // chart sheet
GetCurrSheetDrawing().ReadTabChart( maStrm );
Eof();
GetTracer().TraceChartOnlySheet();
break;
case Biff8W: // workbook
OSL_FAIL( "ImportExcel8::Read - double workbook globals" );
SAL_FALLTHROUGH;
case Biff8V: // VB module
default:
// TODO: do not create a sheet in the Calc document
pD->SetVisible( nScTab, false );
XclTools::SkipSubStream( maStrm );
IncCurrScTab();
}
}
}
else
eCurrent = EXC_STATE_END;
}
else
aIn.StartNextRecord();
if( !aIn.IsValid() )
{
// #i63591# finalize table if EOF is missing
switch( eCurrent )
{
case EXC_STATE_SHEET_PRE:
eCurrent = EXC_STATE_SHEET;
aIn.SeekGlobalPosition();
continue; // next iteration in while loop
case EXC_STATE_SHEET:
Eof();
eCurrent = EXC_STATE_END;
break;
default:
eCurrent = EXC_STATE_END;
}
}
if( eCurrent == EXC_STATE_END )
break;
if( eCurrent != EXC_STATE_SHEET_PRE && eCurrent != EXC_STATE_GLOBALS_PRE )
pProgress->ProgressAbs( nProgressBaseSize + aIn.GetSvStreamPos() - nProgressBasePos );
nRecId = aIn.GetRecId();
/* #i39464# Ignore records between USERSVIEWBEGIN and USERSVIEWEND
completely (user specific view settings). Otherwise view settings
and filters are loaded multiple times, which at least causes
problems in auto-filters. */
switch( nRecId )
{
case EXC_ID_USERSVIEWBEGIN:
OSL_ENSURE( !bInUserView, "ImportExcel8::Read - nested user view settings" );
bInUserView = true;
break;
case EXC_ID_USERSVIEWEND:
OSL_ENSURE( bInUserView, "ImportExcel8::Read - not in user view settings" );
bInUserView = false;
break;
}
if( !bInUserView ) switch( eCurrent )
{
// before workbook globals: wait for initial workbook globals BOF
case EXC_STATE_BEFORE_GLOBALS:
{
if( nRecId == EXC_ID5_BOF )
{
OSL_ENSURE( GetBiff() == EXC_BIFF8, "ImportExcel8::Read - wrong BIFF version" );
Bof5();
if( pExcRoot->eDateiTyp == Biff8W )
{
eCurrent = EXC_STATE_GLOBALS_PRE;
maStrm.StoreGlobalPosition();
nBdshtTab = 0;
}
else if( pExcRoot->eDateiTyp == Biff8 )
{
// #i62752# possible to have BIFF8 sheet without globals
NewTable();
eCurrent = EXC_STATE_SHEET_PRE; // Shrfmla Prefetch, Row-Prefetch
bSheetHasCodeName = false; // reset
aIn.StoreGlobalPosition();
}
}
}
break;
// prefetch for workbook globals
case EXC_STATE_GLOBALS_PRE:
{
switch( nRecId )
{
case EXC_ID_EOF:
case EXC_ID_EXTSST:
/* #i56376# evil hack: if EOF for globals is missing,
simulate it. This hack works only for the bugdoc
given in the issue, where the sheet substreams
start directly after the EXTSST record. A future
implementation should be more robust against
missing EOFs. */
if( (nRecId == EXC_ID_EOF) ||
((nRecId == EXC_ID_EXTSST) && (maStrm.GetNextRecId() == EXC_ID5_BOF)) )
{
eCurrent = EXC_STATE_GLOBALS;
aIn.SeekGlobalPosition();
}
break;
case 0x12: DocProtect(); break; // PROTECT [ 5678]
case 0x13: DocPasssword(); break;
case 0x19: WinProtection(); break;
case 0x2F: // FILEPASS [ 2345 ]
eLastErr = XclImpDecryptHelper::ReadFilepass( maStrm );
if( eLastErr != ERRCODE_NONE )
eCurrent = EXC_STATE_END;
break;
case EXC_ID_FILESHARING: ReadFileSharing(); break;
case 0x3D: Window1(); break;
case 0x42: Codepage(); break; // CODEPAGE [ 2345 ]
case 0x85: Boundsheet(); break; // BOUNDSHEET [ 5 ]
case 0x8C: Country(); break; // COUNTRY [ 345 ]
// PALETTE follows XFs, but already needed while reading the XFs
case EXC_ID_PALETTE: rPal.ReadPalette( maStrm ); break;
}
}
break;
// workbook globals
case EXC_STATE_GLOBALS:
{
switch( nRecId )
{
case EXC_ID_EOF:
case EXC_ID_EXTSST:
/* #i56376# evil hack: if EOF for globals is missing,
simulate it. This hack works only for the bugdoc
given in the issue, where the sheet substreams
start directly after the EXTSST record. A future
implementation should be more robust against
missing EOFs. */
if( (nRecId == EXC_ID_EOF) ||
((nRecId == EXC_ID_EXTSST) && (maStrm.GetNextRecId() == EXC_ID5_BOF)) )
{
rNumFmtBfr.CreateScFormats();
rXFBfr.CreateUserStyles();
rPTableMgr.ReadPivotCaches( maStrm );
rNameMgr.ConvertAllTokens();
eCurrent = EXC_STATE_BEFORE_SHEET;
}
break;
case 0x0E: Precision(); break; // PRECISION
case 0x22: Rec1904(); break; // 1904 [ 2345 ]
case 0x56: break; // BUILTINFMTCNT[ 34 ]
case 0x8D: Hideobj(); break; // HIDEOBJ [ 345 ]
case 0xD3: SetHasBasic(); break;
case 0xDE: Olesize(); break;
case EXC_ID_CODENAME: ReadCodeName( aIn, true ); break;
case EXC_ID_USESELFS: ReadUsesElfs(); break;
case EXC_ID2_FONT: rFontBfr.ReadFont( maStrm ); break;
case EXC_ID4_FORMAT: rNumFmtBfr.ReadFormat( maStrm ); break;
case EXC_ID5_XF: rXFBfr.ReadXF( maStrm ); break;
case EXC_ID_STYLE: rXFBfr.ReadStyle( maStrm ); break;
case EXC_ID_SST: rSst.ReadSst( maStrm ); break;
case EXC_ID_TABID: rTabInfo.ReadTabid( maStrm ); break;
case EXC_ID_NAME: rNameMgr.ReadName( maStrm ); break;
case EXC_ID_EXTERNSHEET: rLinkMgr.ReadExternsheet( maStrm ); break;
case EXC_ID_SUPBOOK: rLinkMgr.ReadSupbook( maStrm ); break;
case EXC_ID_XCT: rLinkMgr.ReadXct( maStrm ); break;
case EXC_ID_CRN: rLinkMgr.ReadCrn( maStrm ); break;
case EXC_ID_EXTERNNAME: rLinkMgr.ReadExternname( maStrm, pFormConv.get() ); break;
case EXC_ID_MSODRAWINGGROUP:rObjMgr.ReadMsoDrawingGroup( maStrm ); break;
case EXC_ID_SXIDSTM: rPTableMgr.ReadSxidstm( maStrm ); break;
case EXC_ID_SXVS: rPTableMgr.ReadSxvs( maStrm ); break;
case EXC_ID_DCONREF: rPTableMgr.ReadDconref( maStrm ); break;
case EXC_ID_DCONNAME: rPTableMgr.ReadDConName( maStrm ); break;
}
}
break;
// prefetch for worksheet
case EXC_STATE_SHEET_PRE:
{
switch( nRecId )
{
// skip chart substream
case EXC_ID2_BOF:
case EXC_ID3_BOF:
case EXC_ID4_BOF:
case EXC_ID5_BOF: XclTools::SkipSubStream( maStrm ); break;
case EXC_ID_WINDOW2: rTabViewSett.ReadWindow2( maStrm, false );break;
case EXC_ID_SCL: rTabViewSett.ReadScl( maStrm ); break;
case EXC_ID_PANE: rTabViewSett.ReadPane( maStrm ); break;
case EXC_ID_SELECTION: rTabViewSett.ReadSelection( maStrm ); break;
case EXC_ID2_DIMENSIONS:
case EXC_ID3_DIMENSIONS: ReadDimensions(); break;
case EXC_ID_CODENAME: ReadCodeName( aIn, false ); bSheetHasCodeName = true; break;
case 0x0A: // EOF [ 2345 ]
{
eCurrent = EXC_STATE_SHEET;
OUString sName;
GetDoc().GetName( GetCurrScTab(), sName );
if ( !bSheetHasCodeName )
{
nTabsWithNoCodeName.push_back( GetCurrScTab() );
}
else
{
OUString sCodeName;
GetDoc().GetCodeName( GetCurrScTab(), sCodeName );
aCodeNames.push_back( sCodeName );
}
bSheetHasCodeName = false; // reset
aIn.SeekGlobalPosition(); // and back to old position
break;
}
case 0x12: SheetProtect(); break;
case 0x13: SheetPassword(); break;
case 0x42: Codepage(); break; // CODEPAGE [ 2345 ]
case 0x55: DefColWidth(); break;
case 0x7D: Colinfo(); break; // COLINFO [ 345 ]
case 0x81: Wsbool(); break; // WSBOOL [ 2345 ]
case 0x8C: Country(); break; // COUNTRY [ 345 ]
case 0x99: Standardwidth(); break; // STANDARDWIDTH[ 45 ]
case 0x9B: FilterMode(); break; // FILTERMODE
case EXC_ID_AUTOFILTERINFO: AutoFilterInfo(); break;// AUTOFILTERINFO
case EXC_ID_AUTOFILTER: AutoFilter(); break; // AUTOFILTER
case 0x0208: Row34(); break; // ROW [ 34 ]
case EXC_ID2_ARRAY:
case EXC_ID3_ARRAY: Array34(); break; // ARRAY [ 34 ]
case 0x0225: Defrowheight345();break;//DEFAULTROWHEI[ 345 ]
case 0x0867: FeatHdr(); break; // FEATHDR
case 0x0868: Feat(); break; // FEAT
}
}
break;
// worksheet
case EXC_STATE_SHEET:
{
switch( nRecId )
{
// skip unknown substreams
case EXC_ID2_BOF:
case EXC_ID3_BOF:
case EXC_ID4_BOF:
case EXC_ID5_BOF: XclTools::SkipSubStream( maStrm ); break;
case EXC_ID_EOF: Eof(); eCurrent = EXC_STATE_BEFORE_SHEET; break;
case EXC_ID2_BLANK:
case EXC_ID3_BLANK: ReadBlank(); break;
case EXC_ID2_INTEGER: ReadInteger(); break;
case EXC_ID2_NUMBER:
case EXC_ID3_NUMBER: ReadNumber(); break;
case EXC_ID2_LABEL:
case EXC_ID3_LABEL: ReadLabel(); break;
case EXC_ID2_BOOLERR:
case EXC_ID3_BOOLERR: ReadBoolErr(); break;
case EXC_ID_RK: ReadRk(); break;
case EXC_ID2_FORMULA:
case EXC_ID3_FORMULA:
case EXC_ID4_FORMULA: Formula25(); break;
case EXC_ID_SHRFMLA: Shrfmla(); break;
case 0x000C: Calccount(); break; // CALCCOUNT
case 0x0010: Delta(); break; // DELTA
case 0x0011: Iteration(); break; // ITERATION
case 0x007E:
case 0x00AE: Scenman(); break; // SCENMAN
case 0x00AF: Scenario(); break; // SCENARIO
case 0x00BD: Mulrk(); break; // MULRK [ 5 ]
case 0x00BE: Mulblank(); break; // MULBLANK [ 5 ]
case 0x00D6: Rstring(); break; // RSTRING [ 5 ]
case 0x00E5: Cellmerging(); break; // CELLMERGING
case 0x00FD: Labelsst(); break; // LABELSST [ 8 ]
case 0x0236: TableOp(); break; // TABLE
case EXC_ID_HORPAGEBREAKS:
case EXC_ID_VERPAGEBREAKS: rPageSett.ReadPageBreaks( maStrm ); break;
case EXC_ID_HEADER:
case EXC_ID_FOOTER: rPageSett.ReadHeaderFooter( maStrm ); break;
case EXC_ID_LEFTMARGIN:
case EXC_ID_RIGHTMARGIN:
case EXC_ID_TOPMARGIN:
case EXC_ID_BOTTOMMARGIN: rPageSett.ReadMargin( maStrm ); break;
case EXC_ID_PRINTHEADERS: rPageSett.ReadPrintHeaders( maStrm ); break;
case EXC_ID_PRINTGRIDLINES: rPageSett.ReadPrintGridLines( maStrm ); break;
case EXC_ID_HCENTER:
case EXC_ID_VCENTER: rPageSett.ReadCenter( maStrm ); break;
case EXC_ID_SETUP: rPageSett.ReadSetup( maStrm ); break;
case EXC_ID8_IMGDATA: rPageSett.ReadImgData( maStrm ); break;
case EXC_ID_MSODRAWING: GetCurrSheetDrawing().ReadMsoDrawing( maStrm ); break;
// #i61786# weird documents: OBJ without MSODRAWING -> read in BIFF5 format
case EXC_ID_OBJ: GetCurrSheetDrawing().ReadObj( maStrm ); break;
case EXC_ID_NOTE: GetCurrSheetDrawing().ReadNote( maStrm ); break;
case EXC_ID_HLINK: XclImpHyperlink::ReadHlink( maStrm ); break;
case EXC_ID_LABELRANGES: XclImpLabelranges::ReadLabelranges( maStrm ); break;
case EXC_ID_CONDFMT: rCondFmtMgr.ReadCondfmt( maStrm ); break;
case EXC_ID_CF: rCondFmtMgr.ReadCF( maStrm ); break;
case EXC_ID_DVAL: XclImpValidationManager::ReadDval( maStrm ); break;
case EXC_ID_DV: rValidMgr.ReadDV( maStrm ); break;
case EXC_ID_QSI: rWQBfr.ReadQsi( maStrm ); break;
case EXC_ID_WQSTRING: rWQBfr.ReadWqstring( maStrm ); break;
case EXC_ID_PQRY: rWQBfr.ReadParamqry( maStrm ); break;
case EXC_ID_WQSETT: rWQBfr.ReadWqsettings( maStrm ); break;
case EXC_ID_WQTABLES: rWQBfr.ReadWqtables( maStrm ); break;
case EXC_ID_SXVIEW: rPTableMgr.ReadSxview( maStrm ); break;
case EXC_ID_SXVD: rPTableMgr.ReadSxvd( maStrm ); break;
case EXC_ID_SXVI: rPTableMgr.ReadSxvi( maStrm ); break;
case EXC_ID_SXIVD: rPTableMgr.ReadSxivd( maStrm ); break;
case EXC_ID_SXPI: rPTableMgr.ReadSxpi( maStrm ); break;
case EXC_ID_SXDI: rPTableMgr.ReadSxdi( maStrm ); break;
case EXC_ID_SXVDEX: rPTableMgr.ReadSxvdex( maStrm ); break;
case EXC_ID_SXEX: rPTableMgr.ReadSxex( maStrm ); break;
case EXC_ID_SHEETEXT: rTabViewSett.ReadTabBgColor( maStrm, rPal ); break;
case EXC_ID_SXVIEWEX9: rPTableMgr.ReadSxViewEx9( maStrm ); break;
case EXC_ID_SXADDL: rPTableMgr.ReadSxAddl( maStrm ); break;
}
}
break;
default:;
}
}
if( eLastErr == ERRCODE_NONE )
{
// In some strange circumstances a the codename might be missing
// # Create any missing Sheet CodeNames
std::vector < SCTAB >::iterator it_end = nTabsWithNoCodeName.end();
for ( std::vector < SCTAB >::iterator it = nTabsWithNoCodeName.begin(); it != it_end; ++it )
{
SCTAB nTab = 1;
while ( true )
{
OUStringBuffer aBuf;
aBuf.append("Sheet");
aBuf.append(static_cast<sal_Int32>(nTab++));
OUString sTmpName = aBuf.makeStringAndClear();
std::vector<OUString>::iterator codeName_It = aCodeNames.begin();
std::vector<OUString>::iterator codeName_It_end = aCodeNames.end();
// search for codename
for ( ; codeName_It != codeName_It_end; ++codeName_It )
{
if ( *codeName_It == sTmpName )
break;
}
if ( codeName_It == codeName_It_end ) // generated codename not found
{
// Set new codename
GetDoc().SetCodeName( *it, sTmpName );
// Record newly used codename
aCodeNames.push_back(sTmpName);
// Record those we have created so they can be created in basic
maAutoGeneratedCodeNames.push_back( sTmpName );
break;
}
}
}
// #i45843# Convert pivot tables before calculation, so they are available
// for the GETPIVOTDATA function.
if( GetBiff() == EXC_BIFF8 )
GetPivotTableManager().ConvertPivotTables();
ScDocumentImport& rDoc = GetDocImport();
rDoc.finalize();
pProgress.reset();
#if 0
// Excel documents look much better without this call; better in the
// sense that the row heights are identical to the original heights in
// Excel.
if ( !pD->IsAdjustHeightLocked())
AdjustRowHeight();
#endif
PostDocLoad();
pD->CalcAfterLoad(false);
// import change tracking data
XclImpChangeTrack aImpChTr( GetRoot(), maStrm );
aImpChTr.Apply();
const XclImpAddressConverter& rAddrConv = GetAddressConverter();
if( rAddrConv.IsTabTruncated() )
eLastErr = SCWARN_IMPORT_SHEET_OVERFLOW;
else if( bTabTruncated || rAddrConv.IsRowTruncated() )
eLastErr = SCWARN_IMPORT_ROW_OVERFLOW;
else if( rAddrConv.IsColTruncated() )
eLastErr = SCWARN_IMPORT_COLUMN_OVERFLOW;
if( GetBiff() == EXC_BIFF8 )
GetPivotTableManager().MaybeRefreshPivotTables();
}
return eLastErr;
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V560 A part of conditional expression is always true: (nRecId == EXC_ID_EXTSST).
↑ V560 A part of conditional expression is always true: (nRecId == EXC_ID_EXTSST).